The DOI matches its Crossref record; 33 of the 33 references it cites were found in a registry or an index.
A Review of Vat Photopolymerization Technology: Materials, Applications, Challenges, and Future Trends of 3D Printing
Open accessAbstract
Additive manufacturing (3D printing) has significantly changed the prototyping process in terms of technology, construction, materials, and their multiphysical properties. Among the most popular 3D printing techniques is vat photopolymerization, in which ultraviolet (UV) light is deployed to form chains between molecules of liquid light-curable resin, crosslink them, and as a result, solidify the resin. In this manuscript, three photopolymerization technologies, namely, stereolithography (SLA), digital light processing (DLP), and continuous digital light processing (CDLP), are reviewed. Additionally, the after-cured mechanical properties of light-curable resin materials are listed, along with a number of case studies showing their applications in practice. The manuscript aims at providing an overview and future trend of the photopolymerization technology to inspire the readers to engage in further research in this field, especially regarding developing new materials and mathematical models for microrods and bionic structures.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Continuous liquid interface production of 3D objects
Tumbleston, J. R., Shirvanyants, D., Ermoshkin, N., Janusziewicz, R., Johnson, A. R., Kelly, D., Chen, K., Pinschmidt, R., Rolland, J. P., Ermoshkin, A., et al. (2015) · Science · doi:10.1126/science.aaa2397 · Cited by 2,278
Recent advances in 3D printing of biomaterials
Chia, H. N., & Wu, B. M. (2015) · Journal of Biological Engineering · doi:10.1186/s13036-015-0001-4 · Cited by 1,734
Printing soft matter in three dimensions
Truby, R. L., & Lewis, J. A. (2016) · Nature · doi:10.1038/nature21003 · Cited by 1,622
Photopolymerization in 3D Printing
Bagheri, A., & Jin, J. (2019) · ACS Applied Polymer Materials · doi:10.1021/acsapm.8b00165 · Cited by 1,436
Organ printing: computer-aided jet-based 3D tissue engineering
Mironov, V., Boland, T., Trusk, T., Forgacs, G., & Markwald, R. R. (2003) · Trends in Biotechnology · doi:10.1016/s0167-7799(03)00033-7 · Cited by 1,276
The bioink: A comprehensive review on bioprintable materials
Hospodiuk, M., Dey, M., Sosnoski, D., & Ozbolat, I. T. (2017) · Biotechnology Advances · doi:10.1016/j.biotechadv.2016.12.006 · Cited by 1,118
Printing and Prototyping of Tissues and Scaffolds
Derby, B. (2012) · Science · doi:10.1126/science.1226340 · Cited by 1,108
Advances in 4D Printing: Materials and Applications
Kuang, X., Roach, D. J., Wu, J., Hamel, C. M., Ding, Z., Wang, T., Dunn, M. L., & Qi, H. J. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201805290 · Cited by 1,095
Volumetric additive manufacturing via tomographic reconstruction
Kelly, B. E., Bhattacharya, I., Heidari, H., Shusteff, M., Spadaccini, C. M., & Taylor, H. K. (2019) · Science · doi:10.1126/science.aau7114 · Cited by 1,025
3D Printing of Shape Memory Polymers for Flexible Electronic Devices
Zarek, M., Layani, M., Cooperstein, I., Sachyani, E., Cohn, D., & Magdassi, S. (2016) · Advanced Materials · doi:10.1002/adma.201503132 · Cited by 903
Recent trends in bioinks for 3D printing
Gopinathan, J., & Noh, I. (2018) · Biomaterials Research · doi:10.1186/s40824-018-0122-1 · Cited by 846
Hybrid 3D Printing of Soft Electronics
Valentine, A. D., Busbee, T. A., Boley, J. W., Raney, J. R., Chortos, A., Kotikian, A., Berrigan, J. D., Durstock, M. F., & Lewis, J. A. (2017) · Advanced Materials · doi:10.1002/adma.201703817 · Cited by 688
Topology Optimized Architectures with Programmable Poisson's Ratio over Large Deformations
Clausen, A., Wang, F., Jensen, J. S., Sigmund, O., & Lewis, J. A. (2015) · Advanced Materials · doi:10.1002/adma.201502485 · Cited by 551
Farsari, M., & Chichkov, B. N. (2009) · Nature Photonics · doi:10.1038/nphoton.2009.131 · Cited by 466
High-resolution tomographic volumetric additive manufacturing
Loterie, D., Delrot, P., & Moser, C. (2020) · Nature Communications · doi:10.1038/s41467-020-14630-4 · Cited by 461
Biological Laser Printing: A Novel Technique for Creating Heterogeneous 3-dimensional Cell Patterns
Barron, J. A., Wu, P., Ladouceur, H. D., & Ringeisen, B. R. (2004) · Biomedical Microdevices · doi:10.1023/b:bmmd.0000031751.67267.9f · Cited by 435
A review on the processing accuracy of two-photon polymerization
Zhou, X., Hou, Y., & Lin, J. (2015) · AIP Advances · doi:10.1063/1.4916886 · Cited by 422
Photopolymer Materials and Processes for Advanced Technologies
Crivello, J. V., & Reichmanis, E. (2014) · Chemistry of Materials · doi:10.1021/cm402262g · Cited by 406
4D Printed Actuators with Soft-Robotic Functions
López‐Valdeolivas, M., Liu, D., Broer, D. J., & Sánchez‐Somolinos, C. (2018) · Macromolecular Rapid Communications · doi:10.1002/marc.201700710 · Cited by 371
Layerless fabrication with continuous liquid interface production
Janusziewicz, R., Tumbleston, J. R., Quintanilla, A. L., Mecham, S. J., & DeSimone, J. M. (2016) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1605271113 · Cited by 332
Three‐Dimensional Printing of Elastomeric, Cellular Architectures with Negative Stiffness
Duoss, E. B., Weisgraber, T. H., Hearon, K., Zhu, C., Small, W., Metz, T. R., Vericella, J. J., Barth, H. D., Kuntz, J. D., Maxwell, R. S., et al. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201400451 · Cited by 316
Stereolithography: Materials, Processes and Applications
(2011) · Springer eBooks · doi:10.1007/978-0-387-92904-0 · Cited by 304
3D printing for membrane separation, desalination and water treatment
Tijing, L. D., Dizon, J. R. C., Ibrahim, I., Nisay, A. R. N., Shon, H. K., & Advincula, R. C. (2020) · Applied Materials Today · doi:10.1016/j.apmt.2019.100486 · Cited by 269
Multimaterial 3D Printing of Highly Stretchable Silicone Elastomers
Zhou, L.-Y., Gao, Q., Fu, J.-Z., Chen, Q.-Y., Zhu, J.-P., Sun, Y., & He, Y. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b04873 · Cited by 237
Tawk, C., in het Panhuis, M., Spinks, G. M., & Alici, G. (2018) · Soft Robotics · doi:10.1089/soro.2018.0021 · Cited by 178
Cui, H., Zhu, W., Holmes, B. B., & Zhang, L. G. (2016) · Advanced Science · doi:10.1002/advs.201600058 · Cited by 155
Studying Cell Mechanobiology in 3D: The Two-Photon Lithography Approach
Lemma, E. D., Spagnolo, B., Vittorio, M. D., & Pisanello, F. (2018) · Trends in biotechnology · doi:10.1016/j.tibtech.2018.09.008 · Cited by 119
Sensitive Photoresists for Rapid Multiphoton 3D Laser Micro‐ and Nanoprinting
Kiefer, P., Hahn, V., Nardi, M., Yang, L., Blasco, E., Barner‐Kowollik, C., & Wegener, M. (2020) · Advanced Optical Materials · doi:10.1002/adom.202000895 · Cited by 119
Huang, B., Hu, R. H., Xue, Z., Zhao, J., Li, Q., Xia, T. D., Zhang, W., & Lu, C. (2019) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2019.115736 · Cited by 92
Hsieh, T. M., Benjamin Ng, C. W., Narayanan, K., Wan, A. C. A., & Ying, J. Y. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.06.029 · Cited by 77
Jang, E. H., Kim, J.-H., Lee, J. S., Kim, D., & Youn, Y. (2020) · Polymers · doi:10.3390/polym12030538 · Cited by 41
3D Bioprinting of Novel Biocompatible Scaffolds for Endothelial Cell Repair
Wu, Y., Heikal, L., Ferns, G. A., Ghezzi, P., Nokhodchi, A., & Maniruzzaman, M. (2019) · Polymers · doi:10.3390/polym11121924 · Cited by 28
Gupta, T., Strelcov, E., Holland, G. E., Schumacher, J. D., Yang, Y., Esch, M. B., Aksyuk, V., Zeller, P., Amati, M., Gregoratti, L., et al. (2020) · ACS Nano · doi:10.1021/acsnano.0c04266 · Cited by 27
Cited by
Additive Manufacturing: A Comprehensive Review
Zhou, L., Miller, J., Vezza, J., Mayster, M., Raffay, M., Justice, Q., Al Tamimi, Z., Hansotte, G., Sunkara, L. D., & Bernat, J. (2024) · Sensors · doi:10.3390/s24092668 · Cited by 599
Kafle, A., Luis, E., Silwal, R., Pan, H. M., Shrestha, P. L., & Bastola, A. K. (2021) · Polymers · doi:10.3390/polym13183101 · Cited by 587
Additive manufacturing by digital light processing: a review
Chaudhary, R., Fabbri, P., Leoni, E., Mazzanti, F., Akbari, R., & Antonini, C. (2023) · Progress in Additive Manufacturing · doi:10.1007/s40964-022-00336-0 · Cited by 450
Wu, Y., Fang, J., Wu, C., Li, C., Sun, G., & Li, Q. (2023) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2023.108102 · Cited by 440
Wang, H., Zhang, W., Ladika, D., Yu, H., Gailevičius, D., Wang, H., Pan, C., Nair, P. N. S., Ke, Y., Mori, T., et al. (2023) · Advanced Functional Materials · doi:10.1002/adfm.202214211 · Cited by 401
Metadata
- Authors
- Pagac, M., Hajnys, J., Ma, Q.-P., Jancar, L., Jansa, J., Stefek, P., & Mesicek, J.
- Venue
- Polymers
- Publisher
- MDPI AG
- Published
- 2021-02-17
- Volume
- 13
- Issue
- 4
- Pages
- 598
- ISSN
- 2073-4360 (ISSN-L)
- OpenAlex
- W3132122477
- Cited by
- 834
- References
- 33
- FWCI
- 39.84
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.