The DOI matches its Crossref record; 290 of the 290 references it cites were found in a registry or an index.
A Review of Perovskites Solar Cell Stability
Open accessAbstract
In this review, the factors influencing the power conversion efficiency (PCE) of perovskite solar cells (PSCs) is emphasized. The PCE of PSCs has remarkably increased from 3.8% to 23.7%, but on the other hand, poor stability is one of the main facets that creates a huge barrier in the commercialization of PSCs. Herein, a concise overview of the current efforts to enhance the stability of PSCs is provided; moreover, the degradation causes and mechanisms are summarized. The strategies to improve device stability are portrayed in terms of structural effects, a photoactive layer, hole‐ and electron‐transporting layers, electrode materials, and device encapsulation. Last but not least, the economic feasibility of PSCs is also vividly discussed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A low-cost, high-efficiency solar cell based on dye-sensitized colloidal TiO2 films
O'Regan, B., & Grätzel, M. (1991) · Nature · doi:10.1038/353737a0 · Cited by 28,599
Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells
Kojima, A., Teshima, K., Shirai, Y., & Miyasaka, T. (2009) · Journal of the American Chemical Society · doi:10.1021/ja809598r · Cited by 23,090
Efficient Hybrid Solar Cells Based on Meso-Superstructured Organometal Halide Perovskites
Lee, M. M., Teuscher, J., Miyasaka, T., Murakami, T. N., & Snaith, H. J. (2012) · Science · doi:10.1126/science.1228604 · Cited by 10,687
Sequential deposition as a route to high-performance perovskite-sensitized solar cells
Burschka, J., Pellet, N., Moon, S.-J., Humphry-Baker, R., Gao, P., Nazeeruddin, M. K., & Grätzel, M. (2013) · Nature · doi:10.1038/nature12340 · Cited by 9,547
Hagfeldt, A., Boschloo, G., Sun, L., Kloo, L., & Pettersson, H. (2010) · Chemical Reviews · doi:10.1021/cr900356p · Cited by 8,931
Kim, H.-S., Lee, C.-R., Im, J.-H., Lee, K.-B., Moehl, T., Marchioro, A., Moon, S.-J., Humphry-Baker, R., Yum, J.-H., Moser, J. E., et al. (2012) · Scientific Reports · doi:10.1038/srep00591 · Cited by 8,092
Efficient planar heterojunction perovskite solar cells by vapour deposition
Liu, M., Johnston, M. B., & Snaith, H. J. (2013) · Nature · doi:10.1038/nature12509 · Cited by 7,976
The emergence of perovskite solar cells
Green, M. A., Ho-Baillie, A., & Snaith, H. J. (2014) · Nature Photonics · doi:10.1038/nphoton.2014.134 · Cited by 7,432
Solvent engineering for high-performance inorganic–organic hybrid perovskite solar cells
Jeon, N. J., Noh, J. H., Kim, Y. C., Yang, W. S., Ryu, S., & Seok, S. I. (2014) · Nature Materials · doi:10.1038/nmat4014 · Cited by 6,723
Interface engineering of highly efficient perovskite solar cells
Zhou, H., Chen, Q., Li, G., Luo, S., Song, T.-B., Duan, H.-S., Hong, Z., You, J., Liu, Y., & Yang, Y. (2014) · Science · doi:10.1126/science.1254050 · Cited by 6,632
Self-citationCompositional engineering of perovskite materials for high-performance solar cells
Jeon, N. J., Noh, J. H., Yang, W. S., Kim, Y. C., Ryu, S., Seo, J., & Seok, S. I. (2015) · Nature · doi:10.1038/nature14133 · Cited by 6,431
High-performance photovoltaic perovskite layers fabricated through intramolecular exchange
Yang, W. S., Noh, J. H., Jeon, N. J., Kim, Y. C., Ryu, S., Seo, J., & Seok, S. I. (2015) · Science · doi:10.1126/science.aaa9272 · Cited by 6,251
Iodide management in formamidinium-lead-halide–based perovskite layers for efficient solar cells
Yang, W. S., Park, B.-W., Jung, E. H., Jeon, N. J., Kim, Y. C., Lee, D. U., Shin, S. S., Seo, J., Kim, E. K., Noh, J. H., et al. (2017) · Science · doi:10.1126/science.aan2301 · Cited by 5,445
Saliba, M., Matsui, T., Seo, J.-Y., Domanski, K., Correa-Baena, J.-P., Nazeeruddin, M. K., Zakeeruddin, S. M., Tress, W., Abate, A., Hagfeldt, A., et al. (2016) · Energy & Environmental Science · doi:10.1039/c5ee03874j · Cited by 5,440
Stoumpos, C. C., Malliakas, C. D., & Kanatzidis, M. G. (2013) · Inorganic Chemistry · doi:10.1021/ic401215x · Cited by 5,416
Noh, J. H., Im, S. H., Heo, J. H., Mandal, T. N., & Seok, S. I. (2013) · Nano Letters · doi:10.1021/nl400349b · Cited by 4,829
Mathew, S., Yella, A., Gao, P., Humphry-Baker, R., Curchod, B. F. E., Ashari-Astani, N., Tavernelli, I., Rothlisberger, U., Nazeeruddin, M. K., & Grätzel, M. (2014) · Nature Chemistry · doi:10.1038/nchem.1861 · Cited by 4,473
Eperon, G. E., Stranks, S. D., Menelaou, C., Johnston, M. B., Herz, L. M., & Snaith, H. J. (2014) · Energy & Environmental Science · doi:10.1039/c3ee43822h · Cited by 4,140
Incorporation of rubidium cations into perovskite solar cells improves photovoltaic performance
Saliba, M., Matsui, T., Domanski, K., Seo, J.-Y., Ummadisingu, A., Zakeeruddin, S. M., Correa-Baena, J.-P., Tress, W. R., Abate, A., Hagfeldt, A., et al. (2016) · Science · doi:10.1126/science.aah5557 · Cited by 3,706
Bach, U., Lupo, D., Comte, P., Moser, J. E., Weissörtel, F., Salbeck, J., Spreitzer, H., & Grätzel, M. (1998) · Nature · doi:10.1038/26936 · Cited by 3,528
High-efficiency two-dimensional Ruddlesden–Popper perovskite solar cells
Tsai, H., Nie, W., Blancon, J.-C., Stoumpos, C. C., Asadpour, R., Harutyunyan, B., Neukirch, A. J., Verduzco, R., Crochet, J. J., Tretiak, S., et al. (2016) · Nature · doi:10.1038/nature18306 · Cited by 3,384
A mixed-cation lead mixed-halide perovskite absorber for tandem solar cells
McMeekin, D. P., Sadoughi, G., Rehman, W., Eperon, G. E., Saliba, M., Hörantner, M. T., Haghighirad, A., Sakai, N., Korte, L., Rech, B., et al. (2016) · Science · doi:10.1126/science.aad5845 · Cited by 3,067
A hole-conductor–free, fully printable mesoscopic perovskite solar cell with high stability
Mei, A., Li, X., Liu, L., Ku, Z., Liu, T., Rong, Y., Xu, M., Hu, M., Chen, J., Yang, Y., et al. (2014) · Science · doi:10.1126/science.1254763 · Cited by 3,043
Self-citationShao, Y., Xiao, Z., Bi, C., Yuan, Y., & Huang, J. (2014) · Nature Communications · doi:10.1038/ncomms6784 · Cited by 3,025
Heo, J. H., Im, S. H., Noh, J. H., Mandal, T. N., Lim, C.-S., Chang, J. A., Lee, Y. H., Kim, H.-J., Sarkar, A., Nazeeruddin, M. K., et al. (2013) · Nature Photonics · doi:10.1038/nphoton.2013.80 · Cited by 2,684
Recent Advances in Sensitized Mesoscopic Solar Cells
Grätzel, M. (2009) · Accounts of Chemical Research · doi:10.1021/ar900141y · Cited by 2,671
Liu, D., & Kelly, T. L. (2014) · Nature Photonics · doi:10.1038/nphoton.2013.342 · Cited by 2,663
Baikie, T., Fang, Y., Kadro, J. M., Schreyer, M., Wei, F., Mhaisalkar, S. G., Graetzel, M., & White, T. J. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta10518k · Cited by 2,534
Solar cell efficiency tables (Version 45)
Green, M. A., Emery, K., Hishikawa, Y., Warta, W., & Dunlop, E. D. (2015) · Progress in Photovoltaics: Research and Applications · doi:10.1002/pip.2573 · Cited by 2,440
Stability/degradation of polymer solar cells
Jørgensen, M., Norrman, K., & Krebs, F. C. (2008) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2008.01.005 · Cited by 2,335
Efficient and stable large-area perovskite solar cells with inorganic charge extraction layers
Chen, W., Wu, Y., Yue, Y., Liu, J., Zhang, W., Yang, X., Chen, H., Bi, E., Ashraful, I., Grätzel, M., et al. (2015) · Science · doi:10.1126/science.aad1015 · Cited by 2,279
Li, Z., Yang, M., Park, J.-S., Wei, S.-H., Berry, J. J., & Zhu, K. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b04107 · Cited by 2,269
Intrinsic Thermal Instability of Methylammonium Lead Trihalide Perovskite
Conings, B., Drijkoningen, J., Gauquelin, N., Babayigit, A., D'Haen, J., D'Olieslaeger, L., Ethirajan, A., Verbeeck, J., Manca, J., Mosconi, E., et al. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500477 · Cited by 2,234
2D Homologous Perovskites as Light-Absorbing Materials for Solar Cell Applications
Cao, D. H., Stoumpos, C. C., Farha, O. K., Hupp, J. T., & Kanatzidis, M. G. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b03796 · Cited by 2,158
Zheng, X., Chen, B., Dai, J., Fang, Y., Bai, Y., Lin, Y., Wei, H., Zeng, X. C., & Huang, J. (2017) · Nature Energy · doi:10.1038/nenergy.2017.102 · Cited by 2,154
Improved air stability of perovskite solar cells via solution-processed metal oxide transport layers
You, J., Meng, L., Song, T.-B., Guo, T.-F., Yang, Y. (., Chang, W.-H., Hong, Z., Chen, H., Zhou, H., Chen, Q., et al. (2016) · Nature Nanotechnology · doi:10.1038/nnano.2015.230 · Cited by 2,123
Self-citationOne-Year stable perovskite solar cells by 2D/3D interface engineering
Grancini, G., Roldán-Carmona, C., Zimmermann, I., Mosconi, E., Lee, X., Martineau, D., Narbey, S., Oswald, F., De Angelis, F., Graetzel, M., et al. (2017) · Nature Communications · doi:10.1038/ncomms15684 · Cited by 2,068
Jiang, Q., Zhang, L., Wang, H., Yang, X., Meng, J., Liu, H., Yin, Z., Wu, J., Zhang, X., & You, J. (2016) · Nature Energy · doi:10.1038/nenergy.2016.177 · Cited by 2,024
A Layered Hybrid Perovskite Solar‐Cell Absorber with Enhanced Moisture Stability
Smith, I. C., Hoke, E. T., Solis‐Ibarra, D., McGehee, M. D., & Karunadasa, H. I. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201406466 · Cited by 2,011
Mesoscopic CH3NH3PbI3/TiO2Heterojunction Solar Cells
Etgar, L., Gao, P., Xue, Z., Peng, Q., Chandiran, A. K., Liu, B., Nazeeruddin, M. K., & Grätzel, M. (2012) · Journal of the American Chemical Society · doi:10.1021/ja307789s · Cited by 1,946
Sensitive X-ray detectors made of methylammonium lead tribromide perovskite single crystals
Wei, H., Fang, Y., Mulligan, P., Chuirazzi, W., Fang, H.-H., Wang, C., Ecker, B. R., Gao, Y., Loi, M. A., Cao, L., et al. (2016) · Nature Photonics · doi:10.1038/nphoton.2016.41 · Cited by 1,877
Leijtens, T., Eperon, G. E., Pathak, S., Abate, A., Lee, M. M., & Snaith, H. J. (2013) · Nature Communications · doi:10.1038/ncomms3885 · Cited by 1,867
Efficient luminescent solar cells based on tailored mixed-cation perovskites
Bi, D., Tress, W., Dar, M. I., Gao, P., Luo, J., Renevier, C., Schenk, K., Abate, A., Giordano, F., Correa Baena, J.-P., et al. (2016) · Science Advances · doi:10.1126/sciadv.1501170 · Cited by 1,864
ZnO Nanostructures for Dye‐Sensitized Solar Cells
Zhang, Q., Dandeneau, C. S., Zhou, X., & Cao, G. (2009) · Advanced Materials · doi:10.1002/adma.200803827 · Cited by 1,781
Organometal halide perovskite solar cells: degradation and stability
Berhe, T. A., Su, W.-N., Chen, C.-H., Pan, C.-J., Cheng, J.-H., Chen, H.-M., Tsai, M.-C., Chen, L.-Y., Dubale, A. A., & Hwang, B.-J. (2016) · Energy & Environmental Science · doi:10.1039/c5ee02733k · Cited by 1,779
Excitons versus free charges in organo-lead tri-halide perovskites
D’Innocenzo, V., Grancini, G., Alcocer, M. J. P., Kandada, A. R. S., Stranks, S. D., Lee, M. M., Lanzani, G., Snaith, H. J., & Petrozza, A. (2014) · Nature Communications · doi:10.1038/ncomms4586 · Cited by 1,767
Docampo, P., Ball, J. M., Darwich, M., Eperon, G. E., & Snaith, H. J. (2013) · Nature Communications · doi:10.1038/ncomms3761 · Cited by 1,703
Formamidinium and Cesium Hybridization for Photo‐ and Moisture‐Stable Perovskite Solar Cell
Lee, J., Kim, D., Kim, H., Seo, S., Cho, S. M., & Park, N. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201501310 · Cited by 1,663
Low-temperature processed meso-superstructured to thin-film perovskite solar cells
Ball, J. M., Lee, M. M., Hey, A., & Snaith, H. J. (2013) · Energy & Environmental Science · doi:10.1039/c3ee40810h · Cited by 1,662
Dynamic disorder in methylammoniumtrihalogenoplumbates (II) observed by millimeter-wave spectroscopy
Poglitsch, A., & Weber, D. (1987) · The Journal of Chemical Physics · doi:10.1063/1.453467 · Cited by 1,625
CH3NH3PbI3 Perovskite/Fullerene Planar‐Heterojunction Hybrid Solar Cells
Jeng, J., Chiang, Y., Lee, M., Peng, S., Guo, T., Chen, P., & Wen, T. (2013) · Advanced Materials · doi:10.1002/adma.201301327 · Cited by 1,572
Arora, N., Dar, M. I., Hinderhofer, A., Pellet, N., Schreiber, F., Zakeeruddin, S. M., & Grätzel, M. (2017) · Science · doi:10.1126/science.aam5655 · Cited by 1,546
23.6%-efficient monolithic perovskite/silicon tandem solar cells with improved stability
Bush, K. A., Palmstrom, A. F., Yu, Z. J., Boccard, M., Cheacharoen, R., Mailoa, J. P., McMeekin, D. P., Hoye, R. L. Z., Bailie, C. D., Leijtens, T., et al. (2017) · Nature Energy · doi:10.1038/nenergy.2017.9 · Cited by 1,545
Enhanced photovoltage for inverted planar heterojunction perovskite solar cells
Luo, D., Yang, W., Wang, Z., Sadhanala, A., Hu, Q., Su, R., Shivanna, R., Trindade, G. F., Watts, J. F., Xu, Z., et al. (2018) · Science · doi:10.1126/science.aap9282 · Cited by 1,510
Self-citationLiang, P., Liao, C., Chueh, C., Zuo, F., Williams, S. T., Xin, X., Lin, J., & Jen, A. K. ‐. (2014) · Advanced Materials · doi:10.1002/adma.201400231 · Cited by 1,452
Low-Temperature Solution-Processed Perovskite Solar Cells with High Efficiency and Flexibility
You, J., Hong, Z., Yang, Y. (., Chen, Q., Cai, M., Song, T.-B., Chen, C.-C., Lu, S., Liu, Y., Zhou, H., et al. (2014) · ACS Nano · doi:10.1021/nn406020d · Cited by 1,448
Self-citationLigand-Stabilized Reduced-Dimensionality Perovskites
Quan, L. N., Yuan, M., Comin, R., Voznyy, O., Beauregard, E. M., Hoogland, S., Buin, A., Kirmani, A. R., Zhao, K., Amassian, A., et al. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.5b11740 · Cited by 1,436
Wang, Z., Lin, Q., Chmiel, F. P., Sakai, N., Herz, L. M., & Snaith, H. J. (2017) · Nature Energy · doi:10.1038/nenergy.2017.135 · Cited by 1,409
Self-citationChristians, J. A., Miranda Herrera, P. A., & Kamat, P. V. (2015) · Journal of the American Chemical Society · doi:10.1021/ja511132a · Cited by 1,367
Reversible Hydration of CH3NH3PbI3 in Films, Single Crystals, and Solar Cells
Leguy, A. M. A., Hu, Y., Campoy-Quiles, M., Alonso, M. I., Weber, O. J., Azarhoosh, P., van Schilfgaarde, M., Weller, M. T., Bein, T., Nelson, J., et al. (2015) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b00660 · Cited by 1,366
Yang, J., Siempelkamp, B. D., Liu, D., & Kelly, T. L. (2015) · ACS Nano · doi:10.1021/nn506864k · Cited by 1,351
Stability of Metal Halide Perovskite Solar Cells
Leijtens, T., Eperon, G. E., Noel, N. K., Habisreutinger, S. N., Petrozza, A., & Snaith, H. J. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500963 · Cited by 1,308
The renaissance of dye-sensitized solar cells
Hardin, B. E., Snaith, H. J., & McGehee, M. D. (2012) · Nature Photonics · doi:10.1038/nphoton.2012.22 · Cited by 1,304
Amat, A., Mosconi, E., Ronca, E., Quarti, C., Umari, P., Nazeeruddin, M. K., Grätzel, M., & De Angelis, F. (2014) · Nano Letters · doi:10.1021/nl5012992 · Cited by 1,285
Yi, C., Luo, J., Meloni, S., Boziki, A., Ashari-Astani, N., Grätzel, C., Zakeeruddin, S. M., Röthlisberger, U., & Grätzel, M. (2016) · Energy & Environmental Science · doi:10.1039/c5ee03255e · Cited by 1,281
Planar‐Structure Perovskite Solar Cells with Efficiency beyond 21%
Jiang, Q., Chu, Z., Wang, P., Yang, X., Liu, H., Wang, Y., Yin, Z., Wu, J., Zhang, X., & You, J. (2017) · Advanced Materials · doi:10.1002/adma.201703852 · Cited by 1,250
Not All That Glitters Is Gold: Metal-Migration-Induced Degradation in Perovskite Solar Cells
Domanski, K., Correa-Baena, J.-P., Mine, N., Nazeeruddin, M. K., Abate, A., Saliba, M., Tress, W., Hagfeldt, A., & Grätzel, M. (2016) · ACS Nano · doi:10.1021/acsnano.6b02613 · Cited by 1,245
Xiao, Z., Bi, C., Shao, Y., Dong, Q., Wang, Q., Yuan, Y., Wang, C., Gao, Y., & Huang, J. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee01138d · Cited by 1,234
Krebs, F. C., Gevorgyan, S. A., & Alstrup, J. (2009) · Journal of Materials Chemistry · doi:10.1039/b823001c · Cited by 1,229
Ke, W., Fang, G., Liu, Q., Xiong, L., Qin, P., Tao, H., Wang, J., Lei, H., Li, B., Wan, J., et al. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b01994 · Cited by 1,228
Habisreutinger, S. N., Leijtens, T., Eperon, G. E., Stranks, S. D., Nicholas, R. J., & Snaith, H. J. (2014) · Nano Letters · doi:10.1021/nl501982b · Cited by 1,210
Heo, J. H., Han, H. J., Kim, D., Ahn, T. K., & Im, S. H. (2015) · Energy & Environmental Science · doi:10.1039/c5ee00120j · Cited by 1,187
Li, X., Ibrahim Dar, M., Yi, C., Luo, J., Tschumi, M., Zakeeruddin, S. M., Nazeeruddin, M. K., Han, H., & Grätzel, M. (2015) · Nature Chemistry · doi:10.1038/nchem.2324 · Cited by 1,183
Towards stable and commercially available perovskite solar cells
Park, N.-G., Grätzel, M., Miyasaka, T., Zhu, K., & Emery, K. (2016) · Nature Energy · doi:10.1038/nenergy.2016.152 · Cited by 1,182
Colloidally prepared La-doped BaSnO 3 electrodes for efficient, photostable perovskite solar cells
Shin, S. S., Yeom, E. J., Yang, W. S., Hur, S., Kim, M. G., Im, J., Seo, J., Noh, J. H., & Seok, S. I. (2017) · Science · doi:10.1126/science.aam6620 · Cited by 1,163
Two‐Inch‐Sized Perovskite CH3NH3PbX3 (X = Cl, Br, I) Crystals: Growth and Characterization
Liu, Y., Yang, Z., Cui, D., Ren, X., Sun, J., Liu, X., Zhang, J., Wei, Q., Fan, H., Yu, F., et al. (2015) · Advanced Materials · doi:10.1002/adma.201502597 · Cited by 1,123
Sun, S., Salim, T., Mathews, N., Duchamp, M., Boothroyd, C., Xing, G., Sum, T. C., & Lam, Y. M. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee43161d · Cited by 1,109
Kulbak, M., Cahen, D., & Hodes, G. (2015) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.5b00968 · Cited by 1,103
Extremely efficient internal exciton dissociation through edge states in layered 2D perovskites
Blancon, J.-C., Tsai, H., Nie, W., Stoumpos, C. C., Pedesseau, L., Katan, C., Kepenekian, M., Soe, C. M. M., Appavoo, K., Sfeir, M. Y., et al. (2017) · Science · doi:10.1126/science.aal4211 · Cited by 1,102
Steric engineering of metal-halide perovskites with tunable optical band gaps
Filip, M. R., Eperon, G. E., Snaith, H. J., & Giustino, F. (2014) · Nature Communications · doi:10.1038/ncomms6757 · Cited by 1,081
Niu, G., Li, W., Meng, F., Wang, L., Dong, H., & Qiu, Y. (2014) · J. Mater. Chem. A · doi:10.1039/c3ta13606j · Cited by 1,075
Wang, J. T.-W., Ball, J. M., Barea, E. M., Abate, A., Alexander-Webber, J. A., Huang, J., Saliba, M., Mora-Sero, I., Bisquert, J., Snaith, H. J., et al. (2014) · Nano Letters · doi:10.1021/nl403997a · Cited by 1,072
Kim, H.-S., & Park, N.-G. (2014) · The Journal of Physical Chemistry Letters · doi:10.1021/jz501392m · Cited by 1,065
Methylammonium-free, high-performance, and stable perovskite solar cells on a planar architecture
Turren-Cruz, S.-H., Hagfeldt, A., & Saliba, M. (2018) · Science · doi:10.1126/science.aat3583 · Cited by 1,055
Self-formed grain boundary healing layer for highly efficient CH3NH3PbI3 perovskite solar cells
Son, D.-Y., Lee, J.-W., Choi, Y. J., Jang, I.-H., Lee, S., Yoo, P. J., Shin, H., Ahn, N., Choi, M., Kim, D., et al. (2016) · Nature Energy · doi:10.1038/nenergy.2016.81 · Cited by 1,053
Solid-state principles applied to organic–inorganic perovskites: new tricks for an old dog
Kieslich, G., Sun, S., & Cheetham, A. K. (2014) · Chem. Sci. · doi:10.1039/c4sc02211d · Cited by 1,030
Kaltenbrunner, M., Adam, G., Głowacki, E. D., Drack, M., Schwödiauer, R., Leonat, L., Apaydin, D. H., Groiss, H., Scharber, M. C., White, M. S., et al. (2015) · Nature Materials · doi:10.1038/nmat4388 · Cited by 1,024
Bryant, D., Aristidou, N., Pont, S., Sanchez-Molina, I., Chotchunangatchaval, T., Wheeler, S., Durrant, J. R., & Haque, S. A. (2016) · Energy & Environmental Science · doi:10.1039/c6ee00409a · Cited by 1,023
Han, Y., Meyer, S., Dkhissi, Y., Weber, K., Pringle, J. M., Bach, U., Spiccia, L., & Cheng, Y.-B. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta00358j · Cited by 1,002
The Role of Oxygen in the Degradation of Methylammonium Lead Trihalide Perovskite Photoactive Layers
Aristidou, N., Sanchez‐Molina, I., Chotchuangchutchaval, T., Brown, M., Martinez, L., Rath, T., & Haque, S. A. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201503153 · Cited by 969
High‐Efficiency Perovskite Solar Cells Based on the Black Polymorph of HC(NH2)2PbI3
Lee, J., Seol, D., Cho, A., & Park, N. (2014) · Advanced Materials · doi:10.1002/adma.201401137 · Cited by 951
Kim, H.-S., Lee, J.-W., Yantara, N., Boix, P. P., Kulkarni, S. A., Mhaisalkar, S., Grätzel, M., & Park, N.-G. (2013) · Nano Letters · doi:10.1021/nl400286w · Cited by 942
Toward Large Scale Roll‐to‐Roll Production of Fully Printed Perovskite Solar Cells
Hwang, K., Jung, Y., Heo, Y., Scholes, F. H., Watkins, S. E., Subbiah, J., Jones, D. J., Kim, D., & Vak, D. (2015) · Advanced Materials · doi:10.1002/adma.201404598 · Cited by 930
Highly Reproducible Sn‐Based Hybrid Perovskite Solar Cells with 9% Efficiency
Shao, S., Liu, J., Portale, G., Fang, H., Blake, G. R., ten Brink, G. H., Koster, L. J. A., & Loi, M. A. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201702019 · Cited by 904
2D Ruddlesden–Popper Perovskites for Optoelectronics
Chen, Y., Sun, Y., Peng, J., Tang, J., Zheng, K., & Liang, Z. (2018) · Advanced Materials · doi:10.1002/adma.201703487 · Cited by 892
Wang, Q., Chen, B., Liu, Y., Deng, Y., Bai, Y., Dong, Q., & Huang, J. (2017) · Energy & Environmental Science · doi:10.1039/c6ee02941h · Cited by 886
Ku, Z., Rong, Y., Xu, M., Liu, T., & Han, H. (2013) · Scientific Reports · doi:10.1038/srep03132 · Cited by 877
Improving efficiency and stability of perovskite solar cells with photocurable fluoropolymers
Bella, F., Griffini, G., Correa-Baena, J.-P., Saracco, G., Grätzel, M., Hagfeldt, A., Turri, S., & Gerbaldi, C. (2016) · Science · doi:10.1126/science.aah4046 · Cited by 870
Highly efficient and stable planar perovskite solar cells by solution-processed tin oxide
Anaraki, E. H., Kermanpur, A., Steier, L., Domanski, K., Matsui, T., Tress, W., Saliba, M., Abate, A., Grätzel, M., Hagfeldt, A., et al. (2016) · Energy & Environmental Science · doi:10.1039/c6ee02390h · Cited by 848
Kato, Y., Ono, L. K., Lee, M. V., Wang, S., Raga, S. R., & Qi, Y. (2015) · Advanced Materials Interfaces · doi:10.1002/admi.201500195 · Cited by 844
Wang, Q., Shao, Y., Dong, Q., Xiao, Z., Yuan, Y., & Huang, J. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee00233d · Cited by 832
The Renaissance of Halide Perovskites and Their Evolution as Emerging Semiconductors
Stoumpos, C. C., & Kanatzidis, M. G. (2015) · Accounts of Chemical Research · doi:10.1021/acs.accounts.5b00229 · Cited by 820
Moisture assisted perovskite film growth for high performance solar cells
You, J., Yang, Y. (., Hong, Z., Song, T.-B., Meng, L., Liu, Y., Jiang, C., Zhou, H., Chang, W.-H., Li, G., et al. (2014) · Applied Physics Letters · doi:10.1063/1.4901510 · Cited by 786
Self-citationLight-induced lattice expansion leads to high-efficiency perovskite solar cells
Tsai, H., Asadpour, R., Blancon, J.-C., Stoumpos, C. C., Durand, O., Strzalka, J. W., Chen, B., Verduzco, R., Ajayan, P. M., Tretiak, S., et al. (2018) · Science · doi:10.1126/science.aap8671 · Cited by 770
Efficient planar heterojunction mixed-halide perovskite solar cells deposited via spray-deposition
Barrows, A. T., Pearson, A. J., Kwak, C. K., Dunbar, A. D. F., Buckley, A. R., & Lidzey, D. G. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee01546k · Cited by 765
Correlation of energy disorder and open-circuit voltage in hybrid perovskite solar cells
Shao, Y., Yuan, Y., & Huang, J. (2016) · Nature Energy · doi:10.1038/nenergy.2015.1 · Cited by 757
Polymer-modified halide perovskite films for efficient and stable planar heterojunction solar cells
Zuo, L., Guo, H., deQuilettes, D. W., Jariwala, S., De Marco, N., Dong, S., DeBlock, R., Ginger, D. S., Dunn, B., Wang, M., et al. (2017) · Science Advances · doi:10.1126/sciadv.1700106 · Cited by 749
Self-citation2D perovskite stabilized phase-pure formamidinium perovskite solar cells
Lee, J.-W., Dai, Z., Han, T.-H., Choi, C., Chang, S.-Y., Lee, S.-J., De Marco, N., Zhao, H., Sun, P., Huang, Y., et al. (2018) · Nature Communications · doi:10.1038/s41467-018-05454-4 · Cited by 746
Self-citationA dopant-free hole-transporting material for efficient and stable perovskite solar cells
Liu, J., Wu, Y., Qin, C., Yang, X., Yasuda, T., Islam, A., Zhang, K., Peng, W., Chen, W., & Han, L. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee01589d · Cited by 719
A solvent- and vacuum-free route to large-area perovskite films for efficient solar modules
Chen, H., Ye, F., Tang, W., He, J., Yin, M., Wang, Y., Xie, F., Bi, E., Yang, X., Grätzel, M., et al. (2017) · Nature · doi:10.1038/nature23877 · Cited by 716
Jeng, J., Chen, K., Chiang, T., Lin, P., Tsai, T., Chang, Y., Guo, T., Chen, P., Wen, T., & Hsu, Y. (2014) · Advanced Materials · doi:10.1002/adma.201306217 · Cited by 710
Conings, B., Baeten, L., De Dobbelaere, C., D'Haen, J., Manca, J., & Boyen, H. (2014) · Advanced Materials · doi:10.1002/adma.201304803 · Cited by 691
Zhang, T., Dar, M. I., Li, G., Xu, F., Guo, N., Grätzel, M., & Zhao, Y. (2017) · Science Advances · doi:10.1126/sciadv.1700841 · Cited by 647
Wu, Y., Yang, X., Chen, W., Yue, Y., Cai, M., Xie, F., Bi, E., Islam, A., & Han, L. (2016) · Nature Energy · doi:10.1038/nenergy.2016.148 · Cited by 644
Ran, C., Xu, J., Gao, W., Huang, C., & Dou, S. (2018) · Chemical Society Reviews · doi:10.1039/c7cs00868f · Cited by 634
Extrinsic ion migration in perovskite solar cells
Li, Z., Xiao, C., Yang, Y., Harvey, S. P., Kim, D. H., Christians, J. A., Yang, M., Schulz, P., Nanayakkara, S. U., Jiang, C.-S., et al. (2017) · Energy & Environmental Science · doi:10.1039/c7ee00358g · Cited by 631
Self-citationPerovskite photovoltaics: life-cycle assessment of energy and environmental impacts
Gong, J., Darling, S. B., & You, F. (2015) · Energy & Environmental Science · doi:10.1039/c5ee00615e · Cited by 619
Saliba, M., Correa-Baena, J.-P., Wolff, C. M., Stolterfoht, M., Phung, N., Albrecht, S., Neher, D., & Abate, A. (2018) · Chemistry of Materials · doi:10.1021/acs.chemmater.8b00136 · Cited by 618
Perovskite ink with wide processing window for scalable high-efficiency solar cells
Yang, M., Li, Z., Reese, M. O., Reid, O. G., Kim, D. H., Siol, S., Klein, T. R., Yan, Y., Berry, J. J., van Hest, M. F. A. M., et al. (2017) · Nature Energy · doi:10.1038/nenergy.2017.38 · Cited by 614
Trapped charge-driven degradation of perovskite solar cells
Ahn, N., Kwak, K., Jang, M. S., Yoon, H., Lee, B. Y., Lee, J.-K., Pikhitsa, P. V., Byun, J., & Choi, M. (2016) · Nature Communications · doi:10.1038/ncomms13422 · Cited by 606
Di Giacomo, F., Zardetto, V., D'Epifanio, A., Pescetelli, S., Matteocci, F., Razza, S., Di Carlo, A., Licoccia, S., Kessels, W. M. M., Creatore, M., et al. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201401808 · Cited by 595
Stability of Perovskite Solar Cells: A Prospective on the Substitution of the A Cation and X Anion
Wang, Z., Shi, Z., Li, T., Chen, Y., & Huang, W. (2017) · Angewandte Chemie International Edition · doi:10.1002/anie.201603694 · Cited by 595
Self-citationSub-150 °C processed meso-superstructured perovskite solar cells with enhanced efficiency
Wojciechowski, K., Saliba, M., Leijtens, T., Abate, A., & Snaith, H. J. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee43707h · Cited by 592
Bulk crystal growth of hybrid perovskite material CH3NH3PbI3
Dang, Y., Liu, Y., Sun, Y., Yuan, D., Liu, X., Lu, W., Liu, G., Xia, H., & Tao, X. (2015) · CrystEngComm · doi:10.1039/c4ce02106a · Cited by 590
Efficient and stable perovskite solar cells prepared in ambient air irrespective of the humidity
Tai, Q., You, P., Sang, H., Liu, Z., Hu, C., Chan, H. L. W., & Yan, F. (2016) · Nature Communications · doi:10.1038/ncomms11105 · Cited by 590
Ito, S., Tanaka, S., Manabe, K., & Nishino, H. (2014) · The Journal of Physical Chemistry C · doi:10.1021/jp500449z · Cited by 585
Huang, S., Li, Z., Kong, L., Zhu, N., Shan, A., & Li, L. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.5b13101 · Cited by 581
The Importance of Moisture in Hybrid Lead Halide Perovskite Thin Film Fabrication
Eperon, G. E., Habisreutinger, S. N., Leijtens, T., Bruijnaers, B. J., van Franeker, J. J., deQuilettes, D. W., Pathak, S., Sutton, R. J., Grancini, G., Ginger, D. S., et al. (2015) · ACS Nano · doi:10.1021/acsnano.5b03626 · Cited by 574
Stabilization of the Trigonal High-Temperature Phase of Formamidinium Lead Iodide
Binek, A., Hanusch, F. C., Docampo, P., & Bein, T. (2015) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.5b00380 · Cited by 572
Yang, T., Gregori, G., Pellet, N., Grätzel, M., & Maier, J. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201500014 · Cited by 553
Park, J. H., Seo, J., Park, S., Shin, S. S., Kim, Y. C., Jeon, N. J., Shin, H., Ahn, T. K., Noh, J. H., Yoon, S. C., et al. (2015) · Advanced Materials · doi:10.1002/adma.201500523 · Cited by 550
Cesium-doped methylammonium lead iodide perovskite light absorber for hybrid solar cells
Choi, H., Jeong, J., Kim, H.-B., Kim, S., Walker, B., Kim, G.-H., & Kim, J. Y. (2014) · Nano Energy · doi:10.1016/j.nanoen.2014.04.017 · Cited by 544
Hailegnaw, B., Kirmayer, S., Edri, E., Hodes, G., & Cahen, D. (2015) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.5b00504 · Cited by 523
High efficiency solid-state photovoltaic device due to inhibition of interface charge recombination
Krüger, J., Plass, R., Cevey, L., Piccirelli, M., Grätzel, M., & Bach, U. (2001) · Applied Physics Letters · doi:10.1063/1.1406148 · Cited by 522
Interfacial Degradation of Planar Lead Halide Perovskite Solar Cells
Guerrero, A., You, J., Aranda, C., Kang, Y. S., Garcia-Belmonte, G., Zhou, H., Bisquert, J., & Yang, Y. (2016) · ACS Nano · doi:10.1021/acsnano.5b03687 · Cited by 520
Self-citationZhu, Z., Bai, Y., Liu, X., Chueh, C., Yang, S., & Jen, A. K. ‐. (2016) · Advanced Materials · doi:10.1002/adma.201600619 · Cited by 499
Xie, F., Chen, C., Wu, Y., Li, X., Cai, M., Liu, X., Yang, X., & Han, L. (2017) · Energy & Environmental Science · doi:10.1039/c7ee01675a · Cited by 499
Beyond Efficiency: the Challenge of Stability in Mesoscopic Perovskite Solar Cells
Rong, Y., Liu, L., Mei, A., Li, X., & Han, H. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201501066 · Cited by 473
Fu, Y., Zhu, H., Schrader, A. W., Liang, D., Ding, Q., Joshi, P., Hwang, L., Zhu, X.-Y., & Jin, S. (2016) · Nano Letters · doi:10.1021/acs.nanolett.5b04053 · Cited by 471
Improving the Stability of Metal Halide Perovskite Materials and Light‐Emitting Diodes
Cho, H., Kim, Y., Wolf, C., Lee, H., & Lee, T. (2018) · Advanced Materials · doi:10.1002/adma.201704587 · Cited by 470
Electronic Structure of TiO2/CH3NH3PbI3 Perovskite Solar Cell Interfaces
Lindblad, R., Bi, D., Park, B.-W., Oscarsson, J., Gorgoi, M., Siegbahn, H., Odelius, M., Johansson, E. M. J., & Rensmo, H. (2014) · The Journal of Physical Chemistry Letters · doi:10.1021/jz402749f · Cited by 469
Current status of electron transport layers in perovskite solar cells: materials and properties
Mahmood, K., Sarwar, S., & Mehran, M. T. (2017) · RSC Advances · doi:10.1039/c7ra00002b · Cited by 468
Philippe, B., Park, B.-W., Lindblad, R., Oscarsson, J., Ahmadi, S., Johansson, E. M. J., & Rensmo, H. (2015) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b00348 · Cited by 462
Compact Layer Free Perovskite Solar Cells with 13.5% Efficiency
Liu, D., Yang, J., & Kelly, T. L. (2014) · Journal of the American Chemical Society · doi:10.1021/ja508758k · Cited by 460
Bhandari, K. P., Collier, J. M., Ellingson, R. J., & Apul, D. S. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.02.057 · Cited by 459
Wei, Z., Chen, H., Yan, K., & Yang, S. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201408638 · Cited by 456
Hawash, Z., Ono, L. K., & Qi, Y. (2018) · Advanced Materials Interfaces · doi:10.1002/admi.201700623 · Cited by 455
Recent Progress on the Long‐Term Stability of Perovskite Solar Cells
Fu, Q., Tang, X., Huang, B., Hu, T., Tan, L., Chen, L., & Chen, Y. (2018) · Advanced Science · doi:10.1002/advs.201700387 · Cited by 454
Diffusion engineering of ions and charge carriers for stable efficient perovskite solar cells
Bi, E., Chen, H., Xie, F., Wu, Y., Chen, W., Su, Y., Islam, A., Grätzel, M., Yang, X., & Han, L. (2017) · Nature Communications · doi:10.1038/ncomms15330 · Cited by 451
Perovskite Solar Cells with ZnO Electron‐Transporting Materials
Zhang, P., Wu, J., Zhang, T., Wang, Y., Liu, D., Chen, H., Ji, L., Liu, C., Ahmad, W., Chen, Z. D., et al. (2018) · Advanced Materials · doi:10.1002/adma.201703737 · Cited by 450
Hole Selective NiO Contact for Efficient Perovskite Solar Cells with Carbon Electrode
Xu, X., Liu, Z., Zuo, Z., Zhang, M., Zhao, Z., Shen, Y., Zhou, H., Chen, Q., Yang, Y., & Wang, M. (2015) · Nano Letters · doi:10.1021/nl504701y · Cited by 445
Self-citationYella, A., Heiniger, L.-P., Gao, P., Nazeeruddin, M. K., & Grätzel, M. (2014) · Nano Letters · doi:10.1021/nl500399m · Cited by 430
Recombination Study of Combined Halides (Cl, Br, I) Perovskite Solar Cells
Suarez, B., Gonzalez-Pedro, V., Ripolles, T. S., Sanchez, R. S., Otero, L., & Mora-Sero, I. (2014) · The Journal of Physical Chemistry Letters · doi:10.1021/jz5006797 · Cited by 428
Qiu, J., Qiu, Y., Yan, K., Zhong, M., Mu, C., Yan, H., & Yang, S. (2013) · Nanoscale · doi:10.1039/c3nr00218g · Cited by 425
Is Excess PbI2 Beneficial for Perovskite Solar Cell Performance?
Liu, F., Dong, Q., Wong, M. K., Djurišić, A. B., Ng, A., Ren, Z., Shen, Q., Surya, C., Chan, W. K., Wang, J., et al. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201502206 · Cited by 425
Stoumpos, C. C., Soe, C. M. M., Tsai, H., Nie, W., Blancon, J.-C., Cao, D. H., Liu, F., Traoré, B., Katan, C., Even, J., et al. (2017) · Chem · doi:10.1016/j.chempr.2017.02.004 · Cited by 418
Kwon, Y. S., Lim, J., Yun, H.-J., Kim, Y.-H., & Park, T. (2014) · Energy & Environmental Science · doi:10.1039/c3ee44174a · Cited by 403
Chemical Reduction of Intrinsic Defects in Thicker Heterojunction Planar Perovskite Solar Cells
Liu, Z., Hu, J., Jiao, H., Li, L., Zheng, G., Chen, Y., Huang, Y., Zhang, Q., Shen, C., Chen, Q., et al. (2017) · Advanced Materials · doi:10.1002/adma.201606774 · Cited by 383
Wong, K. W., Yip, H., Luo, Y., Wong, K. Y., Lau, W., Low, K., Chow, H., Gao, Z., Yeung, W. L., & Chang, C. C. (2002) · Applied Physics Letters · doi:10.1063/1.1469220 · Cited by 381
Improving the Long-Term Stability of Perovskite Solar Cells with a Porous Al2O3 Buffer Layer
Guarnera, S., Abate, A., Zhang, W., Foster, J. M., Richardson, G., Petrozza, A., & Snaith, H. J. (2015) · The Journal of Physical Chemistry Letters · doi:10.1021/jz502703p · Cited by 381
C60 as an Efficient n-Type Compact Layer in Perovskite Solar Cells
Wojciechowski, K., Leijtens, T., Siprova, S., Schlueter, C., Hörantner, M. T., Wang, J. T.-W., Li, C.-Z., Jen, A. K.-Y., Lee, T.-L., & Snaith, H. J. (2015) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.5b00902 · Cited by 374
Song, J., Zheng, E., Bian, J., Wang, X.-F., Tian, W., Sanehira, Y., & Miyasaka, T. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta01207d · Cited by 366
Ultrafast Electron Dynamics in Solar Energy Conversion
Ponseca, C. S., Chábera, P., Uhlig, J., Persson, P., & Sundström, V. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00807 · Cited by 362
Yeo, J.-S., Kang, R., Lee, S., Jeon, Y.-J., Myoung, N., Lee, C.-L., Kim, D.-Y., Yun, J.-M., Seo, Y.-H., Kim, S.-S., et al. (2015) · Nano Energy · doi:10.1016/j.nanoen.2014.12.022 · Cited by 358
Chen, Y., Sun, Y., Peng, J., Zhang, W., Su, X., Zheng, K., Pullerits, T., & Liang, Z. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700162 · Cited by 358
Mesoscopic Solar Cells for Electricity and Hydrogen Production from Sunlight
Grätzel, M. (2005) · Chemistry Letters · doi:10.1246/cl.2005.8 · Cited by 357
Perovskite Solar Cell with an Efficient TiO2 Compact Film
Ke, W., Fang, G., Wang, J., Qin, P., Tao, H., Lei, H., Liu, Q., Dai, X., & Zhao, X. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am503728d · Cited by 354
Enhancing Stability of Perovskite Solar Cells to Moisture by the Facile Hydrophobic Passivation
Hwang, I., Jeong, I., Lee, J., Ko, M. J., & Yong, K. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b04490 · Cited by 351
Material and Device Stability in Perovskite Solar Cells
Kim, H., Seo, J., & Park, N. (2016) · ChemSusChem · doi:10.1002/cssc.201600915 · Cited by 346
Chiang, C.-H., Tseng, Z.-L., & Wu, C.-G. (2014) · J. Mater. Chem. A · doi:10.1039/c4ta03674c · Cited by 338
Xu, P., Chen, S., Xiang, H.-J., Gong, X.-G., & Wei, S.-H. (2014) · Chemistry of Materials · doi:10.1021/cm503122j · Cited by 338
Achieving long-term stable perovskite solar cells via ion neutralization
Back, H., Kim, G., Kim, J., Kong, J., Kim, T. K., Kang, H., Kim, H., Lee, J., Lee, S., & Lee, K. (2016) · Energy & Environmental Science · doi:10.1039/c6ee00612d · Cited by 337
Guo, F., Azimi, H., Hou, Y., Przybilla, T., Hu, M., Bronnbauer, C., Langner, S., Spiecker, E., Forberich, K., & Brabec, C. J. (2015) · Nanoscale · doi:10.1039/c4nr06033d · Cited by 337
Sun, C., Wu, Z., Yip, H., Zhang, H., Jiang, X., Xue, Q., Hu, Z., Hu, Z., Shen, Y., Wang, M., et al. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201501534 · Cited by 331
Conjugated polyelectrolyte hole transport layer for inverted-type perovskite solar cells
Choi, H., Mai, C.-K., Kim, H.-B., Jeong, J., Song, S., Bazan, G. C., Kim, J. Y., & Heeger, A. J. (2015) · Nature Communications · doi:10.1038/ncomms8348 · Cited by 323
Yan, J., & Saunders, B. R. (2014) · RSC Adv. · doi:10.1039/c4ra07064j · Cited by 320
Wang, Q., Bi, C., & Huang, J. (2015) · Nano Energy · doi:10.1016/j.nanoen.2015.04.029 · Cited by 309
Meng, L., Sun, C., Wang, R., Huang, W., Zhao, Z., Sun, P., Huang, T., Xue, J., Lee, J.-W., Zhu, C., et al. (2018) · Journal of the American Chemical Society · doi:10.1021/jacs.8b10520 · Cited by 308
Self-citationIs Cu a stable electrode material in hybrid perovskite solar cells for a 30-year lifetime?
Zhao, J., Zheng, X., Deng, Y., Li, T., Shao, Y., Gruverman, A., Shield, J., & Huang, J. (2016) · Energy & Environmental Science · doi:10.1039/c6ee02980a · Cited by 303
Wang, Z., McMeekin, D. P., Sakai, N., van Reenen, S., Wojciechowski, K., Patel, J. B., Johnston, M. B., & Snaith, H. J. (2017) · Advanced Materials · doi:10.1002/adma.201604186 · Cited by 303
Self-citationHysteresis-free low-temperature-processed planar perovskite solar cells with 19.1% efficiency
Yoon, H., Kang, S. M., Lee, J.-K., & Choi, M. (2016) · Energy & Environmental Science · doi:10.1039/c6ee01037g · Cited by 302
Surface Ligand Management for Stable FAPbI3 Perovskite Quantum Dot Solar Cells
Xue, J., Lee, J.-W., Dai, Z., Wang, R., Nuryyeva, S., Liao, M. E., Chang, S.-Y., Meng, L., Meng, D., Sun, P., et al. (2018) · Joule · doi:10.1016/j.joule.2018.07.018 · Cited by 294
Self-citationWakamiya, A., Endo, M., Sasamori, T., Tokitoh, N., Ogomi, Y., Hayase, S., & Murata, Y. (2014) · Chemistry Letters · doi:10.1246/cl.140074 · Cited by 293
Sanehira, E. M., Tremolet de Villers, B. J., Schulz, P., Reese, M. O., Ferrere, S., Zhu, K., Lin, L. Y., Berry, J. J., & Luther, J. M. (2016) · ACS Energy Letters · doi:10.1021/acsenergylett.6b00013 · Cited by 285
Encapsulation for improving the lifetime of flexible perovskite solar cells
Weerasinghe, H. C., Dkhissi, Y., Scully, A. D., Caruso, R. A., & Cheng, Y.-B. (2015) · Nano Energy · doi:10.1016/j.nanoen.2015.10.006 · Cited by 284
Grain‐Boundary “Patches” by In Situ Conversion to Enhance Perovskite Solar Cells Stability
Liu, L., Huang, S., Lu, Y., Liu, P., Zhao, Y., Shi, C., Zhang, S., Wu, J., Zhong, H., Sui, M., et al. (2018) · Advanced Materials · doi:10.1002/adma.201800544 · Cited by 283
Efficient and stable CH3NH3PbI3-sensitized ZnO nanorod array solid-state solar cells
Bi, D., Boschloo, G., Schwarzmüller, S., Yang, L., Johansson, E. M. J., & Hagfeldt, A. (2013) · Nanoscale · doi:10.1039/c3nr01542d · Cited by 281
Influence of Air Annealing on High Efficiency Planar Structure Perovskite Solar Cells
Raga, S. R., Jung, M.-C., Lee, M. V., Leyden, M. R., Kato, Y., & Qi, Y. (2015) · Chemistry of Materials · doi:10.1021/cm5041997 · Cited by 280
Composition Engineering in Doctor‐Blading of Perovskite Solar Cells
Tang, S., Deng, Y., Zheng, X., Bai, Y., Fang, Y., Dong, Q., Wei, H., & Huang, J. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700302 · Cited by 280
Recent progress on thin-film encapsulation technologies for organic electronic devices
Yu, D., Yang, Y.-Q., Chen, Z., Tao, Y., & Liu, Y.-F. (2016) · Optics Communications · doi:10.1016/j.optcom.2015.08.021 · Cited by 274
Self-citationIonic Liquid Control Crystal Growth to Enhance Planar Perovskite Solar Cells Efficiency
Seo, J., Matsui, T., Luo, J., Correa‐Baena, J., Giordano, F., Saliba, M., Schenk, K., Ummadisingu, A., Domanski, K., Hadadian, M., et al. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201600767 · Cited by 274
Nanostructuring Mixed‐Dimensional Perovskites: A Route Toward Tunable, Efficient Photovoltaics
Koh, T. M., Shanmugam, V., Schlipf, J., Oesinghaus, L., Müller‐Buschbaum, P., Ramakrishnan, N., Swamy, V., Mathews, N., Boix, P. P., & Mhaisalkar, S. G. (2016) · Advanced Materials · doi:10.1002/adma.201506141 · Cited by 271
Recycling Perovskite Solar Cells To Avoid Lead Waste
Binek, A., Petrus, M. L., Huber, N., Bristow, H., Hu, Y., Bein, T., & Docampo, P. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b03767 · Cited by 268
On the Thermal and Thermodynamic (In)Stability of Methylammonium Lead Halide Perovskites
Brunetti, B., Cavallo, C., Ciccioli, A., Gigli, G., & Latini, A. (2016) · Scientific Reports · doi:10.1038/srep31896 · Cited by 268
Zheng, H., Liu, G., Zhu, L., Ye, J., Zhang, X., Alsaedi, A., Hayat, T., Pan, X., & Dai, S. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201800051 · Cited by 265
Chemical Pathways Connecting Lead(II) Iodide and Perovskite via Polymeric Plumbate(II) Fiber
Guo, Y., Shoyama, K., Sato, W., Matsuo, Y., Inoue, K., Harano, K., Liu, C., Tanaka, H., & Nakamura, E. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b10599 · Cited by 264
Jacobsson, T. J., Pazoki, M., Hagfeldt, A., & Edvinsson, T. (2015) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.5b06436 · Cited by 260
Charge collection and pore filling in solid-state dye-sensitized solar cells
Snaith, H. J., Humphry-Baker, R., Chen, P., Cesar, I., Zakeeruddin, S. M., & Grätzel, M. (2008) · Nanotechnology · doi:10.1088/0957-4484/19/42/424003 · Cited by 258
Li, M., Zhao, C., Wang, Z., Zhang, C., Lee, H. K. H., Pockett, A., Barbé, J. M., Tsoi, W. C., Yang, Y., Carnie, M. J., et al. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201801509 · Cited by 258
Self-citationThe Functions of Fullerenes in Hybrid Perovskite Solar Cells
Fang, Y., Bi, C., Wang, D., & Huang, J. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.6b00657 · Cited by 254
Cited by
Caffeine Improves the Performance and Thermal Stability of Perovskite Solar Cells
Wang, R., Xue, J., Meng, L., Lee, J.-W., Zhao, Z., Sun, P., Cai, L., Huang, T., Wang, Z., Wang, Z.-K., et al. (2019) · Joule · doi:10.1016/j.joule.2019.04.005 · Cited by 641
Self-citationJošt, M., Kegelmann, L., Korte, L., & Albrecht, S. (2020) · Advanced Energy Materials · doi:10.1002/aenm.201904102 · Cited by 538
Recent progress of inorganic perovskite solar cells
Tai, Q., Tang, K.-C., & Yan, F. (2019) · Energy & Environmental Science · doi:10.1039/c9ee01479a · Cited by 528
Dunfield, S. P., Bliss, L., Zhang, F., Luther, J. M., Zhu, K., van Hest, M. F. A. M., Reese, M. O., & Berry, J. J. (2020) · Advanced Energy Materials · doi:10.1002/aenm.201904054 · Cited by 435
On-device lead sequestration for perovskite solar cells
Li, X., Zhang, F., He, H., Berry, J. J., Zhu, K., & Xu, T. (2020) · Nature · doi:10.1038/s41586-020-2001-x · Cited by 429
Metadata
- Authors
- Wang, R., Mujahid, M., Duan, Y., Wang, Z., Xue, J., & Yang, Y.
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2019-02-12
- Volume
- 29
- Issue
- 47
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W2913970360
- Cited by
- 1,310
- References
- 290
- FWCI
- 65.65
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.