The DOI matches its Crossref record; 131 of the 131 references it cites were found in a registry or an index.
Ice Templating Soft Matter: Fundamental Principles and Fabrication Approaches to Tailor Pore Structure and Morphology and Their Biomedical Applications
Abstract
Porous scaffolds are widely used in biomedical applications where pore size and morphology influence a range of biological processes, including mass transfer of solutes, cellular interactions and organization, immune responses, and tissue vascularization, as well as drug delivery from biomaterials. Ice templating, one of the most widely utilized techniques for the fabrication of porous materials, allows control over pore morphology by controlling ice formation in a suspension of solutes. By fine‐tuning freezing and solute parameters, ice templating can be used to incorporate pores with tunable morphological features into a wide range of materials using a simple, accessible, and scalable process. While soft matter is widely ice templated for biomedical applications and includes commercial and clinical products, the principles underpinning its ice templating are not reviewed as well as their inorganic counterparts. This review describes and critically evaluates fundamental principles, fabrication and characterization approaches, and biomedical applications of ice templating in polymer‐based biomaterials. It describes the utility of porous scaffolds in biomedical applications, highlighting biological mechanisms impacted by pore features, outlines the physical and thermodynamic mechanisms underpinning ice templating, describes common fabrication setups, critically evaluates complexities of ice templating specific to polymers, and discusses future directions in this field.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Porosity of 3D biomaterial scaffolds and osteogenesis
Karageorgiou, V., & Kaplan, D. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2005.02.002 · Cited by 6,622
Introduction to chemical engineering thermodynamics
Smith, J. M. (1950) · Journal of Chemical Education · doi:10.1021/ed027p584.3 · Cited by 4,973
Fundamentals of Solidification
Kurz, W., & Fisher, D. J. (2012) · ASM International eBooks · doi:10.31399/asm.tb.pdub.t53420429 · Cited by 3,287
Three-Dimensional Scaffolds for Tissue Engineering Applications: Role of Porosity and Pore Size
Loh, Q. L., & Choong, C. (2013) · Tissue Engineering Part B: Reviews · doi:10.1089/ten.teb.2012.0437 · Cited by 2,668
Murphy, C. M., Haugh, M. G., & O'Brien, F. J. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2009.09.063 · Cited by 2,056
Novel crosslinking methods to design hydrogels
Hennink, W. E., & van Nostrum, C. F. (2002) · Advanced Drug Delivery Reviews · doi:10.1016/s0169-409x(01)00240-x · Cited by 1,962
Classification, processing and application of hydrogels: A review
Ullah, F., Othman, M. B. H., Javed, F., Ahmad, Z., & Akil, H. M. (2015) · Materials Science and Engineering: C · doi:10.1016/j.msec.2015.07.053 · Cited by 1,555
Steady state columnar and equiaxed growth of dendrites and eutectic
Hunt, J. D. (1984) · Materials Science and Engineering · doi:10.1016/0025-5416(84)90201-5 · Cited by 1,470
GOVENDER, S., CSIMMA, C., GENANT, H. K., & VALENTIN-OPRAN, A. (2002) · The Journal of Bone and Joint Surgery-American Volume · doi:10.2106/00004623-200212000-00001 · Cited by 1,308
Engineering Substrate Topography at the Micro‐ and Nanoscale to Control Cell Function
Bettinger, C. J., Langer, R., & Borenstein, J. T. (2009) · Angewandte Chemie International Edition · doi:10.1002/anie.200805179 · Cited by 1,258
Novel crosslinking methods to design hydrogels
Hennink, W. E., & van Nostrum, C. F. (2012) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2012.09.009 · Cited by 1,171
Design of an artificial skin. I. Basic design principles
Yannas, I. V., & Burke, J. F. (1980) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820140108 · Cited by 1,044
Mercury Porosimetry: A General (Practical) Overview
Giesche, H. (2006) · Particle & Particle Systems Characterization · doi:10.1002/ppsc.200601009 · Cited by 916
Advances in crosslinking strategies of biomedical hydrogels
Hu, W., Wang, Z., Xiao, Y., Zhang, S., & Wang, J. (2019) · Biomaterials Science · doi:10.1039/c8bm01246f · Cited by 896
Design of an artificial skin. I. Basic design principles
Yannas, I. V., & Burke, J. F. (1980) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820140314 · Cited by 889
Shao, G., Hanaor, D. A. H., Shen, X., & Gurlo, A. (2020) · Advanced Materials · doi:10.1002/adma.201907176 · Cited by 871
Accordion-like honeycombs for tissue engineering of cardiac anisotropy
Engelmayr, G. C., Cheng, M., Bettinger, C. J., Borenstein, J. T., Langer, R., & Freed, L. E. (2008) · Nature Materials · doi:10.1038/nmat2316 · Cited by 848
Collagen sponges for bone regeneration with rhBMP-2
Geiger, M. (2003) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2003.08.010 · Cited by 751
RepRap – the replicating rapid prototyper
Jones, R., Haufe, P., Sells, E., Iravani, P., Olliver, V., Palmer, C., & Bowyer, A. (2011) · Robotica · doi:10.1017/s026357471000069x · Cited by 736
Guan, J., Fujimoto, K. L., Sacks, M. S., & Wagner, W. R. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.10.018 · Cited by 703
Hydrogels and Their Applications in Targeted Drug Delivery
Narayanaswamy, R., & Torchilin, V. P. (2019) · Molecules · doi:10.3390/molecules24030603 · Cited by 664
Vascularization and Angiogenesis in Tissue Engineering: Beyond Creating Static Networks
Rouwkema, J., & Khademhosseini, A. (2016) · Trends in Biotechnology · doi:10.1016/j.tibtech.2016.03.002 · Cited by 651
Understanding the effect of mean pore size on cell activity in collagen-glycosaminoglycan scaffolds
Murphy, C. M., & O’Brien, F. J. (2010) · Cell Adhesion & Migration · doi:10.4161/cam.4.3.11747 · Cited by 641
Design of an artificial skin. II. Control of chemical composition
Yannas, I. V., Burke, J. F., Gordon, P. L., Huang, C., & Rubenstein, R. H. (1980) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820140203 · Cited by 590
DiameterJ: A validated open source nanofiber diameter measurement tool
Hotaling, N. A., Bharti, K., Kriel, H., & Simon, C. G. (2015) · Biomaterials · doi:10.1016/j.biomaterials.2015.05.015 · Cited by 531
Topography, Cell Response, and Nerve Regeneration
Hoffman-Kim, D., Mitchel, J. A., & Bellamkonda, R. V. (2010) · Annual Review of Biomedical Engineering · doi:10.1146/annurev-bioeng-070909-105351 · Cited by 516
Injectable preformed scaffolds with shape-memory properties
Bencherif, S. A., Sands, R. W., Bhatta, D., Arany, P., Verbeke, C. S., Edwards, D. A., & Mooney, D. J. (2012) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1211516109 · Cited by 499
Bioinspired large-scale aligned porous materials assembled with dual temperature gradients
Bai, H., Chen, Y., Delattre, B., Tomsia, A. P., & Ritchie, R. O. (2015) · Science Advances · doi:10.1126/sciadv.1500849 · Cited by 483
Polymer Data Handbook: Second Edition
(2009) · doi:10.1093/oso/9780195181012.001.0001 · Cited by 477
Karande, T. S., Ong, J. L., & Agrawal, C. M. (2004) · Annals of Biomedical Engineering · doi:10.1007/s10439-004-7825-2 · Cited by 457
Gutiérrez, M. C., Ferrer, M. L., & del Monte, F. (2008) · Chemistry of Materials · doi:10.1021/cm702028z · Cited by 450
Phase separation, pore structure, and properties of nanofibrous gelatin scaffolds
Liu, X., & Ma, P. X. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2009.04.024 · Cited by 444
Highly Tunable Elastomeric Silk Biomaterials
Partlow, B. P., Hanna, C. W., Rnjak‐Kovacina, J., Moreau, J. E., Applegate, M. B., Burke, K. A., Marelli, B., Mitropoulos, A. N., Omenetto, F. G., & Kaplan, D. L. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201400526 · Cited by 432
Self-citationCollective cell migration: guidance principles and hierarchies
Haeger, A., Wolf, K., Zegers, M. M., & Friedl, P. (2015) · Trends in Cell Biology · doi:10.1016/j.tcb.2015.06.003 · Cited by 430
Sussman, E. M., Halpin, M. C., Muster, J., Moon, R. T., & Ratner, B. D. (2014) · Annals of Biomedical Engineering · doi:10.1007/s10439-013-0933-0 · Cited by 416
Bai, H., Walsh, F., Gludovatz, B., Delattre, B., Huang, C., Chen, Y., Tomsia, A. P., & Ritchie, R. O. (2016) · Advanced Materials · doi:10.1002/adma.201504313 · Cited by 410
Scotti, K. L., & Dunand, D. C. (2018) · Progress in Materials Science · doi:10.1016/j.pmatsci.2018.01.001 · Cited by 377
Biomaterials by freeze casting
Wegst, U. G. K., Schecter, M., Donius, A. E., & Hunger, P. M. (2010) · Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences · doi:10.1098/rsta.2010.0014 · Cited by 375
Freeze casting of porous materials: review of critical factors in microstructure evolution
Li, W. L., Lu, K., & Walz, J. Y. (2012) · International Materials Reviews · doi:10.1179/1743280411y.0000000011 · Cited by 372
Design of an artificial skin. Part III. Control of pore structure
Dagalakis, N., Flink, J., Stasikelis, P., Burke, J. F., & Yannas, I. V. (1980) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820140417 · Cited by 358
Engineering functionally graded tissue engineering scaffolds
Leong, K. F., Chua, C. K., Sudarmadji, N., & Yeong, W. Y. (2008) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2007.11.002 · Cited by 346
The Pivotal Role of Vascularization in Tissue Engineering
Auger, F. A., Gibot, L., & Lacroix, D. (2013) · Annual Review of Biomedical Engineering · doi:10.1146/annurev-bioeng-071812-152428 · Cited by 334
Latest Advances in Cryogel Technology for Biomedical Applications
Memic, A., Colombani, T., Eggermont, L. J., Rezaeeyazdi, M., Steingold, J., Rogers, Z. J., Navare, K. J., Mohammed, H. S., & Bencherif, S. A. (2019) · Advanced Therapeutics · doi:10.1002/adtp.201800114 · Cited by 310
Cryogels for biomedical applications
Henderson, T. M. A., Ladewig, K., Haylock, D. N., McLean, K. M., & O'Connor, A. J. (2013) · Journal of Materials Chemistry B · doi:10.1039/c3tb20280a · Cited by 296
A comprehensive review of cryogels and their roles in tissue engineering applications
Hixon, K. R., Lu, T., & Sell, S. A. (2017) · Acta Biomaterialia · doi:10.1016/j.actbio.2017.08.033 · Cited by 280
Engineering cell alignment in vitro
Li, Y., Huang, G., Zhang, X., Wang, L., Du, Y., Lu, T. J., & Xu, F. (2014) · Biotechnology Advances · doi:10.1016/j.biotechadv.2013.11.007 · Cited by 272
Engineering biomaterials to integrate and heal: The biocompatibility paradigm shifts
Bryers, J. D., Giachelli, C. M., & Ratner, B. D. (2012) · Biotechnology and Bioengineering · doi:10.1002/bit.24559 · Cited by 271
Ryssel, H., Gazyakan, E., Germann, G., & Öhlbauer, M. (2008) · Burns · doi:10.1016/j.burns.2007.01.018 · Cited by 253
Feng, B., Jinkang, Z., Zhen, W., Jianxi, L., Jiang, C., Jian, L., Guolin, M., & Xin, D. (2011) · Biomedical Materials · doi:10.1088/1748-6041/6/1/015007 · Cited by 252
Composite Hydrogels with Tunable Anisotropic Morphologies and Mechanical Properties
Chau, M., De France, K. J., Kopera, B., Machado, V. R., Rosenfeldt, S., Reyes, L., Chan, K. J. W., Förster, S., Cranston, E. D., Hoare, T., et al. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b00792 · Cited by 251
Stokols, S., & Tuszynski, M. H. (2004) · Biomaterials · doi:10.1016/j.biomaterials.2004.01.041 · Cited by 232
Collagen Matrix (DuraGen) in Dural Repair: Analysis of a New Modified Technique
Narotam, P. K., José, S., Nathoo, N., Taylon, C., & Vora, Y. (2004) · Spine · doi:10.1097/01.brs.0000148049.69541.ad · Cited by 225
Jiang, S., Lyu, C., Zhao, P., Li, W., Kong, W., Huang, C., Genin, G. M., & Du, Y. (2019) · Nature Communications · doi:10.1038/s41467-019-11397-1 · Cited by 209
Akbarzadeh, R., & Yousefi, A. (2014) · Journal of Biomedical Materials Research Part B: Applied Biomaterials · doi:10.1002/jbm.b.33101 · Cited by 208
Kumar, A., Lee, Y., Kim, D., Rao, K. M., Kim, J., Park, S., Haider, A., Lee, D. H., & Han, S. S. (2017) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2016.10.085 · Cited by 204
Freezing phenomena in ice–water systems
Akyurt, M., Zaki, G. M., & Habeebullah, B. A. (2002) · Energy Conversion and Management · doi:10.1016/s0196-8904(01)00129-7 · Cited by 201
Collagen‐based wound dressings: Control of the pore structure and morphology
Doillon, C. J., Whyne, C. F., Brandwein, S., & Silver, F. H. (1986) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820200811 · Cited by 196
Lyophilized Silk Sponges: A Versatile Biomaterial Platform for Soft Tissue Engineering
Rnjak-Kovacina, J., Wray, L. S., Burke, K. A., Torregrosa, T., Golinski, J. M., Huang, W., & Kaplan, D. L. (2015) · ACS Biomaterials Science & Engineering · doi:10.1021/ab500149p · Cited by 181
Self-citationTylek, T., Blum, C., Hrynevich, A., Schlegelmilch, K., Schilling, T., Dalton, P. D., & Groll, J. (2020) · Biofabrication · doi:10.1088/1758-5090/ab5f4e · Cited by 161
Modular assembly of thick multifunctional cardiac patches
Fleischer, S., Shapira, A., Feiner, R., & Dvir, T. (2017) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1615728114 · Cited by 160
Waschkies, T., Oberacker, R., & Hoffmann, M. J. (2011) · Acta Materialia · doi:10.1016/j.actamat.2011.04.046 · Cited by 159
Intrinsic and extrinsic control of freeze casting
Nelson, I. B., & Naleway, S. E. (2019) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2018.11.011 · Cited by 146
The Basics of Integra Dermal Regeneration Template and its Expanding Clinical Applications
Chang, D. K., Louis, M. R., Gimenez, A. R., & Reece, E. M. (2019) · Seminars in Plastic Surgery · doi:10.1055/s-0039-1693401 · Cited by 139
Freezing Colloids: Observations, Principles, Control, and Use
Deville, S. (2017) · Engineering materials and processes · doi:10.1007/978-3-319-50515-2 · Cited by 138
The Use of Matriderm and Autologous Skin Graft in the Treatment of Full Thickness Skin Defects
Min, J. H., Yun, I. S., Lew, D. H., Roh, T. S., & Lee, W. J. (2014) · Archives of Plastic Surgery · doi:10.5999/aps.2014.41.4.330 · Cited by 137
Biomimetic collagen scaffolds with anisotropic pore architecture
Davidenko, N., Gibb, T., Schuster, C., Best, S. M., Campbell, J. J., Watson, C. J., & Cameron, R. E. (2011) · Acta Biomaterialia · doi:10.1016/j.actbio.2011.09.033 · Cited by 136
Influence of Particle Size on Ice Nucleation and Growth During the Ice‐Templating Process
Deville, S., Maire, É., Lasalle, A., Bogner, A., Gauthier, C., Leloup, J., & Guizard, C. (2010) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2010.03840.x · Cited by 123
Determination of Ice Crystal Size Distributions in Frozen Desserts
Donhowe, D. P., Hartel, R. W., & Bradley, R. L. (1991) · Journal of Dairy Science · doi:10.3168/jds.s0022-0302(91)78521-4 · Cited by 118
Choi, J., & Bischof, J. C. (2009) · Cryobiology · doi:10.1016/j.cryobiol.2009.11.004 · Cited by 118
Srouji, S., Ben‐David, D., Lotan, R., Livne, E., Avrahami, R., & Zussman, E. (2010) · Tissue Engineering Part A · doi:10.1089/ten.tea.2010.0250 · Cited by 115
Green synthesis of chitosan-based nanofibers and their applications
Qian, L., & Zhang, H. (2010) · Green Chemistry · doi:10.1039/b927125b · Cited by 115
Biomedical Applications of Chitosan: An Overview
Ramya, R., Venkatesan, J., Kim, S., & Sudha, P. N. (2012) · Journal of Biomaterials and Tissue Engineering · doi:10.1166/jbt.2012.1030 · Cited by 111
Understanding anisotropy and architecture in ice-templated biopolymer scaffolds
Pawelec, K. M., Husmann, A., Best, S. M., & Cameron, R. E. (2014) · Materials Science and Engineering C · doi:10.1016/j.msec.2014.01.009 · Cited by 106
Anisotropic silk biomaterials containing cardiac extracellular matrix for cardiac tissue engineering
Stoppel, W. L., Hu, D., Domian, I. J., Kaplan, D. L., & Black, L. D. (2015) · Biomedical Materials · doi:10.1088/1748-6041/10/3/034105 · Cited by 105
Naglieri, V., Bale, H., Gludovatz, B., Tomsia, A. P., & Ritchie, R. O. (2013) · Acta Materialia · doi:10.1016/j.actamat.2013.08.006 · Cited by 104
A pore way to heal and regenerate: 21st century thinking on biocompatibility
Ratner, B. D. (2016) · Regenerative Biomaterials · doi:10.1093/rb/rbw006 · Cited by 101
Oriented porous LLZO 3D structures obtained by freeze casting for battery applications
Shen, H., Yi, E., Amores, M., Cheng, L., Tamura, N., Parkinson, D. Y., Chen, G., Chen, K., & Doeff, M. M. (2019) · Journal of Materials Chemistry A · doi:10.1039/c9ta06520b · Cited by 101
Randomized controlled trial on collagen/oxidized regenerated cellulose/silver treatment
Gottrup, F., Cullen, B. M., Karlsmark, T., Bischoff‐Mikkelsen, M., Nisbet, L., & Gibson, M. (2013) · Wound Repair and Regeneration · doi:10.1111/wrr.12020 · Cited by 99
Matsugaki, A., Isobe, Y., Saku, T., & Nakano, T. (2014) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.35189 · Cited by 97
Aligned silk-based 3-D architectures for contact guidance in tissue engineering
Oliveira, A. L., Sun, L., Kim, H. J., Hu, X., Rice, W., Kluge, J. A., Reis, R. L., & Kaplan, D. L. (2011) · Acta Biomaterialia · doi:10.1016/j.actbio.2011.12.015 · Cited by 96
The use of AlloDerm on major burn patients: AlloDerm prevents post-burn joint contracture
Yim, H., Cho, Y. S., Seo, C. H., Lee, B. C., Ko, J. H., Kym, D., Hur, J., Chun, W., & Kim, J. H. (2010) · Burns · doi:10.1016/j.burns.2009.10.018 · Cited by 95
Lord, M. S., Ellis, A. L., Farrugia, B. L., Whitelock, J. M., Grenett, H. E., Li, C., O’Grady, R. L., & DeCarlo, A. A. (2017) · Journal of Controlled Release · doi:10.1016/j.jconrel.2017.02.009 · Cited by 90
Self-citationReview of organic binders for iron ore concentrate agglomeration
Halt, J. A., & Kawatra, S. K. (2014) · Mining Metallurgy & Exploration · doi:10.1007/bf03402417 · Cited by 89
Anisotropic silk fibroin/gelatin scaffolds from unidirectional freezing
Asuncion, M. C. T., Goh, J. C., & Toh, S. (2016) · Materials Science and Engineering C · doi:10.1016/j.msec.2016.05.087 · Cited by 87
Microstructure formation of maltodextrin and sugar matrices in freeze-dried systems
Harnkarnsujarit, N., Charoenrein, S., & Roos, Y. H. (2012) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2012.01.028 · Cited by 83
Bhunia, B. K., Kaplan, D. L., & Mandal, B. B. (2017) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1715912115 · Cited by 82
Lim, K. S., Baptista, M., Moon, S., Woodfield, T. B. F., & Rnjak‐Kovacina, J. (2019) · Trends in biotechnology · doi:10.1016/j.tibtech.2019.04.004 · Cited by 82
Self-citationLee, K. H., Lee, Y.-W., Lee, S. W., Ha, J. S., Lee, S. S., & Son, J. G. (2015) · Scientific Reports · doi:10.1038/srep13696 · Cited by 79
Silk scaffolds with gradient pore structure and improved cell infiltration performance
Huang, L. Q., Huang, J., Shao, H., Hu, X., Cao, C., Fan, S., Song, L., & Zhang, Y. (2018) · Materials Science and Engineering C · doi:10.1016/j.msec.2018.09.034 · Cited by 79
Cellular Geometry Sensing at Different Length Scales and its Implications for Scaffold Design
Werner, M., Kurniawan, N. A., & Bouten, C. V. C. (2020) · Materials · doi:10.3390/ma13040963 · Cited by 76
Salgado, C. L., Grenho, L., Fernandes, M. H., Colaço, B., & Monteiro, F. J. (2015) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.35540 · Cited by 70
Ice Templating and Freeze‐Drying for Porous Materials and Their Applications
Zhang, H. (2018) · Wiley eBooks · doi:10.1002/9783527807390 · Cited by 70
Yetiskin, B., & Okay, O. (2018) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2018.09.087 · Cited by 68
Yin, K., Divakar, P., & Wegst, U. G. K. (2019) · Biomacromolecules · doi:10.1021/acs.biomac.9b00784 · Cited by 68
Prospective study on burns treated with Integra®, a cellulose sponge and split thickness skin graft
Lagus, H., Sarlomo‐Rikala, M., Böhling, T., & Vuola, J. (2013) · Burns · doi:10.1016/j.burns.2013.04.023 · Cited by 67
Preparation of a Dense/Porous BiLayered Ceramic by Applying an Electric Field During Freeze Casting
Zhang, Y., Hu, L., & Han, J. (2009) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2009.03110.x · Cited by 62
Laminar Silk Scaffolds for Aligned Tissue Fabrication
Mandal, B. B., Gil, E. S., Panilaitis, B., & Kaplan, D. L. (2012) · Macromolecular Bioscience · doi:10.1002/mabi.201200230 · Cited by 61
Divakar, P., Yin, K., & Wegst, U. G. K. (2018) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2018.09.012 · Cited by 61
Tailoring the Antimicrobial Response of Cationic Nanocellulose-Based Foams through Cryo-Templating
Otoni, C. G., Figueiredo, J. S. L., Capeletti, L. B., Cardoso, M. B., Bernardes, J. S., & Loh, W. (2019) · ACS Applied Bio Materials · doi:10.1021/acsabm.9b00034 · Cited by 60
Quaife-Ryan, G. A., Mills, R. J., Lavers, G., Voges, H. K., Vivien, C. J., Elliott, D. A., Ramialison, M., Hudson, J. E., & Porrello, E. R. (2020) · Development · doi:10.1242/dev.193417 · Cited by 52
A novel route to polymeric sub-micron fibers and their use as templates for inorganic structures
Qian, L., Willneff, E. A., & Zhang, H. (2009) · Chemical Communications · doi:10.1039/b905130a · Cited by 51
Stuckensen, K., Schwab, A., Knauer, M., Muiños‐López, E., Ehlicke, F., Reboredo, J. W., Granero‐Moltó, F., Gbureck, U., Prósper, F., Walles, H., et al. (2018) · Advanced Materials · doi:10.1002/adma.201706754 · Cited by 51
Mao, M., He, J., Liu, Y., Li, X., & Li, D. (2011) · Acta Biomaterialia · doi:10.1016/j.actbio.2011.12.025 · Cited by 49
Visualizing 3D Food Microstructure Using Tomographic Methods: Advantages and Disadvantages
Wang, Z., Herremans, E., Janssen, S., Cantré, D., Verboven, P., & Nicolaï, B. M. (2018) · Annual Review of Food Science and Technology · doi:10.1146/annurev-food-030117-012639 · Cited by 49
Kundu, B., & Kundu, S. C. (2013) · Biomedical Materials · doi:10.1088/1748-6041/8/5/055003 · Cited by 47
Microporous collagen spheres produced via thermally induced phase separation for tissue regeneration
Keshaw, H., Thapar, N., Burns, A. J., Mordan, N. J., Knowles, J. C., Forbes, A., & Day, R. M. (2009) · Acta Biomaterialia · doi:10.1016/j.actbio.2009.08.044 · Cited by 46
A comparative study of oxygen diffusion in tissue engineering scaffolds
Fiedler, T., Belova, I. V., Murch, G. E., Poologasundarampillai, G., Jones, J. R., Roether, J. A., & Boccaccini, A. R. (2014) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-014-5264-7 · Cited by 43
Lasalle, A., Guizard, C., Leloup, J., Deville, S., Maire, É., Bogner, A., Gauthier, C., Adrien, J., & Courtois, L. (2011) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2011.04993.x · Cited by 40
Haifei, S., Xingang, W., Wu, S.-C., Zhengwei, M., Chuangang, Y., & Chunmao, H. (2013) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2013.08.031 · Cited by 38
Cartilage-like electrostatic stiffening of responsive cryogel scaffolds
Offeddu, G. S., Mela, I., Jeggle, P., Henderson, R. M., Smoukov, S. K., & Oyen, M. L. (2017) · Scientific Reports · doi:10.1038/srep42948 · Cited by 37
Kloeters, O., Unglaub, F., de Laat, E., van Abeelen, M. H. A., & Ulrich, D. J. O. (2015) · International Wound Journal · doi:10.1111/iwj.12449 · Cited by 36
Silk scaffolds for dental tissue engineering
Jindal, S. K., Kiamehr, M., Sun, W., & Yang, X. (2014) · Elsevier eBooks · doi:10.1533/9780857097064.3.403 · Cited by 35
Altering crystal growth and annealing in ice-templated scaffolds
Pawelec, K. M., Husmann, A., Best, S. M., & Cameron, R. E. (2015) · Journal of Materials Science · doi:10.1007/s10853-015-9343-z · Cited by 35
Thakur, G., Mitra, A., Basak, A., & Sheet, D. (2011) · Micron · doi:10.1016/j.micron.2011.09.007 · Cited by 35
Tang, F., Manz, X. D., Bongers, A., Odell, R. A., Joukhdar, H., Whitelock, J. M., Lord, M. S., & Rnjak‐Kovacina, J. (2020) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.9b01624 · Cited by 35
Self-citationInfluence of Stage Cooling Method on Pore Architecture of Biomimetic Alginate Scaffolds
Zhang, Y., Wang, C., Jiang, W., Zuo, W., & Han, G. (2017) · Scientific Reports · doi:10.1038/s41598-017-16024-x · Cited by 34
Directed cell growth and alignment on protein-patterned 3D hydrogels with stereolithography
Chan, V., Collens, M. B., Jeong, J. H., Park, K., Kong, H., & Bashir, R. (2012) · Virtual and Physical Prototyping · doi:10.1080/17452759.2012.709423 · Cited by 31
Characterization of morphology—3D and porous structure
Haugen, H. J., & Bertoldi, S. (2017) · Elsevier eBooks · doi:10.1016/b978-0-08-100737-2.00002-9 · Cited by 31
Zehbe, R., Goebbels, J., Ibold, Y., Gross, U., & Schubert, H. (2009) · Acta Biomaterialia · doi:10.1016/j.actbio.2009.11.020 · Cited by 29
Directional solidification of aqueous TiO2 suspensions under reduced gravity
Scotti, K. L., Emily, E. N., Plunk, A. A., Tappan, B. C., & Dunand, D. C. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.11.038 · Cited by 28
Fundamentals of chitosan-based hydrogels: elaboration and characterization techniques
Batista, R. A., Otoni, C. G., & Espitia, P. J. P. (2019) · Elsevier eBooks · doi:10.1016/b978-0-12-816901-8.00003-1 · Cited by 28
Colloidal assembly by ice templating
Kumaraswamy, G., Biswas, B., & Choudhury, C. K. (2015) · Faraday Discussions · doi:10.1039/c5fd00125k · Cited by 24
Ice-templating of anisotropic structures with high permeability
Pawelec, K. M., van Boxtel, H. A., & Kluijtmans, S. G. J. M. (2017) · Materials Science and Engineering C · doi:10.1016/j.msec.2017.03.142 · Cited by 23
Simultaneous structuring and mineralization of silk fibroin scaffolds
Rödel, M., Baumann, K., Gröll, J., & Gbureck, U. (2018) · Journal of Tissue Engineering · doi:10.1177/2041731418788509 · Cited by 23
Baptista, M., Joukhdar, H., Alcala‐Orozco, C. R., Lau, K., Jiang, S., Cui, X., He, S. Y., Tang, F., Heu, C., Woodfield, T. B. F., et al. (2020) · Biomaterials Science · doi:10.1039/d0bm01010c · Cited by 21
Self-citationDu, K., Zhang, Q., Dan, S., Yang, M., Zhang, Y., & Chai, D. (2016) · Journal of Chromatography A · doi:10.1016/j.chroma.2016.03.026 · Cited by 19
Investigation of structural collapse in unidirectionally freeze cast collagen scaffolds
Clearfield, D., & Wei, M. (2015) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-015-5632-y · Cited by 17
Park, M., Lee, G., Ryu, K., & Lim, W. (2019) · Biotechnology and Bioprocess Engineering · doi:10.1007/s12257-019-0248-6 · Cited by 15
Silk for cardiac tissue engineering
Patra, C., & Engel, F. B. (2014) · Elsevier eBooks · doi:10.1533/9780857097064.3.429 · Cited by 8
Adeleke, O. A., Pillay, V., du Toit, L. C., & Choonara, Y. E. (2010) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2010.02.023 · Cited by 7
Fundamentals of Controlled Freezing for Ice‐templated Porous Materials
Zhang, H. (2018) · Wiley eBooks · doi:10.1002/9783527807390.ch2 · Cited by 1
Cited by
Gel polymer electrolytes for rechargeable batteries toward wide-temperature applications
Zhou, X., Zhou, Y., Yu, L., Qi, L., Oh, K.-S., Hu, P., Lee, S.-Y., & Chen, C. (2024) · Chemical Society Reviews · doi:10.1039/d3cs00551h · Cited by 333
Jamaluddin, M. F. B., Ghosh, A., Ingle, A., Mohammed, R., Ali, A., Bahrami, M., Kaiko, G., Gibb, Z., Filipe, E. C., Cox, T. R., et al. (2022) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.2208040119 · Cited by 84
3D PCL/collagen nanofibrous medical dressing for one-time treatment of diabetic foot ulcers
Chang, T., Yin, H., Yu, X., Wang, L., Fan, L., Xin, J. H., & Yu, H. (2022) · Colloids and Surfaces B: Biointerfaces · doi:10.1016/j.colsurfb.2022.112480 · Cited by 32
Metadata
- Authors
- Joukhdar, H., Seifert, A., Jüngst, T., Groll, J., Lord, M. S., & Rnjak‐Kovacina, J.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2021-07-08
- Volume
- 33
- Issue
- 34
- Pages
- e2100091-e2100091
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W3180109617
- Cited by
- 276
- References
- 131
- FWCI
- 9.58
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.