The DOI matches its Crossref record; 47 of the 47 references it cites were found in a registry or an index.
Stress Controllability in Thermal and Electrical Conductivity of 3D Elastic Graphene‐Crosslinked Carbon Nanotube Sponge/Polyimide Nanocomposite
Abstract
Stress controllability in thermal and electrical conductivity is important for flexible piezoresistive devices. Due to the strength‐elasticity trade‐off, comprehensive investigation of stress‐controllable conduction in elastic high‐modulus polymers is challenging. Here presented is a 3D elastic graphene‐crosslinked carbon nanotube sponge/polyimide (G w‐CNT/PI) nanocomposite. Graphene welding at the junction enables both phonon and electron transfer as well as avoids interfacial slippage during cyclic compression. The uniform G w‐CNT/PI comprising a high‐modulus PI deposited on a porous templated network combines stress‐controllable thermal/electrical conductivity and cyclic elastic deformation. The uniform composites show different variation trends controlled by the porosity due to different phonon and electron conduction mechanisms. A relatively high k (3.24 W m−1 K−1, 1620% higher than PI) and suitable compressibility (16.5% under 1 MPa compression) enables the application of the composite in flexible elastic thermal interface conductors, which is further analyzed by finite element simulations. The interconnected network favors a high stress‐sensitive electrical conductivity (sensitivity, 973% at 9.6% strain). Thus, the G w‐CNT/PI composite can be an important candidate material for piezoresistive sensors upon porosity optimization based on stress‐controllable thermal or electrical conductivity. The results provide insights toward controlling the stress‐induced thermal/electrical conductivities of 3D interconnected templated composite networks for piezoresistive conductors or sensors.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Perspectives on Carbon Nanotubes and Graphene Raman Spectroscopy
Dresselhaus, M. S., Jorio, A., Hofmann, M., Dresselhaus, G., & Saito, R. (2010) · Nano Letters · doi:10.1021/nl904286r · Cited by 3,254
Gui, X., Wei, J., Wang, K., Cao, A., Zhu, H., Jia, Y., Shu, Q., & Wu, D. (2010) · Advanced Materials · doi:10.1002/adma.200902986 · Cited by 1,528
A Rubberlike Stretchable Active Matrix Using Elastic Conductors
Sekitani, T., Noguchi, Y., Hata, K., Fukushima, T., Aida, T., & Someya, T. (2008) · Science · doi:10.1126/science.1160309 · Cited by 1,366
Biomimetic superelastic graphene-based cellular monoliths
Qiu, L., Liu, J. Z., Chang, S. L. Y., Wu, Y., & Li, D. (2012) · Nature Communications · doi:10.1038/ncomms2251 · Cited by 1,250
Multiphase design of autonomic self-healing thermoplastic elastomers
Chen, Y., Kushner, A. M., Williams, G. A., & Guan, Z. (2012) · Nature Chemistry · doi:10.1038/nchem.1314 · Cited by 1,232
Koerner, H., Price, G., Pearce, N. A., Alexander, M., & Vaia, R. A. (2004) · Nature Materials · doi:10.1038/nmat1059 · Cited by 1,034
Interfacial Heat Flow in Carbon Nanotube Suspensions
Huxtable, S. T., Cahill, D. G., Shenogin, S., Xue, L., Ozisik, R., Barone, P., Usrey, M., Strano, M. S., Siddons, G., Shim, M., et al. (2003) · Nature Materials · doi:10.1038/nmat996 · Cited by 1,023
Qin, Y., Peng, Q., Ding, Y., Lin, Z., Wang, C., Li, Y., Xu, F., Li, J., Yuan, Y., He, X., et al. (2015) · ACS Nano · doi:10.1021/acsnano.5b02781 · Cited by 775
Ji, H., Sellan, D. P., Pettes, M. T., Kong, X., Ji, J., Shi, L., & Ruoff, R. S. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee42573h · Cited by 592
Giant-Stroke, Superelastic Carbon Nanotube Aerogel Muscles
Aliev, A. E., Oh, J., Kozlov, M. E., Kuznetsov, A. A., Fang, S., Fonseca, A. F., Ovalle, R., Lima, M. D., Haque, M. H., Gartstein, Y. N., et al. (2009) · Science · doi:10.1126/science.1168312 · Cited by 574
Liu, H., Li, Y., Dai, K., Zheng, G., Liu, C., Shen, C., Yan, X., Guo, J., & Guo, Z. (2016) · Journal of Materials Chemistry C · doi:10.1039/c5tc02751a · Cited by 573
Graphene coating makes carbon nanotube aerogels superelastic and resistant to fatigue
Kim, K. H., Oh, Y., & Islam, M. F. (2012) · Nature Nanotechnology · doi:10.1038/nnano.2012.118 · Cited by 508
Purification and structural annealing of multiwalled carbon nanotubes at graphitization temperatures
Andrews, R., Jacques, D., Qian, D., & Dickey, E. C. (2001) · Carbon · doi:10.1016/s0008-6223(00)00301-8 · Cited by 441
Thermal conductivity and interfacial resistance in single-wall carbon nanotube epoxy composites
Bryning, M. B., Milkie, D. E., Islam, M. F., Kikkawa, J. M., & Yodh, A. G. (2005) · Applied Physics Letters · doi:10.1063/1.2103398 · Cited by 398
Highly Compressible Macroporous Graphene Monoliths via an Improved Hydrothermal Process
Li, Y., Chen, J., Huang, L., Li, C., Hong, J., & Shi, G. (2014) · Advanced Materials · doi:10.1002/adma.201400657 · Cited by 379
Carbon Nanotubes with Temperature-Invariant Viscoelasticity from –196° to 1000°C
Xu, M., Futaba, D. N., Yamada, T., Yumura, M., & Hata, K. (2010) · Science · doi:10.1126/science.1194865 · Cited by 374
Graphene Polyimide Nanocomposites; Thermal, Mechanical, and High-Temperature Shape Memory Effects
Yoonessi, M., Shi, Y., Scheiman, D. A., Lebron-Colon, M., Tigelaar, D. M., Weiss, R. A., & Meador, M. A. (2012) · ACS Nano · doi:10.1021/nn302871y · Cited by 352
Kuang, Z., Chen, Y., Lu, Y., Liu, L., Hu, S., Wen, S., Mao, Y., & Zhang, L. (2015) · Small · doi:10.1002/smll.201402569 · Cited by 345
Turning Carbon Nanotubes from Exceptional Heat Conductors into Insulators
Prasher, R. S., Hu, X. J., Chalopin, Y., Mingo, N., Lofgreen, K., Volz, S., Cleri, F., & Keblinski, P. (2009) · Physical Review Letters · doi:10.1103/physrevlett.102.105901 · Cited by 332
Jiang, X., Bin, Y., & Matsuo, M. (2005) · Polymer · doi:10.1016/j.polymer.2005.05.127 · Cited by 323
Li, P., Yang, Y., Shi, E., Shen, Q., Shang, Y., Wu, S., Wei, J., Wang, K., Zhu, H., Yuan, Q., et al. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am500579c · Cited by 321
Raman 2D-Band Splitting in Graphene: Theory and Experiment
Frank, O., Mohr, M., Maultzsch, J., Thomsen, C., Riaz, I., Jalil, R., Novoselov, K. S., Tsoukleri, G., Parthenios, J., Papagelis, K., et al. (2011) · ACS Nano · doi:10.1021/nn103493g · Cited by 319
Modeling of Thermal Transport in Pillared-Graphene Architectures
Varshney, V., Patnaik, S. S., Roy, A. K., Froudakis, G., & Farmer, B. L. (2010) · ACS Nano · doi:10.1021/nn901341r · Cited by 316
Naturally Dried Graphene Aerogels with Superelasticity and Tunable Poisson's Ratio
Xu, X., Zhang, Q., Yu, Y., Chen, W., Hu, H., & Li, H. (2016) · Advanced Materials · doi:10.1002/adma.201603079 · Cited by 301
99.9% purity multi-walled carbon nanotubes by vacuum high-temperature annealing
Huang, W., Wang, Y., Luo, G., & Wei, F. (2003) · Carbon · doi:10.1016/s0008-6223(03)00330-0 · Cited by 277
Qin, M., Xu, Y., Cao, R., Feng, W., & Chen, L. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201805053 · Cited by 258
Self-citationAn, F., Li, X., Min, P., Liu, P., Jiang, Z.-G., & Yu, Z.-Z. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b04230 · Cited by 250
Lin, Z., Zeng, Z., Gui, X., Tang, Z., Zou, M., & Cao, A. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201600554 · Cited by 243
Luong, N. D., Hippi, U., Korhonen, J. T., Soininen, A. J., Ruokolainen, J., Johansson, L.-S., Nam, J.-D., Sinh, L. H., & Seppälä, J. (2011) · Polymer · doi:10.1016/j.polymer.2011.09.033 · Cited by 237
Samad, Y. A., Li, Y., Schiffer, A., Alhassan, S. M., & Liao, K. (2015) · Small · doi:10.1002/smll.201403532 · Cited by 231
Ha, H. W., Choudhury, A., Kamal, T., Kim, D.-H., & Park, S.-Y. (2012) · ACS Applied Materials & Interfaces · doi:10.1021/am300999g · Cited by 194
Triptycene Polyimides: Soluble Polymers with High Thermal Stability and Low Refractive Indices
Sydlik, S. A., Chen, Z., & Swager, T. M. (2011) · Macromolecules · doi:10.1021/ma101333p · Cited by 178
Liu, J., Liu, Y., Zhang, H.-B., Dai, Y., Liu, Z., & Yu, Z.-Z. (2018) · Carbon · doi:10.1016/j.carbon.2018.02.026 · Cited by 160
Shen, X., Wang, Z., Wu, Y., Liu, X., He, Y.-B., Zheng, Q., Yang, Q.-H., Kang, F., & Kim, J.-K. (2018) · Materials Horizons · doi:10.1039/c7mh00984d · Cited by 159
Ambient pressure dried graphene aerogels with superelasticity and multifunctionality
Yang, H., Zhang, T., Jiang, M. H., Duan, Y., & Zhang, J. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta06452j · Cited by 147
Covalently Bonded Graphene–Carbon Nanotube Hybrid for High‐Performance Thermal Interfaces
Chen, J., Walther, J. H., & Koumoutsakos, P. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201501593 · Cited by 135
Kim, K. H., Oh, Y., & Islam, M. F. (2012) · Advanced Functional Materials · doi:10.1002/adfm.201201055 · Cited by 128
Ji, T., Feng, Y., Qin, M., Li, S., Zhang, F., Lv, F. Z., & Feng, W. (2018) · Carbon · doi:10.1016/j.carbon.2018.02.002 · Cited by 123
Self-citationGas Diffusion, Energy Transport, and Thermal Accommodation in Single‐Walled Carbon Nanotube Aerogels
Schiffres, S. N., Kim, K. H., Hu, L., McGaughey, A. J. H., Islam, M. F., & Malen, J. A. (2012) · Advanced Functional Materials · doi:10.1002/adfm.201201285 · Cited by 109
Toward Macroscale, Isotropic Carbons with Graphene‐Sheet‐Like Electrical and Mechanical Properties
Worsley, M. A., Charnvanichborikarn, S., Montalvo, E., Shin, S. J., Tylski, E. D., Lewicki, J. P., Nelson, A. J., Satcher, J. H., Biener, J., Baumann, T. F., et al. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201400316 · Cited by 99
Elastic improvement of carbon nanotube sponges by depositing amorphous carbon coating
Zhao, W., Li, Y., Wang, S., He, X., Shang, Y., Peng, Q., Wang, C., Du, S., Gui, X., Yang, Y., et al. (2014) · Carbon · doi:10.1016/j.carbon.2014.04.032 · Cited by 93
Li, S., Feng, Y., Li, Y., Feng, W., & Yoshino, K. (2016) · Carbon · doi:10.1016/j.carbon.2016.07.052 · Cited by 76
Self-citationWu, X., Liu, X., Wang, J., Huang, J., & Yang, S. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b12578 · Cited by 52
Enhancement of interfacial thermal transport by carbon nanotube-graphene junction
Bao, H., Shao, C., Luo, S., & Hu, M. (2014) · Journal of Applied Physics · doi:10.1063/1.4864221 · Cited by 51
Cui, Y., & Zhang, M. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta13065g · Cited by 26
Ultrafast Nanoscale Polymer Coating on Porous 3D Structures Using Microwave Irradiation
Choi, W., Choi, K., & Yu, C. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201704877 · Cited by 26
(1999) · doi:10.1002/(sici)1099-0488(19991201)37:23<3359::aid-polb11>3.0.co;2-s
Cited by
Poly(N-isopropylacrylamide)-based smart hydrogels: Design, properties and applications
Tang, L., Wang, L., Yang, X., Feng, Y., Li, Y., & Feng, W. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100702 · Cited by 866
Self-citationFactors affecting thermal conductivities of the polymers and polymer composites: A review
Guo, Y., Ruan, K., Shi, X., Yang, X., & Gu, J. (2020) · Composites Science and Technology · doi:10.1016/j.compscitech.2020.108134 · Cited by 865
Zhang, F., Feng, Y., & Feng, W. (2020) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2020.100580 · Cited by 566
Self-citationRecent Progress in Graphene/Polymer Nanocomposites
Sun, X., Huang, C., Wang, L., Liang, L., Cheng, Y., Fei, W., & Li, Y. (2021) · Advanced Materials · doi:10.1002/adma.202001105 · Cited by 490
3D Printed Flexible Strain Sensors: From Printing to Devices and Signals
Liu, H., Zhang, H., Han, W., Lin, H., Li, R., Zhu, J., & Huang, W. (2021) · Advanced Materials · doi:10.1002/adma.202004782 · Cited by 441
Metadata
- Authors
- Zhang, F., Feng, Y., Qin, M., Gao, L., Li, Z., Zhao, F., Zhang, Z., Lv, F., & Feng, W.
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2019-04-10
- Volume
- 29
- Issue
- 25
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W2939790942
- Cited by
- 308
- References
- 47
- FWCI
- 14.15
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.