The DOI matches its Crossref record; 42 of the 42 references it cites were found in a registry or an index.
An Armored Mixed Conductor Interphase on a Dendrite‐Free Lithium‐Metal Anode
Abstract
Lithium‐metal electrodes have undergone a comprehensive renaissance to meet the requirements of high‐energy‐density batteries due to their lowest electrode potential and the very high theoretical capacity. Unfortunately, the unstable interface between lithium and nonaqueous electrolyte induces dendritic Li and low Coulombic efficiency during repeated Li plating/stripping, which is one of the huge obstacles toward practical lithium‐metal batteries. Here, a composite mixed ionic/electronic conductor interphase (MCI) is formed on the surface of Li by in situ chemical reactions of a copper‐fluoride‐based solution and Li metal at room temperature. The as‐obtained MCI film acts like the armor of a soldier to protect the Li‐metal anode by its prioritized lithium storage, high ionic conductivity, and high Young's modulus. The armored MCI can effectively suppress Li‐dendrite growth and work effectively in LiNi 0.5 Co 0.2 Mn 0.3 O 2/Li cells. The armored MCI presents fresh insights into the formation and regulation of the stable electrode–electrolyte interface and an effective strategy to protect Li‐metal anodes in working Li‐metal batteries.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Reviving the lithium metal anode for high-energy batteries
Lin, D., Liu, Y., & Cui, Y. (2017) · Nature Nanotechnology · doi:10.1038/nnano.2017.16 · Cited by 6,763
Toward Safe Lithium Metal Anode in Rechargeable Batteries: A Review
Cheng, X.-B., Zhang, R., Zhao, C.-Z., & Zhang, Q. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00115 · Cited by 6,197
Self-citationPeled, E. (1979) · Journal of The Electrochemical Society · doi:10.1149/1.2128859 · Cited by 2,899
Dendrite-Free Lithium Deposition via Self-Healing Electrostatic Shield Mechanism
Ding, F., Xu, W., Graff, G. L., Zhang, J., Sushko, M. L., Chen, X., Shao, Y., Engelhard, M. H., Nie, Z., Xiao, J., et al. (2013) · Journal of the American Chemical Society · doi:10.1021/ja312241y · Cited by 2,107
Negating interfacial impedance in garnet-based solid-state Li metal batteries
Han, X., Gong, Y., Fu, K., He, X., Hitz, G. T., Dai, J., Pearse, A., Liu, B., Wang, H., Rubloff, G., et al. (2017) · Nature Materials · doi:10.1038/nmat4821 · Cited by 2,025
More Reliable Lithium‐Sulfur Batteries: Status, Solutions and Prospects
Fang, R., Zhao, S., Sun, Z., Wang, D., Cheng, H., & Li, F. (2017) · Advanced Materials · doi:10.1002/adma.201606823 · Cited by 1,785
Design principles for electrolytes and interfaces for stable lithium-metal batteries
Tikekar, M. D., Choudhury, S., Tu, Z., & Archer, L. A. (2016) · Nature Energy · doi:10.1038/nenergy.2016.114 · Cited by 1,765
The Impact of Elastic Deformation on Deposition Kinetics at Lithium/Polymer Interfaces
Monroe, C., & Newman, J. (2005) · Journal of The Electrochemical Society · doi:10.1149/1.1850854 · Cited by 1,701
Stable lithium electrodeposition in liquid and nanoporous solid electrolytes
Lu, Y., Tu, Z., & Archer, L. A. (2014) · Nature Materials · doi:10.1038/nmat4041 · Cited by 1,592
An Artificial Solid Electrolyte Interphase Layer for Stable Lithium Metal Anodes
Li, N., Yin, Y., Yang, C., & Guo, Y. (2016) · Advanced Materials · doi:10.1002/adma.201504526 · Cited by 1,577
The synergetic effect of lithium polysulfide and lithium nitrate to prevent lithium dendrite growth
Li, W., Yao, H., Yan, K., Zheng, G., Liang, Z., Chiang, Y.-M., & Cui, Y. (2015) · Nature Communications · doi:10.1038/ncomms8436 · Cited by 1,540
Self-citationYamada, Y., Furukawa, K., Sodeyama, K., Kikuchi, K., Yaegashi, M., Tateyama, Y., & Yamada, A. (2014) · Journal of the American Chemical Society · doi:10.1021/ja412807w · Cited by 1,525
On the Surface Chemical Aspects of Very High Energy Density, Rechargeable Li–Sulfur Batteries
Aurbach, D., Pollak, E., Elazari, R., Salitra, G., Kelley, C. S., & Affinito, J. (2009) · Journal of The Electrochemical Society · doi:10.1149/1.3148721 · Cited by 1,443
Electrolyte additive enabled fast charging and stable cycling lithium metal batteries
Zheng, J., Engelhard, M. H., Mei, D., Jiao, S., Polzin, B. J., Zhang, J.-G., & Xu, W. (2017) · Nature Energy · doi:10.1038/nenergy.2017.12 · Cited by 1,343
On the use of vinylene carbonate (VC) as an additive to electrolyte solutions for Li-ion batteries
Aurbach, D., Gamolsky, K., Markovsky, B., Gofer, Y., Schmidt, M., & Heider, U. (2002) · Electrochimica Acta · doi:10.1016/s0013-4686(01)00858-1 · Cited by 992
Liu, Y., Lin, D., Yuen, P. Y., Liu, K., Xie, J., Dauskardt, R. H., & Cui, Y. (2017) · Advanced Materials · doi:10.1002/adma.201605531 · Cited by 990
Hierarchically Structured Sulfur/Carbon Nanocomposite Material for High-Energy Lithium Battery
Liang, C., Dudney, N. J., & Howe, J. Y. (2009) · Chemistry of Materials · doi:10.1021/cm902050j · Cited by 862
Next-Generation Lithium Metal Anode Engineering via Atomic Layer Deposition
Kozen, A. C., Lin, C.-F., Pearse, A. J., Schroeder, M. A., Han, X., Hu, L., Lee, S.-B., Rubloff, G. W., & Noked, M. (2015) · ACS Nano · doi:10.1021/acsnano.5b02166 · Cited by 816
A review of flexible lithium–sulfur and analogous alkali metal–chalcogen rechargeable batteries
Peng, H.-J., Huang, J.-Q., & Zhang, Q. (2017) · Chemical Society Reviews · doi:10.1039/c7cs00139h · Cited by 680
Self-citationBeyond lithium ion batteries: Higher energy density battery systems based on lithium metal anodes
Shen, X., Liu, H., Cheng, X.-B., Yan, C., & Huang, J.-Q. (2018) · Energy Storage Materials · doi:10.1016/j.ensm.2017.12.002 · Cited by 653
Self-citationLi-Storage via Heterogeneous Reaction in Selected Binary Metal Fluorides and Oxides
Li, H., Balaya, P., & Maier, J. (2004) · Journal of The Electrochemical Society · doi:10.1149/1.1801451 · Cited by 590
Self-citationZhu, B., Jin, Y., Hu, X., Zheng, Q., Zhang, S., Wang, Q., & Zhu, J. (2017) · Advanced Materials · doi:10.1002/adma.201603755 · Cited by 587
Implantable Solid Electrolyte Interphase in Lithium-Metal Batteries
Cheng, X.-B., Yan, C., Chen, X., Guan, C., Huang, J.-Q., Peng, H.-J., Zhang, R., Yang, S.-T., & Zhang, Q. (2017) · Chem · doi:10.1016/j.chempr.2017.01.003 · Cited by 524
Self-citationSurface Fluorination of Reactive Battery Anode Materials for Enhanced Stability
Zhao, J., Liao, L., Shi, F., Lei, T., Chen, G., Pei, A., Sun, J., Yan, K., Zhou, G., Xie, J., et al. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b05251 · Cited by 514
Anodes for Rechargeable Lithium‐Sulfur Batteries
Cao, R., Xu, W., Lv, D., Xiao, J., & Zhang, J. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201402273 · Cited by 502
Markevich, E., Salitra, G., & Aurbach, D. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.7b00163 · Cited by 502
Ionic conductivity in Li3N single crystals
Alpen, U. V., Rabenau, A., & Talat, G. H. (1977) · Applied Physics Letters · doi:10.1063/1.89283 · Cited by 437
Nanodiamonds suppress the growth of lithium dendrites
Cheng, X.-B., Zhao, M.-Q., Chen, C., Pentecost, A., Maleski, K., Mathis, T., Zhang, X.-Q., Zhang, Q., Jiang, J., & Gogotsi, Y. (2017) · Nature Communications · doi:10.1038/s41467-017-00519-2 · Cited by 401
Self-citationCheng, X.-B., Yan, C., Huang, J.-Q., Li, P., Zhu, L., Zhao, L., Zhang, Y., Zhu, W., Yang, S.-T., & Zhang, Q. (2017) · Energy Storage Materials · doi:10.1016/j.ensm.2016.09.003 · Cited by 394
Self-citationShi, Y., Zhou, X., & Yu, G. (2017) · Accounts of Chemical Research · doi:10.1021/acs.accounts.7b00402 · Cited by 361
Yildirim, H., Kinaci, A., Chan, M. K. Y., & Greeley, J. P. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b02904 · Cited by 306
Engineering of lithium-metal anodes towards a safe and stable battery
Wang, L., Zhou, Z., Yan, X., Hou, F., Wen, L., Luo, W., Liang, J., & Dou, S. X. (2018) · Energy Storage Materials · doi:10.1016/j.ensm.2018.02.014 · Cited by 270
Yan, C., Cheng, X.-B., Zhao, C.-Z., Huang, J.-Q., Yang, S.-T., & Zhang, Q. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.07.056 · Cited by 255
Self-citationStrategies Based on Nitride Materials Chemistry to Stabilize Li Metal Anode
Zhu, Y., He, X., & Mo, Y. (2017) · Advanced Science · doi:10.1002/advs.201600517 · Cited by 254
Electronic and Ionic Channels in Working Interfaces of Lithium Metal Anodes
Cheng, X.-B., Yan, C., Zhang, X.-Q., Liu, H., & Zhang, Q. (2018) · ACS Energy Letters · doi:10.1021/acsenergylett.8b00526 · Cited by 252
Self-citationZhang, X., Chen, X., Xu, R., Cheng, X., Peng, H., Zhang, R., Huang, J., & Zhang, Q. (2017) · Angewandte Chemie International Edition · doi:10.1002/anie.201707093 · Cited by 231
Self-citationHu, Z., Zhang, S., Dong, S., Li, W., Li, H., Cui, G., & Chen, L. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b00091 · Cited by 221
Self-citationComprehensive Study of the CuF2 Conversion Reaction Mechanism in a Lithium Ion Battery
Hua, X., Robert, R., Du, L.-S., Wiaderek, K. M., Leskes, M., Chapman, K. W., Chupas, P. J., & Grey, C. P. (2014) · The Journal of Physical Chemistry C · doi:10.1021/jp503902z · Cited by 205
Progress of rechargeable lithium metal batteries based on conversion reactions
Xin, S., Chang, Z., Zhang, X., & Guo, Y. (2016) · National Science Review · doi:10.1093/nsr/nww078 · Cited by 158
Mixed Ionic and Electronic Conductor for Li‐Metal Anode Protection
Yan, J., Yu, J., & Ding, B. (2018) · Advanced Materials · doi:10.1002/adma.201705105 · Cited by 127
Breaking Down the Crystallinity: The Path for Advanced Lithium Batteries
Zu, C., Dolocan, A., Xiao, P., Stauffer, S. K., Henkelman, G., & Manthiram, A. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201501933 · Cited by 84
Ma, Q., Tong, B., Fang, Z., Qi, X., Feng, W., Nie, J., Hu, Y., Li, H., Huang, X., Chen, L., et al. (2016) · Journal of The Electrochemical Society · doi:10.1149/2.1301608jes · Cited by 45
Self-citation
Cited by
Tailoring inorganic–polymer composites for the mass production of solid-state batteries
Fan, L.-Z., He, H., & Nan, C.-W. (2021) · Nature Reviews Materials · doi:10.1038/s41578-021-00320-0 · Cited by 1,034
Zinc anode-compatible in-situ solid electrolyte interphase via cation solvation modulation
Qiu, H., Du, X., Zhao, J., Wang, Y., Ju, J., Chen, Z., Hu, Z., Yan, D., Zhou, X., & Cui, G. (2019) · Nature Communications · doi:10.1038/s41467-019-13436-3 · Cited by 953
Recent Advances in Energy Chemistry between Solid-State Electrolyte and Safe Lithium-Metal Anodes
Cheng, X.-B., Zhao, C.-Z., Yao, Y.-X., Liu, H., & Zhang, Q. (2019) · Chem · doi:10.1016/j.chempr.2018.12.002 · Cited by 874
Self-citationTowards practical lithium-metal anodes
Zhang, X., Yang, Y., & Zhou, Z. (2020) · Chemical Society Reviews · doi:10.1039/c9cs00838a · Cited by 726
Artificial Interphases for Highly Stable Lithium Metal Anode
Xu, R., Cheng, X.-B., Yan, C., Zhang, X.-Q., Xiao, Y., Zhao, C.-Z., Huang, J.-Q., & Zhang, Q. (2019) · Matter · doi:10.1016/j.matt.2019.05.016 · Cited by 721
Self-citation
Metadata
- Authors
- Yan, C., Cheng, X., Yao, Y., Shen, X., Li, B., Li, W., Zhang, R., Huang, J., Li, H., & Zhang, Q.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2018-09-27
- Volume
- 30
- Issue
- 45
- Pages
- e1804461-e1804461
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2893606738
- Cited by
- 427
- References
- 42
- FWCI
- 21.07
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.