The DOI matches its Crossref record; 35 of the 35 references it cites were found in a registry or an index.
Microfluidics‐Enabled Multimaterial Maskless Stereolithographic Bioprinting
Open accessAbstract
A stereolithography‐based bioprinting platform for multimaterial fabrication of heterogeneous hydrogel constructs is presented. Dynamic patterning by a digital micromirror device, synchronized by a moving stage and a microfluidic device containing four on/off pneumatic valves, is used to create 3D constructs. The novel microfluidic device is capable of fast switching between different (cell‐loaded) hydrogel bioinks, to achieve layer‐by‐layer multimaterial bioprinting. Compared to conventional stereolithography‐based bioprinters, the system provides the unique advantage of multimaterial fabrication capability at high spatial resolution. To demonstrate the multimaterial capacity of this system, a variety of hydrogel constructs are generated, including those based on poly(ethylene glycol) diacrylate (PEGDA) and gelatin methacryloyl (GelMA). The biocompatibility of this system is validated by introducing cell‐laden GelMA into the microfluidic device and fabricating cellularized constructs. A pattern of a PEGDA frame and three different concentrations of GelMA, loaded with vascular endothelial growth factor, are further assessed for its neovascularization potential in a rat model. The proposed system provides a robust platform for bioprinting of high‐fidelity multimaterial microstructures on demand for applications in tissue engineering, regenerative medicine, and biosensing, which are otherwise not readily achievable at high speed with conventional stereolithographic biofabrication platforms.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Angiogenesis in cancer and other diseases
Carmeliet, P., & Jain, R. K. (2000) · Nature · doi:10.1038/35025220 · Cited by 9,070
MCML—Monte Carlo modeling of light transport in multi-layered tissues
Wang, L., Jacques, S. L., & Zheng, L. (1995) · Computer Methods and Programs in Biomedicine · doi:10.1016/0169-2607(95)01640-f · Cited by 3,324
A review on stereolithography and its applications in biomedical engineering
Melchels, F. P. W., Feijen, J., & Grijpma, D. W. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.04.050 · Cited by 2,457
Cell-laden microengineered gelatin methacrylate hydrogels
Nichol, J. W., Koshy, S. T., Bae, H., Hwang, C. M., Yamanlar, S., & Khademhosseini, A. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.03.064 · Cited by 2,377
Self-citationContinuous liquid interface production of 3D objects
Tumbleston, J. R., Shirvanyants, D., Ermoshkin, N., Janusziewicz, R., Johnson, A. R., Kelly, D., Chen, K., Pinschmidt, R., Rolland, J. P., Ermoshkin, A., et al. (2015) · Science · doi:10.1126/science.aaa2397 · Cited by 2,278
Foundations of solid mechanics
Pohle, F. V. (1966) · Journal of the Franklin Institute · doi:10.1016/0016-0032(66)90243-2 · Cited by 1,950
Continuous-flow lithography for high-throughput microparticle synthesis
Dendukuri, D., Pregibon, D. C., Collins, J., Hatton, T. A., & Doyle, P. S. (2006) · Nature Materials · doi:10.1038/nmat1617 · Cited by 1,040
Projection micro-stereolithography using digital micro-mirror dynamic mask
Sun, C., Fang, N., Wu, D. M., & Zhang, X. (2005) · Sensors and Actuators A: Physical · doi:10.1016/j.sna.2004.12.011 · Cited by 880
Deterministically patterned biomimetic human iPSC-derived hepatic model via rapid 3D bioprinting
Ma, X., Qu, X., Zhu, W., Li, Y.-S., Yuan, S., Zhang, H., Liu, J., Wang, P., Lai, C. S. E., Zanella, F., et al. (2016) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1524510113 · Cited by 872
Self-citationLoessner, D., Meinert, C., Kaemmerer, E., Martine, L. C., Yue, K., Levett, P. A., Klein, T. J., Melchels, F. P. W., Khademhosseini, A., & Hutmacher, D. W. (2016) · Nature Protocols · doi:10.1038/nprot.2016.037 · Cited by 868
Self-citation
Cited by
3D printing of hydrogels: Rational design strategies and emerging biomedical applications
Li, J., Wu, C., Chu, P. K., & Gelinsky, M. (2020) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2020.100543 · Cited by 862
Engineered biomaterials for in situ tissue regeneration
Gaharwar, A. K., Singh, I., & Khademhosseini, A. (2020) · Nature Reviews Materials · doi:10.1038/s41578-020-0209-x · Cited by 859
Self-citationA definition of bioinks and their distinction from biomaterial inks
Groll, J., Burdick, J. A., Cho, D.-W., Derby, B., Gelinsky, M., Heilshorn, S. C., Jüngst, T., Malda, J., Mironov, V. A., Nakayama, K., et al. (2018) · Biofabrication · doi:10.1088/1758-5090/aaec52 · Cited by 797
Nazir, A., Gokcekaya, O., Md Masum Billah, K., Ertugrul, O., Jiang, J., Sun, J., & Hussain, S. (2023) · Materials & Design · doi:10.1016/j.matdes.2023.111661 · Cited by 773
Volumetric Bioprinting of Complex Living‐Tissue Constructs within Seconds
Bernal, P. N., Delrot, P., Loterie, D., Li, Y., Malda, J., Moser, C., & Levato, R. (2019) · Advanced Materials · doi:10.1002/adma.201904209 · Cited by 604
Bioinks and bioprinting technologies to make heterogeneous and biomimetic tissue constructs
Ashammakhi, N., Ahadian, S., Xu, C., Montazerian, H., Ko, H., Nasiri, R., Barros, N., & Khademhosseini, A. (2019) · Materials Today Bio · doi:10.1016/j.mtbio.2019.100008 · Cited by 549
Self-citationEnabling Technologies for Personalized and Precision Medicine
Ho, D., Quake, S. R., McCabe, E. R. B., Chng, W. J., Chow, E. K., Ding, X., Gelb, B. D., Ginsburg, G. S., Hassenstab, J., Ho, C.-M., et al. (2020) · Trends in Biotechnology · doi:10.1016/j.tibtech.2019.12.021 · Cited by 517
Development of 3D bioprinting: From printing methods to biomedical applications
Gu, Z., Fu, J., Lin, H., & He, Y. (2020) · Asian Journal of Pharmaceutical Sciences · doi:10.1016/j.ajps.2019.11.003 · Cited by 511
An Introduction to 3D Bioprinting: Possibilities, Challenges and Future Aspects
Kačarević, Ž. P., Rider, P. M., Alkildani, S., Retnasingh, S., Smeets, R., Jung, O., Ivanišević, Z., & Barbeck, M. (2018) · Materials · doi:10.3390/ma11112199 · Cited by 479
From Shape to Function: The Next Step in Bioprinting
Levato, R., Jungst, T., Scheuring, R. G., Blunk, T., Groll, J., & Malda, J. (2020) · Advanced Materials · doi:10.1002/adma.201906423 · Cited by 476
3D Bioprinting: from Benches to Translational Applications
Heinrich, M. A., Liu, W., Jimenez, A., Yang, J., Akpek, A., Liu, X., Pi, Q., Mu, X., Hu, N., Schiffelers, R. M., et al. (2019) · Small · doi:10.1002/smll.201805510 · Cited by 437
Self-citationSun, W., Starly, B., Daly, A. C., Burdick, J. A., Groll, J., Skeldon, G., Shu, W., Sakai, Y., Shinohara, M., Nishikawa, M., et al. (2020) · Biofabrication · doi:10.1088/1758-5090/ab5158 · Cited by 426
Self-citationRecent Advances in Photo-Crosslinkable Hydrogels for Biomedical Applications
Choi, J. R., Yong, K. W., Choi, J. Y., & Cowie, A. C. (2019) · BioTechniques · doi:10.2144/btn-2018-0083 · Cited by 403
Crosslinking Strategies for 3D Bioprinting of Polymeric Hydrogels
GhavamiNejad, A., Ashammakhi, N., Wu, X. Y., & Khademhosseini, A. (2020) · Small · doi:10.1002/smll.202002931 · Cited by 400
Self-citationAqueous Two‐Phase Emulsion Bioink‐Enabled 3D Bioprinting of Porous Hydrogels
Ying, G., Jiang, N., Maharjan, S., Yin, Y., Chai, R., Cao, X., Yang, J., Miri, A. K., Hassan, S., & Zhang, Y. S. (2018) · Advanced Materials · doi:10.1002/adma.201805460 · Cited by 377
Self-citationXiao, S., Zhao, T., Wang, J., Wang, C., Du, J., Ying, L., Lin, J., Zhang, C., Hu, W., Wang, L., et al. (2019) · Stem Cell Reviews and Reports · doi:10.1007/s12015-019-09893-4 · Cited by 363
Materials for Smart Soft Actuator Systems
Apsite, I., Salehi, S., & Ionov, L. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00453 · Cited by 357
Daly, A. C., Prendergast, M. E., Hughes, A. J., & Burdick, J. A. (2021) · Cell · doi:10.1016/j.cell.2020.12.002 · Cited by 332
Biodegradable Polymers as the Pivotal Player in the Design of Tissue Engineering Scaffolds
Zhang, F., & King, M. W. (2020) · Advanced Healthcare Materials · doi:10.1002/adhm.201901358 · Cited by 309
Biomedical applications of gelatin methacryloyl hydrogels
Piao, Y., You, H., Xu, T., Bei, H.-P., Piwko, I. Z., Kwan, Y. Y., & Zhao, X. (2021) · Engineered Regeneration · doi:10.1016/j.engreg.2021.03.002 · Cited by 295
Advances and Future Perspectives in 4D Bioprinting
Ashammakhi, N., Ahadian, S., Zengjie, F., Suthiwanich, K., Lorestani, F., Orive, G., Ostrovidov, S., & Khademhosseini, A. (2018) · Biotechnology Journal · doi:10.1002/biot.201800148 · Cited by 270
Self-citation3D Bioprinted in vitro metastatic models via reconstruction of tumor microenvironments
Meng, F., Meyer, C. M., Joung, D., Vallera, D. A., McAlpine, M. C., & Panoskaltsis‐Mortari, A. (2019) · Advanced Materials · doi:10.1002/adma.201806899 · Cited by 262
Multiscale bioprinting of vascularized models
Miri, A. K., Khalilpour, A., Cecen, B., Maharjan, S., Shin, S. R., & Khademhosseini, A. (2019) · Biomaterials · doi:10.1016/j.biomaterials.2018.08.006 · Cited by 267
Self-citationRecent advances in multi-material additive manufacturing: methods and applications
Han, D., & Lee, H. (2020) · Current Opinion in Chemical Engineering · doi:10.1016/j.coche.2020.03.004 · Cited by 266
Emerging Technologies in Multi‐Material Bioprinting
Ravanbakhsh, H., Karamzadeh, V., Bao, G., Mongeau, L., Juncker, D., & Zhang, Y. S. (2021) · Advanced Materials · doi:10.1002/adma.202104730 · Cited by 266
Self-citationNanomaterial Patterning in 3D Printing
Elder, B., Neupane, R., Tokita, E., Ghosh, U., Hales, S., & Kong, Y. L. (2020) · Advanced Materials · doi:10.1002/adma.201907142 · Cited by 265
Three-dimensional in vitro culture models in oncology research
Jubelin, C., Muñoz-Garcia, J., Griscom, L., Cochonneau, D., Ollivier, E., Heymann, M.-F., Vallette, F. M., Oliver, L., & Heymann, D. (2022) · Cell & Bioscience · doi:10.1186/s13578-022-00887-3 · Cited by 264
Clickable PEG hydrogel microspheres as building blocks for 3D bioprinting
Xin, S., Chimene, D., Garza, J. E., Gaharwar, A. K., & Alge, D. L. (2019) · Biomaterials Science · doi:10.1039/c8bm01286e · Cited by 263
Digital Light Processing Based Bioprinting with Composable Gradients
Wang, M., Li, W., Mille, L. S., Ching, T., Luo, Z., Tang, G., Garciamendez, C. E., Lesha, A., Hashimoto, M., & Zhang, Y. S. (2022) · Advanced Materials · doi:10.1002/adma.202107038 · Cited by 206
Self-citationHydrogels as artificial matrices for cell seeding in microfluidic devices
Akther, F., Little, P., Li, Z., Nguyen, N.-T., & Ta, H. T. (2020) · RSC Advances · doi:10.1039/d0ra08566a · Cited by 127
In Vitro Strategies to Vascularize 3D Physiologically Relevant Models
Dellaquila, A., Le Bao, C., Letourneur, D., & Simon‐Yarza, T. (2021) · Advanced Science · doi:10.1002/advs.202100798 · Cited by 115
Hakim Khalili, M., Zhang, R., Wilson, S., Goel, S., Impey, S. A., & Aria, A. I. (2023) · Polymers · doi:10.3390/polym15102341 · Cited by 114
Bioengineering approaches to treat the failing heart: from cell biology to 3D printing
Yadid, M., Oved, H., Silberman, E., & Dvir, T. (2022) · Nature Reviews Cardiology · doi:10.1038/s41569-021-00603-7 · Cited by 83
A handheld bioprinter for multi-material printing of complex constructs
Pagan, E., Stefanek, E., Seyfoori, A., Razzaghi, M., Chehri, B., Mousavi, A., Arnaldi, P., Ajji, Z., Dartora, D. R., Dabiri, S. M. H., et al. (2023) · Biofabrication · doi:10.1088/1758-5090/acc42c · Cited by 43
Self-citationFang, Y., Sun, W., Zhang, T., & Xiong, Z. (2022) · Biomaterials · doi:10.1016/j.biomaterials.2021.121298 · Cited by 40
Metadata
- Authors
- Miri, A. K., Nieto, D., Iglesias, L., Goodarzi Hosseinabadi, H., Maharjan, S., Ruiz‐Esparza, G. U., Khoshakhlagh, P., Manbachi, A., Dokmeci, M. R., Chen, S., Shin, S. R., Zhang, Y. S., & Khademhosseini, A.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2018-05-07
- Volume
- 30
- Issue
- 27
- Pages
- e1800242-e1800242
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2801546204
- Cited by
- 431
- References
- 35
- FWCI
- 19.91
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.