The DOI matches its Crossref record; 24 of the 24 references it cites were found in a registry or an index.
Biochar as Sustainable Alternative and Green Adsorbent for the Remediation of Noxious Pollutants: A Comprehensive Review
Open accessAbstract
The current water crisis necessitates the development of new materials for wastewater treatment. A variety of nanomaterials are continuously being investigated for their potential as adsorbents for environmental remediation. Researchers intend to develop a low-cost, simple, and sustainable material that can cater to removal of pollutants. Biochar derived from biowaste is a potential candidate for the existing problem of water pollution. The review focuses on the various aspects of biochar, such as its sources, preparation methods, mechanism, applications for wastewater treatment, and its regeneration. Compared with other adsorbents, biochar is considered as an environmentally friendly, sustainable, and cost-effective substitute for waste management, climate protection, soil improvement, wastewater treatment, etc. The special properties of biochar such as porosity, surface area, surface charge, and functional groups can be easily modified by various chemical methods, resulting in improved adsorption properties. Therefore, in view of the increasing environmental pollution and the problems encountered by researchers in treating pollutants, biochar is of great importance. This review also highlights the challenges and prospective areas that can be explored and studied in more detail in the future.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Biochar physicochemical properties: pyrolysis temperature and feedstock kind effects
Tomczyk, A., Sokołowska, Z., & Boguta, P. (2020) · Reviews in Environmental Science and Bio/Technology · doi:10.1007/s11157-020-09523-3 · Cited by 2,948 · cited 4×
“The CEC value also depends on the type of raw material used for preparation of biochar.”
BackgroundInfluentialApplication of biochar for the removal of pollutants from aqueous solutions
Tan, X., Liu, Y., Zeng, G., Wang, X., Hu, X., Gu, Y., & Yang, Z. (2015) · Chemosphere · doi:10.1016/j.chemosphere.2014.12.058 · Cited by 2,081
Libra, J. A., Ro, K. S., Kammann, C., Funke, A., Berge, N. D., Neubauer, Y., Titirici, M.-M., Fühner, C., Bens, O., Kern, J., et al. (2011) · Biofuels · doi:10.4155/bfs.10.81 · Cited by 1,756
Weber, K., & Quicker, P. (2018) · Fuel · doi:10.1016/j.fuel.2017.12.054 · Cited by 1,522
A review of biochar as a low-cost adsorbent for aqueous heavy metal removal
Inyang, M. I., Gao, B., Yao, Y., Xue, Y., Zimmerman, A., Mosa, A., Pullammanappallil, P., Ok, Y. S., & Cao, X. (2016) · Critical Reviews in Environmental Science and Technology · doi:10.1080/10643389.2015.1096880 · Cited by 1,397
Ahmad, M., Lee, S. S., Dou, X., Mohan, D., Sung, J.-K., Yang, J. E., & Ok, Y. S. (2012) · Bioresource Technology · doi:10.1016/j.biortech.2012.05.042 · Cited by 1,357
Biochar reduces the bioavailability and phytotoxicity of heavy metals
Park, J. H., Choppala, G. K., Bolan, N. S., Chung, J. W., & Chuasavathi, T. (2011) · Plant and Soil · doi:10.1007/s11104-011-0948-y · Cited by 1,157
Yaashikaa, P. R., Kumar, P. S., Varjani, S., & Saravanan, A. (2020) · Biotechnology Reports · doi:10.1016/j.btre.2020.e00570 · Cited by 1,132
Mohan, D., Pittman, C. U., Bricka, M., Smith, F., Yancey, B., Mohammad, J., Steele, P. H., Alexandre-Franco, M. F., Gómez-Serrano, V., & Gong, H. (2007) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2007.01.020 · Cited by 973
Ambaye, T. G., Vaccari, M., van Hullebusch, E. D., Amrane, A., & Rtimi, S. (2021) · International Journal of Environmental Science and Technology · doi:10.1007/s13762-020-03060-w · Cited by 886 · cited 3×
“The hydrochar formed has more oxygen-containing functional groups, which makes it more favourable for adsorption of heavy metals from aqueous media [1].”
BackgroundInfluentialAngın, D. (2013) · Bioresource Technology · doi:10.1016/j.biortech.2012.10.150 · Cited by 733
Removal of lead from water using biochars prepared from hydrothermal liquefaction of biomass
Liu, Z., & Zhang, F.-S. (2009) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2009.01.085 · Cited by 710 · cited 2×
“showed that biochar produced at low temperatures (300 ◦C) has a high affinity for complexation compared with biochar produced at high temperatures (700–900 ◦C) [64].”
BackgroundApplication of agro-waste for sustainable construction materials: A review
Madurwar, M. V., Ralegaonkar, R. V., & Mandavgane, S. A. (2013) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2012.09.011 · Cited by 584
Catechol and Humic Acid Sorption onto a Range of Laboratory-Produced Black Carbons (Biochars)
Kasozi, G. N., Zimmerman, A. R., Nkedi-Kizza, P., & Gao, B. (2010) · Environmental Science & Technology · doi:10.1021/es1014423 · Cited by 509
Harvey, O. R., Herbert, B. E., Rhue, R. D., & Kuo, L.-J. (2011) · Environmental Science & Technology · doi:10.1021/es104401h · Cited by 507
Carbon dioxide capture using biochar produced from sugarcane bagasse and hickory wood
Creamer, A. E., Gao, B., & Zhang, M. (2014) · Chemical Engineering Journal · doi:10.1016/j.cej.2014.03.105 · Cited by 432 · cited 1×
“demonstrated the use of sugarcane bagasse as a source of biochar for CO2 adsorption [46].”
BackgroundGhani, W. A. W. A. K., Mohd, A., da Silva, G., Bachmann, R. T., Taufiq-Yap, Y. H., Rashid, U., & Al-Muhtaseb, A. H. (2013) · Industrial Crops and Products · doi:10.1016/j.indcrop.2012.10.017 · Cited by 410 · cited 1×
“demonstrated that biochar becomes more hydrophilic at temperatures below 500 ◦C (slow pyrolysis), while biochar exhibits hydrophobic behaviour and high thermal stability at temperatures above 650 ◦C [56].”
BackgroundPuga, A. P., Abreu, C. A., Melo, L. C. A., & Beesley, L. (2015) · Journal of Environmental Management · doi:10.1016/j.jenvman.2015.05.036 · Cited by 408
Effectiveness and mechanisms of dye adsorption on a straw-based biochar
Qiu, Y., Zheng, Z., Zhou, Z., & Sheng, G. D. (2009) · Bioresource Technology · doi:10.1016/j.biortech.2009.05.054 · Cited by 342
Wiedner, K., Rumpel, C., Steiner, C., Pozzi, A., Maas, R., & Glaser, B. (2013) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2013.08.026 · Cited by 260
Jeyasubramanian, K., Thangagiri, B., Sakthivel, A., Dhaveethu Raja, J., Seenivasan, S., Vallinayagam, P., Madhavan, D., Malathi Devi, S., & Rathika, B. (2021) · Fuel · doi:10.1016/j.fuel.2021.120243 · Cited by 197 · cited 6×
“In this process, raw material was heated for the residence time of 15–60 min within the temperature range 200–300 ◦C in an inert atmosphere [19].”
BackgroundMethodInfluentialMurray, C. C., Vatankhah, H., McDonough, C. A., Nickerson, A., Hedtke, T. T., Cath, T. Y., Higgins, C. P., & Bellona, C. L. (2019) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2018.11.050 · Cited by 172 · cited 1×
“The hydrophobic nature of biochar can be explained by a decrease in oxygen, hydrogen, nitrogen, and sulphur content and an increase in carbon content due to carbonization [94].”
BackgroundMechanism of adsorption of cadmium and lead ions by iron-activated biochar
Cui, L., Chen, T., Yin, C., Yan, J., Ippolito, J. A., & Hussain, Q. (2018) · BioResources · doi:10.15376/biores.14.1.842-857 · Cited by 44
Nworie, F., Oroke, E., Ikelle, II, & Nworu, J. (2020) · Acta Chemica Malaysia · doi:10.2478/acmy-2020-0002 · Cited by 8 · cited 1×
“Plantain peel 150 min 10 Pb 4 mg/g [144]”
Background
Cited by
Beljin, J., Đukanović, N., Anojčić, J., Simetić, T., Apostolović, T., Mutić, S., & Maletić, S. (2024) · Nanomaterials · doi:10.3390/nano15010026 · Cited by 69
Evaluating Biochar’s Role in Dye Adsorption and Wheat Performance Under Saline Conditions
Kataya, G., El Badan, D., Cornu, D., Mousawi, A. A., Bechelany, M., & Hijazi, A. (2025) · Materials · doi:10.3390/ma18204678 · Cited by 2
Metadata
- Authors
- Jha, S., Gaur, R., Shahabuddin, S., & Tyagi, I.
- Venue
- Toxics
- Publisher
- MDPI AG
- Published
- 2023-01-25
- Volume
- 11
- Issue
- 2
- Pages
- 117
- ISSN
- 2305-6304 (ISSN-L)
- OpenAlex
- W4317934337
- Cited by
- 190
- References
- 24
- FWCI
- 14.44
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.