The DOI matches its Crossref record; 37 of the 37 references it cites were found in a registry or an index.
Rational Design and General Synthesis of S‐Doped Hard Carbon with Tunable Doping Sites toward Excellent Na‐Ion Storage Performance
Abstract
Heteroatom‐doping is a promising strategy to tuning the microstructure of carbon material toward improved electrochemical storage performance. However, it is a big challenge to control the doping sites for heteroatom‐doping and the rational design of doping is urgently needed. Herein, S doping sites and the influence of interlayer spacing for two kinds of hard carbon, perfect structure and vacancy defect structure, are explored by the first‐principles method. S prefers doping in the interlayer for the former with interlayer distance of 3.997 Å, while S is doped on the carbon layer for the latter with interlayer distance of 3.695 Å. More importantly, one step molten salts method is developed as a universal synthetic strategy to fabricate hard carbon with tunable microstructure. It is demonstrated by the experimental results that S‐doping hard carbon with fewer pores exhibits a larger interlayer spacing than that of porous carbon, agreeing well with the theoretical prediction. Furthermore, the S‐doping carbon with larger interlayer distance and fewer pores exhibits remarkably large reversible capacity, excellent rate performance, and long‐term cycling stability for Na‐ion storage. A stable and reversible capacity of ≈200 mAh g−1 is steadily kept even after 4000 cycles at 1 A g−1.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Electrical energy storage for the grid: A battery of choices
Dunn, B., Kamath, H., & Tarascon, J.-M. (2011) · Science · doi:10.1126/science.1212741 · Cited by 15,072
Towards greener and more sustainable batteries for electrical energy storage
Larcher, D., & Tarascon, J.-M. (2015) · Nature Chemistry · doi:10.1038/nchem.2085 · Cited by 7,872
Research Development on Sodium-Ion Batteries
Yabuuchi, N., Kubota, K., Dahbi, M., & Komaba, S. (2014) · Chemical Reviews · doi:10.1021/cr500192f · Cited by 6,478
Sodium-ion batteries: present and future
Hwang, J.-Y., Myung, S.-T., & Sun, Y.-K. (2017) · Chemical Society Reviews · doi:10.1039/c6cs00776g · Cited by 5,305
Perspectives on Carbon Nanotubes and Graphene Raman Spectroscopy
Dresselhaus, M. S., Jorio, A., Hofmann, M., Dresselhaus, G., & Saito, R. (2010) · Nano Letters · doi:10.1021/nl904286r · Cited by 3,254
Komaba, S., Murata, W., Ishikawa, T., Yabuuchi, N., Ozeki, T., Nakayama, T., Ogata, A., Gotoh, K., & Fujiwara, K. (2011) · Advanced Functional Materials · doi:10.1002/adfm.201100854 · Cited by 2,116
The Emerging Chemistry of Sodium Ion Batteries for Electrochemical Energy Storage
Kundu, D., Talaie, E., Duffort, V., & Nazar, L. F. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201410376 · Cited by 2,068
Sodium Ion Insertion in Hollow Carbon Nanowires for Battery Applications
Cao, Y., Xiao, L., Sushko, M. L., Wang, W., Schwenzer, B., Xiao, J., Nie, Z., Saraf, L. V., Yang, Z., & Liu, J. (2012) · Nano Letters · doi:10.1021/nl3016957 · Cited by 1,929
Expanded graphite as superior anode for sodium-ion batteries
Wen, Y., He, K., Zhu, Y., Han, F., Xu, Y., Matsuda, I., Ishii, Y., Cumings, J., & Wang, C. (2014) · Nature Communications · doi:10.1038/ncomms5033 · Cited by 1,894
The Mechanisms of Lithium and Sodium Insertion in Carbon Materials
Stevens, D. A., & Dahn, J. R. (2001) · Journal of The Electrochemical Society · doi:10.1149/1.1379565 · Cited by 1,499
Na-Ion Battery Anodes: Materials and Electrochemistry
Luo, W., Shen, F., Bommier, C., Zhu, H., Ji, X., & Hu, L. (2016) · Accounts of Chemical Research · doi:10.1021/acs.accounts.5b00482 · Cited by 1,081
Li, Y., Hu, Y., Titirici, M., Chen, L., & Huang, X. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201600659 · Cited by 998
Jache, B., & Adelhelm, P. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201403734 · Cited by 963
Yang, J., Zhou, X., Wu, D., Zhao, X., & Zhou, Z. (2017) · Advanced Materials · doi:10.1002/adma.201604108 · Cited by 755
A high performance sulfur-doped disordered carbon anode for sodium ion batteries
Li, W., Zhou, M., Li, H., Wang, K., Cheng, S., & Jiang, K. (2015) · Energy & Environmental Science · doi:10.1039/c5ee01985k · Cited by 641
Liu, Y., Zhang, N., Jiao, L., & Chen, J. (2015) · Advanced Materials · doi:10.1002/adma.201503015 · Cited by 612
Huang, S., Li, Z., Wang, B., Zhang, J., Peng, Z., Qi, R., Wang, J., & Zhao, Y. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201706294 · Cited by 585
Self-citationPei, F., An, T., Zang, J., Zhao, X., Fang, X., Zheng, M., Dong, Q., & Zheng, N. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201502539 · Cited by 555
Xu, D., Chen, C., Xie, J., Zhang, B., Miao, L., Cai, J., Huang, Y., & Zhang, L. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201501929 · Cited by 552
Li, W., Hu, S., Luo, X., Li, Z., Sun, X., Li, M., Liu, F., & Yu, Y. (2017) · Advanced Materials · doi:10.1002/adma.201605820 · Cited by 536
He, J., Wang, N., Cui, Z., Du, H., Fu, L., Huang, C., Yang, Z., Shen, X., Yi, Y., Tu, Z., et al. (2017) · Nature Communications · doi:10.1038/s41467-017-01202-2 · Cited by 479
A superior low-cost amorphous carbon anode made from pitch and lignin for sodium-ion batteries
Li, Y., Hu, Y., Li, H., Chen, L., & Huang, X. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta08601a · Cited by 447
Xia, Q., Yang, H., Wang, M., Yang, M., Guo, Q., Wan, L., Xia, H., & Yu, Y. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201701336 · Cited by 423
Hard carbon nanoparticles as high-capacity, high-stability anodic materials for Na-ion batteries
Xiao, L., Cao, Y., Henderson, W. A., Sushko, M. L., Shao, Y., Xiao, J., Wang, W., Engelhard, M. H., Nie, Z., & Liu, J. (2016) · Nano Energy · doi:10.1016/j.nanoen.2015.10.034 · Cited by 415
Xie, Y., Chen, Y., Liu, L., Tao, P., Fan, M., Xu, N., Shen, X., & Yan, C. (2017) · Advanced Materials · doi:10.1002/adma.201702268 · Cited by 405
3D Porous γ‐Fe2O3@C Nanocomposite as High‐Performance Anode Material of Na‐Ion Batteries
Zhang, N., Han, X., Liu, Y., Hu, X., Zhao, Q., & Chen, J. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201401123 · Cited by 356
Muñoz‐Márquez, M. Á., Saurel, D., Gómez‐Cámer, J. L., Casas‐Cabanas, M., Castillo‐Martínez, E., & Rojo, T. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700463 · Cited by 338
Liu, X., & Antonietti, M. (2013) · Advanced Materials · doi:10.1002/adma.201302034 · Cited by 269
Low-Potential Sodium Insertion in a NASICON-Type Structure through the Ti(III)/Ti(II) Redox Couple
Senguttuvan, P., Rousse, G., Arroyo y de Dompablo, M. E., Vezin, H., Tarascon, J.-M., & Palacín, M. R. (2013) · Journal of the American Chemical Society · doi:10.1021/ja311044t · Cited by 252
Tuning the Solid Electrolyte Interphase for Selective Li‐ and Na‐Ion Storage in Hard Carbon
Soto, F. A., Yan, P., Engelhard, M. H., Marzouk, A., Wang, C., Xu, G., Chen, Z., Amine, K., Liu, J., Sprenkle, V. L., et al. (2017) · Advanced Materials · doi:10.1002/adma.201606860 · Cited by 234
Extraordinary Performance of Carbon‐Coated Anatase TiO2 as Sodium‐Ion Anode
Tahir, M. N., Oschmann, B., Buchholz, D., Dou, X., Lieberwirth, I., Panthöfer, M., Tremel, W., Zentel, R., & Passerini, S. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201501489 · Cited by 222
Flexible Electrodes for Sodium‐Ion Batteries: Recent Progress and Perspectives
Wang, H., Li, W., Liu, D., Feng, X., Wang, J., Yang, X., Zhang, X., Zhu, Y., & Zhang, Y. (2017) · Advanced Materials · doi:10.1002/adma.201703012 · Cited by 212
He, P., Fang, Y., Yu, X., & Lou, X. W. (. (2017) · Angewandte Chemie International Edition · doi:10.1002/anie.201706652 · Cited by 211
“Protrusions” or “holes” in graphene: which is the better choice for sodium ion storage?
Yang, Y., Tang, D.-M., Zhang, C., Zhang, Y., Liang, Q., Chen, S., Weng, Q., Zhou, M., Xue, Y., Liu, J., et al. (2017) · Energy & Environmental Science · doi:10.1039/c7ee00329c · Cited by 209
Wang, M., Yang, Y., Yang, Z., Gu, L., Chen, Q., & Yu, Y. (2017) · Advanced Science · doi:10.1002/advs.201600468 · Cited by 206
Zou, G., Wang, C., Hou, H., Wang, C., Qiu, X., & Ji, X. (2017) · Small · doi:10.1002/smll.201700762 · Cited by 175
Alkaline earth metal vanadates as sodium-ion battery anodes
Xu, X., Niu, C., Duan, M., Wang, X., Huang, L., Wang, J., Pu, L., Ren, W., Shi, C., Meng, J., et al. (2017) · Nature Communications · doi:10.1038/s41467-017-00211-5 · Cited by 163
Cited by
Heteroatom Doping: An Effective Way to Boost Sodium Ion Storage
Li, Y., Chen, M., Liu, B., Zhang, Y., Liang, X., & Xia, X. (2020) · Advanced Energy Materials · doi:10.1002/aenm.202000927 · Cited by 621
Understanding of the sodium storage mechanism in hard carbon anodes
Chen, X., Liu, C., Fang, Y., Ai, X., Zhong, F., Yang, H., & Cao, Y. (2022) · Carbon Energy · doi:10.1002/cey2.196 · Cited by 527
Zhang, M., Li, Y., Wu, F., Bai, Y., & Wu, C. (2021) · Nano Energy · doi:10.1016/j.nanoen.2020.105738 · Cited by 412
He, H., Huang, D., Tang, Y., Wang, Q., Ji, X., Wang, H., & Guo, Z. (2019) · Nano Energy · doi:10.1016/j.nanoen.2019.01.009 · Cited by 401
Sun, F., Wang, H., Qu, Z., Wang, K., Wang, L., Gao, J., Gao, J., Liu, S., & Lu, Y. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202002981 · Cited by 390
Metadata
- Authors
- Hong, Z., Zhen, Y., Ruan, Y., Kang, M., Zhou, K., Zhang, J., Huang, Z., & Wei, M.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2018-05-28
- Volume
- 30
- Issue
- 29
- Pages
- e1802035-e1802035
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2805553705
- Cited by
- 396
- References
- 37
- FWCI
- 12.51
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.