The DOI matches its Crossref record; 59 of the 59 references it cites were found in a registry or an index.
Self‐Supported and Flexible Sulfur Cathode Enabled via Synergistic Confinement for High‐Energy‐Density Lithium–Sulfur Batteries
Abstract
Lithium–sulfur (Li–S) batteries have attracted much attention in the field of electrochemical energy storage due to their high energy density and low cost. However, the “shuttle effect” of the sulfur cathode, resulting in poor cyclic performance, is a big barrier for the development of Li–S batteries. Herein, a novel sulfur cathode integrating sulfur, flexible carbon cloth, and metal–organic framework (MOF)‐derived N‐doped carbon nanoarrays with embedded CoP (CC@CoP/C) is designed. These unique flexible nanoarrays with embedded polar CoP nanoparticles not only offer enough voids for volume expansion to maintain the structural stability during the electrochemical process, but also promote the physical encapsulation and chemical entrapment of all sulfur species. Such designed CC@CoP/C cathodes with synergistic confinement (physical adsorption and chemical interactions) for soluble intermediate lithium polysulfides possess high sulfur loadings (as high as 4.17 mg cm–2) and exhibit large specific capacities at different C‐rates. Specially, an outstanding long‐term cycling performance can be reached. For example, an ultralow decay of 0.016% per cycle during the whole 600 cycles at a high current density of 2C is displayed. The current work provides a promising design strategy for high‐energy‐density Li–S batteries.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set
Kresse, G., & Furthmüller, J. (1996) · Physical Review B · doi:10.1103/physrevb.54.11169 · Cited by 123,652
From ultrasoft pseudopotentials to the projector augmented-wave method
Kresse, G., & Joubert, D. (1999) · Physical Review B · doi:10.1103/physrevb.59.1758 · Cited by 85,307
Li-O2 and Li-S batteries with high energy storage
Bruce, P. G., Freunberger, S. A., Hardwick, L. J., & Tarascon, J.-M. (2012) · Nature Materials · doi:10.1038/nmat3191 · Cited by 9,479
Challenges Facing Lithium Batteries and Electrical Double‐Layer Capacitors
Choi, N., Chen, Z., Freunberger, S. A., Ji, X., Sun, Y., Amine, K., Yushin, G., Nazar, L. F., Cho, J., & Bruce, P. G. (2012) · Angewandte Chemie International Edition · doi:10.1002/anie.201201429 · Cited by 2,700
Designing high-energy lithium–sulfur batteries
Seh, Z. W., Sun, Y., Zhang, Q., & Cui, Y. (2016) · Chemical Society Reviews · doi:10.1039/c5cs00410a · Cited by 2,573
Advances in lithium–sulfur batteries based on multifunctional cathodes and electrolytes
Pang, Q., Liang, X., Kwok, C. Y., & Nazar, L. F. (2016) · Nature Energy · doi:10.1038/nenergy.2016.132 · Cited by 2,167
Nanostructured sulfur cathodes
Yang, Y., Zheng, G., & Cui, Y. (2013) · Chemical Society Reviews · doi:10.1039/c2cs35256g · Cited by 1,947
Porous Hollow Carbon@Sulfur Composites for High‐Power Lithium–Sulfur Batteries
Jayaprakash, N., Shen, J., Moganty, S. S., Corona, A., & Archer, L. A. (2011) · Angewandte Chemie International Edition · doi:10.1002/anie.201100637 · Cited by 1,811
Self-citationMore Reliable Lithium‐Sulfur Batteries: Status, Solutions and Prospects
Fang, R., Zhao, S., Sun, Z., Wang, D., Cheng, H., & Li, F. (2017) · Advanced Materials · doi:10.1002/adma.201606823 · Cited by 1,785
Nanostructured Metal Oxides and Sulfides for Lithium–Sulfur Batteries
Liu, X., Huang, J., Zhang, Q., & Mai, L. (2017) · Advanced Materials · doi:10.1002/adma.201601759 · Cited by 1,616
Flexible solid-state supercapacitors: design, fabrication and applications
Lu, X., Yu, M., Wang, G., Tong, Y., & Li, Y. (2014) · Energy & Environmental Science · doi:10.1039/c4ee00960f · Cited by 1,323
Pang, Q., Kundu, D., Cuisinier, M., & Nazar, L. F. (2014) · Nature Communications · doi:10.1038/ncomms5759 · Cited by 1,318
Molybdenum phosphide as an efficient electrocatalyst for the hydrogen evolution reaction
Xiao, P., Sk, M. A., Thia, L., Ge, X., Lim, R. J., Wang, J.-Y., Lim, K. H., & Wang, X. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee00957f · Cited by 1,297
Spherical Ordered Mesoporous Carbon Nanoparticles with High Porosity for Lithium–Sulfur Batteries
Schuster, J., He, G., Mandlmeier, B., Yim, T., Lee, K. T., Bein, T., & Nazar, L. F. (2012) · Angewandte Chemie International Edition · doi:10.1002/anie.201107817 · Cited by 1,114
Lithium sulfur batteries, a mechanistic review
Wild, M., O'Neill, L., Zhang, T., Purkayastha, R., Minton, G., Marinescu, M., & Offer, G. J. (2015) · Energy & Environmental Science · doi:10.1039/c5ee01388g · Cited by 1,107
Huang, J.-Q., Zhuang, T.-Z., Zhang, Q., Peng, H.-J., Chen, C.-M., & Wei, F. (2015) · ACS Nano · doi:10.1021/nn507178a · Cited by 809
Li, G., Sun, J., Hou, W., Jiang, S., Huang, Y., & Geng, J. (2016) · Nature Communications · doi:10.1038/ncomms10601 · Cited by 806
Yolk–Shell Structure of Polyaniline-Coated Sulfur for Lithium–Sulfur Batteries
Zhou, W., Yu, Y., Chen, H., DiSalvo, F. J., & Abruña, H. D. (2013) · Journal of the American Chemical Society · doi:10.1021/ja409508q · Cited by 782
Self-citationZheng, J., Tian, J., Wu, D., Gu, M., Xu, W., Wang, C., Gao, F., Engelhard, M. H., Zhang, J.-G., Liu, J., et al. (2014) · Nano Letters · doi:10.1021/nl404721h · Cited by 719
Self-citationA review of flexible lithium–sulfur and analogous alkali metal–chalcogen rechargeable batteries
Peng, H.-J., Huang, J.-Q., & Zhang, Q. (2017) · Chemical Society Reviews · doi:10.1039/c7cs00139h · Cited by 680
A novel synergistic composite with multi-functional effects for high-performance Li–S batteries
Li, Y.-J., Fan, J.-M., Zheng, M.-S., & Dong, Q.-F. (2016) · Energy & Environmental Science · doi:10.1039/c6ee00104a · Cited by 600
A Flexible Sulfur‐Graphene‐Polypropylene Separator Integrated Electrode for Advanced Li–S Batteries
Zhou, G., Li, L., Wang, D., Shan, X., Pei, S., Li, F., & Cheng, H. (2015) · Advanced Materials · doi:10.1002/adma.201404210 · Cited by 590
Pei, F., An, T., Zang, J., Zhao, X., Fang, X., Zheng, M., Dong, Q., & Zheng, N. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201502539 · Cited by 555
Zhao, M.-Q., Liu, X.-F., Zhang, Q., Tian, G.-L., Huang, J.-Q., Zhu, W., & Wei, F. (2012) · ACS Nano · doi:10.1021/nn304037d · Cited by 553
Multi‐Functional Layered WS2 Nanosheets for Enhancing the Performance of Lithium–Sulfur Batteries
Lei, T., Chen, W., Huang, J., Yan, C., Sun, H., Wang, C., Zhang, W., Li, Y., & Xiong, J. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201601843 · Cited by 548
Deciphering the Modulation Essence of p Bands in Co-Based Compounds on Li-S Chemistry
Zhou, J., Liu, X., Zhu, L., Zhou, J., Guan, Y., Chen, L., Niu, S., Cai, J., Sun, D., Zhu, Y., et al. (2018) · Joule · doi:10.1016/j.joule.2018.08.010 · Cited by 548
He, J., Luo, L., Chen, Y., & Manthiram, A. (2017) · Advanced Materials · doi:10.1002/adma.201702707 · Cited by 521
Ren, W., Zhang, H., Guan, C., & Cheng, C. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201702116 · Cited by 520
Flexible electronics based on inorganic nanowires
Liu, Z., Xu, J., Chen, D., & Shen, G. (2015) · Chemical Society Reviews · doi:10.1039/c4cs00116h · Cited by 512
Self-citationCobalt phosphide nanorods as an efficient electrocatalyst for the hydrogen evolution reaction
Huang, Z., Chen, Z., Chen, Z., Lv, C., Humphrey, M. G., & Zhang, C. (2014) · Nano Energy · doi:10.1016/j.nanoen.2014.08.013 · Cited by 510
Liu, W., Hu, E., Jiang, H., Xiang, Y., Weng, Z., Li, M., Fan, Q., Yu, X., Altman, E. I., & Wang, H. (2016) · Nature Communications · doi:10.1038/ncomms10771 · Cited by 497
Design of Hollow Nanostructures for Energy Storage, Conversion and Production
Wang, J., Cui, Y., & Wang, D. (2019) · Advanced Materials · doi:10.1002/adma.201801993 · Cited by 453
Chen, X., Hou, T., Persson, K. A., & Zhang, Q. (2019) · Materials Today · doi:10.1016/j.mattod.2018.04.007 · Cited by 446
Kim, H., Lee, J., Ahn, H., Kim, O., & Park, M. J. (2015) · Nature Communications · doi:10.1038/ncomms8278 · Cited by 428
Zhang, J., Yang, C., Yin, Y., Wan, L., & Guo, Y. (2016) · Advanced Materials · doi:10.1002/adma.201602913 · Cited by 418
Recent Advances in Hollow Porous Carbon Materials for Lithium–Sulfur Batteries
Fu, A., Wang, C., Pei, F., Cui, J., Fang, X., & Zheng, N. (2019) · Small · doi:10.1002/smll.201804786 · Cited by 417
Chung, S., & Manthiram, A. (2014) · Advanced Materials · doi:10.1002/adma.201402893 · Cited by 364
Conder, J., Bouchet, R., Trabesinger, S., Marino, C., Gubler, L., & Villevieille, C. (2017) · Nature Energy · doi:10.1038/nenergy.2017.69 · Cited by 362
Su, D., Cortie, M., & Wang, G. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201602014 · Cited by 360
Metal–organic frameworks for lithium–sulfur batteries
Zheng, Y., Zheng, S., Xue, H., & Pang, H. (2019) · Journal of Materials Chemistry A · doi:10.1039/c8ta11075a · Cited by 351
Hollow Carbon Spheres and Their Hybrid Nanomaterials in Electrochemical Energy Storage
Liu, T., Zhang, L., Cheng, B., & Yu, J. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201803900 · Cited by 344
Chen, T., Ma, L., Cheng, B., Chen, R., Hu, Y., Zhu, G., Wang, Y., Liang, J., Tie, Z., Liu, J., et al. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.05.064 · Cited by 334
Self-citationSulfur Cathodes Based on Conductive MXene Nanosheets for High‐Performance Lithium–Sulfur Batteries
Liang, X., Garsuch, A., & Nazar, L. F. (2015) · Angewandte Chemie · doi:10.1002/ange.201410174 · Cited by 313
Rehman, S., Guo, S., & Hou, Y. (2016) · Advanced Materials · doi:10.1002/adma.201506111 · Cited by 311
Graphene materials for lithium–sulfur batteries
Yu, M., Li, R., Wu, M., & Shi, G. (2015) · Energy Storage Materials · doi:10.1016/j.ensm.2015.08.004 · Cited by 268
Fang, G., Zhou, J., Liang, C., Pan, A., Zhang, C., Tang, Y., Tan, X., Liu, J., & Liang, S. (2016) · Nano Energy · doi:10.1016/j.nanoen.2016.05.009 · Cited by 264
Self-citationLi, M., Carter, R., Douglas, A., Oakes, L., & Pint, C. L. (2017) · ACS Nano · doi:10.1021/acsnano.7b01437 · Cited by 254
Flexible and stable high-energy lithium-sulfur full batteries with only 100% oversized lithium
Chang, J., Shang, J., Sun, Y., Ono, L. K., Wang, D., Ma, Z., Huang, Q., Chen, D., Liu, G., Cui, Y., et al. (2018) · Nature Communications · doi:10.1038/s41467-018-06879-7 · Cited by 250
Ma, L., Chen, R., Zhu, G., Hu, Y., Wang, Y., Chen, T., Liu, J., & Jin, Z. (2017) · ACS Nano · doi:10.1021/acsnano.7b03227 · Cited by 249
Self-citationAbouali, S., Garakani, M. A., Zhang, B., Xu, Z., Heidari, E. K., Huang, J.-Q., Huang, J., & Kim, J. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b02787 · Cited by 232
Polysulfide-Scission Reagents for the Suppression of the Shuttle Effect in Lithium–Sulfur Batteries
Hua, W., Yang, Z., Nie, H., Li, Z., Yang, J., Guo, Z., Ruan, C., Chen, X., & Huang, S. (2017) · ACS Nano · doi:10.1021/acsnano.6b08627 · Cited by 224
Zhang, H., Li, Y., Zhang, G., Xu, T., Wan, P., & Sun, X. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta00707k · Cited by 153
Yan, Y., Cheng, C., Zhang, L., Li, Y., & Lu, J. B. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201900148 · Cited by 144
Li, Z., Zhang, J., & Lou, X. W. (2015) · Angewandte Chemie · doi:10.1002/ange.201506972 · Cited by 127
Sun, Q., Fang, X., Weng, W., Deng, J., Chen, P., Ren, J., Guan, G., Wang, M., & Peng, H. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201504514 · Cited by 95
Chemical grafting of Co 9 S 8 onto C 60 for hydrogen spillover and storage
Han, L., Qin, W., Zhou, J. J., Jian, J., Lu, S., Wu, X., Fan, G., Gao, P., & Liu, B. (2017) · Nanoscale · doi:10.1039/c7nr00581d · Cited by 45
Yang, L., Wang, K., Du, G., Zhu, W., Cui, L., Zhang, C., Sun, X., & Asiri, A. M. (2016) · Nanotechnology · doi:10.1088/0957-4484/27/47/475702 · Cited by 21
Self-citationXiao, D., Zhang, H., Chen, C., Liu, Y., Yuan, S., & Lü, C. (2017) · ChemElectroChem · doi:10.1002/celc.201700643 · Cited by 20
Cobalt phosphide nanowall array as an efficient 3D catalyst electrode for methanol electro-oxidation
Liu, D., Lu, W., Wang, K., Du, G., Asiri, A. M., Lu, Q. H., & Sun, X. (2016) · Nanotechnology · doi:10.1088/0957-4484/27/44/44lt02 · Cited by 19
Cited by
Advances in Lithium–Sulfur Batteries: From Academic Research to Commercial Viability
Chen, Y., Wang, T., Tian, H., Su, D., Zhang, Q., & Wang, G. (2021) · Advanced Materials · doi:10.1002/adma.202003666 · Cited by 870
Cation-doped ZnS catalysts for polysulfide conversion in lithium–sulfur batteries
Shen, Z., Jin, X., Tian, J., Li, M., Yuan, Y., Zhang, S., Fang, S., Fan, X., Xu, W., Lu, H., et al. (2022) · Nature Catalysis · doi:10.1038/s41929-022-00804-4 · Cited by 621
Multifunctional Transition Metal‐Based Phosphides in Energy‐Related Electrocatalysis
Li, Y., Dong, Z., & Jiao, L. (2020) · Advanced Energy Materials · doi:10.1002/aenm.201902104 · Cited by 603
Strategies toward High‐Loading Lithium–Sulfur Battery
Hu, Y., Chen, W., Lei, T., Jiao, Y., Huang, J., Hu, A., Gong, C., Yan, C., Wang, X., & Xiong, J. (2020) · Advanced Energy Materials · doi:10.1002/aenm.202000082 · Cited by 402
Ye, Z., Jiang, Y., Li, L., Wu, F., & Chen, R. (2021) · Advanced Materials · doi:10.1002/adma.202101204 · Cited by 330
Metadata
- Authors
- Wang, Z., Shen, J., Liu, J., Xu, X., Liu, Z., Hu, R., Yang, L., Feng, Y., Liu, J., Shi, Z., Ouyang, L., Yu, Y., & Zhu, M.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2019-06-20
- Volume
- 31
- Issue
- 33
- Pages
- e1902228-e1902228
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2951218469
- Cited by
- 309
- References
- 59
- FWCI
- 18.24
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.