Variation in Hydrogel Formation and Network Structure for Telo-, Atelo- and Methacrylated Collagens
Open accessThe DOI matches its Crossref record; 60 of the 60 references it cites were found in a registry or an index.
Abstract
As the most abundant protein in the extracellular matrix, collagen has become widely studied in the fields of tissue engineering and regenerative medicine. Of the various collagen types, collagen type I is the most commonly utilised in laboratory studies. In tissues, collagen type I forms into fibrils that provide an extended fibrillar network. In tissue engineering and regenerative medicine, little emphasis has been placed on the nature of the network that is formed. Various factors could affect the network structure, including the method used to extract collagen from native tissue, since this may remove the telopeptides, and the nature and extent of any chemical modifications and crosslinking moieties. The structure of any fibril network affects cellular proliferation and differentiation, as well as the overall modulus of hydrogels. In this study, the network-forming properties of two distinct forms of collagen (telo- and atelo-collagen) and their methacrylated derivatives were compared. The presence of the telopeptides facilitated fibril formation in the unmodified samples, but this benefit was substantially reduced by subsequent methacrylation, leading to a loss in the native self-assembly potential. Furthermore, the impact of the methacrylation of the collagen, which enables rapid crosslinking and makes it suitable for use in 3D printing, was investigated. The crosslinking of the methacrylated samples (both telo- and atelo-) was seen to improve the fibril-like network compared to the non-crosslinked samples. This contrasted with the samples of methacrylated gelatin, which showed little, if any, fibrillar or ordered network structure, regardless of whether they were crosslinked.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures






Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“Methacrylation of collagen (ColMA) has emerged as an effective strategy to address these drawbacks by introducing photocrosslinkable methacrylate groups, enabling rapid photopolymerization and improving structural stability while preserving the inherent bioactivity of collagen [12,13,14].”
From Montmorillonite-reinforced methacrylated collagen/methacrylated silk fibroin hydrogel-based inks: rheological and physicochemical characterization for bone scaffold applications (2026) · cites this paper as [13]
Experimental — accuracy not yet measured
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Cell-laden microengineered gelatin methacrylate hydrogels
Nichol, J. W., Koshy, S. T., Bae, H., Hwang, C. M., Yamanlar, S., & Khademhosseini, A. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.03.064 · Cited by 2,377 · cited 4×
“These results were consistent with other reports, in which a similar molar excess of reagent was used [21,22].”
BackgroundResultInfluentialRicard-Blum, S. (2011) · Cold Spring Harbor Perspectives in Biology · doi:10.1101/cshperspect.a004978 · Cited by 2,305 · cited 1×
“The collagen family consists of 28 distinct types [7], of which type I collagen, the main component of skin, tendon, ligaments, and bone, is the most abundant.”
BackgroundBell, E., Ivarsson, B., & Merrill, C. (1979) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.76.3.1274 · Cited by 2,067 · cited 1×
“The collagen in these gels has a native, strong interaction with cells, which leads to the consolidation of the hydrogel into a more tissue-like structure [54].”
BackgroundMurphy, C. M., Haugh, M. G., & O'Brien, F. J. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2009.09.063 · Cited by 2,056 · cited 1×
“Collagen, both in its native form and also in its denatured form, gelatin, is able to form highly hydrated networks, termed hydrogels, which have been widely used in regenerative medicine, through printing or casting [1,2], to create 3D environments for cell proliferation and differentiation [3,4].”
BackgroundDetermination of free amino groups in proteins by trinitrobenzenesulfonic acid
Habeeb, A. F. S. A. (1966) · Analytical Biochemistry · doi:10.1016/0003-2697(66)90275-2 · Cited by 2,038 · cited 2×
“The extent of collagen modification was determined in triplicate using a 2,4,6- Polymers 2022, 14, 1775 3 of 14 trinitrobenzene sulfonic acid (TNBSA) assay (Thermo Scientific, Waltham, MA, USA) [20], following the manufacturer’s instructions.”
MethodMyotubes differentiate optimally on substrates with tissue-like stiffness
Engler, A. J., Griffin, M. A., Sen, S., Bönnemann, C. G., Sweeney, H. L., & Discher, D. E. (2004) · The Journal of Cell Biology · doi:10.1083/jcb.200405004 · Cited by 1,743 · cited 1×
“Stem cells can differentiate towards these lineages via cues such as scaffold stiffness [37,38].”
BackgroundPhotopolymerizable hydrogels for tissue engineering applications
Nguyen, K. T., & West, J. L. (2002) · Biomaterials · doi:10.1016/s0142-9612(02)00175-8 · Cited by 1,669 · cited 1×
“Hydrogels have gained significant interest in tissue engineering and regenerative medicine for the delivery of cells to form new replacement tissues [32,33].”
BackgroundStructural and Rheological Properties of Methacrylamide Modified Gelatin Hydrogels
Van Den Bulcke, A. I., Bogdanov, B., De Rooze, N., Schacht, E. H., Cornelissen, M., & Berghmans, H. (2000) · Biomacromolecules · doi:10.1021/bm990017d · Cited by 1,536 · cited 1×
“One method that has gained importance is the prior methacrylation of gelatin [14] or collagen [15], followed by exposure to UV light with an initiator present, which allows casting or printing.”
MethodKADLER, K. E., HOLMES, D. F., TROTTER, J. A., & CHAPMAN, J. A. (1996) · Biochemical Journal · doi:10.1042/bj3160001 · Cited by 1,449 · cited 1×
“Type I collagen contains numerous different cellular interaction sites [39,40].”
Background25th Anniversary Article: Rational Design and Applications of Hydrogels in Regenerative Medicine
Annabi, N., Tamayol, A., Uquillas, J. A., Akbari, M., Bertassoni, L. E., Cha, C., Camci‐Unal, G., Dokmeci, M. R., Peppas, N. A., & Khademhosseini, A. (2014) · Advanced Materials · doi:10.1002/adma.201303233 · Cited by 1,409
Substrate Modulus Directs Neural Stem Cell Behavior
Saha, K., Keung, A. J., Irwin, E. F., Li, Y., Little, L., Schaffer, D. V., & Healy, K. E. (2008) · Biophysical Journal · doi:10.1529/biophysj.108.132217 · Cited by 1,092
Structural Basis of Collagen Recognition by Integrin α2β1
Emsley, J., Knight, C. G., Farndale, R. W., Barnes, M. J., & Liddington, R. C. (2000) · Cell · doi:10.1016/s0092-8674(00)80622-4 · Cited by 1,005 · cited 1×
“However, linear RGD sequences become available, after being hidden by the triple-helical conformation that internalises the Gly residue, so that integrin binding can occur, albeit by a different path to that seen on triple-helical collagen [43].”
BackgroundSmart Hydrogels in Tissue Engineering and Regenerative Medicine
Mantha, S., Pillai, S., Khayambashi, P., Upadhyay, A., Zhang, Y., Tao, O., Pham, H. M., & Tran, S. D. (2019) · Materials · doi:10.3390/ma12203323 · Cited by 857 · cited 1×
“Hydrogels have gained significant interest in tissue engineering and regenerative medicine for the delivery of cells to form new replacement tissues [32,33].”
BackgroundCollagen scaffolds for tissue engineering
Glowacki, J., & Mizuno, S. (2008) · Biopolymers · doi:10.1002/bip.20871 · Cited by 797 · cited 1×
“Collagen, both in its native form and also in its denatured form, gelatin, is able to form highly hydrated networks, termed hydrogels, which have been widely used in regenerative medicine, through printing or casting [1,2], to create 3D environments for cell proliferation and differentiation [3,4].”
Background[2] Preparation and characterization of the different types of collagen
Miller, E. J., & Kent Rhodes, R. (1982) · Methods in Enzymology · doi:10.1016/0076-6879(82)82059-4 · Cited by 752 · cited 1×
“Atelo-collagen, which is generally obtained through the digestion of tissues by pepsin [55], can also form into hydrogels, but the rate of formation is much slower (Figure 3A).”
BackgroundAntoine, E. E., Vlachos, P. P., & Rylander, M. N. (2014) · Tissue Engineering Part B: Reviews · doi:10.1089/ten.teb.2014.0086 · Cited by 611 · cited 1×
“The formation of collagen hydrogels through warming neutral solutions is well established [9,44], with the variations in the hydrogel structure determined by the source [45], concentration [46], incubation temperature [47], pH [48] and ionic strength [49] of the collagen solution.”
BackgroundInfrared spectroscopy of collagen and collagen‐like polypeptides
Doyle, B. B., Bendit, E. G., & Blout, E. R. (1975) · Biopolymers · doi:10.1002/bip.1975.360140505 · Cited by 584 · cited 1×
“A mixture of other centrosymmetric structures may have been present, with at least four fibrous-long-spacing (FLS) packing modes having been observed [58].”
BackgroundRajan, N., Habermehl, J., Coté, M.-F., Doillon, C. J., & Mantovani, D. (2006) · Nature Protocols · doi:10.1038/nprot.2006.430 · Cited by 577 · cited 1×
“Louis, MO, USA), at 4 ◦C for 16 h [18].”
The collagen triple-helix structure
Brodsky, B., & Ramshaw, J. A. M. (1997) · Matrix Biology · doi:10.1016/s0945-053x(97)90030-5 · Cited by 532 · cited 2×
“The amino acid sequence controls the secondary and tertiary molecular structure, with collagens that are characterised by a repeating (Gly-Xaa-Yaa)n sequence; only Gly is small enough to fit within the triple-helical conformation [8].”
BackgroundSelf-citationRational design of hydrogels for tissue engineering: Impact of physical factors on cell behavior
Brandl, F., Sommer, F., & Goepferich, A. (2007) · Biomaterials · doi:10.1016/j.biomaterials.2006.09.017 · Cited by 496 · cited 1×
“Various biofabrication and regenerative medicine approaches rely on hydrogels with specific Young’s moduli to best facilitate cellular differentiation, diffusion and mechanical robustness [34,35].”
BackgroundGly-X-Y Tripeptide Frequencies in Collagen: A Context for Host–Guest Triple-Helical Peptides
Ramshaw, J. A. M., Shah, N. K., & Brodsky, B. (1998) · Journal of Structural Biology · doi:10.1006/jsbi.1998.3977 · Cited by 408 · cited 1×
“In collagens, Lys residues are found preferentially in the Yaa position [62] and of these, several may be subject to secondary modification to give hydroxylysine, some of which may be additionally glycosylated, potentially further reducing their reactivity.”
BackgroundSelf-citationThe Heat Precipitation of Collagen from Neutral Salt Solutions: Some Rate-Regulating Factors
Gross, J., & Kirk, D. (1958) · Journal of Biological Chemistry · doi:10.1016/s0021-9258(18)64764-7 · Cited by 365 · cited 2×
“A major property of type I collagen is that when heated to 37 ◦C at neutral pH, purified, soluble type I collagen molecules contain sufficient binding domains to reform into fibrils, which, in turn, entangle to form a hydrogel [9].”
BackgroundSweeney, S. M., Orgel, J. P., Fertala, A., McAuliffe, J. D., Turner, K. R., Di Lullo, G. A., Chen, S., Antipova, O., Perumal, S., Ala-Kokko, L., et al. (2008) · Journal of Biological Chemistry · doi:10.1074/jbc.m709319200 · Cited by 287 · cited 1×
“Type I collagen contains numerous different cellular interaction sites [39,40].”
BackgroundZhang, Y., Liu, W., Li, G., Shi, B., Miao, Y., & Wu, X. (2007) · Food Chemistry · doi:10.1016/j.foodchem.2006.09.053 · Cited by 264 · cited 1×
“The chemical modification of collagens can lower the stability of the triple helix [12,23].”
BackgroundHoch, E., Schuh, C., Hirth, T., Tovar, G. E. M., & Borchers, K. (2012) · Journal of Materials Science: Materials in Medicine · doi:10.1007/s10856-012-4731-2 · Cited by 254 · cited 2×
“These results were consistent with other reports, in which a similar molar excess of reagent was used [21,22].”
ResultBrinkman, W. T., Nagapudi, K., Thomas, B. S., & Chaikof, E. L. (2003) · Biomacromolecules · doi:10.1021/bm0257412 · Cited by 246 · cited 2×
“The initial and preferred method of methacrylation for collagen was achieved using methacrylic anhydride [15], although other approaches, involving reactions using carbodiimides [16] and N-hydroxysuccinimide derivatives, are possible [17].”
MethodPore size variable type I collagen gels and their interaction with glioma cells
Yang, Y.-L., Motte, S., & Kaufman, L. J. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.03.039 · Cited by 224 · cited 1×
“The formation of collagen hydrogels through warming neutral solutions is well established [9,44], with the variations in the hydrogel structure determined by the source [45], concentration [46], incubation temperature [47], pH [48] and ionic strength [49] of the collagen solution.”
BackgroundMiron-Mendoza, M., Seemann, J., & Grinnell, F. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.04.064 · Cited by 223 · cited 1×
“The formation of collagen hydrogels through warming neutral solutions is well established [9,44], with the variations in the hydrogel structure determined by the source [45], concentration [46], incubation temperature [47], pH [48] and ionic strength [49] of the collagen solution.”
BackgroundAchilli, M., & Mantovani, D. (2010) · Polymers · doi:10.3390/polym2040664 · Cited by 214 · cited 1×
“The formation of collagen hydrogels through warming neutral solutions is well established [9,44], with the variations in the hydrogel structure determined by the source [45], concentration [46], incubation temperature [47], pH [48] and ionic strength [49] of the collagen solution.”
BackgroundYamamura, N., Sudo, R., Ikeda, M., & Tanishita, K. (2007) · Tissue Engineering · doi:10.1089/ten.2006.0333 · Cited by 190 · cited 1×
“The formation of collagen hydrogels through warming neutral solutions is well established [9,44], with the variations in the hydrogel structure determined by the source [45], concentration [46], incubation temperature [47], pH [48] and ionic strength [49] of the collagen solution.”
BackgroundMolecular and structural mapping of collagen fibril interactions
Orgel, J. P. R. O., San Antonio, J. D., & Antipova, O. (2011) · Connective Tissue Research · doi:10.3109/03008207.2010.511353 · Cited by 187 · cited 1×
“Some of these binding sites occur on isolated molecules, while others require a larger, properly formed fibrillar site to be present [41].”
BackgroundKroehne, V., Heschel, I., Schügner, F., Lasrich, D., Bartsch, J. W., & Jockusch, H. (2008) · Journal of Cellular and Molecular Medicine · doi:10.1111/j.1582-4934.2008.00238.x · Cited by 171 · cited 1×
“Collagen, both in its native form and also in its denatured form, gelatin, is able to form highly hydrated networks, termed hydrogels, which have been widely used in regenerative medicine, through printing or casting [1,2], to create 3D environments for cell proliferation and differentiation [3,4].”
BackgroundCollagen I Self-Assembly: Revealing the Developing Structures that Generate Turbidity
Zhu, J., & Kaufman, L. J. (2014) · Biophysical Journal · doi:10.1016/j.bpj.2014.03.011 · Cited by 165 · cited 1×
“Studies have demonstrated a lag phase (where no change in modulus occurred as molecules heated and began or organise), of around 10 min, depending on the conditions, which suggests that fibril nucleation occurred, followed by an increase in turbidity as fibril formation, thickening and growth continued [26,27].”
BackgroundCollagen fibril formation in vitro. The role of the nonhelical terminal regions.
Gelman, R. A., Poppke, D. C., & Piez, K. A. (1979) · Journal of Biological Chemistry · doi:10.1016/s0021-9258(19)86545-6 · Cited by 162
THE SENSITIVITY OF GEL ELECTROPHORESIS AS A DETECTOR OF GENETIC VARIATION
Ramshaw, J. A. M., Coyne, J. A., & Lewontin, R. C. (1979) · Genetics · doi:10.1093/genetics/93.4.1019 · Cited by 154
Self-citationThe mechanism of nucleation for in vitro collagen fibril formation
Comper, W. D., & Veis, A. (1977) · Biopolymers · doi:10.1002/bip.1977.360161004 · Cited by 152 · cited 1×
“Studies have demonstrated a lag phase (where no change in modulus occurred as molecules heated and began or organise), of around 10 min, depending on the conditions, which suggests that fibril nucleation occurred, followed by an increase in turbidity as fibril formation, thickening and growth continued [26,27].”
BackgroundKreger, S. T., Bell, B. J., Bailey, J., Stites, E., Kuske, J., Waisner, B., & Voytik‐Harbin, S. L. (2010) · Biopolymers · doi:10.1002/bip.21431 · Cited by 147 · cited 1×
“The formation of collagen hydrogels through warming neutral solutions is well established [9,44], with the variations in the hydrogel structure determined by the source [45], concentration [46], incubation temperature [47], pH [48] and ionic strength [49] of the collagen solution.”
BackgroundQuantitative electron microscope observations of the collagen fibrils in rat‐tail tendon
Parry, D. A. D., & Craig, A. S. (1977) · Biopolymers · doi:10.1002/bip.1977.360160506 · Cited by 137 · cited 2×
“The diameters of the individual fibrils were typically between 20 and 50 nm, similar to the size seen in immature tissue [30], but not always as well formed.”
BackgroundInhibition of the Self-assembly of Collagen I into Fibrils with Synthetic Peptides
Prockop, D. J., & Fertala, A. (1998) · Journal of Biological Chemistry · doi:10.1074/jbc.273.25.15598 · Cited by 134 · cited 1×
“The 26-residue C-telopeptide is important in the initiation and rate of fibril formation [10] and, hence, in gelation.”
BackgroundThe Staining Pattern of Collagen Fibrils: I. an Analysis of Electron Micrographs
Chapman, J. A. (1974) · Connective Tissue Research · doi:10.3109/03008207409152099 · Cited by 118 · cited 1×
“Each repeating band consisted of a 30 nm “overlap” zone and a 37 nm “gap” zone, which led to the observed banding through different rates of stain uptake [53].”
BackgroundCollagen Structure-Function Mapping Informs Applications for Regenerative Medicine
Antonio, J. D. S., Jacenko, O., Fertala, A., & Orgel, J. P. R. O. (2020) · Bioengineering · doi:10.3390/bioengineering8010003 · Cited by 117 · cited 1×
“Collagen is suitable for use in regenerative medicine because it is abundant in the extracellular matrix (ECM), where it self-assembles and interacts with other collagens and with a wide range of other ECM molecules and cells [5,6].”
BackgroundCollagen fibrillogenesis in vitro: Comparison of types I, II, and III
Birk, D. E., & Silver, F. H. (1984) · Archives of Biochemistry and Biophysics · doi:10.1016/0003-9861(84)90266-2 · Cited by 111 · cited 2×
“Turbidity has frequently been used to study the formation of collagen gels by heating cold, neutral solutions to 37 °C [11,25].”
MethodExtraction and characterization of collagen with or without telopeptides from chicken skin
Cliche, S., Amiot, J., Avezard, C., & Gariepy, C. (2003) · Poultry Science · doi:10.1093/ps/82.3.503 · Cited by 108 · cited 1×
“Other collagens that could be acid-extracted in good yield with intact telopeptides include marine collagens [50] and chicken collagen [51].”
BackgroundBioactive hydrogels based on Designer Collagens
Cosgriff‐Hernandez, E., Hahn, M. S., Russell, B. H., Wilems, T. S., Munoz‐Pinto, D. J., Browning, M. B., Rivera, J. J., & Höök, M. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2010.05.002 · Cited by 104 · cited 1×
“The initial and preferred method of methacrylation for collagen was achieved using methacrylic anhydride [15], although other approaches, involving reactions using carbodiimides [16] and N-hydroxysuccinimide derivatives, are possible [17].”
MethodProcollagen segment-long-spacing crystallites: their role in collagen fibrillogenesis.
Bruns, R., HULMES, D. J. S., Therrien, S. F., & Gross, J. (1979) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.76.1.313 · Cited by 98 · cited 1×
“In some cases, the visible material was comparable to the length of a single collagen molecule, but probably comprised in-phase aggregates of collagen molecules, analogous to the segment-long-spacing (SLS) assemblies that can be observed under specific conditions [59].”
BackgroundMultiphoton crosslinking for biocompatible 3D printing of type I collagen
Bell, A., Kofron, M. J., & Nistor, V. (2015) · Biofabrication · doi:10.1088/1758-5090/7/3/035007 · Cited by 72 · cited 1×
“While many stabilisation methods are more suited to the treatment of dry collagen sponges or membranes [5], few are readily applicable to in situ crosslinking, as is required for 3D printing structures, in which rapid gelation is required [13].”
Collagen-based layer-by-layer coating on electrospun polymer scaffolds
Truong, Y. B., Glattauer, V., Briggs, K. L., Zappe, S., & Ramshaw, J. A. M. (2012) · Biomaterials · doi:10.1016/j.biomaterials.2012.09.012 · Cited by 72 · cited 1×
“Louis, MO, USA) for 4-days [12] and was recovered by neutralising, followed by dialysis and freeze-drying, as previously described [19].”
MethodSelf-citationWalton, R. S., Brand, D. D., & Czernuszka, J. T. (2009) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-009-3910-2 · Cited by 56 · cited 1×
“The atelo-collagen samples were found to have marginally higher thermal stability compared to those of the telo-collagen, a phenomenon that has been observed previously [24].”
ResultSelective labeling of α- or ϵ-amino groups in peptides by the Bolton-Hunter reagent
Gaudriault, G., & Vincent, J. (1992) · Peptides · doi:10.1016/0196-9781(92)90027-z · Cited by 54 · cited 1×
“The reactivity of Lys residues depends on their pKa values, with those with lower pKa values reacting more readily [60].”
BackgroundOkesola, B. O., Lau, H. K., Derkus, B., Boccorh, D. K., Wu, Y., Wark, A. W., Kiick, K. L., & Mata, A. (2020) · Biomaterials Science · doi:10.1039/c9bm01796h · Cited by 53 · cited 1×
“Small, round structures were also observed, which were interpreted as being due to the LAP catalyst as they were only present in the samples that had LAP added (Figure 6F,G,I) and have been observed previously in resilin samples in which LAP was present [31].”
Shaping collagen for engineering hard tissues: Towards a printomics approach
Maher, M., Castilho, M. D., Yue, Z., Glattauer, V., Hughes, T. C., Ramshaw, J. A. M., & Wallace, G. G. (2021) · Acta Biomaterialia · doi:10.1016/j.actbio.2021.06.035 · Cited by 53
Self-citationRedden, R. A., & Doolin, E. J. (2003) · Skin Research and Technology · doi:10.1034/j.1600-0846.2003.00023.x · Cited by 51
The Renaturation Behaviour of Modified Collagen Molecules
Rauterberg, J., & Kühn, K. (1968) · Hoppe-Seyler´s Zeitschrift für physiologische Chemie · doi:10.1515/bchm2.1968.349.1.611 · Cited by 40 · cited 3×
“Another factor that further limits fibril formation is whether the type I collagen is modified via, for example, succinylation, methylation or deamidation [12].”
BackgroundMethodChronic Wound Dressings Based on Collagen-Mimetic Proteins
Cereceres, S., Touchet, T. J., Browning, M. B., Smith, C., Rivera, J., Höök, M., Whitfield-Cargile, C., Russell, B. H., & Cosgriff‐Hernandez, E. (2015) · Advances in Wound Care · doi:10.1089/wound.2014.0614 · Cited by 39 · cited 1×
“However, if the collagen is chemically modified, such as through the addition of methacryl functionality, the extent of some interactions, especially those dependent on fibrillar structures, could be reduced or lost [42].”
BackgroundCollagen Fibril Formation in a Wound Healing Model
White, J., Werkmeister, J. A., Darby, I. A., Bisucci, T., Birk, D. E., & Ramshaw, J. A. M. (2002) · Journal of Structural Biology · doi:10.1006/jsbi.2002.4460 · Cited by 33 · cited 3×
“These data showed that the fibrils in the hydrogels formed by thermal treatment of telo-collagen solution were large in diameter, and showed the well-ordered, asymmetrically banded, staggered overlap structure that is observed in native tissues [28,29] (Figure 6A).”
BackgroundSelf-citationA D -periodic narrow filament in collagen
Doyle, B., HULMES, D. J. S., Miller, A. J., Parry, D. A. D., Piez, K. A., & Woodhead-Galloway, J. (1974) · Proceedings of the Royal Society B Biological Sciences · doi:10.1098/rspb.1974.0035 · Cited by 31 · cited 4×
“These data showed that the fibrils in the hydrogels formed by thermal treatment of telo-collagen solution were large in diameter, and showed the well-ordered, asymmetrically banded, staggered overlap structure that is observed in native tissues [28,29] (Figure 6A).”
BackgroundInfluentialCharacterization of type I collagen from the skin of blue grenadier (Macruronus novaezelandiae)
Ramshaw, J. A. M., Werkmeister, J. A., & Bremner, H. (1988) · Archives of Biochemistry and Biophysics · doi:10.1016/0003-9861(88)90056-2 · Cited by 29 · cited 1×
“Other collagens that could be acid-extracted in good yield with intact telopeptides include marine collagens [50] and chicken collagen [51].”
BackgroundSelf-citationBateman, J. F., Pillow, J. J., Mascara, T., Medvedec, S., Ramshaw, J. A. M., & Cole, W. G. (1987) · Biochemical Journal · doi:10.1042/bj2450677 · Cited by 23 · cited 1×
“When crosslinked methacrylated gelatin is incubated with cells, which typically have a range of cell surface proteases [64], as well as potentially secreting proteases, the extent of crosslinking limits the solubilisation of the gel, either directly, or by limiting the rate of cellular migration until sufficient remod…”
BackgroundSelf-citationBiophysical and Chemical Properties of Collagen Biophysical Applications
Ramshaw, J. A. M., & Glattauer, V. (2019) · doi:10.1088/978-0-7503-2096-2 · Cited by 12
Self-citationCell-Populated Collagen Lattice Models
Eckes, B., Wang, F., Rittié, L., Scherr, G., & Zigrino, P. (2017) · Methods in molecular biology · doi:10.1007/978-1-4939-7113-8_15 · Cited by 8 · cited 1×
“The TEM showed that the structure was less well organised (Figure 6C) but still had a fibrous network that was able to form a hydrogel that could be reorganised and consolidated [56].”
Background
Research works printed but not linked: 3
- Hoque, 2015, Gelatin based scaffolds for tissue engineering-a review, Polym. Res. J., 9, 15
- Doyle, 1974, AD-periodic narrow filament in collagen, Proc. R. Soc. Lond. Ser. B Biol. Sci., 186, 67
- de Wolf, F. (2003). Molecular structure of gelatin gels. Industrial Proteins in Perspective, Elsevier.
Cited by
Radzki, D., Negri, A., Kusiak, A., & Obuchowski, M. (2024) · International Journal of Molecular Sciences · doi:10.3390/ijms25052763 · Cited by 87
“The most abundant proteins of the ECM are collagens [17,18].”
BackgroundSalim, N. V., Madhan, B., Glattauer, V., & Ramshaw, J. A. M. (2024) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2024.134374 · Cited by 68
Self-citationAli, S. M., Patrawalla, N. Y., Kajave, N. S., Brown, A. B., & Kishore, V. (2022) · Biomacromolecules · doi:10.1021/acs.biomac.2c00985 · Cited by 26
Collagen Alignment via Electro-Compaction for Biofabrication Applications: A Review
Carr, B. P., Chen, Z. X., Chung, J. H.-Y., & Wallace, G. G. (2022) · Polymers · doi:10.3390/polym14204270 · Cited by 24
Self-citationChen, P.-H., Chen, I.-H., Kao, W.-H., Wu, S.-Y., & Tsai, W. (2024) · Biomaterials Science · doi:10.1039/d4bm00826j · Cited by 10
Metadata
- Authors
- Maher, M. K., White, J. F., Glattauer, V., Yue, Z., Hughes, T. C., Ramshaw, J. A. M., & Wallace, G. G.
- Affiliations
- University of Wollongong (AU)
- CSIRO Manufacturing, Clayton, Melbourne, VIC 3168, Australia
- Commonwealth Scientific and Industrial Research Organisation (AU)
- The University of Melbourne (AU)
- Corresponding author
- Wallace, Gordon G.
- Venue
- Polymers
- Publisher
- MDPI AG
- Published
- 2022-04-27
- Volume
- 14
- Issue
- 9
- Pages
- 1775
- ISSN
- 2073-4360 (ISSN-L)
- PMC
- PMC9103955
- OpenAlex
- W4226318425
- Cited by
- 17
- References
- 60
- Citations by year
- 2026: 6 · 2025: 3 · 2024: 3 · 2023: 3 · 2022: 2
- FWCI
- 0.69
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Polymers (publishedVersion, cc-by)
- SSRN Electronic Journal (acceptedVersion)
- PubMed Central (publishedVersion, cc-by)
- PubMed (publishedVersion)
- Research Online (University of Wollongong) (submittedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Figshare (submittedVersion)
- Minerva Access (University of Melbourne) (submittedVersion, cc-by)
- Funders
- Global Challenges Joint Ph.D. Program between the University of Wollongong and CSIRO (FL110100196)
- Australian National Fabrication Facility (ANFF) (FL110100196)
- Materials Node (FL110100196)
- the Australian Research Council (ARC) (FL110100196)
- the Australian Centre for Electromaterials Science (ACES) (FL110100196)
- Topics
- Physical Sciences › Materials Science › Biomaterials › Collagen: Extraction and Characterization
- Physical Sciences › Materials Science › Biomaterials › Hydrogels: synthesis, properties, applications
- Physical Sciences › Materials Science › Biomaterials › Silk-based biomaterials and applications
- Keywords
- type I collagen, telopeptides, hydrogel network structure, fibril formation, self-assembly, crosslinking, gelatin methacryloyl, 3D printing, extracellular matrix, hydrogel modulus
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.