The DOI matches its Crossref record; 44 of the 44 references it cites were found in a registry or an index.
A Highly Reversible, Dendrite‐Free Lithium Metal Anode Enabled by a Lithium‐Fluoride‐Enriched Interphase
Abstract
Metallic lithium is the most competitive anode material for next‐generation lithium (Li)‐ion batteries. However, one of its major issues is Li dendrite growth and detachment, which not only causes safety issues, but also continuously consumes electrolyte and Li, leading to low coulombic efficiency (CE) and short cycle life for Li metal batteries. Herein, the Li dendrite growth of metallic lithium anode is suppressed by forming a lithium fluoride (LiF)‐enriched solid electrolyte interphase (SEI) through the lithiation of surface‐fluorinated mesocarbon microbeads (MCMB‐F) anodes. The robust LiF‐enriched SEI with high interfacial energy to Li metal effectively promotes planar growth of Li metal on the Li surface and meanwhile prevents its vertical penetration into the LiF‐enriched SEI from forming Li dendrites. At a discharge capacity of 1.2 mAh cm−2, a high CE of >99.2% for Li plating/stripping in FEC‐based electrolyte is achieved within 25 cycles. Coupling the pre‐lithiated MCMB‐F (Li@MCMB‐F) anode with a commercial LiFePO 4 cathode at the positive/negative (P/N) capacity ratio of 1:1, the LiFePO 4//Li@MCMB‐F cells can be charged/discharged at a high areal capacity of 2.4 mAh cm−2 for 110 times at a negligible capacity decay of 0.01% per cycle.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Armand, M., & Tarascon, J.-M. (2008) · Nature · doi:10.1038/451652a · Cited by 19,612
Electrical energy storage for the grid: A battery of choices
Dunn, B., Kamath, H., & Tarascon, J.-M. (2011) · Science · doi:10.1126/science.1212741 · Cited by 15,072
Challenges for Rechargeable Li Batteries
Goodenough, J. B., & Kim, Y. (2010) · Chemistry of Materials · doi:10.1021/cm901452z · Cited by 10,943
Li-O2 and Li-S batteries with high energy storage
Bruce, P. G., Freunberger, S. A., Hardwick, L. J., & Tarascon, J.-M. (2012) · Nature Materials · doi:10.1038/nmat3191 · Cited by 9,479
Reviving the lithium metal anode for high-energy batteries
Lin, D., Liu, Y., & Cui, Y. (2017) · Nature Nanotechnology · doi:10.1038/nnano.2017.16 · Cited by 6,763
Toward Safe Lithium Metal Anode in Rechargeable Batteries: A Review
Cheng, X.-B., Zhang, R., Zhao, C.-Z., & Zhang, Q. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00115 · Cited by 6,197
Shape‐Controlled Synthesis of Metal Nanocrystals: Simple Chemistry Meets Complex Physics?
Xia, Y., Xiong, Y., Lim, B., & Skrabalak, S. E. (2009) · Angewandte Chemie International Edition · doi:10.1002/anie.200802248 · Cited by 5,702
Promise and reality of post-lithium-ion batteries with high energy densities
Choi, J. W., & Aurbach, D. (2016) · Nature Reviews Materials · doi:10.1038/natrevmats.2016.13 · Cited by 5,110
Lithium metal anodes for rechargeable batteries
Xu, W., Wang, J., Ding, F., Chen, X., Nasybulin, E., Zhang, Y., & Zhang, J.-G. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee40795k · Cited by 4,704
High rate and stable cycling of lithium metal anode
Qian, J., Henderson, W. A., Xu, W., Bhattacharya, P., Engelhard, M., Borodin, O., & Zhang, J.-G. (2015) · Nature Communications · doi:10.1038/ncomms7362 · Cited by 2,561
A new class of Solvent-in-Salt electrolyte for high-energy rechargeable metallic lithium batteries
Suo, L., Hu, Y.-S., Li, H., Armand, M., & Chen, L. (2013) · Nature Communications · doi:10.1038/ncomms2513 · Cited by 2,314
Self-citationAurbach, D. (2002) · Solid State Ionics · doi:10.1016/s0167-2738(02)00080-2 · Cited by 1,697
Stable lithium electrodeposition in liquid and nanoporous solid electrolytes
Lu, Y., Tu, Z., & Archer, L. A. (2014) · Nature Materials · doi:10.1038/nmat4041 · Cited by 1,592
Yang, C.-P., Yin, Y.-X., Zhang, S.-F., Li, N.-W., & Guo, Y.-G. (2015) · Nature Communications · doi:10.1038/ncomms9058 · Cited by 1,589
Self-citationAn Artificial Solid Electrolyte Interphase Layer for Stable Lithium Metal Anodes
Li, N., Yin, Y., Yang, C., & Guo, Y. (2016) · Advanced Materials · doi:10.1002/adma.201504526 · Cited by 1,577
Self-citationThe synergetic effect of lithium polysulfide and lithium nitrate to prevent lithium dendrite growth
Li, W., Yao, H., Yan, K., Zheng, G., Liang, Z., Chiang, Y.-M., & Cui, Y. (2015) · Nature Communications · doi:10.1038/ncomms8436 · Cited by 1,540
Quantifying inactive lithium in lithium metal batteries
Fang, C., Li, J., Zhang, M., Zhang, Y., Yang, F., Lee, J. Z., Lee, M.-H., Alvarado, J., Schroeder, M. A., Yang, Y., et al. (2019) · Nature · doi:10.1038/s41586-019-1481-z · Cited by 1,413
Non-flammable electrolyte enables Li-metal batteries with aggressive cathode chemistries
Fan, X., Chen, L., Borodin, O., Ji, X., Chen, J., Hou, S., Deng, T., Zheng, J., Yang, C., Liou, S.-C., et al. (2018) · Nature Nanotechnology · doi:10.1038/s41565-018-0183-2 · Cited by 1,371
Self-citationStable cycling of high-voltage lithium metal batteries in ether electrolytes
Jiao, S., Ren, X., Cao, R., Engelhard, M. H., Liu, Y., Hu, D., Mei, D., Zheng, J., Zhao, W., Li, Q., et al. (2018) · Nature Energy · doi:10.1038/s41560-018-0199-8 · Cited by 1,149
Liu, Y., Lin, D., Yuen, P. Y., Liu, K., Xie, J., Dauskardt, R. H., & Cui, Y. (2017) · Advanced Materials · doi:10.1002/adma.201605531 · Cited by 990
Role of LiNO3 in rechargeable lithium/sulfur battery
Zhang, S. S. (2012) · Electrochimica Acta · doi:10.1016/j.electacta.2012.03.081 · Cited by 947
Chemical Dealloying Derived 3D Porous Current Collector for Li Metal Anodes
Yun, Q., He, Y., Lv, W., Zhao, Y., Li, B., Kang, F., & Yang, Q. (2016) · Advanced Materials · doi:10.1002/adma.201601409 · Cited by 870
3D Porous Cu Current Collector/Li‐Metal Composite Anode for Stable Lithium‐Metal Batteries
Li, Q., Zhu, S., & Lu, Y. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201606422 · Cited by 854
Fluorinated solid electrolyte interphase enables highly reversible solid-state Li metal battery
Fan, X., Ji, X., Han, F., Yue, J., Chen, J., Chen, L., Deng, T., Jiang, J., & Wang, C. (2018) · Science Advances · doi:10.1126/sciadv.aau9245 · Cited by 838
Self-citationFluorine-donating electrolytes enable highly reversible 5-V-class Li metal batteries
Suo, L., Xue, W., Gobet, M., Greenbaum, S. G., Wang, C., Chen, Y., Yang, W., Li, Y., & Li, J. (2018) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1712895115 · Cited by 679
Self-citationHow we made the Li-ion rechargeable battery
Goodenough, J. B. (2018) · Nature Electronics · doi:10.1038/s41928-018-0048-6 · Cited by 602
A highly reversible room-temperature lithium metal battery based on crosslinked hairy nanoparticles
Choudhury, S., Mangal, R., Agrawal, A., & Archer, L. A. (2015) · Nature Communications · doi:10.1038/ncomms10101 · Cited by 450
Lithium anode stable in air for low-cost fabrication of a dendrite-free lithium battery
Shen, X., Li, Y., Qian, T., Liu, J., Zhou, J., Yan, C., & Goodenough, J. B. (2019) · Nature Communications · doi:10.1038/s41467-019-08767-0 · Cited by 386
Stitching h-BN by atomic layer deposition of LiF as a stable interface for lithium metal anode
Xie, J., Liao, L., Gong, Y., Li, Y., Shi, F., Pei, A., Sun, J., Zhang, R., Kong, B., Subbaraman, R., et al. (2017) · Science Advances · doi:10.1126/sciadv.aao3170 · Cited by 308
Graphite-Encapsulated Li-Metal Hybrid Anodes for High-Capacity Li Batteries
Sun, Y., Zheng, G., Seh, Z. W., Liu, N., Wang, S., Sun, J., Lee, H. R., & Cui, Y. (2016) · Chem · doi:10.1016/j.chempr.2016.07.009 · Cited by 305
Yang, H., Bang, H., Amine, K., & Prakash, J. (2005) · Journal of The Electrochemical Society · doi:10.1149/1.1836126 · Cited by 270
Nie, M., & Lucht, B. L. (2014) · Journal of The Electrochemical Society · doi:10.1149/2.054406jes · Cited by 269
Li 2 S 5 -based ternary-salt electrolyte for robust lithium metal anode
Zhao, C.-Z., Cheng, X.-B., Zhang, R., Peng, H.-J., Huang, J.-Q., Ran, R., Huang, Z.-H., Wei, F., & Zhang, Q. (2016) · Energy Storage Materials · doi:10.1016/j.ensm.2016.01.007 · Cited by 260
Wang, H., Lin, D., Liu, Y., Li, Y., & Cui, Y. (2017) · Science Advances · doi:10.1126/sciadv.1701301 · Cited by 244
Cheng, Q., Wei, L., Liu, Z., Ni, N., Sang, Z., Zhu, B., Xu, W., Chen, M., Miao, Y., Chen, L.-Q., et al. (2018) · Nature Communications · doi:10.1038/s41467-018-05289-z · Cited by 207
Self-citationRole of Capping Agent in Wet Synthesis of Nanoparticles
Phan, C. M., & Nguyen, H. M. (2017) · The Journal of Physical Chemistry A · doi:10.1021/acs.jpca.7b02186 · Cited by 199
Study of polypyrrole graphite composite as anode material for secondary lithium-ion batteries
Veeraraghavan, B., Paul, J., Haran, B., et al. (2002) · Journal of Power Sources · doi:10.1016/s0378-7753(02)00105-2 · Cited by 147
Alcántara, R., Madrigal, F. J. F., Lavela, P., Tirado, J. L., Mateos, J. M. J., de Salazar, C. G., Stoyanova, R. K., & Zhecheva, E. N. (2000) · Carbon · doi:10.1016/s0008-6223(99)00215-8 · Cited by 144
Wang, M., Peng, Z., Luo, W., Ren, F., Li, Z., Zhang, Q., He, H., Ouyang, C., & Wang, D. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201802912 · Cited by 136
An Interconnected Channel‐Like Framework as Host for Lithium Metal Composite Anodes
Wang, H., Lin, D., Xie, J., Liu, Y., Chen, H., Li, Y., Xu, J., Zhou, G., Zhang, Z., Pei, A., et al. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201802720 · Cited by 122
Made, J. I., Muthukannan, V., Camellia, P., & Balasubramanian, N. (2018) · Diamond and Related Materials · doi:10.1016/j.diamond.2018.07.009 · Cited by 72
Giordani, V., Walker, W. T., Bryantsev, V. S., et al. (2013) · Journal of The Electrochemical Society · doi:10.1149/2.097309jes · Cited by 71
SEI Dynamics in Metal Oxide Conversion Electrodes of Li-Ion Batteries
Rezvani, S. J., Nobili, F., Gunnella, R., Ali, M., Tossici, R., Passerini, S., & Cicco, A. D. (2017) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.7b08259 · Cited by 53
Carbonate Free Electrolyte for Lithium Ion Batteries Containing γ-Butyrolactone and Methyl Butyrate
Lazar, M. L., & Lucht, B. L. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0601506jes · Cited by 47
Cited by
High-voltage liquid electrolytes for Li batteries: progress and perspectives
Fan, X., & Wang, C. (2021) · Chemical Society Reviews · doi:10.1039/d1cs00450f · Cited by 980
Self-citationTowards High Performance Li–S Batteries via Sulfonate‐Rich COF‐Modified Separator
Xu, J., An, S., Song, X., Cao, Y., Wang, N., Qiu, X., Zhang, Y., Chen, J., Duan, X., Huang, J., et al. (2021) · Advanced Materials · doi:10.1002/adma.202105178 · Cited by 414
Self-citationRevisiting the Roles of Natural Graphite in Ongoing Lithium‐Ion Batteries
Zhao, L., Ding, B., Qin, X., Wang, Z., Lv, W., He, Y., Yang, Q., & Kang, F. (2022) · Advanced Materials · doi:10.1002/adma.202106704 · Cited by 390
Fluorination in advanced battery design
Wang, Y., Wu, Z., Azad, F. M., Zhu, Y., Wang, L., Hawker, C. J., Whittaker, A. K., Forsyth, M., & Zhang, C. (2023) · Nature Reviews Materials · doi:10.1038/s41578-023-00623-4 · Cited by 333
Advances in the Design of 3D‐Structured Electrode Materials for Lithium‐Metal Anodes
Park, S., Jin, H., & Yun, Y. S. (2020) · Advanced Materials · doi:10.1002/adma.202002193 · Cited by 301
Metadata
- Authors
- Cui, C., Yang, C., Eidson, N., Chen, J., Han, F., Chen, L., Luo, C., Wang, P., Fan, X., & Wang, C.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2020-02-14
- Volume
- 32
- Issue
- 12
- Pages
- e1906427-e1906427
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W3006362419
- Cited by
- 272
- References
- 44
- FWCI
- 13.92
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.