The DOI matches its Crossref record; 128 of the 128 references it cites were found in a registry or an index.
Multifunctional High Entropy Alloys Enabled by Severe Lattice Distortion
Open accessAbstract
Since 2004, the design of high entropy alloys (HEAs) has generated significant interest within the materials science community due to their exceptional structural and functional properties. By incorporating multiple principal elements into a common lattice, it is possible to create a single‐phase crystal with a highly distorted lattice. This unique feature enables HEAs to offer a promising combination of mechanical and physical properties that are not typically observed in conventional alloys. In this article, an extensive overview of multifunctional HEAs that exhibit severe lattice distortion is provided, covering the theoretical models that are developed to understand lattice distortion, the experimental and computational methods employ to characterize lattice distortion, and most importantly, the impact of severe lattice distortion on the mechanical, physical and electrochemical properties of HEAs. Through this review, it is hoped to stimulate further research into the study of distorted lattices in crystalline solids.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Yeh, J. ‐., Chen, S. ‐., Lin, S. ‐., Gan, J. ‐., Chin, T. ‐., Shun, T. ‐., Tsau, C. ‐., & Chang, S. ‐. (2004) · Advanced Engineering Materials · doi:10.1002/adem.200300567 · Cited by 15,281
The determination of the elastic field of an ellipsoidal inclusion, and related problems
Eshelby, J. D. (1957) · Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences · doi:10.1098/rspa.1957.0133 · Cited by 13,026
Microstructural development in equiatomic multicomponent alloys
Cantor, B., Chang, I. T. H., Knight, P., & Vincent, A. J. B. (2004) · Materials Science and Engineering: A · doi:10.1016/j.msea.2003.10.257 · Cited by 10,130
Materials science and engineering: An introduction
Clayton, C. R. (1987) · Materials Science and Engineering · doi:10.1016/0025-5416(87)90343-0 · Cited by 5,925
A fracture-resistant high-entropy alloy for cryogenic applications
Gludovatz, B., Hohenwarter, A., Catoor, D., Chang, E. H., George, E. P., & Ritchie, R. O. (2014) · Science · doi:10.1126/science.1254581 · Cited by 5,714
George, E. P., Raabe, D., & Ritchie, R. O. (2019) · Nature Reviews Materials · doi:10.1038/s41578-019-0121-4 · Cited by 5,047
A review of shape memory alloy research, applications and opportunities
Mohd Jani, J., Leary, M., Subic, A., & Gibson, M. A. (2014) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2013.11.084 · Cited by 4,078
High-Entropy Alloys: A Critical Review
Tsai, M.-H., & Yeh, J.-W. (2014) · Materials Research Letters · doi:10.1080/21663831.2014.912690 · Cited by 3,477
Solid‐Solution Phase Formation Rules for Multi‐component Alloys
Zhang, Y., Zhou, Y. J., Lin, J. P., Chen, G. L., & Liaw, P. K. (2008) · Advanced Engineering Materials · doi:10.1002/adem.200700240 · Cited by 3,466
High-entropy alloy: challenges and prospects
Ye, Y. F., Wang, Q., Lu, J., Liu, C. T., & Yang, Y. (2016) · Materials Today · doi:10.1016/j.mattod.2015.11.026 · Cited by 3,016
Self-citationQuantitative measurement of displacement and strain fields from HREM micrographs
Hÿtch, M. J., Snoeck, E., & Kilaas, R. (1998) · Ultramicroscopy · doi:10.1016/s0304-3991(98)00035-7 · Cited by 2,752
Phase stability in high entropy alloys: Formation of solid-solution phase or amorphous phase
GUO, S., & LIU, C. T. (2011) · Progress in Natural Science: Materials International · doi:10.1016/s1002-0071(12)60080-x · Cited by 2,534
Sluggish diffusion in Co–Cr–Fe–Mn–Ni high-entropy alloys
Tsai, K.-Y., Tsai, M.-H., & Yeh, J.-W. (2013) · Acta Materialia · doi:10.1016/j.actamat.2013.04.058 · Cited by 2,366
Wu, Z., Bei, H., Pharr, G. M., & George, E. P. (2014) · Acta Materialia · doi:10.1016/j.actamat.2014.08.026 · Cited by 2,134
Recent progress in high-entropy alloys
Yeh, J.-W. (2006) · Annales de Chimie Science des Matériaux · doi:10.3166/acsm.31.633-648 · Cited by 2,117
High entropy alloys: A focused review of mechanical properties and deformation mechanisms
George, E. P., Curtin, W. A., & Tasan, C. C. (2020) · Acta Materialia · doi:10.1016/j.actamat.2019.12.015 · Cited by 1,917
Alloy Design Strategies and Future Trends in High-Entropy Alloys
Yeh, J.-W. (2013) · JOM · doi:10.1007/s11837-013-0761-6 · Cited by 1,786
Plasticity in small-sized metallic systems: Intrinsic versus extrinsic size effect
Greer, J. R., & De Hosson, J. T. M. (2011) · Progress in Materials Science · doi:10.1016/j.pmatsci.2011.01.005 · Cited by 1,763
Multicomponent intermetallic nanoparticles and superb mechanical behaviors of complex alloys
Yang, T., Zhao, Y. L., Tong, Y., Jiao, Z. B., Wei, J., Cai, J. X., Han, X. D., Chen, D., Hu, A., Kai, J. J., et al. (2018) · Science · doi:10.1126/science.aas8815 · Cited by 1,684
Tuning element distribution, structure and properties by composition in high-entropy alloys
Ding, Q., Zhang, Y., Chen, X., Fu, X., Chen, D., Chen, S., Gu, L., Wei, F., Bei, H., Gao, Y., et al. (2019) · Nature · doi:10.1038/s41586-019-1617-1 · Cited by 1,614
A Statistical Theory of Solid Solution Hardening
Labusch, R. (1970) · physica status solidi (b) · doi:10.1002/pssb.19700410221 · Cited by 1,439
Mechanical behavior of high-entropy alloys
Li, W., Xie, D., Li, D., Zhang, Y., Gao, Y., & Liaw, P. K. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2021.100777 · Cited by 1,321
Substitutional solution hardening
Fleischer, R. L. (1963) · Acta Metallurgica · doi:10.1016/0001-6160(63)90213-x · Cited by 1,281
Short-range order and its impact on the CrCoNi medium-entropy alloy
Zhang, R., Zhao, S., Ding, J., Chong, Y., Jia, T., Ophus, C., Asta, M., Ritchie, R. O., & Minor, A. M. (2020) · Nature · doi:10.1038/s41586-020-2275-z · Cited by 1,279
High-entropy-stabilized chalcogenides with high thermoelectric performance
Jiang, B., Yu, Y., Cui, J., Liu, X., Xie, L., Liao, J., Zhang, Q., Huang, Y., Ning, S., Jia, B., et al. (2021) · Science · doi:10.1126/science.abe1292 · Cited by 1,173
Lattice Thermal Conductivity of Disordered Semiconductor Alloys at High Temperatures
Abeles, B. (1963) · Physical Review · doi:10.1103/physrev.131.1906 · Cited by 1,148
Strain-controlled electrocatalysis on multimetallic nanomaterials
Luo, M., & Guo, S. (2017) · Nature Reviews Materials · doi:10.1038/natrevmats.2017.59 · Cited by 1,115
Ductile CoCrFeNiMox high entropy alloys strengthened by hard intermetallic phases
Liu, W. H., Lu, Z. P., He, J. Y., Luan, J. H., Wang, Z. J., Liu, B., Liu, Y., Chen, M. W., & Liu, C. T. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.06.063 · Cited by 1,064
High-entropy alloys: a critical assessment of their founding principles and future prospects
Pickering, E. J., & Jones, N. G. (2016) · International Materials Reviews · doi:10.1080/09506608.2016.1180020 · Cited by 1,062
High-Entropy Alloys as a Discovery Platform for Electrocatalysis
Batchelor, T. A. A., Pedersen, J. K., Winther, S. H., Castelli, I. E., Jacobsen, K. W., & Rossmeisl, J. (2019) · Joule · doi:10.1016/j.joule.2018.12.015 · Cited by 982
High-entropy materials for catalysis: A new frontier
Sun, Y., & Dai, S. (2021) · Science Advances · doi:10.1126/sciadv.abg1600 · Cited by 942
Multifunctional Alloys Obtained via a Dislocation-Free Plastic Deformation Mechanism
Saito, T., Furuta, T., Hwang, J.-H., Kuramoto, S., Nishino, K., Suzuki, N., Chen, R., Yamada, A., Ito, K., Seno, Y., et al. (2003) · Science · doi:10.1126/science.1081957 · Cited by 935
Theory of strengthening in fcc high entropy alloys
Varvenne, C., Luque, A., & Curtin, W. A. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.07.040 · Cited by 908
High-Entropy Alloys as a Platform for Catalysis: Progress, Challenges, and Opportunities
Xin, Y., Li, S., Qian, Y., Zhu, W., Yuan, H., Jiang, P., Guo, R., & Wang, L. (2020) · ACS Catalysis · doi:10.1021/acscatal.0c03617 · Cited by 840
Self-citationPhonon-engineered extreme thermal conductivity materials
Qian, X., Zhou, J., & Chen, G. (2021) · Nature Materials · doi:10.1038/s41563-021-00918-3 · Cited by 837
Lu, C., Niu, L., Chen, N., Jin, K., Yang, T., Xiu, P., Zhang, Y., Gao, F., Bei, H., Shi, S., et al. (2016) · Nature Communications · doi:10.1038/ncomms13564 · Cited by 822
Direct observation of chemical short-range order in a medium-entropy alloy
Chen, X., Wang, Q., Cheng, Z., Zhu, M., Zhou, H., Jiang, P., Zhou, L., Xue, Q., Yuan, F., Zhu, J., et al. (2021) · Nature · doi:10.1038/s41586-021-03428-z · Cited by 819
Li, Q.-J., Sheng, H., & Ma, E. (2019) · Nature Communications · doi:10.1038/s41467-019-11464-7 · Cited by 795
Enhancing Electrocatalytic Water Splitting by Strain Engineering
You, B., Tang, M. T., Tsai, C., Abild‐Pedersen, F., Zheng, X., & Li, H. (2019) · Advanced Materials · doi:10.1002/adma.201807001 · Cited by 793
(2016) · Springer eBooks · doi:10.1007/978-3-319-27013-5 · Cited by 759
Yeh, J.-W., Chang, S.-Y., Hong, Y.-D., Chen, S.-K., & Lin, S.-J. (2007) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2007.01.003 · Cited by 742
High figure-of-merit and power generation in high-entropy GeTe-based thermoelectrics
Jiang, B., Wang, W., Liu, S., Wang, Y., Wang, C., Chen, Y., Xie, L., Huang, M., & He, J. (2022) · Science · doi:10.1126/science.abq5815 · Cited by 729
Santodonato, L. J., Zhang, Y., Feygenson, M., Parish, C. M., Gao, M. C., Weber, R. J. K., Neuefeind, J. C., Tang, Z., & Liaw, P. K. (2015) · Nature Communications · doi:10.1038/ncomms6964 · Cited by 708
Outstanding radiation resistance of tungsten-based high-entropy alloys
El-Atwani, O., Li, N., Li, M., Devaraj, A., Baldwin, J. K. S., Schneider, M. M., Sobieraj, D., Wróbel, J. S., Nguyen-Manh, D., Maloy, S. A., et al. (2019) · Science Advances · doi:10.1126/sciadv.aav2002 · Cited by 658
Ultrastrong Medium‐Entropy Single‐Phase Alloys Designed via Severe Lattice Distortion
Sohn, S. S., da Silva, A. K., Ikeda, Y., Körmann, F., Lu, W., Choi, W. S., Gault, B., Ponge, D., Neugebauer, J., & Raabe, D. (2018) · Advanced Materials · doi:10.1002/adma.201807142 · Cited by 632
Lattice distortion in a strong and ductile refractory high-entropy alloy
Lee, C., Song, G., Gao, M. C., Feng, R., Chen, P., Brechtl, J., Chen, Y., An, K., Guo, W., Poplawsky, J. D., et al. (2018) · Acta Materialia · doi:10.1016/j.actamat.2018.08.053 · Cited by 622
High-entropy mechanism to boost ionic conductivity
Zeng, Y., Ouyang, B., Liu, J., Byeon, Y.-W., Cai, Z., Miara, L. J., Wang, Y., & Ceder, G. (2022) · Science · doi:10.1126/science.abq1346 · Cited by 558
Ferrous Polycrystalline Shape-Memory Alloy Showing Huge Superelasticity
Tanaka, Y., Himuro, Y., Kainuma, R., Sutou, Y., Omori, T., & Ishida, K. (2010) · Science · doi:10.1126/science.1183169 · Cited by 545
Mechanistic origin of high strength in refractory BCC high entropy alloys up to 1900K
Maresca, F., & Curtin, W. A. (2020) · Acta Materialia · doi:10.1016/j.actamat.2019.10.015 · Cited by 508
Physical Metallurgy of High-Entropy Alloys
Yeh, J.-W. (2015) · JOM · doi:10.1007/s11837-015-1583-5 · Cited by 488
Superelastic Effect in Polycrystalline Ferrous Alloys
Omori, T., Ando, K., Okano, M., Xu, X., Tanaka, Y., Ohnuma, I., Kainuma, R., & Ishida, K. (2011) · Science · doi:10.1126/science.1202232 · Cited by 461
Activating cobalt(II) oxide nanorods for efficient electrocatalysis by strain engineering
Ling, T., Yan, D.-Y., Wang, H., Jiao, Y., Hu, Z., Zheng, Y., Zheng, L., Mao, J., Liu, H., Du, X.-W., et al. (2017) · Nature Communications · doi:10.1038/s41467-017-01872-y · Cited by 450
Self-citationHigh-Entropy Alloys as Catalysts for the CO2 and CO Reduction Reactions: Experimental Realization
Nellaiappan, S., Katiyar, N. K., Kumar, R., Parui, A., Malviya, K. D., Pradeep, K. G., Singh, A. K., Sharma, S., Tiwary, C. S., & Biswas, K. (2020) · ACS Catalysis · doi:10.1021/acscatal.9b04302 · Cited by 447
Solute strengthening in random alloys
Varvenne, C., Leyson, G. P. M., Ghazisaeidi, M., & Curtin, W. A. (2017) · Acta Materialia · doi:10.1016/j.actamat.2016.09.046 · Cited by 427
Jin, Z., Lv, J., Jia, H., Liu, W., Li, H., Chen, Z., Lin, X., Xie, G., Liu, X., Sun, S., et al. (2019) · Small · doi:10.1002/smll.201904180 · Cited by 425
Self-citationJian, W.-R., Xie, Z., Xu, S., Su, Y., Yao, X., & Beyerlein, I. J. (2020) · Acta Materialia · doi:10.1016/j.actamat.2020.08.044 · Cited by 417
Short-range ordering and its effects on mechanical properties of high-entropy alloys
Wu, Y., Zhang, F., Yuan, X., Huang, H., Wen, X., Wang, Y., Zhang, M., Wu, H., Liu, X., Wang, H., et al. (2021) · Journal of Materials Science & Technology · doi:10.1016/j.jmst.2020.06.018 · Cited by 414
Self-citationA promising new class of irradiation tolerant materials: Ti2ZrHfV0.5Mo0.2 high-entropy alloy
Lu, Y., Huang, H., Gao, X., Ren, C., Gao, J., Zhang, H., Zheng, S., Jin, Q., Zhao, Y., Lu, C., et al. (2019) · Journal of Materials Science & Technology · doi:10.1016/j.jmst.2018.09.034 · Cited by 405
Self-citationFleisgher, R. L. (1961) · Acta Metallurgica · doi:10.1016/0001-6160(61)90242-5 · Cited by 382
Local lattice distortion in high-entropy alloys
Song, H., Tian, F., Hu, Q.-M., Vitos, L., Wang, Y., Shen, J., & Chen, N. (2017) · Physical Review Materials · doi:10.1103/physrevmaterials.1.023404 · Cited by 378
Jin, K., Lu, C., Wang, L. M., Qu, J., Weber, W. J., Zhang, Y., & Bei, H. (2016) · Scripta Materialia · doi:10.1016/j.scriptamat.2016.03.030 · Cited by 368
Nanoporous high-entropy alloys for highly stable and efficient catalysts
Qiu, H.-J., Fang, G., Wen, Y., Liu, P., Xie, G., Liu, X., & Sun, S. (2019) · Journal of Materials Chemistry A · doi:10.1039/c9ta00505f · Cited by 364
Multiplicity of dislocation pathways in a refractory multiprincipal element alloy
Wang, F., Balbus, G. H., Xu, S., Su, Y., Shin, J., Rottmann, P. F., Knipling, K. E., Stinville, J.-C., Mills, L. H., Senkov, O. N., et al. (2020) · Science · doi:10.1126/science.aba3722 · Cited by 361
Wang, L., Ding, J., Chen, S., Jin, K., Zhang, Q., Cui, J., Wang, B., Chen, B., Li, T., Ren, Y., et al. (2023) · Nature Materials · doi:10.1038/s41563-023-01517-0 · Cited by 361
A Novel Multinary Intermetallic as an Active Electrocatalyst for Hydrogen Evolution
Jia, Z., Yang, T., Sun, L., Zhao, Y., Li, W., Luan, J., Lyu, F., Zhang, L., Kruzic, J. J., Kai, J., et al. (2020) · Advanced Materials · doi:10.1002/adma.202000385 · Cited by 356
Liu, R., Zhang, C., Nassehi, A., & Newman, S. (2006) · Cited by 356
An assessment of the lattice strain in the CrMnFeCoNi high-entropy alloy
Owen, L. R., Pickering, E. J., Playford, H. Y., Stone, H. J., Tucker, M. G., & Jones, N. G. (2017) · Acta Materialia · doi:10.1016/j.actamat.2016.09.032 · Cited by 338
Machine learning guided appraisal and exploration of phase design for high entropy alloys
Zhou, Z., Zhou, Y., He, Q., Ding, Z., Li, F., & Yang, Y. (2019) · npj Computational Materials · doi:10.1038/s41524-019-0265-1 · Cited by 327
Self-citationYao, R., Zhou, Y., Shi, H., Wan, W., Zhang, Q., Gu, L., Zhu, Y., Wen, Z., Lang, X., & Jiang, Q. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202009613 · Cited by 321
Lattice‐Distortion‐Enhanced Yield Strength in a Refractory High‐Entropy Alloy
Lee, C., Chou, Y., Kim, G., Gao, M. C., An, K., Brechtl, J., Zhang, C., Chen, W., Poplawsky, J. D., Song, G., et al. (2020) · Advanced Materials · doi:10.1002/adma.202004029 · Cited by 318
Yield strength and misfit volumes of NiCoCr and implications for short-range-order
Yin, B., Yoshida, S., Tsuji, N., & Curtin, W. A. (2020) · Nature Communications · doi:10.1038/s41467-020-16083-1 · Cited by 311
Theory of screw dislocation strengthening in random BCC alloys from dilute to “High-Entropy” alloys
Maresca, F., & Curtin, W. A. (2020) · Acta Materialia · doi:10.1016/j.actamat.2019.10.007 · Cited by 310
Okamoto, N. L., Yuge, K., Tanaka, K., Inui, H., & George, E. P. (2016) · AIP Advances · doi:10.1063/1.4971371 · Cited by 274
Hu, L., Zhang, Y., Wu, H., Li, J., Li, Y., Mckenna, M., He, J., Liu, F., Pennycook, S. J., & Zeng, X. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201802116 · Cited by 266
Strain mapping at nanometer resolution using advanced nano-beam electron diffraction
Özdöl, V. B., Gammer, C., Jin, X., Ercius, P. A., Ophus, C., Ciston, J., & Minor, A. M. (2015) · Applied Physics Letters · doi:10.1063/1.4922994 · Cited by 225
Local Atomic Structure of a High-Entropy Alloy: An X-Ray and Neutron Scattering Study
Guo, W., Dmowski, W., Noh, J.-Y., Rack, P., Liaw, P. K., & Egami, T. (2013) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-012-1474-0 · Cited by 225
Lattice Distortions in the FeCoNiCrMn High Entropy Alloy Studied by Theory and Experiment
Oh, H., Ma, D., Leyson, G., Grabowski, B., Park, E., Körmann, F., & Raabe, D. (2016) · Entropy · doi:10.3390/e18090321 · Cited by 213
Ding, Z., Bian, J., Shuang, S., Liu, X., Hu, Y., Sun, C., & Yang, Y. (2020) · Advanced Sustainable Systems · doi:10.1002/adsu.201900105 · Cited by 213
Self-citationA geometric model for intrinsic residual strain and phase stability in high entropy alloys
Ye, Y. F., Liu, C. T., & Yang, Y. (2015) · Acta Materialia · doi:10.1016/j.actamat.2015.04.051 · Cited by 205
Self-citationKim, G., Diao, H., Lee, C., Samaei, A. T., Phan, T., de Jong, M., An, K., Ma, D., Liaw, P. K., & Chen, W. (2019) · Acta Materialia · doi:10.1016/j.actamat.2019.09.026 · Cited by 205
de Assis, R. R., Jain, A., Nakajima, R., Jasinskas, A., Felgner, J., Obiero, J. M., Norris, P. J., Stone, M., Simmons, G., Bagri, A., et al. (2021) · Nature Communications · doi:10.1038/s41467-020-20095-2 · Cited by 205
Phase Selection, Lattice Distortions, and Mechanical Properties in High‐Entropy Alloys
Nutor, R. K., Cao, Q., Wang, X., Zhang, D., Fang, Y., Zhang, Y., & Jiang, J.-Z. (2020) · Advanced Engineering Materials · doi:10.1002/adem.202000466 · Cited by 204
Jia, Z., Nomoto, K., Wang, Q., Kong, C., Sun, L., Zhang, L., Liang, S., Lu, J., & Kruzic, J. J. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202101586 · Cited by 203
Average-atom interatomic potential for random alloys
Varvenne, C., Luque, A., Nöhring, W. G., & Curtin, W. A. (2016) · Physical review. B./Physical review. B · doi:10.1103/physrevb.93.104201 · Cited by 197
Shape Memory Effect and Superelasticity in a Strain Glass Alloy
Wang, Y., Ren, X., & Otsuka, K. (2006) · Physical Review Letters · doi:10.1103/physrevlett.97.225703 · Cited by 193
Tong, Y., Zhao, S., Bei, H., Egami, T., Zhang, Y., & Zhang, F. (2020) · Acta Materialia · doi:10.1016/j.actamat.2019.11.026 · Cited by 191
Schnur, S., & Groß, A. (2010) · Physical Review B · doi:10.1103/physrevb.81.033402 · Cited by 189
A highly distorted ultraelastic chemically complex Elinvar alloy
He, Q. F., Wang, J. G., Chen, H. A., Ding, Z. Y., Zhou, Z. Q., Xiong, L. H., Luan, J. H., Pelletier, J. M., Qiao, J. C., Wang, Q., et al. (2022) · Nature · doi:10.1038/s41586-021-04309-1 · Cited by 184
Self-citationIdentifying and Correcting Scan Noise and Drift in the Scanning Transmission Electron Microscope
Jones, L., & Nellist, P. D. (2013) · Microscopy and Microanalysis · doi:10.1017/s1431927613001402 · Cited by 182
Development of a novel high-entropy alloy with eminent efficiency of degrading azo dye solutions
Lv, Z. Y., Liu, X. J., Jia, B., Wang, H., Wu, Y., & Lu, Z. P. (2016) · Scientific Reports · doi:10.1038/srep34213 · Cited by 182
Self-citation(2001) · Alloying · doi:10.31399/asm.tb.aub.t61170457 · Cited by 182
A general approach to high-entropy metallic nanowire electrocatalysts
Sun, Y., Zhang, W., Zhang, Q., Li, Y., Gu, L., & Guo, S. (2023) · Matter · doi:10.1016/j.matt.2022.09.023 · Cited by 182
The effects of irradiation on CrMnFeCoNi high-entropy alloy and its derivatives
Zhang, Z., Armstrong, D. E. J., & Grant, P. S. (2022) · Progress in Materials Science · doi:10.1016/j.pmatsci.2021.100807 · Cited by 174
Lattice distortions in high-entropy alloys
Owen, L. R., & Jones, N. G. (2018) · Journal of Materials Research · doi:10.1557/jmr.2018.322 · Cited by 173
Rao, S. I., Akdim, B., Antillon, E. A., Woodward, C. F., Parthasarathy, T. A., & Senkov, O. N. (2019) · Acta Materialia · doi:10.1016/j.actamat.2019.02.013 · Cited by 171
Zhao, S. (2020) · Journal of Materials Science & Technology · doi:10.1016/j.jmst.2019.10.025 · Cited by 162
Tong, Y., Jin, K., Bei, H., Ko, J. Y. P., Pagan, D. C., Zhang, Y., & Zhang, F. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.05.056 · Cited by 159
Thermoelectric high-entropy alloys with low lattice thermal conductivity
Fan, Z., Wang, H., Wu, Y., Liu, X., & Lü, Z. (2016) · RSC Advances · doi:10.1039/c5ra28088e · Cited by 155
Self-citationCooper, D., Denneulin, T., Bernier, N., Béché, A., & Rouvière, J. (2015) · Micron · doi:10.1016/j.micron.2015.09.001 · Cited by 151
Tajuddin, A. A. H., Wakisaka, M., Ohto, T., Yu, Y., Fukushima, H., Tanimoto, H., Li, X., Misu, Y., Jeong, S., Fujita, J., et al. (2022) · Advanced Materials · doi:10.1002/adma.202207466 · Cited by 151
Measuring Lattice Strain in Three Dimensions through Electron Microscopy
Goris, B., Beenhouwer, J. D., Backer, A. D., Zanaga, D., Batenburg, K. J., Sánchez‐Iglesias, A., Liz‐Marzán, L. M., Aert, S. V., Bals, S., Sijbers, J., et al. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b03008 · Cited by 150
Béché, A., Rouvière, J., Barnes, J., & Cooper, D. (2013) · Ultramicroscopy · doi:10.1016/j.ultramic.2013.03.014 · Cited by 150
Ion irradiation response and mechanical behavior of reduced activity high entropy alloy
Sadeghilaridjani, M., Ayyagari, A. V., Muskeri, S., Hasannaeimi, V., Salloom, R., Chen, W., & Mukherjee, S. (2019) · Journal of Nuclear Materials · doi:10.1016/j.jnucmat.2019.151955 · Cited by 147
First-principles-based prediction of yield strength in the RhIrPdPtNiCu high-entropy alloy
Yin, B., & Curtin, W. A. (2019) · npj Computational Materials · doi:10.1038/s41524-019-0151-x · Cited by 140
Song, R., Han, J., Okugawa, M., Belosludov, R. V., Wada, T., Jiang, J., Wei, D., Kudo, A., Tian, Y., Chen, M. W., et al. (2022) · Nature Communications · doi:10.1038/s41467-022-32768-1 · Cited by 130
Design of High-Entropy Alloy: A Perspective from Nonideal Mixing
He, Q., Ding, Z., Ye, Y. F., & Yang, Y. G. (2017) · JOM · doi:10.1007/s11837-017-2452-1 · Cited by 127
Self-citationZhao, S., Egami, T., Stocks, G. M., & Zhang, Y. (2018) · Physical Review Materials · doi:10.1103/physrevmaterials.2.013602 · Cited by 127
Mining of lattice distortion, strength, and intrinsic ductility of refractory high entropy alloys
Tandoc, C., Hu, Y., Qi, L., & Liaw, P. K. (2023) · npj Computational Materials · doi:10.1038/s41524-023-00993-x · Cited by 127
Ren, Y., & Zuo, X. (2018) · Small Methods · doi:10.1002/smtd.201800064 · Cited by 126
Electrocatalytic activity of high-entropy alloys toward oxygen evolution reaction
Cui, X., Zhang, B., Zeng, C., & Guo, S. (2018) · MRS Communications · doi:10.1557/mrc.2018.111 · Cited by 124
Heterogeneous lattice strain strengthening in severely distorted crystalline solids
Li, J., Chen, Y., He, Q., Xu, X., Wang, H., Jiang, C., Liu, B., Fang, Q., Liu, Y., Yang, Y. G., et al. (2022) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.2200607119 · Cited by 118
Self-citationHe, Q., Tang, P.-H., Chen, H., Lan, S., Wang, J. G., Luan, J., Du, M., Liu, Y., Liu, C. T., Pao, C., et al. (2021) · Acta Materialia · doi:10.1016/j.actamat.2021.117140 · Cited by 116
Self-citationEvolution of local lattice distortion under irradiation in medium- and high-entropy alloys
Tong, Y., Velişa, G., Zhao, S., Guo, W. H., Yang, T., Jin, K., Lu, C., Bei, H., Ko, J. Y. P., Pagan, D. C., et al. (2018) · Materialia · doi:10.1016/j.mtla.2018.06.008 · Cited by 101
Li, R., Liu, X., Liu, W., Li, Z., Chan, K. C., & Lu, Z. (2022) · Advanced Science · doi:10.1002/advs.202105808 · Cited by 100
Chemical short-range orders in high-/medium-entropy alloys
Wu, X. (2022) · Journal of Material Science and Technology · doi:10.1016/j.jmst.2022.10.070 · Cited by 100
Short-range chemical order and local lattice distortion in a compositionally complex alloy
Fantin, A., Lepore, G. O., Manzoni, A. M., Kasatikov, S., Scherb, T., Huthwelker, T., d’Acapito, F., & Schumacher, G. (2020) · Acta Materialia · doi:10.1016/j.actamat.2020.04.034 · Cited by 95
Thermal physical properties of high entropy alloy Al0.3CoCrFeNi at elevated temperatures
Sun, Z., Shi, C., Gao, L., Lin, S., & Li, W. (2022) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2021.163554 · Cited by 95
Experimental quantum fingerprinting with weak coherent pulses
Xu, F., Arrazola, J. M., Wei, K., Wang, W., Palacios-Avila, P., Feng, C., Sajeed, S., Lütkenhaus, N., & Lo, H. (2015) · Nature Communications · doi:10.1038/ncomms9735 · Cited by 94
Jin, K., & Bei, H. (2018) · Frontiers in Materials · doi:10.3389/fmats.2018.00026 · Cited by 70
Study on irradiation effects of refractory bcc high-entropy alloy
Zong, Y., Hashimoto, N. T., & Oka, H. (2022) · Nuclear Materials and Energy · doi:10.1016/j.nme.2022.101158 · Cited by 68
Shkodich, N. F., Kuskov, K., Sedegov, A. S., Ковалев, И. Д., Panteleeva, A. V., Vergunova, Y. S., Scheck, Y. B., Panina, E., Stepanov, N., Serhiienko, I., et al. (2021) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2021.162030 · Cited by 67
Chen, Y., Wang, S., Feng, H., Li, W., Liu, B., Li, J., Liu, Y., Liaw, P. K., & Fang, Q. (2023) · International Journal of Plasticity · doi:10.1016/j.ijplas.2022.103497 · Cited by 55
Non-Hookean large elastic deformation in bulk crystalline metals
Xu, S., Odaira, T., Sato, S. A., Xu, X., Omori, T., Harjo, S., Kawasaki, T., Seiner, H. S., Zoubková, K., Murakami, Y., et al. (2022) · Nature Communications · doi:10.1038/s41467-022-32930-9 · Cited by 40
Huang, J., Fang, W., Xue, C., Peng, T., Yu, H., Li, J., Sun, L., He, X., Liu, B., Yang, Y. G., et al. (2023) · Computational Materials Science · doi:10.1016/j.commatsci.2023.112089 · Cited by 36
Self-citationElectron microscopy by specimen design: application to strain measurements
Cherkashin, N. A., Denneulin, T., & Hÿtch, M. (2017) · Scientific Reports · doi:10.1038/s41598-017-12695-8 · Cited by 25
Large area strain analysis using scanning transmission electron microscopy across multiple images
Oni, A. A., Sang, X., Raju, S. V., Santoshrupa Dumpala, A., Broderick, S., Kumar, A., Sinnott, S. B., Saxena, S. K., Rajan, K., & LeBeau, J. M. (2015) · Applied Physics Letters · doi:10.1063/1.4905368 · Cited by 23
Irradiation Behaviors in BCC Multi-Component Alloys with Different Lattice Distortions
Su, Y., Xia, S., Huang, J., Liu, Q., Liu, H., Wang, C., & Wang, Y. (2021) · Metals · doi:10.3390/met11050706 · Cited by 21
Zhao, Y.-P., Dou, Y., He, X., Deng, H., Wang, L., & Yang, W. L. (2022) · Computational Materials Science · doi:10.1016/j.commatsci.2022.111943 · Cited by 21
Cited by
High-entropy alloy electrocatalysts go to (sub-)nanoscale
Li, M., Lin, F., Zhang, S., Zhao, R., Tao, L., Li, L., Li, J., Zeng, L., Luo, M., & Guo, S. (2024) · Science Advances · doi:10.1126/sciadv.adn2877 · Cited by 177
Metadata
- Authors
- Wang, H., He, Q., Gao, X., Shang, Y., Zhu, W., Zhao, W., Chen, Z., Gong, H., & Yang, Y.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2023-11-30
- Volume
- 36
- Issue
- 17
- Pages
- e2305453-e2305453
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W4385737596
- Cited by
- 326
- References
- 128
- FWCI
- 32.06
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.