The DOI matches its Crossref record; 38 of the 38 references it cites were found in a registry or an index.
An Anisotropically High Thermal Conductive Boron Nitride/Epoxy Composite Based on Nacre‐Mimetic 3D Network
Abstract
Polymer‐based thermal interface materials (TIMs) with excellent thermal conductivity and electrical resistivity are in high demand in the electronics industry. In the past decade, thermally conductive fillers, such as boron nitride nanosheets (BNNS), were usually incorporated into the polymer‐based TIMs to improve their thermal conductivity for efficient heat management. However, the thermal performance of those composites means that they are still far from practical applications, mainly because of poor control over the 3D conductive network. In the present work, a high thermally conductive BNNS/epoxy composite is fabricated by building a nacre‐mimetic 3D conductive network within an epoxy resin matrix, realized by a unique bidirectional freezing technique. The as‐prepared composite exhibits a high thermal conductivity (6.07 W m−1 K−1) at 15 vol% BNNS loading, outstanding electrical resistivity, and thermal stability, making it attractive to electronic packaging applications. In addition, this research provides a promising strategy to achieve high thermal conductive polymer‐based TIMs by building efficient 3D conductive networks.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Large Scale Growth and Characterization of Atomic Hexagonal Boron Nitride Layers
Song, L., Ci, L., Lu, H., Sorokin, P. B., Jin, C., Ni, J., Kvashnin, A. G., Kvashnin, D. G., Lou, J., Yakobson, B. I., et al. (2010) · Nano Letters · doi:10.1021/nl1022139 · Cited by 2,689
Emerging challenges and materials for thermal management of electronics
Moore, A. L., & Shi, L. (2014) · Materials Today · doi:10.1016/j.mattod.2014.04.003 · Cited by 2,106
Freezing as a Path to Build Complex Composites
Deville, S., Saiz, E., Nalla, R. K., & Tomsia, A. P. (2006) · Science · doi:10.1126/science.1120937 · Cited by 1,900
Zhi, C., Bando, Y., Tang, C., Kuwahara, H., & Golberg, D. (2009) · Advanced Materials · doi:10.1002/adma.200900323 · Cited by 1,756
Graphene–Multilayer Graphene Nanocomposites as Highly Efficient Thermal Interface Materials
Shahil, K. M. F., & Balandin, A. A. (2012) · Nano Letters · doi:10.1021/nl203906r · Cited by 1,467
Thermal Conductivity of Polymers and Their Nanocomposites
Xu, X., Chen, J., Zhou, J., & Li, B. (2018) · Advanced Materials · doi:10.1002/adma.201705544 · Cited by 808
Chen, J., Huang, X., Zhu, Y., & Jiang, P. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201604754 · Cited by 756
Zeng, X., Yao, Y., Gong, Z., Wang, F., Sun, R., Xu, J., & Wong, C. (2015) · Small · doi:10.1002/smll.201502173 · Cited by 618
Zeng, X., Sun, J., Yao, Y., Sun, R., Xu, J.-B., & Wong, C.-P. (2017) · ACS Nano · doi:10.1021/acsnano.7b02359 · Cited by 523
Hu, J., Huang, Y., Yao, Y., Pan, G., Sun, J., Zeng, X., Sun, R., Xu, J.-B., Song, B., & Wong, C.-P. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b02410 · Cited by 499
Bioinspired large-scale aligned porous materials assembled with dual temperature gradients
Bai, H., Chen, Y., Delattre, B., Tomsia, A. P., & Ritchie, R. O. (2015) · Science Advances · doi:10.1126/sciadv.1500849 · Cited by 483
Self-citationThermal Conduction in Aligned Carbon Nanotube–Polymer Nanocomposites With High Packing Density
Marconnet, A. M., Yamamoto, N., Panzer, M. A., Wardle, B. L., & Goodson, K. E. (2011) · ACS Nano · doi:10.1021/nn200847u · Cited by 474
Lin, Z., Liu, Y., Raghavan, S., Moon, K.-S., Sitaraman, S. K., & Wong, C.-P. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am401939z · Cited by 469
Yuan, C., Duan, B., Li, L., Xie, B., Huang, M., & Luo, X. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b03007 · Cited by 446
High thermal conductivity of chain-oriented amorphous polythiophene
Singh, V., Bougher, T. L., Weathers, A., Cai, Y., Bi, K., Pettes, M. T., McMenamin, S. A., Lv, W., Resler, D. P., Gattuso, T. R., et al. (2014) · Nature Nanotechnology · doi:10.1038/nnano.2014.44 · Cited by 430
Polymer/Boron Nitride Nanocomposite Materials for Superior Thermal Transport Performance
Song, W., Wang, P., Cao, L., Anderson, A., Meziani, M. J., Farr, A. J., & Sun, Y. (2012) · Angewandte Chemie International Edition · doi:10.1002/anie.201201689 · Cited by 411
Bai, H., Walsh, F., Gludovatz, B., Delattre, B., Huang, C., Chen, Y., Tomsia, A. P., & Ritchie, R. O. (2016) · Advanced Materials · doi:10.1002/adma.201504313 · Cited by 410
Self-citationBiomimetic Architectured Graphene Aerogel with Exceptional Strength and Resilience
Yang, M., Zhao, N., Cui, Y., Gao, W., Zhao, Q., Gao, C., Bai, H., & Xie, T. (2017) · ACS Nano · doi:10.1021/acsnano.7b01815 · Cited by 389
Self-citationConstruction of 3D Skeleton for Polymer Composites Achieving a High Thermal Conductivity
Yao, Y., Sun, J., Zeng, X., Sun, R., Xu, J., & Wong, C. (2018) · Small · doi:10.1002/smll.201704044 · Cited by 389
Chen, J., Huang, X., Sun, B., Wang, Y., Zhu, Y., & Jiang, P. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b08061 · Cited by 375
Carbon Nanosheets for Polymeric Nanocomposites with High Thermal Conductivity
Veca, L. M., Meziani, M. J., Wang, W., Wang, X., Lu, F., Zhang, P., Lin, Y., Fee, R., Connell, J. W., & Sun, Y. (2009) · Advanced Materials · doi:10.1002/adma.200802317 · Cited by 355
Ultrahigh Thermal Conductivity of Assembled Aligned Multilayer Graphene/Epoxy Composite
Li, Q., Guo, Y., Li, W., Qiu, S., Zhu, C., Wei, X., Chen, M., Liu, C., Liao, S., Gong, Y., et al. (2014) · Chemistry of Materials · doi:10.1021/cm501473t · Cited by 351
Kargar, F., Barani, Z., Salgado, R., Debnath, B., Lewis, J. S., Aytan, E., Lake, R. K., & Balandin, A. A. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b16616 · Cited by 351
Kuang, Z., Chen, Y., Lu, Y., Liu, L., Hu, S., Wen, S., Mao, Y., & Zhang, L. (2015) · Small · doi:10.1002/smll.201402569 · Cited by 345
Liang, Q., Yao, X., Wang, W., Liu, Y., & Wong, C. P. (2011) · ACS Nano · doi:10.1021/nn200181e · Cited by 320
Bioinspired Engineering of Thermal Materials
Tao, P., Shang, W., Song, C., Shen, Q., Zhang, F., Luo, Z., Yi, N., Zhang, D., & Deng, T. (2015) · Advanced Materials · doi:10.1002/adma.201401449 · Cited by 311
Yao, Y., Zeng, X., Wang, F., Sun, R., Xu, J.-B., & Wong, C.-P. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b04187 · Cited by 279
Suh, D., Moon, C. M., Kim, D., & Baik, S. (2016) · Advanced Materials · doi:10.1002/adma.201600642 · Cited by 278
Wang, F., Zeng, X., Yao, Y., Sun, R., Xu, J., & Wong, C.-P. (2016) · Scientific Reports · doi:10.1038/srep19394 · Cited by 259
Terao, T., Zhi, C., Bando, Y., Mitome, M., Tang, C., & Golberg, D. (2010) · The Journal of Physical Chemistry C · doi:10.1021/jp911431f · Cited by 220
High-Density 3D-Boron Nitride and 3D-Graphene for High-Performance Nano–Thermal Interface Material
Loeblein, M., Tsang, S. H., Pawlik, M., Phua, E. J. R., Yong, H., Zhang, X. W., Gan, C. L., & Teo, E. H. T. (2017) · ACS Nano · doi:10.1021/acsnano.6b08218 · Cited by 200
Zhao, N., Yang, M., Zhao, Q., Gao, W., Xie, T., & Bai, H. (2017) · ACS Nano · doi:10.1021/acsnano.7b01089 · Cited by 193
Self-citationJung, H., Yu, S., Bae, N.-S., Cho, S. M., Kim, R. H., Cho, S. H., Hwang, I., Jeong, B., Ryu, J. S., Hwang, J., et al. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b02681 · Cited by 186
Gu, J., Liang, C., Dang, J., Dong, W., & Zhang, Q. (2016) · RSC Advances · doi:10.1039/c6ra04513h · Cited by 168
Hippalgaonkar, K., Huang, B., Chen, R., Sawyer, K., Ercius, P., & Majumdar, A. (2010) · Nano Letters · doi:10.1021/nl101671r · Cited by 162
Harada, M., Hamaura, N., Ochi, M., & Agari, Y. (2013) · Composites Part B Engineering · doi:10.1016/j.compositesb.2013.06.031 · Cited by 140
Qin, X., Xia, W., Sinko, R., & Keten, S. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b02588 · Cited by 97
Highly deformable thermal interface materials enabled by covalently-bonded carbon nanotubes
Wang, H., Tazebay, A. S., Yang, G. Q., Lin, H. T., Choi, W., & Yu, C. (2016) · Carbon · doi:10.1016/j.carbon.2016.05.017 · Cited by 61
Cited by
Shao, G., Hanaor, D. A. H., Shen, X., & Gurlo, A. (2020) · Advanced Materials · doi:10.1002/adma.201907176 · Cited by 871
Factors affecting thermal conductivities of the polymers and polymer composites: A review
Guo, Y., Ruan, K., Shi, X., Yang, X., & Gu, J. (2020) · Composites Science and Technology · doi:10.1016/j.compscitech.2020.108134 · Cited by 865
Toughness and its mechanisms in epoxy resins
Mi, X., Liang, N., Xu, H., Wu, J., Jiang, Y., Nie, B., & Zhang, D. (2022) · Progress in Materials Science · doi:10.1016/j.pmatsci.2022.100977 · Cited by 683
Zhang, F., Feng, Y., & Feng, W. (2020) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2020.100580 · Cited by 566
Wang, Z., Wu, Z., Weng, L., Ge, S., Jiang, D., Huang, M., Mulvihill, D. M., Chen, Q., Guo, Z., Jazzar, A., et al. (2023) · Advanced Functional Materials · doi:10.1002/adfm.202301549 · Cited by 419
Metadata
- Authors
- Han, J., Du, G., Gao, W., & Bai, H.
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2019-02-06
- Volume
- 29
- Issue
- 13
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W2913506041
- Cited by
- 620
- References
- 38
- FWCI
- 27.88
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.