The DOI matches its Crossref record; 131 of the 137 references it cites were found in a registry or an index.
Gelatin Methacryloyl Hydrogel, from Standardization, Performance, to Biomedical Application
Abstract
Gelatin methacryloyl (GelMA), a photocurable hydrogel, is widely used in 3D culture, particularly in 3D bioprinting, due to its high biocompatibility, tunable physicochemical properties, and excellent formability. However, as the properties and performances of GelMA vary under different synthetic conditions, there is a lack of standardization, leading to conflicting results. In this study, a uniform standard is established to understand and enhance GelMA applications. First, the basic concept of GelMA and the density of the molecular network (DMN) are defined. Second, two properties, degrees of substitution and ratio of solid content, as the main measurable parameters determining the DMN are used. Third, the mechanisms and relationships between DMN and its performance in various applications in terms of porosity, viscosity, formability, mechanical strength, swelling, biodegradation, and cytocompatibility are theoretically explained. The main questions that are answered: what does performance mean, why is it important, how to optimize the basic parameters to improve the performance, and how to characterize it reasonably and accurately? Finally, it is hoped that this knowledge will eliminate the need for researchers to conduct tedious and repetitive pre-experiments, enable easy communication for achievements between groups under the same standard, and fully explore the potential of the GelMA hydrogel.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“GelMA, a widely utilized hydrogel material, features a three-dimensional architecture that facilitates cell growth and differentiation [56].”
From Hydrogel scaffold encapsulating MSC-Exos and ZIF-8 promotes bone regeneration via coordinating osteogenesis and immunomodulation (2025) · cites this paper as [56]
Citations
Cites
Matrix elasticity directs stem cell lineage specification
Engler, A. J., Sen, S., Sweeney, H. L., & Discher, D. E. (2006) · Cell · doi:10.1016/j.cell.2006.06.044 · Cited by 13,915
Porosity of 3D biomaterial scaffolds and osteogenesis
Karageorgiou, V., & Kaplan, D. L. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2005.02.002 · Cited by 6,639
Neutrophil recruitment and function in health and inflammation
Kolaczkowska, E., & Kubes, P. (2013) · Nature Reviews Immunology · doi:10.1038/nri3399 · Cited by 5,472
Macrophage plasticity, polarization, and function in health and disease
Shapouri‐Moghaddam, A., Mohammadian, S., Vazini, H., Taghadosi, M., Esmaeili, S., Mardani, F., Seifi, B., Mohammadi, A., Afshari, J. T., & Sahebkar, A. (2018) · Journal of Cellular Physiology · doi:10.1002/jcp.26429 · Cited by 4,930
Statistical Mechanics of Cross-Linked Polymer Networks II. Swelling
Flory, P. J., & Rehner, J. (1943) · The Journal of Chemical Physics · doi:10.1063/1.1723792 · Cited by 3,972
Synthesis, properties, and biomedical applications of gelatin methacryloyl (GelMA) hydrogels
Yue, K., Trujillo-de Santiago, G., Alvarez, M. M., Tamayol, A., Annabi, N., & Khademhosseini, A. (2015) · Biomaterials · doi:10.1016/j.biomaterials.2015.08.045 · Cited by 3,146
Cell-laden microengineered gelatin methacrylate hydrogels
Nichol, J. W., Koshy, S. T., Bae, H., Hwang, C. M., Yamanlar, S., & Khademhosseini, A. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.03.064 · Cited by 2,377
Determination of free amino groups in proteins by trinitrobenzenesulfonic acid
Habeeb, A. F. S. A. (1966) · Analytical Biochemistry · doi:10.1016/0003-2697(66)90275-2 · Cited by 2,040
Extracellular-matrix tethering regulates stem-cell fate
Trappmann, B., Gautrot, J. E., Connelly, J. T., Strange, D. G. T., Li, Y., Oyen, M. L., Stuart, M. A. C., Boehm, H., Li, B., Viola Vogel, B., et al. (2012) · Nature Materials · doi:10.1038/nmat3339 · Cited by 1,570
Structural and Rheological Properties of Methacrylamide Modified Gelatin Hydrogels
Van Den Bulcke, A. I., Bogdanov, B., De Rooze, N., Schacht, E. H., Cornelissen, M., & Berghmans, H. (2000) · Biomacromolecules · doi:10.1021/bm990017d · Cited by 1,536
Flagged first, then by citations
6 of the 137 references couldn’t be matched to a known paper.
Research works printed but not linked: 7
- 10.1016/j.addr.2015.11.019 · DOI · Paper page
- 10.1016/j.biomaterials.2015.08.045 · DOI · Paper page
- 10.3390/nano9010120 · DOI
- 10.1007/s42242-020-00096-2 · DOI
- 10.1002/mabi.202000183 · DOI
- 10.1016/j.carbpol.2016.06.098 · DOI
- 10.1021/acsami.7b16059 · DOI
Cited by
Sorted by citations
Items 101–200 of 282
Dynamics of endothelial cells migration in nature-mimicking blood vessels
Du, Y., Xu, X., Yu, S., Wang, Y.-R., Liu, Y., Liu, F., Liu, W., Li, X.-L., Luo, H., Jing, G., et al. (2024) · Talanta · doi:10.1016/j.talanta.2024.126415 · Cited by 11
Sobreiro‐Almeida, R., Santos, S. C., Decarli, M. C., Costa, M., Correia, T. R., Babilotte, J., Custódio, C. A., Moroni, L., & Mano, J. F. (2024) · Advanced Science · doi:10.1002/advs.202406569 · Cited by 12
Zhang, Y., Song, Q., Yang, S., Xiao, J., Wang, F., Fu, C., Xing, X., Wu, J., Zhang, S., Zhu, Y., et al. (2025) · Composites Part B Engineering · doi:10.1016/j.compositesb.2025.112305 · Cited by 11
Xiao, X., Huang, Z., Duan, H., Yang, L., Yang, Y.-C., Lai, Y., Li, C., & Feng, L. (2025) · Biomacromolecules · doi:10.1021/acs.biomac.4c01775 · Cited by 11
Si, Y., Gu, J., Li, M., Dong, S., Zhu, Y., Gao, X., Zhang, X., Yang, Q., Li, X., & Zhang, C. (2025) · Advanced Functional Materials · doi:10.1002/adfm.202527217 · Cited by 10
Pan, Z., Hou, M., Zhang, Y., Liu, Y., Tian, X., Hu, X., Ge, X., Zhao, Z., Liu, T., Xu, Y. X., et al. (2023) · Regenerative Biomaterials · doi:10.1093/rb/rbad074 · Cited by 10
Shi, Y., Gu, J., Zhang, C., Mi, R., Ke, Z., Xie, M., Jin, W., Shao, C., He, Y., Shi, J., et al. (2024) · Small · doi:10.1002/smll.202403835 · Cited by 10
Self-citationHong, G., Zhou, Y., Yang, S., Yan, S., Lu, J., Xu, B., Zhan, Z., Jiang, H.-S., Wei, B., & Wang, J. (2024) · Stem Cells · doi:10.1093/stmcls/sxae057 · Cited by 10
Crystal Transduction 3D Printing of Bio‐Hydrogels with High Fidelity and Order Micro Pores
Han, T., Hu, Y., Wu, J., Wang, R., Wang, J., Cai, X., Chen, X., He, Y., & Wang, S. (2024) · Advanced Functional Materials · doi:10.1002/adfm.202415799 · Cited by 10
Self-citationVillata, S., Baruffaldi, D., Cue-López, R., Paoletti, C., Bosch, P., Napione, L., Giovannozzi, A. M., Pirri, C. F., Martínez‐Campos, E., & Frascella, F. (2024) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.4c16397 · Cited by 10
An, Z., Wang, P., Ling, Z., Bi, K., Wang, Z., Shao, J., Zhao, J., Fu, Z., Huang, M., Wei, W., et al. (2025) · Bioengineering & Translational Medicine · doi:10.1002/btm2.10745 · Cited by 10
A Dual-Factor Scaffold for Spinal Cord Injury Repair Targeting Inflammation and Ferroptosis
Zou, X., Zhu, Y., Shu, H., Su, X., Xiong, J., Wu, Y., Tang, P., Wang, H., Gao, Y., Song, T., et al. (2025) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5c04508 · Cited by 10
Yao, K., Xia, P., Kong, W., Liu, N., Lv, S., Zhang, Y., Yuan, X., He, J., Ouyang, H., & He, Y. (2025) · Advanced Materials · doi:10.1002/adma.202513484 · Cited by 10
Self-citationZhang, F., Ma, B., Li, Q., Zhang, M., & Kou, Y. (2023) · Journal of Functional Biomaterials · doi:10.3390/jfb14090442 · Cited by 10
Cheng, W., Wen, H., Shen, H., Fu, C., Miao, E., Li, D., Chen, X., Hu, C., & Yu, Z. (2024) · Chemical Engineering Journal · doi:10.1016/j.cej.2024.153622 · Cited by 9
Mechanically regulated microcarriers with stem cell loading for skin photoaging therapy
Lin, X. Q., Filppula, A. M., Zhao, Y., Shang, L., & Zhang, H. (2025) · Bioactive Materials · doi:10.1016/j.bioactmat.2024.12.024 · Cited by 9
Santos, D. M. D., Suresh, H., Kruzshak, S. J., Kim, J., Cebe, P., Baleja, J., Tzanakakis, E. S., & Sonkusale, S. (2025) · Advanced Therapeutics · doi:10.1002/adtp.202400521 · Cited by 9
Tang, G., Zeng, T., Wu, H., Qiao, X., Zou, J., Pan, J., Li, B., Xie, Y., Yang, Z., Song, Q., et al. (2025) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2025.144078 · Cited by 9
Recent advances in the use of gelatin as a biomaterial for tissue engineering
Maeso, L., Antezana, P. E., Municoy, S., Zarate, J., Lertxundi, U., Mishra, Y. K., Dolatshahi‐Pirouz, A., Desimone, M. F., & Orive, G. (2026) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2026.126828 · Cited by 9
Direction-oriented fiber guiding with a tunable tri-layer-3D scaffold for periodontal regeneration
Abraham, S., Gupta, P., Govarthanan, K., Rao, S. R., & Santra, T. S. (2024) · RSC Advances · doi:10.1039/d4ra01459f · Cited by 9
Yoo, S., Koh, W., & Lee, H. J. (2025) · Materials · doi:10.3390/ma18040828 · Cited by 8
He, J., Gu, Z., Wei, Q., Zhang, J., Sun, Y., Shao, H., & He, Y. (2025) · Acta Biomaterialia · doi:10.1016/j.actbio.2025.06.025 · Cited by 8
Self-citationLu, Y., Chen, B., Lou, X., Li, Y., Wu, J., Yao, H., & Feng, B. (2025) · Biomacromolecules · doi:10.1021/acs.biomac.5c00479 · Cited by 8
Salunkhe, N. H., Mali, K. K., Sidwadkar, P. H., Pareek, K. M., & Aundhakar, A. S. (2025) · Journal of Drug Delivery Science and Technology · doi:10.1016/j.jddst.2025.107270 · Cited by 8
Mechanical regulation and 3D bioprinting of native tissue-inspired granular composite hydrogels
Deng, H., Fang, Y., Gao, Z., Wu, B., Zhang, T., & Xiong, Z. (2025) · Bio-Design and Manufacturing · doi:10.1631/bdm.2500018 · Cited by 8
Das, S., Bernhardt, A., Gelinsky, M., & Basu, B. (2025) · Bioprinting · doi:10.1016/j.bprint.2025.e00426 · Cited by 8
4D bioprinting of protein-based bioinks for tissue engineering and disease models
Waidi, Y. O., & Gugulothu, S. B. (2025) · Biomaterials Science · doi:10.1039/d5bm01284h · Cited by 8
Vat Photopolymerization of Liquid Metal Nanoparticle‐Integrated Hydrogels
Huang, X., Zhang, L., Nasar, N. K. A., Liu, L., Gu, X., Lin, Y., Davis, T. P., Kalantar‐Zadeh, K., & Qiao, R. (2025) · Advanced Functional Materials · doi:10.1002/adfm.202523767 · Cited by 9
Jiang, S., Cai, B., Ye, C., Wu, K., Liu, K., Xu, P., Liu, F., & Liu, Y. (2025) · Advanced Science · doi:10.1002/advs.202513195 · Cited by 8
Hou, M., Deng, Y., Lv, N., Wu, Y., Zhu, Y., Zhang, Y., Liu, Y., Xia, X., Yu, C., Yu, J., et al. (2024) · Chemical Engineering Journal · doi:10.1016/j.cej.2024.152262 · Cited by 8
Electrostimulation-Based Decellularized Matrix Bladder Patch Promotes Bladder Repair in Rats
Ling, Z., Zhang, H. M., Zhao, J., Wang, P., An, Z., Xiao, S., Sun, Y., & Fu, W. (2024) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.4c00961 · Cited by 7
Self-citationWu, J., Wang, H., Sun, T., Shi, Q., Xie, C., Qi, Y., Tao, S., Zhao, J., & Liu, D. (2025) · Bio-Design and Manufacturing · doi:10.1631/bdm.2400231 · Cited by 7
pH-Triggered antibiotic release from nanofiber–hydrogel hybrid dressings for infected wound healing
Yu, R., Zeng, F., Xiang, Z., Dai, M., He, G., Shi, J., & Shang, J. (2026) · Journal of Materials Chemistry B · doi:10.1039/d5tb01773d · Cited by 7
Ceramic Fillers-Based Polymer Gels for Biomedical Applications
Stocco, T. D., da Silva, A. M. H., Silva, S. G. C. D. P. E., & Lobo, A. O. (2024) · Composites science and technology · doi:10.1007/978-981-97-3909-7_10 · Cited by 7
Wang, L., Wei, L., Wei, J., Zhu, Y., Zhao, H., Zhang, Y., Zhang, S., Zhang, P., Xing, X., Wu, Y., et al. (2025) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2025.141577 · Cited by 7
Xiong, Y., Zou, Z., Li, Y., Li, J., Chen, Y., Shi, W., Liu, X., Guo, R., & Cai, X. (2025) · Biomedical Materials · doi:10.1088/1748-605x/add2bc · Cited by 7
Self-citationSunakawa, Y., Kondo, M., Yamämoto, Y., Inomata, T., Inoue, Y., Mori, D., & Mizuno, T. (2023) · ACS Applied Bio Materials · doi:10.1021/acsabm.3c00684 · Cited by 7
Kumar, S., Malviya, R., & Sundram, S. (2024) · MedComm – Biomaterials and Applications · doi:10.1002/mba2.72 · Cited by 7
Tissue-specific composite hydrogel-loaded BMSCs inhibit apoptosis and promote meniscal repair
Meng, J., Deng, L., Lu, J., Jiang, C., Wang, H., & Yao, J. (2025) · Biomaterials Advances · doi:10.1016/j.bioadv.2025.214258 · Cited by 6
García‐Aponte, O. F., Serra, M., Kahlenberg, S., Subbiahdoss, G., Reimhult, E., Egger, D., & Kasper, C. (2025) · Advanced Healthcare Materials · doi:10.1002/adhm.202405137 · Cited by 6
Tang, S., Huang, J., Du, S., Feng, W., Wang, X., Chen, C., Yang, T., & Ding, G. (2025) · Chemical Engineering Journal · doi:10.1016/j.cej.2025.165993 · Cited by 6
Zhao, S., Li, Y., Dai, L. L., & Cheng, B. (2025) · Chemical Engineering Journal · doi:10.1016/j.cej.2025.168176 · Cited by 6
Recent advances in 3D printing biomimetic gradient scaffolds for tendon-bone interface repair
Zhang, J., Chen, H., Li, X., Zhang, A., Liu, Y., Wang, J., Zhao, X., & Han, Q. (2026) · Materials Today Advances · doi:10.1016/j.mtadv.2026.100699 · Cited by 6
Zhang, S., Du, C., Teng, X., Wang, H., Pan, R., Li, J., Zhang, M., & Zhang, Q. (2026) · Chemical Engineering Journal · doi:10.1016/j.cej.2026.174892 · Cited by 6
Chen, J., Shi, H., Gong, M., Hong, C., Teng, L., Xu, P., Wang, Y., Hu, Z., & Zeng, Z. (2024) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2024.132856 · Cited by 6
Zhou, J., Cui, H., Li, S., Chen, J., & Zhang, Y. (2025) · Macromolecular Bioscience · doi:10.1002/mabi.202400566 · Cited by 6
Cong, Y., Meng, S., Xie, X., Chen, Y., Li, Y., Zhou, Y., Li, W., Zhang, L., Yang, G., Wei, Q., et al. (2025) · Burns & Trauma · doi:10.1093/burnst/tkaf036 · Cited by 5
Self-citationZeng, Q., Xiao, H., Chen, Y., Xiao, Z., Ren, Y., & Liu, Q. (2025) · Journal of Materials Chemistry B · doi:10.1039/d5tb00706b · Cited by 5
Self-citationZhang, Y., Sun, T. S., Cheng, J., Lyu, W., Tang, H., Zhu, Z., Wang, Y., Shen, L., Xie, J., Chen, H., et al. (2025) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5c10673 · Cited by 5
A novel composite polydopamine-based hydrogel dressing that heals diabetic ulcers
Shi, S., Yang, M. J., Jiang, T., Liu, Y., Yang, J., Kalvakolanu, D. V., Tang, J., Zhang, L., Ren, H. J., & Guo, B. (2025) · Materials & Design · doi:10.1016/j.matdes.2025.114810 · Cited by 5
Tao, X., Zhang, H., Peng, M., Huang, J., Fang, B., Huan, Z., & Wu, C. (2025) · International Journal of Oral Science · doi:10.1038/s41368-025-00398-0 · Cited by 5
Nie, X., Wang, L., Xu, Z., Cui, C., Wang, S., Li, F., Dai, Q., & Liu, W. (2025) · Advanced Healthcare Materials · doi:10.1002/adhm.202504578 · Cited by 5
Wang, R., Tong, A., Jin, K., Yu, R., Lin, D., Yang, D., Liu, X., Cui, J., Niu, J., Cui, Y., et al. (2026) · Bioactive Materials · doi:10.1016/j.bioactmat.2026.01.037 · Cited by 5
Guo, R., Xu, J., Xue, P., Qian, G., Chen, C., Min, D., & Lu, M. (2026) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2026.140214 · Cited by 5
Abbas, A., Li, N., Naseer, S., Chen, L., Ai, X., Chen, Y., Gu, C., & Fu, H. (2026) · Gels · doi:10.3390/gels12060456 · Cited by 5
Self-citationXu, Q. F., Bai, Y., Li, S., Hou, W., Hao, Y., Yang, R., Li, X., & Zhang, X. (2024) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2024.1372636 · Cited by 5
Gu, J., Ke, Z., Pan, H., Sarfraz, M. H., Shi, Y., Shi, J., & Xie, Z. (2024) · Applied Materials Today · doi:10.1016/j.apmt.2024.102546 · Cited by 5
Pierre, V., Wu, D. H., Liu, C., Ertugral, E. G., Kothapalli, C. R., & Senyo, S. E. (2025) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2025.1579246 · Cited by 5
Dong, G., Chen, Z., Xia, B., Lv, Y., & Chen, G.-B. (2025) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2025.145525 · Cited by 6
Sustainable biomedical microfibers from natural products
Guo, J., Cao, X., Luo, Z., Zhu, Y., Zhao, Y., & Gu, X. (2024) · Aggregate · doi:10.1002/agt2.549 · Cited by 5
Yang, S., Zhao, Y., Wu, N., Yao, Y., Xu, L., Chen, S., & Tu, Y. (2025) · Food Chemistry X · doi:10.1016/j.fochx.2025.102411 · Cited by 5
Sun, L., Han, W., Ping, Y., Chen, X., Deng, X., Wang, Z., Deng, J., Zhou, J., Wu, T., Zhao, Y., et al. (2026) · Chemical Engineering Journal · doi:10.1016/j.cej.2026.176201 · Cited by 4
Li, N., Yang, M., Feng, M., Xu, X., Li, Y., Zhang, Y., Xian, C. J., Li, T., & Zhai, Y. (2025) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.4c01851 · Cited by 4
Zhao, D., Xu, H., Ye, Z., Yan, J., Yang, H., Wang, Y., & Yin, J. (2025) · Additive manufacturing · doi:10.1016/j.addma.2025.104809 · Cited by 4
Chen, D., Yang, Q., Tang, F., Wang, X., Zhang, H., Sun, X., Wang, X., & Teng, L. (2025) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2025.144658 · Cited by 4
Zhou, X., Yi, Q., & Yang, L. (2025) · Biomedical Materials · doi:10.1088/1748-605x/adde09 · Cited by 4
GelMA@ginsenoside Rb3 Targets Inflammatory Microenvironment in Periodontitis via MAPK Pathway
Sun, J., Sun, M., Li, Z., Liu, L., Liu, X., Sun, Y., & Ding, G. (2025) · Gels · doi:10.3390/gels11080648 · Cited by 3
Self-citationSun, Z., Li, X., Sun, X., Chen, L., Wang, Z., Feng, X., Wang, L., Jin, W., Sun, X., & Lü, J. (2025) · Journal of Biomaterials Science Polymer Edition · doi:10.1080/09205063.2025.2590730 · Cited by 3
Zhang, Q., Zhang, T., He, R., Chen, Y., Wu, J., Ma, B., & Gao, F. (2026) · Materials & Design · doi:10.1016/j.matdes.2026.115939 · Cited by 3
Self-citationNie, X., Hui, J., Han, Z., Wang, H., Zhou, Y., Shao, J., Wang, L., Xu, Z., Wu, B., Cui, C., et al. (2026) · Acta Biomaterialia · doi:10.1016/j.actbio.2026.01.034 · Cited by 3
Moon, S.-H., Kim, S.-C., Kim, N.-G., Heo, S., Heo, S., Park, W. S., Choi, I., Um, W., Lee, S., Lee, B., et al. (2026) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2026.151011 · Cited by 3
Rad, N. I., Stasiak, Z., Klak, M., Wszola, M., & Domański, S. (2026) · Biomacromolecules · doi:10.1021/acs.biomac.5c02257 · Cited by 3
Zhang, X., Zhu, H., Shi, Z., Lu, Y., Chang, M., Li, Y., Zhao, Y., Yang, Y., & Guo, Y. (2026) · Regenerative Biomaterials · doi:10.1093/rb/rbag071 · Cited by 3
Bioresorbable acoustic patch for simultaneous sealing and early detection of gastric leakage
Hu, J., Xu, J., Meng, H., Guan, K., Li, Y., Liu, Z., & Shen, G. (2026) · Science Advances · doi:10.1126/sciadv.aec6857 · Cited by 3
Xie, C., Sun, T., Shimoda, S., Wang, H., Huang, Q., Fukuda, T., & Shi, Q. (2024) · Advanced Science · doi:10.1002/advs.202403622 · Cited by 3
Suppression of FcεRI-evoked Degranulation in RBL-2H3 Cells on Gelatin Methacryloyl Hydrogel
Horisaka, H., Yokawa, S., Suzuki, R., Emoto, R., Maeda, R., & Furuno, T. (2024) · Cell Biochemistry and Biophysics · doi:10.1007/s12013-024-01657-3 · Cited by 3
Jamilludin, M. A., Supii, A. I., Partini, J., Kusindarta, D. L., & Yusuf, Y. (2025) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2025.130798 · Cited by 2
Tang, J., Zuo, Z., Cao, Q., Yao, Y., & Liu, T. (2025) · Macromolecules · doi:10.1021/acs.macromol.4c02647 · Cited by 2
Guo, Y., Tian, R., Chen, Z., Wang, Y., Yu, C., Liu, N., Sun, T., Zhu, S., Liu, T., Yao, B., et al. (2025) · Journal of Biomaterials Science Polymer Edition · doi:10.1080/09205063.2025.2524056 · Cited by 2
Mao, Y., Chen, Y., Fan, R., Zhuang, P., Zhang, H., & Zhou, P. (2025) · Advanced Science · doi:10.1002/advs.202516398 · Cited by 2
Self-citationJeong, M. Y., Kim, H., Park, J. S., Park, C. W., Yang, I. G., Lee, G. Y., Yeo, J. W., Kim, J. S., Kwon, M. K., Shin, Y. B., et al. (2025) · Materials & Design · doi:10.1016/j.matdes.2025.115356 · Cited by 2
Feng, R., Peng, H., Yang, X., Li, L., Yang, S., Lv, W., Wang, G., Wang, Z., Wang, G., Yang, M., et al. (2026) · Advanced Healthcare Materials · doi:10.1002/adhm.202504417 · Cited by 2
Filho, G. P. C., Santos, P. D., Richardson, S. M., Ramos, A. P., & Domingos, M. A. N. (2026) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2026.125092 · Cited by 2
Muzio, L. D., Borrelli, F., Pigliacelli, C., Manetto, S., Ciogli, A., Mazzoccanti, G., Spano, M., Bigi, B., Casadei, M. A., Petralito, S., et al. (2026) · Polymer · doi:10.1016/j.polymer.2026.129781 · Cited by 2
A BioLiving Periosteum Evokes Centripetal Regeneration in Challenging Bone Defects
Shi, Y., Liu, N., Gu, J., Wang, Y., Wang, W., Ke, Z., Xie, M., Jin, W., Kong, W., Shi, J., et al. (2026) · Advanced Science · doi:10.1002/advs.202518401 · Cited by 2
Self-citationMi, D., Liu, T., Zou, L., Wei, Y., Zeng, J., Nie, C., Zeng, Y., Wang, R., Zhao, M., & Shi, S. (2026) · Biomaterials · doi:10.1016/j.biomaterials.2026.124298 · Cited by 2
Chen, S., Zhang, Y., Fu, L., Wang, H., Zhang, C. Q., Yue, X., & Zhang, Z. (2026) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2026.115808 · Cited by 2
Dadheech, R., Manikumar, K., & Mandal, B. B. (2026) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6c00489 · Cited by 2
Zhang, X., Zhu, Q., Rong, H., Zhu, S., Feng, P., Li, J., Wang, Y., Cheng, H., Liu, W., Sun, J., et al. (2026) · Journal of Nanobiotechnology · doi:10.1186/s12951-026-04553-5 · Cited by 2
Yin, P., Wang, X., Liu, S., Huang, Y. Q., Huang, M., Zhang, Y., Peng, R., Sun, J., Wu, Y., & Wang, L. (2026) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6c11606 · Cited by 2
Zhou, Z., Zhang, L., Qin, M., Cui, X., & Wang, D. (2025) · Journal of Applied Polymer Science · doi:10.1002/app.57057 · Cited by 2
Electrohydrodynamic Liquid Bridge Printing of Complex 3D Architectures Using Biopolymeric Inks
Xing, J., Sun, L. G., Wen, X., Wu, X., Wang, P., Wang, C., Geng, Z., & Xing, D. (2025) · Small Methods · doi:10.1002/smtd.202500700 · Cited by 2
3D Printing of Gelatin-Based Hydrogels for Mimicking the Mechanical Properties of Ultrasoft Tissues
Shi, W., Chen, Y., Li, Y., Xie, M., Li, J., Zou, Z., & Liu, X. (2025) · ACS Applied Polymer Materials · doi:10.1021/acsapm.5c00047 · Cited by 1
Self-citationWang, T. T., Zhou, H., He, J., Zheng, Y., Wen, J., Huang, Y., Liu, K., Zhang, Y., & Wang, K. (2025) · MedComm – Biomaterials and Applications · doi:10.1002/mba2.70021 · Cited by 1
Self-citationChen, K., Li, Y., Tang, X., Xu, C., Li, Y., Wu, X., Li, J., Zhang, B., Zhao, J., Fan, T., et al. (2025) · Biofabrication · doi:10.1088/1758-5090/ae175f · Cited by 1
Wang, H., Zhou, Y., Ren, L., Chen, X., Zhuang, Y., Zhao, S., Xu, W., Duan, W., Kong, L., & Yang, H. (2026) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2025.149902 · Cited by 1
Pan, Y., Luo, X., Zhao, R., Zhang, C., Luo, X., Feng, G., & Xiao, D. (2026) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2026.1700858 · Cited by 1
Guo, L., Shen, Y., Yi, J., Li, J., Wang, Z., Gao, E., Zheng, S., Chen, Z., & Tao, B. (2026) · Advanced Science · doi:10.1002/advs.202521174 · Cited by 1
Weekes, A., Stevenson, M., Roany, P. D. G. D., Wen, J., Davern, J. W., & Klein, T. J. (2026) · Bioprinting · doi:10.1016/j.bprint.2026.e00473 · Cited by 1
Ding, R., Wang, Z., Wang, Y., Du, B., Duan, R., Li, X., & Liu, L. (2026) · Biomaterials Science · doi:10.1039/d5bm01628b · Cited by 1
Metadata
- Authors
- He, J., Sun, Y., Gao, Q., He, C., Yao, K., Wang, T., Xie, M., Yu, K., Nie, J., Chen, Y., & He, Y.
- Affiliations
- State Key Laboratory Fluid Power and Mechatronic Systems (CN)
- Dalian Institute of Chemical Physics (CN)
- Zhejiang Provincial People's Hospital (CN)
- State Key Laboratory of Fluid Power and Mechatronic Systems School of Mechanical Engineering Zhejiang University Hangzhou 310027 China
- Corresponding author
- He, Yong
- Venue
- Advanced Healthcare Materials
- Publisher
- Wiley
- Published
- 2023-05-15
- Volume
- 12
- Issue
- 23
- Pages
- e2300395-e2300395
- ISSN
- 2192-2640 (ISSN-L)
- 2192-2659
- OpenAlex
- W4367310714
- Cited by
- 275
- References
- 137
- Citations by year
- 2026: 90 · 2025: 95 · 2024: 74 · 2023: 16
- FWCI
- 23.83
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Advanced Healthcare Materials (publishedVersion)
- PubMed (publishedVersion)
- Funders
- National Key Research and Development Program of China (2018YFA0703000)
- National Natural Science Foundation of China (52235007, U1909218)
- Topics
- Physical Sciences › Materials Science › Biomaterials › Hydrogels: synthesis, properties, applications
- Physical Sciences › Engineering › Biomedical Engineering › 3D Printing in Biomedical Research
- Physical Sciences › Materials Science › Biomaterials › Collagen: Extraction and Characterization
- Keywords
- gelatin methacryloyl, photocurable hydrogel, degree of substitution, porosity, viscosity, formability, mechanical strength, swelling, biodegradation, cytocompatibility, 3D bioprinting, 3D cell culture
- MeSH terms
- Gelatin, Methacrylates, Reference Standards, Hydrogels, Tissue Engineering
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review