CoChat

Compact Dielectric Elastomer Linear Actuators

The DOI matches its Crossref record; 29 of the 29 references it cites were found in a registry or an index.

Abstract

The design and fabrication of a rolled dielectric elastomer actuator is described and the parametric dependence of the displacement and blocked force on the actuator geometry, elastomer layer thickness, voltage, and number of turns is analyzed. Combinations of different elastomers and carbon nanotube electrodes are investigated and optimized to meet performance characteristics appropriate to tactile display applications, namely operation up to 200 Hz with a combination of a 1 N blocked force and free displacement of 1 mm, all within a volume of less than 1 cm 3 . Lives in excess of 50 000 cycles have been obtained. Key to meeting these objectives is control of the multilayering fabrication process, the carbon nanotube electrode concentration, the selection of a soft elastomer with low viscous losses, and a proof‐testing procedure for enhancing life cycle reliability.

Overview

Integrity signals

Registry

Crossref · 10.1002/adfm.201804328

Cites

29 of 29 references verified0 citation errors · 0 not checkable

Statistics

Recomputing p-values needs the paper’s full text.

Verification

Claims the paper makes

This paper’s full text isn’t openly available, so its claims and self-check weren’t run. The registry and citation checks still apply.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Citations

Cites

Show all 29 references

Research works printed but not linked: 4

  1. Matysek M., 2009, World Haptics 2009 – Third Joint EuroHaptics Conf. and Symp. on Haptic Interfaces for Virtual Environment and Teleoperator Systems
  2. Zhang R., 2006, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring
  3. Israr A., 2006, 2006 IEEE/RSJ Int. Conf. on Intelligent Robots and Systems
  4. Pelrine R. E., 2001, Proc. SPIE Electoactive Polymer Actuators and Devices

Cited by

Metadata

Authors
Zhao, H., Hussain, A. M., Duduta, M., Vogt, D. M., Wood, R. J., & Clarke, D. R.
Affiliations
Harvard University (US)
Corresponding author
  • Wood, Robert J.
  • Clarke, David R.
Venue
Advanced Functional Materials
Publisher
Wiley
Published
2018-09-04
Volume
28
Issue
42
ISSN
  • 1616-301X (ISSN-L)
  • 1616-3028
OpenAlex
W2891977477
Cited by
274
References
29
Citations by year
2026: 33 · 2025: 46 · 2024: 39 · 2023: 46 · 2022: 37 · 2021: 33 · 2020: 24 · 2019: 15 · 2018: 1
FWCI
7.29
Type
journal article
Language
en
Open access
closed
Locations
  • Advanced Functional Materials (publishedVersion)
  • Digital Access to Scholarship at Harvard (DASH) (Harvard University) (acceptedVersion)
Funders
  • Facebook
  • Harvard University
Topics
  • Physical Sciences › Materials Science › Electronic, Optical and Magnetic Materials › Dielectric materials and actuators
  • Physical Sciences › Materials Science › Materials Chemistry › Ferroelectric and Piezoelectric Materials
  • Physical Sciences › Engineering › Mechanical Engineering › Advanced Materials and Mechanics
Keywords
dielectric elastomer actuators, carbon nanotube electrodes, number of turns, tactile display, viscous losses, proof testing

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.