The DOI matches its Crossref record; 9 of the 9 references it cites were found in a registry or an index.
Prognostics and Health Management of Electronics
Abstract
There has been a growing interest in monitoring the ongoing of products and systems in order to predict failures and provide warning to avoid catastrophic failure. Here, health is defined as the extent of degradation or deviation from an expected normal condition. While the application of health monitoring, also referred to as prognostics, is well established for assessment of mechanical systems, this is not the case for electronic systems. However, electronic systems are integral to the functionality of most systems today, and their reliability is often critical for system reliability. This paper presents the state-of-practice and the current state-of-research in the area of electronics prognostics and health management. Four current approaches include built-in-test (BIT), use of fuses and canary devices, monitoring and reasoning of failure precursors, and modeling accumulated damage based on measured life-cycle loads. Examples are provided for these different approaches, and the implementation challenges are discussed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Vibration Based Condition Monitoring: A Review
Carden, E. P., & Fanning, P. (2004) · Structural Health Monitoring · doi:10.1177/1475921704047500 · Cited by 1,543
Review Paper: Health Monitoring of Civil Infrastructure
Chang, P. C., Flatau, A., & Liu, S. C. (2003) · Structural Health Monitoring · doi:10.1177/1475921703036169 · Cited by 982
Improved disk-drive failure warnings
Hughes, G. F., Murray, J. F., Kreutz-Delgado, K., & Elkan, C. (2002) · IEEE Transactions on Reliability · doi:10.1109/tr.2002.802886 · Cited by 216
A life consumption monitoring methodology for electronic systems
Ramakrishnan, A., & PECHT, M. G. (2003) · IEEE Transactions on Components and Packaging Technologies · doi:10.1109/tcapt.2003.817654 · Cited by 172
Self-citationA survey of aircraft engine health monitoring systems
Tumer, I. Y., & Bajwa, A. R. (1999) · AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit · doi:10.2514/6.1999-2528 · Cited by 119
In-situ sensors for product reliability monitoring
Mishra, S., PECHT, M. G., & Goodman, D. L. (2002) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.462807 · Cited by 114
Self-citationGuidebook for Managing Silicon Chip Reliability
PECHT, M. G., Radojcic, R., & Rao, G. (2017) · CRC Press eBooks · doi:10.1201/9780203719619 · Cited by 69
Self-citationA review of fault management techniques used in safety-critical avionic systems
Johnson, D. (1996) · Progress in Aerospace Sciences · doi:10.1016/0376-0421(96)82785-0 · Cited by 53
Proactive Fault Monitoring in Enterprise Servers.
Whisnant, K., Gross, K. C., & Lingurovska, N. (2005) · CDES · Cited by 36
Cited by
Remaining useful life estimation – A review on the statistical data driven approaches
Si, X.-S., Wang, W., Hu, C.-H., & Zhou, D.-H. (2011) · European Journal of Operational Research · doi:10.1016/j.ejor.2010.11.018 · Cited by 2,162
He, W., Williard, N., Osterman, M., & Pecht, M. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.08.040 · Cited by 1,105
Self-citationAn overview of time-based and condition-based maintenance in industrial application
Ahmad, R., & Kamaruddin, S. (2012) · Computers & Industrial Engineering · doi:10.1016/j.cie.2012.02.002 · Cited by 968
Transitioning to Physics-of-Failure as a Reliability Driver in Power Electronics
Wang, H., Liserre, M., Blaabjerg, F., de Place Rimmen, P., Jacobsen, J. B., Kvisgaard, T., & Landkildehus, J. (2014) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2013.2290282 · Cited by 693
Remaining Useful Life Estimation Based on a Nonlinear Diffusion Degradation Process
Si, X.-S., Wang, W., Hu, C.-H., Zhou, D.-H., & Pecht, M. G. (2012) · IEEE Transactions on Reliability · doi:10.1109/tr.2011.2182221 · Cited by 662
Self-citationFailure diagnosis using deep belief learning based health state classification
Tamilselvan, P., & Wang, P. (2013) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2013.02.022 · Cited by 630
Ageing and Failure Modes of IGBT Modules in High-Temperature Power Cycling
Smet, V., Forest, F., Huselstein, J.-J., Richardeau, F., Khatir, Z., Lefebvre, S., & Berkani, M. (2011) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2011.2114313 · Cited by 620
Oh, H., Han, B., McCluskey, P., Han, C., & Youn, B. D. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2346485 · Cited by 513
Si, X.-S., Wang, W., Hu, C.-H., Chen, M.-Y., & Zhou, D.-H. (2013) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2012.08.016 · Cited by 457
Prognostics and Health Management: A Review of Vibration Based Bearing and Gear Health Indicators
Wang, D., Tsui, K.-L., & Miao, Q. (2018) · IEEE Access · doi:10.1109/access.2017.2774261 · Cited by 455
A review on prognostics and health management (PHM) methods of lithium-ion batteries
Meng, H., & Li, Y.-F. (2019) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2019.109405 · Cited by 389
Prognostics and Health Management: A Review on Data Driven Approaches
Tsui, K. L., Chen, N., Zhou, Q., Hai, Y., & Wang, W. (2015) · Mathematical Problems in Engineering · doi:10.1155/2015/793161 · Cited by 368
Extended Kalman Filtering for Remaining-Useful-Life Estimation of Bearings
Singleton, R. K., Strangas, E. G., & Aviyente, S. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2336616 · Cited by 364
Online Fault Diagnosis Method Based on Transfer Convolutional Neural Networks
Xu, G., Liu, M., Jiang, Z., Shen, W., & Huang, C. (2020) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2019.2902003 · Cited by 353
Wang, D., Miao, Q., & Pecht, M. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.03.129 · Cited by 351
Self-citationA Two-Stage Data-Driven-Based Prognostic Approach for Bearing Degradation Problem
Wang, Y., Peng, Y., Zi, Y., Jin, X., & Tsui, K.-L. (2016) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2016.2535368 · Cited by 344
Ji, B., Pickert, V., Cao, W., & Zahawi, B. (2013) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2251358 · Cited by 329
A review of diagnostic and prognostic capabilities and best practices for manufacturing
Vogl, G. W., Weiss, B. A., & Helu, M. (2019) · Journal of Intelligent Manufacturing · doi:10.1007/s10845-016-1228-8 · Cited by 326
Guha, A., & Patra, A. (2018) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2017.2776558 · Cited by 318
A Prognostics and Health Management Roadmap for Information and Electronics-Rich Systems
PECHT, M. G. (2009) · IEICE ESS Fundamentals Review · doi:10.1587/essfr.3.4_25 · Cited by 306
Self-citationDeep Coupling Autoencoder for Fault Diagnosis With Multimodal Sensory Data
Ma, M., Sun, C., & Chen, X. (2018) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2018.2793246 · Cited by 304
Prognostics of PEM fuel cell in a particle filtering framework
Jouin, M., Gouriveau, R., Hissel, D., Péra, M.-C., & Zerhouni, N. (2014) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2013.10.054 · Cited by 290
Prognostics and Health Management of Electronics
Pecht, M. (2008) · Encyclopedia of Structural Health Monitoring · doi:10.1002/9780470061626.shm118 · Cited by 287
Self-citationSi, X.-S., Wang, W., Chen, M.-Y., Hu, C.-H., & Zhou, D.-H. (2013) · European Journal of Operational Research · doi:10.1016/j.ejor.2012.10.030 · Cited by 278
Tang, S., Yu, C., Wang, X., Guo, X., & Si, X. (2014) · Energies · doi:10.3390/en7020520 · Cited by 277
A review on prognostics and health monitoring of proton exchange membrane fuel cell
Sutharssan, T., Montalvao, D., Chen, Y. K., Wang, W.-C., Pisac, C., & Elemara, H. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.11.009 · Cited by 269
IoT-Based Prognostics and Systems Health Management for Industrial Applications
Kwon, D., Hodkiewicz, M. R., Fan, J., Shibutani, T., & Pecht, M. G. (2016) · IEEE Access · doi:10.1109/access.2016.2587754 · Cited by 263
Self-citationNiu, G., Yang, B.-S., & Pecht, M. (2010) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2010.02.016 · Cited by 257
Self-citationLong, B., Xian, W., Jiang, L., & Liu, Z. (2013) · Microelectronics Reliability · doi:10.1016/j.microrel.2013.01.006 · Cited by 244
Javed, K., Gouriveau, R., & Zerhouni, N. (2017) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2017.01.050 · Cited by 217
Sensor Systems for Prognostics and Health Management
Cheng, S., Azarian, M. H., & Pecht, M. G. (2010) · Sensors · doi:10.3390/s100605774 · Cited by 188
Musallam, M., Yin, C., Bailey, C., & Johnson, M. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2358555 · Cited by 168
Li, F., & Xu, J. (2015) · Microelectronics Reliability · doi:10.1016/j.microrel.2015.02.025 · Cited by 150
Failure modes, mechanisms and effect analysis on temperature redundant sensor stage
Catelani, M., Ciani, L., & Venzi, M. (2018) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2018.08.013 · Cited by 72
Wang, D., Kong, J.-Z., Zhao, Y., & Tsui, K.-L. (2019) · Measurement · doi:10.1016/j.measurement.2019.07.064 · Cited by 71
(2007) · Cited by 42
Specification analysis of the deteriorating sensor for required lifetime prognostic performance
Zhang, J.-X., Si, X.-S., Du, D.-B., & Hu, C.-H. (2018) · Microelectronics Reliability · doi:10.1016/j.microrel.2018.04.004 · Cited by 7
Sun, J., Zuo, H., & Pecht, M. G. (2011) · 2011 Prognostics and System Health Managment Confernece · doi:10.1109/phm.2011.5939505 · Cited by 7
Self-citation
Metadata
- Authors
- Pecht, M. G.
- Venue
- Wiley eBooks
- Publisher
- Wiley
- Published
- 2008-02-25
- OpenAlex
- W2116870707
- Cited by
- 847
- References
- 9
- FWCI
- 74.75
- Type
- book
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.