Redox‐Based Resistive Switching Memories – Nanoionic Mechanisms, Prospects, and Challenges
The DOI matches its Crossref record; 150 of the 156 references it cites were found in a registry or an index.
Abstract
This review article introduces resistive switching processes that are being considered for nanoelectronic nonvolatile memories. The three main classes are based on an electrochemical metallization mechanism, a valence change mechanism, and a thermochemical mechanism, respectively. The current understanding of the microscopic mechanisms is discussed and the scaling potential is outlined..
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“which was unexpected in theories developed for electrochemical metallization (ECM) memories 1,22 .”
From Observation of conducting filament growth in nanoscale resistive memories (2012) · cites this paper as [22]
In the citing paper
“the cone shape of the filament in Fig. 1b is contrary to what is predicted by the ECM theory 1,22 .”
From Observation of conducting filament growth in nanoscale resistive memories (2012) · cites this paper as [22]
In the citing paper
“This can be explained by the reduction of the Ag cations at the negatively charged inert electrode side during the forming process 1,22 .”
From Observation of conducting filament growth in nanoscale resistive memories (2012) · cites this paper as [22]
In the citing paper
“This initial switching process is normally termed the forming process, and, for MIM devices, corresponds to the dissolution and injection of the active electrode material (for example, Ag) into the dielectric layer and formation of the initial filament 22 .”
From Observation of conducting filament growth in nanoscale resistive memories (2012) · cites this paper as [22]
In the citing paper
“This effect explains the observations in ECM devices that lower threshold voltages are typically required during programming processes, compared with those for the initial forming process 22,27,28 .”
From Observation of conducting filament growth in nanoscale resistive memories (2012) · cites this paper as [22]
6 more claims about this paper
Create a free account to see every claim other papers make about this one.
Citations
Cites
Electrochemical Methods: Fundamentals and Applications
de Rooij, D. M. R. (2003) · Anti-Corrosion Methods and Materials · doi:10.1108/acmm.2003.12850eae.001 · Cited by 13,009
Strukov, D. B., Snider, G. S., Stewart, D. R., & Williams, R. S. (2008) · Nature · doi:10.1038/nature06932 · Cited by 11,828
Memristor—The Missing Circuit Element
Chua, L. (1971) · IEEE Transactions on Circuit Theory · doi:10.1109/tct.1971.1083337 · Cited by 10,268
Nanoionics-based resistive switching memories
Waser, R., & Aono, M. (2007) · Nature Materials · doi:10.1038/nmat2023 · Cited by 4,923
Self-citationPhase-change materials for rewriteable data storage
Wuttig, M., & Yamada, N. (2007) · Nature Materials · doi:10.1038/nmat2009 · Cited by 3,655
Resistive switching in transition metal oxides
Sawa, A. (2008) · Materials Today · doi:10.1016/s1369-7021(08)70119-6 · Cited by 2,948
Memristive devices and systems
Chua, L. O., & Kang, S. M. (1976) · Proceedings of the IEEE · doi:10.1109/proc.1976.10092 · Cited by 2,604
Switching the electrical resistance of individual dislocations in single-crystalline SrTiO3
Szot, K., Speier, W., Bihlmayer, G., & Waser, R. (2006) · Nature Materials · doi:10.1038/nmat1614 · Cited by 1,651
Self-citationElectronic Processes in Ionic Crystals
FRÖHLICH, H. (1949) · Nature · doi:10.1038/164377a0 · Cited by 1,299 · cited 1×
“Assuming that Mzþ is the only mobile ionic species, the ion transport, step (ii), will occur exclusively by migration of these cations in the fixed matrix of the amorphous material and can be described by the model of Mott and Gurney for an electric field driven, thermally activated ion hopping.([35,36]) The driving f…”
BackgroundQuantized conductance atomic switch
Terabe, K., Hasegawa, T., Nakayama, T., & Aono, M. (2005) · Nature · doi:10.1038/nature03190 · Cited by 1,208
Research works printed but not linked: 28
- Waser R., 2008, Nanotechnology
- The International Technology Roadmap for Semiconductors– ITRS 2007 Edition (http://www.itrs.net) 2007.
- Akinaga H., 2007, IEEJ Trans., 2, 453
- Esaki L., 1971, IBM Tech. Discl. Bull., 13, 2161
- Kozicki M. N., 1999, J. Electrochem. Soc., 146, 298
- Kozicki M. N., 2008, Nanotechnology
- C.Schindler M.Meier R.Waser M. N.Kozicki inProc. IEEE Non‐Volatile Memory Technology Symp.2007 p.82.
- M. N.Kozicki M.Balakrishan C.Gopalan C.Ratnakumar M.Mitkova inProc. IEEE Non‐Volatile Memory Technology Symp.2005 p.83.
- Guo X., 2007, Appl. Phys. Lett., 91, 1
- Kozicki M. N., 2004, Proc. IEEE Non‐Volatile Memory Technology Symp, 10
- Ribes M., 2001, J. Optoelectron. Adv. Mater., 3, 665
- Schindler C., Phys. Chem. Chem. Phys.
- K.Campbell inProc. IEEE Non‐Volatile Memory Technology Symp.2006 98.
- Meyer R., 2003, Phys. Rev. Lett., 90, 105901/1
- P. D.Greene E. L.Bush I. R.Rawlings Proc. Symp. Deposited Thin Film Dielectric Materials Montreal1968 167.
- D. S.Jeong Ph. D. Thesis RWTH Aachen 2008.
- Szot K., 2007, Phys. Status Solidi, R86
- R.Waser IEEE Technical Digest International Electron Devices Meeting2008 p.289.
- C.Kuegeler C.Nauenheim M.Meier R.Ruediger R.Waser inProc. IEEE Non‐Volatile Memory Technology Symposium2008 p.59.
- Lidiard A. B., 1957, Handbuch der Physik, 246
- Z.Wei Y.Kanzawa K.Arita Y.Katoh K.Kawai S.Muraoka S.Mitani S.Fujii K.Katayama M.Iijima T.Mikawa T.Ninomiya R.Miyanaga Y.Kawashima K.Tsuji A.Himeno T.Okada R.Azuma K.Shimakawa H.Sugaya T.Takagi R.Yasuhara H.Horiba H.Kumigashira M.Oshima IEEE Technical Digest International Electron Devices Meeting2008 p.293.
- J. G.Baek M. S.Lee S.Seo M. J.Lee D. H.Seo D.‐S.Suh J. C.Park S. O.Park H. S.Kim I. K.Yoo U.‐I.Chung I. T.Moon IEEE Technical Digest International Electron Devices Meeting2004 p.587.
- C.Cagli D.Ielmini F.Nardi A. L.Lacaita IEEE Technical Digest International Electron Devices Meeting 2008 301.
- Schmalzried H., 2004, Festkörperthermodynamik, 122
- R.Yasuhara K.Fujiwara K.Horiba M.Kotsugi F.Guo H.Kumigashira M.Oshima H.Tagaki Workshop on Oxide Electronics WOE15 Estes Park 2008 (Poster).
- 10.1103/physrevb.77.035105 · DOI · Paper page
- M.Kund G.Beitel C. U.Pinnow T.Rohr J.Schumann R.Symanczyk K. D.Ufert G.Muller IEEE Technical Digest International Electron Devices Meeting 2005 p.4.
- R.Symanczyk R.Dittrich J.Keller M.Kund G.Mueller B.Ruf P.‐H.Albarede S.Bournat L.Bouteille A.Duch inProc. IEEE Non‐Volatile Memory Technology Symp.2007 p.70.
Cited by
Items 601–700 of 1,010
Interfacial versus filamentary resistive switching in TiO2 and HfO2 devices
Sassine, G., Barbera, S. L., Najjari, N., Minvielle, M., Dubourdieu, C., & Alibart, F. (2016) · Journal of Vacuum Science & Technology B Nanotechnology and Microelectronics Materials Processing Measurement and Phenomena · doi:10.1116/1.4940129 · Cited by 93
Investigation of the Switching Mechanism in TiO2-Based RRAM: A Two-Dimensional EDX Approach
Carta, D., Salaoru, I., Khiat, A., Regoutz, A., Mitterbauer, C., Harrison, N. M., & Prodromakis, T. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b04919 · Cited by 96
Multilevel resistive switching nonvolatile memory based on MoS 2 nanosheet-embedded graphene oxide
Shin, G. H., Kim, C., Bang, G. S., Kim, J. Y., Jang, B. C., Koo, B. J., Woo, M. H., Choi, Y., & Choi, S. (2016) · 2D Materials · doi:10.1088/2053-1583/3/3/034002 · Cited by 95
Memristive Devices and Networks for Brain‐Inspired Computing
Zhang, T., Ke, Y., Xu, X., Cai, Y., Yang, Y., & Huang, R. (2019) · physica status solidi (RRL) - Rapid Research Letters · doi:10.1002/pssr.201900029 · Cited by 95
Wang, Y., Kang, K.-M., Kim, M., Lee, H., Waser, R. M., Wouters, D. J., Dittmann, R., Yang, J. J., & Park, H. (2019) · Materials Today · doi:10.1016/j.mattod.2019.06.006 · Cited by 96
Self-citationPark, H., Kim, M., Kim, M., & Lee, S. (2020) · Nanoscale · doi:10.1039/d0nr06964g · Cited by 98
Investigation of the electroforming process in resistively switching TiO2 nanocrosspoint junctions
Nauenheim, C., Kuegeler, C., Ruediger, A. P., & Waser, R. M. (2010) · Applied Physics Letters · doi:10.1063/1.3367752 · Cited by 92
Self-citationDefect chemistry and resistance degradation in Fe-doped SrTiO3 single crystal
Wang, J., Huang, H.-B., Bayer, T. J. M., Moballegh, A., Cao, Y., Klein, A., Dickey, E. C., Irving, D. L., Randall, C. A., & Chen, L. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.02.022 · Cited by 92
Computational Study of Oxygen Diffusion along a[100] Dislocations in the Perovskite Oxide SrTiO3
Waldow, S. P., & Souza, R. A. D. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b12574 · Cited by 92
Du, H., Jia, C., Koehl, A., Barthel, J., Dittmann, R., Waser, R. M., & Mayer, J. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b00220 · Cited by 92
Self-citationOrganic nonvolatile memory devices with charge trapping multilayer graphene film
Ji, Y., Choe, M., Cho, B., Song, S., Yoon, J., Ko, H. C., & Lee, T. (2012) · Nanotechnology · doi:10.1088/0957-4484/23/10/105202 · Cited by 91
Singh, B., & Mehta, B. R. (2014) · Thin Solid Films · doi:10.1016/j.tsf.2014.08.030 · Cited by 91
Hsu, C.-W., Wang, Y., Wan, C.-C., Wang, I., Chou, C.-T., Lai, W.-L., Lee, Y., & Hou, T. (2014) · Nanotechnology · doi:10.1088/0957-4484/25/16/165202 · Cited by 91
Resistive switching memory based on organic/inorganic hybrid perovskite materials
Liu, Y., Li, F., Chen, Z., Guo, T., Wu, C., & Kim, T. W. (2016) · Vacuum · doi:10.1016/j.vacuum.2016.05.010 · Cited by 91
Remote control of resistive switching in TiO2 based resistive random access memory device
Sahu, D. P., & Jammalamadaka, S. N. (2017) · Scientific Reports · doi:10.1038/s41598-017-17607-4 · Cited by 91
Memristors for Hardware Security Applications
Pang, Y., Gao, B., Lin, B., Qian, H., & Wu, H. (2019) · Advanced Electronic Materials · doi:10.1002/aelm.201800872 · Cited by 97
Sokolov, A. S., Ali, M., Li, H., Jeon, Y., Ko, M. J., & Choi, C. (2020) · Advanced Electronic Materials · doi:10.1002/aelm.202000866 · Cited by 101
Three‐Dimensional Reconstruction of Conductive Filaments in HfOx‐Based Memristor
Wei, T., Lu, Y., Zhang, F., Tang, J., Gao, B., Yu, P., Qian, H., & Wu, H. (2022) · Advanced Materials · doi:10.1002/adma.202209925 · Cited by 91
Flexible One Diode-One Phase Change Memory Array Enabled by Block Copolymer Self-Assembly
Mun, B. H., You, B. K., Yang, S. R., Yoo, H. G., Kim, J. M., Park, W. I., Yin, Y., Byun, M., Jung, Y. S., & Lee, K. J. (2015) · ACS Nano · doi:10.1021/acsnano.5b00230 · Cited by 91
“resistive switching memory cells used in commercial applications.(54) To improve the resistance ratio of f-BPCMs, it would be effective to increase and optimize Figure 3.”
MethodAlcohol‐Mediated Resistance‐Switching Behavior in Metal–Organic Framework‐Based Electronic Devices
Liu, Y., Wang, H., Shi, W., Zhang, W., Yu, J., Chandran, B. K., Cui, C., Zhu, B., Liu, Z., Li, B., et al. (2016) · Angewandte Chemie International Edition · doi:10.1002/anie.201602499 · Cited by 94
Spectromicroscopy of tantalum oxide memristors
Strachan, J. P., Medeiros-Ribeiro, G., Yang, J. J., Zhang, M.-X., Miao, F., Goldfarb, I., Holt, M., Rose, V., & Williams, R. S. (2011) · Applied Physics Letters · doi:10.1063/1.3599589 · Cited by 90
Fast boolean logic mapped on memristor crossbar
Xie, L., Nguyen, H. A. D., Taouil, M., & Bertels, K. (2015) · IEEE International Conference on Computer Design: VLSI in Computers and Processors (ICCD) · doi:10.1109/iccd.2015.7357122 · Cited by 90
“Memristor Model Although memristors have different physical mechanisms [12,13,27], their circuit-level behaviour can be abstracted by two parameters: switching threshold voltage Vth (with or without a minimum voltage requirement for resistive switching) [28] and resistive switching behaviour (abrupt or smooth) [29].”
BackgroundEmulation of synaptic metaplasticity in memristors
Zhu, X., Du, C., Jeong, Y., & Lu, W. D. (2016) · Nanoscale · doi:10.1039/c6nr08024c · Cited by 90
Organic and perovskite memristors for neuromorphic computing
Park, H., & Lee, T. (2021) · Organic Electronics · doi:10.1016/j.orgel.2021.106301 · Cited by 92
Kim, K. M., Song, S. J., Kim, G. H., Seok, J. Y., Lee, M. H., Yoon, J. H., Park, J., & Hwang, C. S. (2011) · Advanced Functional Materials · doi:10.1002/adfm.201002282 · Cited by 90
A memristor-based nonvolatile latch circuit
Robinett, W., Pickett, M. D., Borghetti, J. L., Xia, Q., Snider, G. S., Medeiros‐Ribeiro, G., & Williams, R. S. (2010) · Nanotechnology · doi:10.1088/0957-4484/21/23/235203 · Cited by 103
“A variety of resistance switching materials could be used for vertically integrated nonvolatile memory cells, including the phase change materials [5, 6], metallic bridge materials [7–9] and metal oxides [10–13].”
BackgroundLogic operations in memory using a memristive Akers array
Levy, Y., Bruck, J., Cassuto, Y., Friedman, E. G., Kolodny, A., Yaakobi, E., & Kvatinsky, S. (2014) · Microelectronics Journal · doi:10.1016/j.mejo.2014.06.006 · Cited by 90
Lee, H., Choi, S. G., Park, H., & Rozenberg, M. J. (2013) · Scientific Reports · doi:10.1038/srep01704 · Cited by 89
Silver Iodide Induced Resistive Switching in CsPbI3 Perovskite‐Based Memory Device
Ge, S., Huang, Y., Chen, X., Zhang, X., Xiang, Z., Zhang, R., Li, W., & Cui, Y. (2019) · Advanced Materials Interfaces · doi:10.1002/admi.201802071 · Cited by 89
Recent progress in artificial synaptic devices: materials, processing and applications
Chen, F., Zhou, Y., Zhu, Y., Zhu, R., Guan, P., Fan, J., Zhou, L., Nagarajan, V., von Wegner, F., Saribatir, E., et al. (2021) · Journal of Materials Chemistry C · doi:10.1039/d1tc01211h · Cited by 92
Novel Electroforming‐Free Nanoscaffold Memristor with Very High Uniformity, Tunability, and Density
Lee, S., Sangle, A. L., Lu, P., Chen, A., Zhang, W., Lee, J. S., Wang, H., Jia, Q. X., & MacManus‐Driscoll, J. L. (2014) · Advanced Materials · doi:10.1002/adma.201401917 · Cited by 89
Nanoscale optoelectronic switches and logic devices
Gawęda, S., Podborska, A., Macyk, W., & Szacilowski, K. T. (2009) · Nanoscale · doi:10.1039/b9nr00145j · Cited by 89
Highly Reproducible and Regulated Conductance Quantization in a Polymer‐Based Atomic Switch
Krishnan, K., Muruganathan, M., Tsuruoka, T., Mizuta, H., & Aono, M. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201605104 · Cited by 89
Impact of the Counter‐Electrode Material on Redox Processes in Resistive Switching Memories
Tappertzhofen, S., Waser, R. M., & Valov, I. (2014) · ChemElectroChem · doi:10.1002/celc.201402106 · Cited by 88
Self-citationJang, M. H., Agarwal, R., Nukala, P., Choi, D., Johnson, A. T. C., Chen, I., & Agarwal, R. (2016) · Nano Letters · doi:10.1021/acs.nanolett.5b02951 · Cited by 88
Kubicek, M., Schmitt, R., Messerschmitt, F., & Rupp, J. L. M. (2015) · ACS Nano · doi:10.1021/acsnano.5b02752 · Cited by 97
“All measured I V curves were highly reproducible already from the first cycles and did not require a forming step, which is sometimes reported in literature.(2,9,40) 42 The reason for thatmight be the low SrTiO3-δ thickness of only 5 nm being ultrathin for a switch and the thereby resulting very high electric fields e…”
BackgroundGiant Electroresistance in Ferroionic Tunnel Junctions
Li, J., Li, N., Ge, C., Huang, H., Sun, Y., Gao, P. D., He, M., Wang, C., Yang, G., & Jin, K. (2019) · iScience · doi:10.1016/j.isci.2019.05.043 · Cited by 88
Weng, T.-F., Ho, M., Sivakumar, C., Balraj, B., & Chung, P.-F. (2020) · Applied Surface Science · doi:10.1016/j.apsusc.2020.147476 · Cited by 88
Design of a Controllable Redox‐Diffusive Threshold Switching Memristor
Sun, Y., Song, C., Yin, S., Qiao, L., Wan, Q., Wang, R., Zeng, F., & Pan, F. (2020) · Advanced Electronic Materials · doi:10.1002/aelm.202000695 · Cited by 87
From Memristive Materials to Neural Networks
Guo, T., Sun, B. T., Ranjan, S., Jiao, Y., Wei, L., Zhou, Y., & Wu, Y. A. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c10796 · Cited by 90
Multistate resistive switching behaviors for neuromorphic computing in memristor
Sun, B. T., Ranjan, S., Zhou, G., Guo, T., Xia, Y., Wei, L., Zhou, Y., & Wu, Y. A. (2020) · Materials Today Advances · doi:10.1016/j.mtadv.2020.100125 · Cited by 88
Multi-neuron connection using multi-terminal floating–gate memristor for unsupervised learning
Won, U. Y., Vu, Q. A., Park, S. B., Park, M. H., Do, V. D., Park, H. J., Yang, H., Lee, Y. H., & Yu, W. J. (2023) · Nature Communications · doi:10.1038/s41467-023-38667-3 · Cited by 88
“Recently, analog memory devices –– i.e., “ memristors (memory + resistor), ” including resistive memory (ReM) 1 – 4 , phase change memory (PCM) 5,6 , and fl oating-gate memory (FGM) 7 – 13 have been proposed to realize functionalities of neurons and synapses.”
BackgroundTossoun, B. M., Liang, D., Cheung, S. S., Fang, Z., Sheng, X., Strachan, J. P., & Beausoleil, R. G. (2024) · Nature Communications · doi:10.1038/s41467-024-44773-7 · Cited by 96
“V/Si memristor-integrated waveguide when the memristor is in the LRS and the HRS. Figure 2d shows the current – voltage characteristics of the device which shows a hysteresis-type curve con fi rming its operation as a memristor.”
InfluentialShao, X. L., Zhou, L., Yoon, K. J., Jiang, H., Zhao, J., Zhang, K., Yoo, S., & Hwang, C. S. (2015) · Nanoscale · doi:10.1039/c4nr06417h · Cited by 88
Current Status of Nonvolatile Semiconductor Memory Technology
Fujisaki, Y. (2010) · Japanese Journal of Applied Physics · doi:10.1143/jjap.49.100001 · Cited by 100
Atomic switch networks—nanoarchitectonic design of a complex system for natural computing
Demis, E. C., Aguilera, R., Sillin, H. O., Scharnhorst, K. S., Sandouk, E. J., Aono, M., Stieg, A. Z., & Gimzewski, J. K. (2015) · Nanotechnology · doi:10.1088/0957-4484/26/20/204003 · Cited by 99
“The atomic switch is a nanoscale resistive switch that exhibits memristive behavior in history-dependent resistance, non linear output response to applied bias, and synaptic properties such a short-and long-term memory [20, 21].”
BackgroundEpitaxial Brownmillerite Oxide Thin Films for Reliable Switching Memory
Acharya, S. K., Nallagatla, V. R., Togibasa, O., Lee, B. W., Liu, C., Jung, C. U., Park, B. H., Park, J., Cho, Y., Kim, D., et al. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b00647 · Cited by 88
Improvement of HfOx-Based RRAM Device Variation by Inserting ALD TiN Buffer Layer
Fang, Y., Yu, Z., Wang, Z., Zhang, T., Yang, Y., Cai, Y., & Huang, R. (2018) · IEEE Electron Device Letters · doi:10.1109/led.2018.2831698 · Cited by 87
Ultrathin Ferroelectric Films: Growth, Characterization, Physics and Applications
Wang, Y., Chen, W., Wang, B., & Zheng, Y. (2014) · Materials · doi:10.3390/ma7096377 · Cited by 87
Performance‐Enhancing Selector via Symmetrical Multilayer Design
Sun, Y., Zhao, X., Song, C., Xu, K., Xi, Y., Yin, J., Wang, Z., Zhou, X., Chen, X., Shi, G., et al. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201808376 · Cited by 89
Lee, S., Park, H., Kim, M., Kang, S., & Lee, S. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b10491 · Cited by 86
Redox-based memristive devices for new computing paradigm
Dittmann, R., & Strachan, J. P. (2019) · APL Materials · doi:10.1063/1.5129101 · Cited by 88
“9 The application of a write pulse (e.g., 3 V) during a nanosecond write time should lead to the switching process, while (in worst case) a constant train of smaller read voltage pulses (e.g., 0.3 V) during the retention time should not change the resistance state of the cell.”
BackgroundInfluentialSelf-citationParamanik, S., Maiti, A., Chatterjee, S., & Pal, A. J. (2021) · Advanced Electronic Materials · doi:10.1002/aelm.202100237 · Cited by 86
Qaid, S. M. H., Murtaza, H., Ain, Q., Ghaithan, H. M., Ahmed, A. A. A., Alkadi, M., & Munir, J. (2023) · Physica B Condensed Matter · doi:10.1016/j.physb.2023.415416 · Cited by 86
Reconfigurable Memristive Device Technologies
Edwards, A. H., Barnaby, H., Campbell, K. A., Kozicki, M. N., Liu, W., & Marinella, M. J. (2015) · Proceedings of the IEEE · doi:10.1109/jproc.2015.2441752 · Cited by 97
A fast and low-power microelectromechanical system-based non-volatile memory device
Lee, S. W., Park, S. J., Campbell, E. E. B., & Park, Y. W. (2011) · Nature Communications · doi:10.1038/ncomms1227 · Cited by 86
Resistance switching memory in perovskite oxides
Yan, Z. B., & Liu, J. (2015) · Annals of Physics · doi:10.1016/j.aop.2015.03.028 · Cited by 86
Chang, Y., Chen, P.-Y., Fowler, B. W., Chen, Y., Xue, F., Wang, Y., Zhou, F., & Lee, J. C. (2012) · Journal of Applied Physics · doi:10.1063/1.4769218 · Cited by 86
Two‐ and Three‐Terminal Resistive Switches: Nanometer‐Scale Memristors and Memistors
Xia, Q., Pickett, M. D., Yang, J. J., Li, X., Wu, W., Medeiros‐Ribeiro, G., & Williams, R. S. (2011) · Advanced Functional Materials · doi:10.1002/adfm.201100180 · Cited by 94
Nanometer‐Scale Phase Transformation Determines Threshold and Memory Switching Mechanism
Chae, B., Seol, J. B., Song, J., Baek, K., Oh, S., Hwang, H., & Park, C. G. (2017) · Advanced Materials · doi:10.1002/adma.201701752 · Cited by 87
Cao, X., Han, Y., Zhou, J., Zuo, W., Gao, X., Han, L., Pang, X., Zhang, L., Liu, Y., & Cao, S. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b12931 · Cited by 86
Interstitial oxygen as a source of p-type conductivity in hexagonal manganites
Skjærvø, S. H., Wefring, E. T., Nesdal, S. K., Gaukås, N. H., Olsen, G. H., Glaum, J., Tybell, T., & Selbach, S. M. (2016) · Nature Communications · doi:10.1038/ncomms13745 · Cited by 85
Echo state graph neural networks with analogue random resistive memory arrays
Wang, S., Li, Y., Wang, D., Zhang, W., Chen, X., Dong, D., Wang, S., Zhang, X., Lin, P., Gallicchio, C., et al. (2023) · Nature Machine Intelligence · doi:10.1038/s42256-023-00609-5 · Cited by 84
Electronic Instabilities Leading to Electroformation of Binary Metal Oxide‐based Resistive Switches
Sharma, A. A., Noman, M., Abdelmoula, M., Skowroński, M., & Bain, J. A. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201400461 · Cited by 84
A Microdot Multilayer Oxide Device: Let Us Tune the Strain-Ionic Transport Interaction
Schweiger, S., Kubicek, M., Messerschmitt, F., Murer, C., & Rupp, J. L. M. (2014) · ACS Nano · doi:10.1021/nn501128y · Cited by 84
A nonvolatile organic resistive switching memory based on lotus leaves
Qi, Y., Sun, B. T., Fu, G., Li, T., Zhu, S., Zheng, L., Mao, S., Kan, X., Lei, M., & Chen, Y. (2018) · Chemical Physics · doi:10.1016/j.chemphys.2018.09.008 · Cited by 84
Forming‐Free Grain Boundary Engineered Hafnium Oxide Resistive Random Access Memory Devices
Petzold, S., Zintler, A., Eilhardt, R., Piros, E., Kaiser, N., Sharath, S. U., Vogel, T., Major, M., McKenna, K. P., Molina‐Luna, L., et al. (2019) · Advanced Electronic Materials · doi:10.1002/aelm.201900484 · Cited by 84
Interface-engineered reliable HfO 2 -based RRAM for synaptic simulation
Wang, Q., Niu, G., Roy, S., Wang, Y., Zhang, Y., Wu, H., Zhai, S., Bai, W., Shi, P., Song, S., et al. (2019) · Journal of Materials Chemistry C · doi:10.1039/c9tc04880d · Cited by 84
Younis, A., Hu, L., Sharma, P. K., Lin, C., Mi, Y., Guan, X., Zhang, D., Wang, Y., He, T., Liu, X., et al. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202002948 · Cited by 84
Power and Energy Perspectives of Nonvolatile Memory Technologies
Derhacobian, N., Hollmer, S., Gilbert, N., & Kozicki, M. N. (2010) · Proceedings of the IEEE · doi:10.1109/jproc.2009.2035147 · Cited by 84
Gao, S., Liu, G., Chen, Q., Xue, W., Yang, H., Shang, J., Chen, B., Zeng, F., Song, C., Pan, F., et al. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b19586 · Cited by 86
Oh, S., Kim, H., Kim, S. E., Kim, M., Park, H., & Lee, S. (2023) · Advanced Intelligent Systems · doi:10.1002/aisy.202200272 · Cited by 84
“Typically, in the ECM memristors, the CF growth and the resultant resistive switching are governed by the voltage conditions (Waser et al., 2009; Valov et al., 2011).”
BackgroundResistive‐Switching Crossbar Memory Based on Ni–NiO Core–Shell Nanowires
Cagli, C., Nardi, F., Harteneck, B. D., Tan, Z., Zhang, Y., & Ielmini, D. (2011) · Small · doi:10.1002/smll.201101157 · Cited by 83
Evidence of soft bound behaviour in analogue memristive devices for neuromorphic computing
Frascaroli, J., Brivio, S., Covi, E., & Spiga, S. (2018) · Scientific Reports · doi:10.1038/s41598-018-25376-x · Cited by 88
“Despite a large literature exists which deals with the switching kinetics of resistive memory devices 31,45–47, 57– 61 , The asymmetric kinetics observed for the potentiation and depression processes can be explained if thermal and electro-chemical effects are considered in the system 31,51 .”
BackgroundInfluence of Dislocations in Transition Metal Oxides on Selected Physical and Chemical Properties
Szot, K., Rodenbücher, C., Bihlmayer, G., Speier, W., Ishikawa, R., Shibata, N., & Ikuhara, Y. (2018) · Crystals · doi:10.3390/cryst8060241 · Cited by 83
“This includes our oxides of choice in this review: TiO2 [48,53], SrTiO3 crystals [50,51,55,68,225,226], and doped SrTiO3 such as Nb:SrTiO3 [227], La:SrTiO3 [228], Fe:SrTiO3 [58], as well as related oxides such as BaTiO3 [229,230], PbZrO3 [231], KTaO3 [232], NaNbO3 [233,234], and BiFeO3 [235].”
BackgroundMethodInfluentialSelf-citationSchmitt, R., Kubicek, M., Sediva, E., Trassin, M., Weber, M. C., Rossi, A. M., Hutter, H., Kreisel, J., Fiebig, M., & Rupp, J. L. M. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201804782 · Cited by 83
Fujii, T., Arita, M., Takahashi, Y., & Fujiwara, I. (2011) · Applied Physics Letters · doi:10.1063/1.3593494 · Cited by 82
Baeumer, C., Raab, N., Menke, T., Schmitz, C., Rosezin, R., Müller, P., Andrä, M., Feyer, V., Bruchhaus, R., Gunkel, F., et al. (2016) · Nanoscale · doi:10.1039/c6nr00824k · Cited by 82
Self-citationObservation of two resistance switching modes in TiO2memristive devices electroformed at low current
Miao, F., Joshua Yang, J., Borghetti, J., Medeiros-Ribeiro, G., & Stanley Williams, R. (2011) · Nanotechnology · doi:10.1088/0957-4484/22/25/254007 · Cited by 79
Pan, T.-M., & Lu, C.-H. (2011) · Applied Physics Letters · doi:10.1063/1.3638490 · Cited by 82
Migration of interfacial oxygen ions modulated resistive switching in oxide-based memory devices
Chen, C., Gao, S., Zeng, F., Tang, G., Li, S. Z., Song, C., Fu, H., & Pan, F. (2013) · Journal of Applied Physics · doi:10.1063/1.4812486 · Cited by 82
Multilevel Cell Storage and Resistance Variability in Resistive Random Access Memory
Prakash, A., & Hwang, H. (2016) · Physical Sciences Reviews · doi:10.1515/psr-2016-0010 · Cited by 86
“The device in which switching occurs due to metallic (Cu or Ag) filament formation is called as conductive bridging random access memory (CBRAM) [14].”
BackgroundMethodUniting Gradual and Abrupt set Processes in Resistive Switching Oxides
Fleck, K., Torre, C. L., Aslam, N., Hoffmann‐Eifert, S., Böttger, U., & Menzel, S. (2016) · Physical Review Applied · doi:10.1103/physrevapplied.6.064015 · Cited by 81
Feedback write scheme for memristive switching devices
Yi, W., Perner, F., Qureshi, M. S., Abdalla, H., Pickett, M. D., Yang, J. J., Zhang, M. M., Medeiros‐Ribeiro, G., & Williams, R. S. (2011) · Applied Physics A · doi:10.1007/s00339-011-6279-2 · Cited by 87
Effects of RRAM Stack Configuration on Forming Voltage and Current Overshoot
Gilmer, D. C., Bersuker, G. I., Park, H.-Y., Park, C., Butcher, B., Wang, W., Kirsch, P. D., & Jammy, R. (2011) · IEEE International Memory Workshop (IMW) · doi:10.1109/imw.2011.5873225 · Cited by 81
Xiao, N., Villena, M. A., Yuan, B., Chen, S., Wang, B., Eliáš, M., Shi, Y., Hui, F., Jing, X., Scheuermann, A. G., et al. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201700384 · Cited by 81
Deep Data Analysis of Conductive Phenomena on Complex Oxide Interfaces: Physics from Data Mining
Strelcov, E., Belianinov, A., Hsieh, Y., Jesse, S., Baddorf, A. P., Chu, Y., & Kalinin, S. V. (2014) · ACS Nano · doi:10.1021/nn502029b · Cited by 80
Resistive switching and synaptic behaviors of an HfO2/Al2O3 stack on ITO for neuromorphic systems
Mahata, C., Lee, C., An, Y., Kim, M., Bang, S., Kim, C. S., Ryu, J., Kim, S., Kim, H., & Park, B. (2020) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2020.154434 · Cited by 80
Development of a rGO-BiVO 4 Heterojunction Humidity Sensor with Boosted Performance
Wu, Z., Sun, X., Guo, X., Ding, Y., Ou, Y., Yang, H. X., Chen, Y., Hu, Y., Kuang, D., Zhao, C., et al. (2021) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.1c05753 · Cited by 80
Raj, V., Aetukuri, N. P. B., & Nanda, J. (2022) · Current Opinion in Solid State and Materials Science · doi:10.1016/j.cossms.2022.100999 · Cited by 80
Memristive devices in computing system: Promises and challenges
Yang, J. J., & Williams, R. S. (2013) · ACM Journal on Emerging Technologies in Computing Systems · doi:10.1145/2463585.2463587 · Cited by 80
Chen, Z., Zhang, Y., Yu, Y., Cao, M., Che, Y., Jin, L., Li, Y., Li, Q., Li, T., Dai, H., et al. (2019) · Applied Physics Letters · doi:10.1063/1.5087594 · Cited by 80
Resistive switching effects in oxide sandwiched structures
Zhu, X., Shang, J., & Li, R. (2012) · Frontiers of Materials Science · doi:10.1007/s11706-012-0170-8 · Cited by 79
“Based on electrochemical metallization (ECM) theory [31], in resistive switching memories with active electrodes (Ag or Cu) as anode and inert electrodes (Pt) as cathode, when a positive bias voltage is applied on the anode, metal atoms will be oxidized to active metal ions at the anode and migrate to the inert cathod…”
BackgroundInfluentialRahmani, M. K., Ismail, M., Mahata, C., & Kim, S. (2020) · Results in Physics · doi:10.1016/j.rinp.2020.103325 · Cited by 80
Kim, H., Kim, M., Lee, A., Park, H., Jang, J., Bae, J., Kang, I. M., Kim, E., & Lee, S. (2023) · Advanced Science · doi:10.1002/advs.202300659 · Cited by 79
Klein, A., Albe, K., Bein, N., Clemens, O., Creutz, K. A., Erhart, P., Frericks, M., Ghorbani, E., Hofmann, J. P., Huang, B., et al. (2023) · Journal of Electroceramics · doi:10.1007/s10832-023-00324-y · Cited by 79
Menke, T., Dittmann, R., Meuffels, P., Szot, K., & Waser, R. M. (2009) · Journal of Applied Physics · doi:10.1063/1.3267485 · Cited by 79
Self-citationWagenaar, J. J. T., Morales‐Masis, M., & van Ruitenbeek, J. M. (2012) · Journal of Applied Physics · doi:10.1063/1.3672824 · Cited by 79
Thermally-stable resistive switching with a large ON/OFF ratio achieved in poly(triphenylamine)
Zhang, W., Wang, C., Liu, G., Zhu, X., Chen, X., Pan, L., Tan, H., Xue, W., Ji, Z., Wang, J., et al. (2014) · Chemical Communications · doi:10.1039/c4cc04696j · Cited by 79
Doping and compensation in Nb-doped anatase and rutile TiO2
Lee, H., & Robertson, J. (2013) · Journal of Applied Physics · doi:10.1063/1.4808475 · Cited by 79
Metadata
- Authors
- Waser, R., Dittmann, R., Staikov, G., & Szot, K.
- Affiliations
- Forschungszentrum Jülich (DE)
- Corresponding author
- Waser, Rainer
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2009-07-06
- Volume
- 21
- Issue
- 25-26
- Pages
- 2632-2663
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2074357625
- Cited by
- 5,080
- References
- 156
- Citations by year
- 2026: 127 · 2025: 182 · 2024: 208 · 2023: 256 · 2022: 276 · 2021: 340 · 2020: 333 · 2019: 352 · 2018: 385 · 2017: 377 · 2016: 427 · 2015: 370 · 2014: 378 · 2013: 378 · 2012: 328
- FWCI
- 12.42
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Advanced Materials (publishedVersion)
- PubMed (publishedVersion)
- JuSER (Forschungszentrum Jülich) (submittedVersion)
- RWTH Publications (RWTH Aachen) (submittedVersion)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advanced Memory and Neural Computing
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Ferroelectric and Negative Capacitance Devices
- Physical Sciences › Materials Science › Materials Chemistry › Phase-change materials and chalcogenides
- Keywords
- resistive switching, non-volatile memory, electrochemical metallization, valence change mechanism, memory scaling
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.