Effect of Degradation During Multiple Primary Mechanical Recycling Processes on the Physical Properties and Biodegradation of Commercial PLA-Based Water Bottles
Open accessThe DOI matches its Crossref record; 42 of the 42 references it cites were found in a registry or an index; 10 of the 18 sources its claims cite were checked for support.
Abstract
For sustainable development aligned with circular economy principles, the recycling of biopolymers such as polylactic acid (PLA) is of growing interest. In this study, the effect of primary recycling through repeated mechanical reprocessing was investigated. PLA water bottle preforms were subjected to six consecutive extrusion cycles, and changes in its molecular structure and physical properties were evaluated. Structural analysis revealed a progressive degradation, evidenced by a great reduction in the molar mass and increase in the melt flow index, attributed both to the chain scission derived from the thermal degradation and shear stresses of the extrusion process, and hydrolysis at the ester linkage of the polymer. Recycled samples exhibited a darkening of the color and a continuous decrease in thermal stability. After six reprocessing cycles, PLA crystallinity increased from 6.9 to 39.5%, the cold crystallization process disappeared, and molecular weight reduced by up to 40%. Barrier properties were highly affected after reprocessing and by the increase in relative humidity. Biodegradation tests revealed that crystallinity affected considerably the biodegradation rate of PLA. Although the molecular weight was considerably reduced during reprocessing, the biodegradation was slowed down. These findings provide insights into the limitations and potential of mechanically recycled PLA for future material applications.
Overview
CoChat Summary
TL;DR
This study examined six consecutive primary mechanical reprocessing cycles of commercial PLA-based water bottle preforms and tracked how structure, thermal behavior, barrier properties, and biodegradation changed. Reprocessing caused molar-mass loss, higher melt flow, discoloration, reduced thermal stability, increased crystallinity, and altered biodegradation behavior, suggesting limits for reuse in bottles but potential for other packaging uses.
Key findings
- Molar mass decreased progressively with reprocessing; the greatest drop was after the first cycle, about 16%, and Mw reduced by up to 40% after six reprocessing cycles.
- Melt flow index increased with reprocessing, while dispersity stayed about 2.1 across cycles.
- Color changed markedly with reprocessing: the paper reports ΔE > 5, meaning the color difference was clearly perceptible.
- Crystallinity increased from 6.9% to 39.5% after six reprocessing cycles; the abstract also states the cold crystallization process disappeared at that point.
- Barrier performance worsened, and the authors report that rPLA3–rPLA6 could not be tested as cast films because the melt flow became too high; permeability was also influenced by relative humidity.
- In biodegradation tests under aerobic composting, the original PLA preform and cellulose control each reached approximately 90% biodegradation around day 110; rPLA6 biodegraded slightly faster than rPLA2, despite its higher crystallinity.
Methods
- Commercial green PLA water bottle preforms were subjected to six consecutive extrusion reprocessing cycles (PLA0 to rPLA6), with grinding, drying, melt extrusion, and film preparation for different tests.
- Characterization included FTIR-ATR, GPC for molar mass distribution, MFI, colorimetry, TGA/DSC, and oxygen/water-vapor barrier testing.
- Biodegradation was tested under controlled aerobic composting following UNE-EN ISO 14855-2:2018, using mature compost inoculum, with triplicate bioreactors and CO2-based biodegradation measurement; statistics used ANOVA with α = 0.05.
Limitations
- Stated in the paper: the authors say future work including migration tests and mechanical property evaluations should be conducted to better understand suitability for food-packaging applications.
- Evident from the text: barrier measurements were only feasible for rPLA1 and rPLA2 as cast films; rPLA3–rPLA6 could not be evaluated for permeability because of excessive melt flow.
- Evident from the text: the biodegradation discussion appears incomplete in the provided text, so only partial biodegradation results are available here.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Figures





Verification
Claims the paper makes
9 Valid · 0 Not valid · 5 Not checked · 33 Own results and interpretations
Every source the paper cites for this claim was checked and supports it.
In the paper
“Mechanical recycling is considered the end-of-life option with the lowest environmental impact because of the ability to recover valuable resources [5].”
§ Effect of Degradation During Multiple Primary Mechanical Recycling Processes on the Physical Properties and Biodegradation of Commercial PLA-Based Water Bottles > 1. Introduction
What the sources say
- Supportedcites [5] Dedieu, 2022, The Thermo-Mechanical Recyclability Potential of Biodegradable Biopolyesters: Perspectives and Limits for Food Packaging Application, Polym. Test. source
Section 2 (Recycling processes and life cycle assessment; page not provided) describes mechanical recycling as the favorable end-of-life option in the studies it reviews and reports lower environmental impacts than the alternatives examined. It explains the benefit in terms of regenerating and reusing the polymer, avoiding the impacts of producing replacement material. (LLM, conf=0.90)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Supported
Every source the paper cites for this claim was checked and supports it.
In the paper
“Structural analysis revealed a progressive degradation, evidenced by a great reduction in the molar mass and increase in the melt flow index, attributed both to the chain scission derived from the thermal degradation and shear stresses of the extrusion process, and hydrolysis at the ester linkage of the polymer.”
- Also stated in: § 3.1. Structural and Optical Properties After Multiple Mechanical Recycling · plain
“The reduction in the molar mass was attributed to the chain scission derived from the thermal degradation, shear stresses of the extrusion process, and hydrolysis at the ester linkage of the polymer [27].”
§ Effect of Degradation During Multiple Primary Mechanical Recycling Processes on the Physical Properties and Biodegradation of Commercial PLA-Based Water Bottles > Abstract
What the sources say
- Supportedcites [27] 2020, On the Recycling of a Biodegradable Polymer: Multiple Extrusion of Poly (Lactic Acid), Mater. Res. source
The Results section reports that molecular weight falls with repeated extrusion because of heat and shear stresses. It also describes moisture-associated hydrolysis that splits PLA chains into smaller molecules, supporting the claimed degradation mechanism. (LLM, conf=0.90)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Also stated in: § 3.1. Structural and Optical Properties After Multiple Mechanical Recycling · plain
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“It was evidenced that reprocessing increased the chain mobility and fluency as had been previously reported for other polymers, such as polyamides [32], polyethylene, and polypropylene [33,34].”
§ Effect of Degradation During Multiple Primary Mechanical Recycling Processes on the Physical Properties and Biodegradation of Commercial PLA-Based Water Bottles > 3. Results > 3.1. Structural and Optical Properties After Multiple Mechanical Recycling
What the sources say
- Not checked — no full text of the sourcecites [32] Morales, 2025, The Effect of Reprocessing and Moisture on Polyamide Recycling: A Focus on Neat, Composites, and Blends, Macromol. Mater. Eng. source
- Partly supportedcites [33] Verberckmoes, 2024, Morphological Analysis of Mechanically Recycled Blends of High Density Polyethylene and Polypropylene with Strong Difference in Melt Flow Index, Polymer sourceExperimental — accuracy not yet measured
The Crystallinity and melting behavior section (p. 12) reports that reprocessing produces shorter polypropylene chains with higher mobility. It does not establish that reprocessing increases flowability in both polyethylene and polypropylene: the Abstract (p. 1) describes polyethylene as more flowable initially and says its chains can crosslink during reprocessing. The source does not study PLA preforms. (LLM, conf=0.86)
- Not checked — no full text of the sourcecites [34] Rojas, 2024, Multiple Mechanical Recycling of a Post-Industrial Flexible Polypropylene and Its Nanocomposite with Clay: Impact on Properties for Food Packaging Applications, Food Packag. Shelf Life source
boostedstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“Life cycle assessment (LCA) studies consistently show that key impact categories such as climate change, human toxicity, and fossil resource depletion are all minimized with mechanical recycling, primarily due to lower energy requirements and the avoidance of virgin material production [7,8].”
§ Effect of Degradation During Multiple Primary Mechanical Recycling Processes on the Physical Properties and Biodegradation of Commercial PLA-Based Water Bottles > 1. Introduction
What the sources say
- Not checked — no full text of the sourcecites [7] Souza, 2016, Life Cycle Assessment of Poly(Lactic Acid) (PLA): Comparison Between Chemical Recycling, Mechanical Recycling and Composting, J. Polym. Environ. source
- Partly supportedcites [8] Ladakis, 2023, Attributional and Consequential Life Cycle Perspectives of Second-Generation Polylactic Acid: The Benefits of Integrating a Recycling Strategy, J. Clean. Prod. sourceExperimental — accuracy not yet measured
Split into 2 atoms — 0 confirmed, 2 partially supported, 0 disputed, 0 misattributed, 0 unverifiable. Expand the claim to see per-atom verdicts.
boostedstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“Biodegradability tests revealed biodegradation kinetics and rates were highly dependent on both the molar mass and the crystallinity degree of a polymer.”
§ Effect of Degradation During Multiple Primary Mechanical Recycling Processes on the Physical Properties and Biodegradation of Commercial PLA-Based Water Bottles > 4. Conclusions
boostedstates an association- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
19 more claims
Create a free account to see all 47 claims and every source verdict.
- The quote only partly states this claim. 2
- Probably not a substantial claim. 5
- It may state two separate claims as one. 19
Citations
Cites
Cosate de Andrade, M. F., Souza, P. M. S., Cavalett, O., & Morales, A. R. (2016) · Journal of Polymers and the Environment · doi:10.1007/s10924-016-0787-2 · Cited by 275
Biodegradation in Soil of PLA/PBAT Blends Compatibilized with Chain Extender
Palsikowski, P. A., Kuchnier, C. N., Pinheiro, I. F., & Morales, A. R. (2018) · Journal of Polymers and the Environment · doi:10.1007/s10924-017-0951-3 · Cited by 247
Characterisation of multi-extruded poly(lactic acid)
Żenkiewicz, M., Richert, J., Rytlewski, P., Moraczewski, K., Stepczyńska, M., & Karasiewicz, T. (2009) · Polymer Testing · doi:10.1016/j.polymertesting.2009.01.012 · Cited by 241
Recycling of bioplastic waste: A review
Fredi, G., & Dorigato, A. (2021) · Advanced Industrial and Engineering Polymer Research · doi:10.1016/j.aiepr.2021.06.006 · Cited by 227
Tailoring the Barrier Properties of PLA: A State-of-the-Art Review for Food Packaging Applications
Marano, S., Laudadio, E., Minnelli, C., & Stipa, P. (2022) · Polymers · doi:10.3390/polym14081626 · Cited by 213
Life cycle assessment of recycling options for polylactic acid
Maga, D., Hiebel, M., & Thonemann, N. (2019) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2019.05.018 · Cited by 211
Progress in upcycling polylactic acid waste as an alternative carbon source: A review
Sun, C., Wei, S., Tan, H., Huang, Y., & Zhang, Y. (2022) · Chemical Engineering Journal · doi:10.1016/j.cej.2022.136881 · Cited by 206
Review on the Degradation of Poly(lactic acid) during Melt Processing
Velghe, I., Buffel, B., Vandeginste, V., Thielemans, W., & Desplentere, F. (2023) · Polymers · doi:10.3390/polym15092047 · Cited by 146
Agüero, A., Morcillo, M. D. C., Quiles-Carrillo, L., Balart, R., Boronat, T., Lascano, D., Torres-Giner, S., & Fenollar, O. (2019) · Polymers · doi:10.3390/polym11121908 · Cited by 141
Huang, S., Dong, Q., Che, S., Li, R., & Tang, K. H. D. (2025) · Science of The Total Environment · doi:10.1016/j.scitotenv.2025.178911 · Cited by 132
Chemical Recycling of Post-Consumer PLA Waste for Sustainable Production of Ethyl Lactate
Majgaonkar, P., Hanich-Spahn, R., Malz, F., & Brüll, R. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.129952 · Cited by 123
Beltrán, F. R., Lorenzo, V., Acosta, J., de la Orden, M. U., & Martínez Urreaga, J. (2018) · Journal of Environmental Management · doi:10.1016/j.jenvman.2017.05.020 · Cited by 114
Reprocessing of PLA/Graphene Nanoplatelets Nanocomposites
Botta, L., Scaffaro, R., Sutera, F., & Mistretta, M. (2017) · Polymers · doi:10.3390/polym10010018 · Cited by 107
Beltrán, F. R., Infante, C., de la Orden, M. U., & Martínez Urreaga, J. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.01.206 · Cited by 104
Deterioration in the Physico-Mechanical and Thermal Properties of Biopolymers Due to Reprocessing
Shojaeiarani, J., Bajwa, D. S., Rehovsky, C., Bajwa, S. G., & Vahidi, G. (2019) · Polymers · doi:10.3390/polym11010058 · Cited by 85
Dedieu, I., Peyron, S., Gontard, N., & Aouf, C. (2022) · Polymer Testing · doi:10.1016/j.polymertesting.2022.107620 · Cited by 84
da Silva Pens, C. J., Klug, T. V., Stoll, L., Izidoro, F., Flores, S. H., & de Oliveira Rios, A. (2024) · Food Packaging and Shelf Life · doi:10.1016/j.fpsl.2023.101230 · Cited by 83
Romani, A., Perusin, L., Ciurnelli, M., & Levi, M. (2023) · Materials Today Sustainability · doi:10.1016/j.mtsust.2023.100636 · Cited by 72
Finnerty, J., Rowe, S., Howard, T., Connolly, S., Doran, C., Devine, D. M., Gately, N. M., Chyzna, V., Portela, A., Bezerra, G. S. N., et al. (2023) · Journal of Composites Science · doi:10.3390/jcs7040141 · Cited by 66 · cited 1×
“Finnerty et al. (2023) showed the discoloration and decrease in tensile properties of natural-fiber-reinforced PLA, in addition to the increase in glass transition temperature and crystallinity of PLA after six recycling processes [14].”
Siddiqui, M. N., Redhwi, H. H., Tsagkalias, I. S., Vouvoudi, E. C., & Achilias, D. S. (2021) · Polymers · doi:10.3390/polym13213652 · Cited by 61
Influence of Addition of Organic Fillers on the Properties of Mechanically Recycled PLA
Beltrán, F. R., Gaspar, G., Dadras Chomachayi, M., Jalali-Arani, A., Lozano-Pérez, A. A., Cenis, J. L., de la Orden, M. U., Pérez, E., & Martínez Urreaga, J. M. (2021) · Environmental Science and Pollution Research · doi:10.1007/s11356-020-08025-7 · Cited by 54
Degradation of poly(L‐lactide) by a mesophilic bacterium
Kim, M. N., & Park, S. T. (2010) · Journal of Applied Polymer Science · doi:10.1002/app.31950 · Cited by 51
Mechanical recycling of PLA : Effect of weathering, extrusion cycles, and chain extender
Ramos‐Hernández, T., Robledo‐Ortíz, J. R., González‐López, M. E., del Campo, A. S. M., González‐Núñez, R., Rodrigue, D., & Pérez‐Fonseca, A. A. (2023) · Journal of Applied Polymer Science · doi:10.1002/app.53759 · Cited by 47
Recyclability of Poly(Hydroxybutyrate-Co-Hydroxyhexanoate) (PHBH) for Food Packaging Applications
Plouzeau, M., Belyamani, I., Fatyeyeva, K., Marais, S., Kobzar, Y., & Cauret, L. (2023) · Food Packaging and Shelf Life · doi:10.1016/j.fpsl.2023.101170 · Cited by 41 · cited 2×
“Although reprocessed materials maintained the original tones (green and yellow), they were darker in comparison to those of rPLA, as was reported by [35].”
Wang, W., Ye, G., Fan, D., Yang, L., Shi, P., Wang, X., & Bateer, B. (2021) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2021.109762 · Cited by 40
Lee, D., Lee, Y., Kim, I., Hwang, K., & Kim, N. (2022) · Polymers · doi:10.3390/polym14245385 · Cited by 40
On the Recycling of a Biodegradable Polymer: Multiple Extrusion of Poly (Lactic Acid)
Gonçalves, L. M. G., Rigolin, T. R., Frenhe, B. M., & Bettini, S. H. P. (2020) · Materials Research · doi:10.1590/1980-5373-mr-2020-0274 · Cited by 37
Recent Developments in Plastic Recycling
(2021) · Composites science and technology · doi:10.1007/978-981-16-3627-1 · Cited by 36
Biobased plastics for the transition to a circular economy
Terzopoulou, Z. N., & Bikiaris, D. Ν. (2024) · Materials Letters · doi:10.1016/j.matlet.2024.136174 · Cited by 34
Beltrán, F. R., Arrieta, M. P., Gaspar, G., de la Orden, M. U., & Urreaga, J. M. (2020) · Polymers · doi:10.3390/polym12081690 · Cited by 33
Salah, L. S., Ouslimani, N., Danlée, Y., Beltrán, F. R., Huynen, I., & de la Orden, M. U. (2022) · Composites Part C Open Access · doi:10.1016/j.jcomc.2022.100339 · Cited by 27
Rebolledo-Leiva, R., Ladakis, D., Ioannidou, S.-M., Koutinas, A., Moreira, M. T., & González-García, S. (2023) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2023.138354 · Cited by 27
Oh, J., Park, S. B., Cha, C., Hwang, D. K., Park, S., Park, J., Oh, D. X., Jeon, H., & Koo, J. M. (2024) · Chemosphere · doi:10.1016/j.chemosphere.2024.141729 · Cited by 27
Morales, J., & Rodrigue, D. (2025) · Macromolecular Materials and Engineering · doi:10.1002/mame.202400304 · Cited by 25
Navneet, Martínez, M. M., & Joye, I. J. (2024) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2024.110416 · Cited by 24
D'Amario, J., Limsukon, W., Bher, A., & Auras, R. (2025) · RSC Applied Polymers · doi:10.1039/d5lp00041f · Cited by 22
Verberckmoes, A., Fernandez, E., Martins, C., Reyes, P., Cardon, L., D'hooge, D. R., & Edeleva, M. (2024) · Polymer · doi:10.1016/j.polymer.2024.126999 · Cited by 20
Velásquez, E., de Dicastillo, C. L., Rojas, A., Garrido, L., Pérez, C. J., Lira, M., Guarda, A., & Galotto, M. J. (2024) · Food Packaging and Shelf Life · doi:10.1016/j.fpsl.2024.101272 · Cited by 16
Self-citationActive Polylactic Acid (PLA) Films Incorporating Almond Peel Extracts for Food Preservation
Martin-Perez, L., Contreras, C., Chiralt, A., & Gonzalez-Martinez, C. (2025) · Molecules · doi:10.3390/molecules30091988 · Cited by 11
Fan, Z., Fu, L., Lan, L., Dan, Y., Jiang, L., & Huang, Y. (2024) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2024.138819 · Cited by 9
Muñoz‐Shugulí, C., Rodríguez, F. J., Guarda, A., et al. (2024) · Molecules · doi:10.3390/molecules29245859 · Cited by 6
Self-citationMuñoz‐Shugulí, C., Rodríguez, F. J., Guarda, A., et al. (2024) · Preprints.org · doi:10.20944/preprints202411.0981.v1 · Cited by 2
Self-citation
Cited by
Morán, D., Velásquez, E., Calatayud, M., de la Fuente, B., Hernández‐Muñoz, P., & de Dicastillo, C. L. (2025) · ACS Omega · doi:10.1021/acsomega.5c09603 · Cited by 4
Self-citationFeroce, A., Exojo-Trujillo, S., Vilariño, J. M. L., Licciardello, F., Gavara, R., & de Dicastillo, C. L. (2026) · Food Packaging and Shelf Life · doi:10.1016/j.fpsl.2026.101700 · Cited by 2
Self-citationRecycling of Poly(lactic acid): From Molecular Degradation to Circular End-of-Life Strategies
Saygin, H., & Baysal, A. (2026) · Polymers · doi:10.3390/polym18141731 · Cited by 2
“Mechanical recycling requires clean, dry, and compositionally homogeneous PLA, together with washing and drying systems that minimize hydrolysis during melt reprocessing [32–34 , 36– Formulation complexity further complicates routing.”
InfluentialFrohn-Sörensen, P., Sermelwall, M., Mouratidis, M., Engel, B., Reinicke, T., & Khosravani, M. R. (2026) · Resources Conservation & Recycling Advances · doi:10.1016/j.rcradv.2026.200330 · Cited by 3
Physical recycling of bio-based polyester nanocomposites
Molnár, B., Taha, Z. T., Khan, K. U., et al. (2026) · Journal of Polymer Research · doi:10.1007/s10965-026-05001-6 · Cited by 1
Metadata
- Authors
- Muñoz-Shugulí, C., Morán, D., Velásquez, E., López-Vilariño, J. M., & López-de-Dicastillo, C.
- Affiliations
- Faculty of Sciences, Escuela Superior Politécnica de Chimborazo (ESPOCH), Riobamba 060106, Ecuador
- Consejo Superior de Investigaciones Científicas (ES)
- Universidad de Santiago de Chile (CL)
- Hijos de Rivera SAU, José María Rivera Corral 6, 15008 A Coruña, Spain
- Packaging Group, Institute of Agrochemistry and Food Technology (IATA-CSIC), Av. Agustín Escardino 7, Paterna, 46980 Valencia, Spain
- Venue
- Polymers
- Publisher
- MDPI AG
- Published
- 2025-09-20
- Volume
- 17
- Issue
- 18
- Pages
- 2542
- ISSN
- 2073-4360 (ISSN-L)
- PMC
- PMC12473880
- OpenAlex
- W4414390778
- Semantic Scholar
- 32e74dd2473a7fbf2c738f427ba4fca59d9637c1
- Cited by
- 17
- References
- 41
- Citations by year
- 2026: 16 · 2025: 1
- FWCI
- 3.08
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Polymers (publishedVersion, cc-by)
- Europe PMC (PubMed Central) (publishedVersion, cc-by)
- PubMed (publishedVersion)
- PubMed Central (publishedVersion, cc-by)
- DIGITAL.CSIC (Spanish National Research Council (CSIC)) (acceptedVersion, other-oa)
- Funders
- Hijos de Rivera Co., A Coruña, Spain
- Topics
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer crystallization and properties
- Physical Sciences › Environmental Science › Waste Management and Disposal › Waste Management and Recycling
- Keywords
- polylactic acid, mechanical recycling, biopolymer degradation, thermal degradation, hydrolysis, molecular weight reduction, crystallinity, cold crystallization, barrier properties, relative humidity, biodegradation, circular economy
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
The claim verdicts this report counts are experimental: their accuracy is not yet measured.
A language model drew the claims from the paper on 2026-10-09, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-10-09 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Cited sources are checked with a language model’s help (gpt-6-sol).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.