Cited by 586

The DOI matches its Crossref record; 116 of the 116 references it cites were found in a registry or an index.

Polyanion‐Type Electrode Materials for Sodium‐Ion Batteries

Open access

Ni, Qiao, Bai, Ying, Wu, Feng, Wu, Chuan·2017·Advanced Science

DOI 10.1002/advs.201600275

Open this paper in CoChat — free account

Abstract

Sodium‐ion batteries, representative members of the post‐lithium‐battery club, are very attractive and promising for large‐scale energy storage applications. The increasing technological improvements in sodium‐ion batteries (Na‐ion batteries) are being driven by the demand for Na‐based electrode materials that are resource‐abundant, cost‐effective, and long lasting. Polyanion‐type compounds are among the most promising electrode materials for Na‐ion batteries due to their stability, safety, and suitable operating voltages. The most representative polyanion‐type electrode materials are Na 3 V 2(PO 4)3 and NaTi 2(PO 4)3 for Na‐based cathode and anode materials, respectively. Both show superior electrochemical properties and attractive prospects in terms of their development and application in Na‐ion batteries. Carbonophosphate Na 3 MnCO 3 PO 4 and amorphous FePO 4 have also recently emerged and are contributing to further developing the research scope of polyanion‐type Na‐ion batteries. However, the typical low conductivity and relatively low capacity performance of such materials still restrict their development. This paper presents a brief review of the research progress of polyanion‐type electrode materials for Na‐ion batteries, summarizing recent accomplishments, highlighting emerging strategies, and discussing the remaining challenges of such systems.

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

Integrity signals

Registry

Crossref · 10.1002/advs.201600275

Cites

116 of 116 references verified0 citation errors · 0 not checkable

Statistics

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Phospho‐olivines as Positive‐Electrode Materials for Rechargeable Lithium Batteries
Padhi, A. K., Nanjundaswamy, K. S., & Goodenough, J. B. (1997) · Journal of The Electrochemical Society · doi:10.1149/1.1837571 · Cited by 7,933
Towards greener and more sustainable batteries for electrical energy storage
Larcher, D., & Tarascon, J.-M. (2015) · Nature Chemistry · doi:10.1038/nchem.2085 · Cited by 7,872
Research Development on Sodium-Ion Batteries
Yabuuchi, N., Kubota, K., Dahbi, M., & Komaba, S. (2014) · Chemical Reviews · doi:10.1021/cr500192f · Cited by 6,478
Electronically conductive phospho-olivines as lithium storage electrodes
Chung, S.-Y., Bloking, J. T., & Chiang, Y.-M. (2002) · Nature Materials · doi:10.1038/nmat732 · Cited by 2,939
Fast Na+-ion transport in skeleton structures
Goodenough, J. B., Hong, H. Y.-P., & Kafalas, J. A. (1976) · Materials Research Bulletin · doi:10.1016/0025-5408(76)90077-5 · Cited by 2,284
Electrochemical Na Insertion and Solid Electrolyte Interphase for Hard‐Carbon Electrodes and Application to Na‐Ion Batteries
Komaba, S., Murata, W., Ishikawa, T., Yabuuchi, N., Ozeki, T., Nakayama, T., Ogata, A., Gotoh, K., & Fujiwara, K. (2011) · Advanced Functional Materials · doi:10.1002/adfm.201100854 · Cited by 2,116
The Emerging Chemistry of Sodium Ion Batteries for Electrochemical Energy Storage
Kundu, D., Talaie, E., Duffort, V., & Nazar, L. F. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201410376 · Cited by 2,068
Carbon nanotubule membranes for electrochemical energy storage and production
Che, G., Lakshmi, B. B., Fisher, E. R., & Martin, C. R. (1998) · Nature · doi:10.1038/30694 · Cited by 1,767
Unlocking the Potential of Cation-Disordered Oxides for Rechargeable Lithium Batteries
Lee, J., Urban, A., Li, X., Su, D., Hautier, G., & Ceder, G. (2014) · Science · doi:10.1126/science.1246432 · Cited by 1,248
Recent Advances and Prospects of Cathode Materials for Sodium‐Ion Batteries
Xiang, X., Zhang, K., & Chen, J. (2015) · Advanced Materials · doi:10.1002/adma.201501527 · Cited by 1,160
Is lithium the new gold?
Tarascon, J.-M. (2010) · Nature Chemistry · doi:10.1038/nchem.680 · Cited by 1,157
Superionic glass-ceramic electrolytes for room-temperature rechargeable sodium batteries
Hayashi, A., Noi, K., Sakuda, A., & Tatsumisago, M. (2012) · Nature Communications · doi:10.1038/ncomms1843 · Cited by 1,060
Understanding and recent development of carbon coating on LiFePO4cathode materials for lithium-ion batteries
Wang, J., & Sun, X. (2012) · Energy Environ. Sci. · doi:10.1039/c1ee01263k · Cited by 1,030
Superior Electrochemical Performance and Storage Mechanism of Na3V2(PO4)3 Cathode for Room‐Temperature Sodium‐Ion Batteries
Jian, Z., Han, W., Lu, X., Yang, H., Hu, Y., Zhou, J., Zhou, Z., Li, J., Chen, W., Chen, D., et al. (2013) · Advanced Energy Materials · doi:10.1002/aenm.201200558 · Cited by 970
A multifunctional 3.5 V iron-based phosphate cathode for rechargeable batteries
Ellis, B. L., Makahnouk, W. R. M., Makimura, Y., Toghill, K., & Nazar, L. F. (2007) · Nature Materials · doi:10.1038/nmat2007 · Cited by 964
A 3.8-V earth-abundant sodium battery electrode
Barpanda, P., Oyama, G., Nishimura, S.-I., Chung, S.-C., & Yamada, A. (2014) · Nature Communications · doi:10.1038/ncomms5358 · Cited by 873
Ion exchange properties of and rates of ionic diffusion in beta-alumina
Yao, Y.-F. Y., & Kummer, J. T. (1967) · Journal of Inorganic and Nuclear Chemistry · doi:10.1016/0022-1902(67)80301-4 · Cited by 868
The First Report on Excellent Cycling Stability and Superior Rate Capability of Na3V2(PO4)3 for Sodium Ion Batteries
Saravanan, K., Mason, C. W., Rudola, A., Wong, K. H., & Balaya, P. (2013) · Advanced Energy Materials · doi:10.1002/aenm.201200803 · Cited by 810
Carbon coated Na3V2(PO4)3 as novel electrode material for sodium ion batteries
Jian, Z., Zhao, L., Pan, H., Hu, Y.-S., Li, H., Chen, W., & Chen, L. (2012) · Electrochemistry Communications · doi:10.1016/j.elecom.2011.11.009 · Cited by 804
Fluorinated Ethylene Carbonate as Electrolyte Additive for Rechargeable Na Batteries
Komaba, S., Ishikawa, T., Yabuuchi, N., Murata, W., Ito, A., & Ohsawa, Y. (2011) · ACS Applied Materials & Interfaces · doi:10.1021/am200973k · Cited by 713
Monodispersed hard carbon spherules with uniform nanopores
Wang, Q., Li, H., Chen, L., & Huang, X. (2001) · Carbon · doi:10.1016/s0008-6223(01)00040-9 · Cited by 702
Amorphous TiO2 Nanotube Anode for Rechargeable Sodium Ion Batteries
Xiong, H., Slater, M. D., Balasubramanian, M., Johnson, C. S., & Rajh, T. (2011) · The Journal of Physical Chemistry Letters · doi:10.1021/jz2012066 · Cited by 673
High capacity, reversible alloying reactions in SnSb/C nanocomposites for Na-ion battery applications
Xiao, L., Cao, Y., Xiao, J., Wang, W., Kovarik, L., Nie, Z., & Liu, J. (2012) · Chemical Communications · doi:10.1039/c2cc17129e · Cited by 601
Preparation of MoS2‐Coated Three‐Dimensional Graphene Networks for High‐Performance Anode Material in Lithium‐Ion Batteries
Cao, X., Shi, Y., Shi, W., Rui, X., Yan, Q., Kong, J., & Zhang, H. (2013) · Small · doi:10.1002/smll.201202697 · Cited by 580
A 3.6 V lithium-based fluorosulphate insertion positive electrode for lithium-ion batteries
Recham, N., Chotard, J.-N., Dupont, L., Delacourt, C., Walker, W., Armand, M., & Tarascon, J.-M. (2010) · Nature Materials · doi:10.1038/nmat2590 · Cited by 576
Synthesis, Structure, and Electrochemical Properties of the Layered Sodium Insertion Cathode Material: NaNi1/3Mn1/3Co1/3O2
Sathiya, M., Hemalatha, K., Ramesha, K., Tarascon, J.-M., & Prakash, A. S. (2012) · Chemistry of Materials · doi:10.1021/cm300466b · Cited by 564
Recent advances in the research of polyanion-type cathode materials for Li-ion batteries
Gong, Z., & Yang, Y. (2011) · Energy & Environmental Science · doi:10.1039/c0ee00713g · Cited by 549
Hierarchical Carbon Framework Wrapped Na3V2(PO4)3 as a Superior High‐Rate and Extended Lifespan Cathode for Sodium‐Ion Batteries
Fang, Y., Xiao, L., Ai, X., Cao, Y., & Yang, H. (2015) · Advanced Materials · doi:10.1002/adma.201502018 · Cited by 549
Room-temperature sodium-ion batteries: Improving the rate capability of carbon anode materials by templating strategies
Wenzel, S., Hara, T., Janek, J., & Adelhelm, P. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01744f · Cited by 544
Effect of Carbon Matrix Dimensions on the Electrochemical Properties of Na3V2(PO4)3 Nanograins for High‐Performance Symmetric Sodium‐Ion Batteries
Li, S., Dong, Y., Xu, L., Xu, X., He, L., & Mai, L. (2014) · Advanced Materials · doi:10.1002/adma.201305522 · Cited by 526
Towards high energy density sodium ion batteries through electrolyte optimization
Ponrouch, A., Dedryvère, R., Monti, D., Demet, A. E., Ateba Mba, J. M., Croguennec, L., Masquelier, C., Johansson, P., & Palacín, M. R. (2013) · Energy & Environmental Science · doi:10.1039/c3ee41379a · Cited by 520
Carbon-Coated Na3V2(PO4)3 Embedded in Porous Carbon Matrix: An Ultrafast Na-Storage Cathode with the Potential of Outperforming Li Cathodes
Zhu, C., Song, K., van Aken, P. A., Maier, J., & Yu, Y. (2014) · Nano Letters · doi:10.1021/nl500548a · Cited by 504
Comparison of electrochemical performances of olivine NaFePO4in sodium-ion batteries and olivine LiFePO4in lithium-ion batteries
Zhu, Y., Xu, Y., Liu, Y., Luo, C., & Wang, C. (2013) · Nanoscale · doi:10.1039/c2nr32758a · Cited by 500
A New High-Energy Cathode for a Na-Ion Battery with Ultrahigh Stability
Park, Y.-U., Seo, D.-H., Kwon, H.-S., Kim, B., Kim, J., Kim, H., Kim, I., Yoo, H.-I., & Kang, K. (2013) · Journal of the American Chemical Society · doi:10.1021/ja406016j · Cited by 442
General synthesis of complex nanotubes by gradient electrospinning and controlled pyrolysis
Niu, C., Meng, J., Wang, X., Han, C., Yan, M., Zhao, K., Xu, X., Ren, W., Zhao, Y., Xu, L., et al. (2015) · Nature Communications · doi:10.1038/ncomms8402 · Cited by 422
Na2FeP2O7 as a Promising Iron‐Based Pyrophosphate Cathode for Sodium Rechargeable Batteries: A Combined Experimental and Theoretical Study
Kim, H., Shakoor, R. A., Park, C., Lim, S. Y., Kim, J., Jo, Y. N., Cho, W., Miyasaka, K., Kahraman, R., Jung, Y., et al. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201201589 · Cited by 407
Understanding the Electrochemical Mechanism of the New Iron-Based Mixed-Phosphate Na4Fe3(PO4)2(P2O7) in a Na Rechargeable Battery
Kim, H., Park, I., Lee, S., Kim, H., Park, K.-Y., Park, Y.-U., Kim, H., Kim, J., Lim, H.-D., Yoon, W.-S., et al. (2013) · Chemistry of Materials · doi:10.1021/cm4013816 · Cited by 406
Unexpected discovery of low-cost maricite NaFePO4as a high-performance electrode for Na-ion batteries
Kim, J., Seo, D.-H., Kim, H., Park, I., Yoo, J.-K., Jung, S.-K., Park, Y.-U., Goddard III, W. A., & Kang, K. (2015) · Energy & Environmental Science · doi:10.1039/c4ee03215b · Cited by 398
Nitrogen‐Doping‐Induced Defects of a Carbon Coating Layer Facilitate Na‐Storage in Electrode Materials
Shen, W., Wang, C., Xu, Q., Liu, H., & Wang, Y. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201400982 · Cited by 387
A combined first principles and experimental study on Na3V2(PO4)2F3 for rechargeable Na batteries
Shakoor, R. A., Seo, D.-H., Kim, H., Park, Y.-U., Kim, J., Kim, S.-W., Gwon, H., Lee, S., & Kang, K. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm33862a · Cited by 365
Sodium iron pyrophosphate: A novel 3.0 V iron-based cathode for sodium-ion batteries
Barpanda, P., Ye, T., Nishimura, S.-I., Chung, S.-C., Yamada, Y., Okubo, M., Zhou, H., & Yamada, A. (2012) · Electrochemistry Communications · doi:10.1016/j.elecom.2012.08.028 · Cited by 362
Mapping of Transition Metal Redox Energies in Phosphates with NASICON Structure by Lithium Intercalation
Padhi, A. K., Nanjundaswamy, K. S., Masquelier, C., & Goodenough, J. B. (1997) · Journal of The Electrochemical Society · doi:10.1149/1.1837868 · Cited by 361
A Family of High‐Performance Cathode Materials for Na‐ion Batteries, Na3(VO1−xPO4)2 F1+2 x (0 ≤ x ≤ 1): Combined First‐Principles and Experimental Study
Park, Y., Seo, D., Kim, H., Kim, J., Lee, S., Kim, B., & Kang, K. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201400561 · Cited by 351
Crystal Structure and Electrochemical Properties of A2MPO4F Fluorophosphates (A = Na, Li; M = Fe, Mn, Co, Ni)
Ellis, B. L., Makahnouk, W. R. M., Rowan-Weetaluktuk, W. N., Ryan, D. H., & Nazar, L. F. (2010) · Chemistry of Materials · doi:10.1021/cm902023h · Cited by 341
LiMn1−xFexPO4 Nanorods Grown on Graphene Sheets for Ultrahigh‐Rate‐Performance Lithium Ion Batteries
Wang, H., Yang, Y., Liang, Y., Cui, L., Sanchez Casalongue, H., Li, Y., Hong, G., Cui, Y., & Dai, H. (2011) · Angewandte Chemie International Edition · doi:10.1002/anie.201103163 · Cited by 324
LiMn0.8Fe0.2PO4: An Advanced Cathode Material for Rechargeable Lithium Batteries
Martha, S. K., Grinblat, J., Haik, O., Zinigrad, E., Drezen, T., Miners, J. H., Exnar, I., Kay, A., Markovsky, B., & Aurbach, D. (2009) · Angewandte Chemie International Edition · doi:10.1002/anie.200903587 · Cited by 311
Better than crystalline: amorphous vanadium oxide for sodium-ion batteries
Uchaker, E., Zheng, Y., Li, S., Candelaria, S., Hu, S., & Cao, G. (2014) · Journal of Materials Chemistry A · doi:10.1039/c4ta03788j · Cited by 305
Electrospun carbon nanofibers and their hybrid composites as advanced materials for energy conversion and storage
Peng, S., Li, L., Kong Yoong Lee, J., Tian, L., Srinivasan, M., Adams, S., & Ramakrishna, S. (2016) · Nano Energy · doi:10.1016/j.nanoen.2016.02.001 · Cited by 304
Preparation and electrochemical studies of Fe-doped Li3V2(PO4)3 cathode materials for lithium-ion batteries
Ren, M., Zhou, Z., Li, Y., Gao, X. P., & Yan, J. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2006.08.008 · Cited by 303
Electrospun Na3V2(PO4)3/C nanofibers as stable cathode materials for sodium-ion batteries
Liu, J., Tang, K., Song, K., van Aken, P. A., Yu, Y., & Maier, J. (2014) · Nanoscale · doi:10.1039/c3nr05329f · Cited by 296
Effects of Mg doping on the remarkably enhanced electrochemical performance of Na3V2(PO4)3 cathode materials for sodium ion batteries
Li, H., Yu, X., Bai, Y., Wu, F., Wu, C., Liu, L.-Y., & Yang, X.-Q. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta00277j · Cited by 291
Self-citation
Comprehensive Investigation of the Na3V2(PO4)2F3–NaV2(PO4)2F3 System by Operando High Resolution Synchrotron X-ray Diffraction
Bianchini, M., Fauth, F., Brisset, N., Weill, F., Suard, E., Masquelier, C., & Croguennec, L. (2015) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b00361 · Cited by 291
Chemical vapor deposition and atomic layer deposition for advanced lithium ion batteries and supercapacitors
Wang, X., & Yushin, G. (2015) · Energy & Environmental Science · doi:10.1039/c5ee01254f · Cited by 289
First exploration of Na-ion migration pathways in the NASICON structure Na3V2(PO4)3
Song, W., Ji, X., Wu, Z., Zhu, Y., Yang, Y., Chen, J., Jing, M., Li, F., & Banks, C. E. (2014) · Journal of Materials Chemistry A · doi:10.1039/c4ta00230j · Cited by 285
Na-ion mobility in layered Na2FePO4F and olivine Na[Fe,Mn]PO4
Tripathi, R., Wood, S. M., Islam, M. S., & Nazar, L. F. (2013) · Energy & Environmental Science · doi:10.1039/c3ee40914g · Cited by 282
Self-sacrificed synthesis of three-dimensional Na3V2(PO4)3 nanofiber network for high-rate sodium–ion full batteries
Ren, W., Zheng, Z., Xu, C., Niu, C., Wei, Q., An, Q., Zhao, K., Yan, M., Qin, M., & Mai, L. (2016) · Nano Energy · doi:10.1016/j.nanoen.2016.03.018 · Cited by 275
Synthesizing Porous NaTi2(PO4)3 Nanoparticles Embedded in 3D Graphene Networks for High-Rate and Long Cycle-Life Sodium Electrodes
Wu, C., Kopold, P., Ding, Y.-L., van Aken, P. A., Maier, J., & Yu, Y. (2015) · ACS Nano · doi:10.1021/acsnano.5b02787 · Cited by 272
Self-citation
Mesoporous Amorphous FePO4Nanospheres as High-Performance Cathode Material for Sodium-Ion Batteries
Fang, Y., Xiao, L., Qian, J., Ai, X., Yang, H., & Cao, Y. (2014) · Nano Letters · doi:10.1021/nl501152f · Cited by 268
Hard Carbon Originated from Polyvinyl Chloride Nanofibers As High-Performance Anode Material for Na-Ion Battery
Bai, Y., Wang, Z., Wu, C., Xu, R., Wu, F., Liu, Y., Li, H., Li, Y., Lu, J., & Amine, K. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b00861 · Cited by 252
Self-citation
Carbon-coated Na3V2(PO4)2F3 nanoparticles embedded in a mesoporous carbon matrix as a potential cathode material for sodium-ion batteries with superior rate capability and long-term cycle life
Liu, Q., Wang, D., Yang, X., Chen, N., Wang, C., Bie, X., Wei, Y., Chen, G., & Du, F. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta05939a · Cited by 233
Novel mixed polyanions lithium-ion battery cathode materials predicted by high-throughput ab initio computations
Hautier, G., Jain, A., Chen, H., Moore, C., Ong, S. P., & Ceder, G. (2011) · Journal of Materials Chemistry · doi:10.1039/c1jm12216a · Cited by 231
High Power–High Energy Sodium Battery Based on Threefold Interpenetrating Network
Zhu, C., Kopold, P., van Aken, P. A., Maier, J., & Yu, Y. (2016) · Advanced Materials · doi:10.1002/adma.201505943 · Cited by 231
Porous Amorphous FePO4 Nanoparticles Connected by Single-Wall Carbon Nanotubes for Sodium Ion Battery Cathodes
Liu, Y., Xu, Y., Han, X., Pellegrinelli, C., Zhu, Y., Zhu, H., Wan, J., Chung, A. C., Vaaland, O., Wang, C., et al. (2012) · Nano Letters · doi:10.1021/nl302819f · Cited by 230
Improving the energy density of Na3V2(PO4)3-based positive electrodes through V/Al substitution
Lalère, F., Seznec, V., Courty, M., David, R., Chotard, J. N., & Masquelier, C. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta03528g · Cited by 215
Tuning the Position of the Redox Couples in Materials with NASICON Structure by Anionic Substitution
Padhi, A. K., Manivannan, V., & Goodenough, J. B. (1998) · Journal of The Electrochemical Society · doi:10.1149/1.1838513 · Cited by 211
High-Performance Olivine NaFePO4 Microsphere Cathode Synthesized by Aqueous Electrochemical Displacement Method for Sodium Ion Batteries
Fang, Y., Liu, Q., Xiao, L., Ai, X., Yang, H., & Cao, Y. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b04691 · Cited by 205
B‐doped Carbon Coating Improves the Electrochemical Performance of Electrode Materials for Li‐ion Batteries
Wang, C., Guo, Z., Shen, W., Xu, Q., Liu, H., & Wang, Y. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201401006 · Cited by 204
Exploration of ion migration mechanism and diffusion capability for Na3V2(PO4)2F3 cathode utilized in rechargeable sodium-ion batteries
Song, W., Ji, X., Wu, Z., Yang, Y., Zhou, Z., Li, F., Chen, Q., & Banks, C. E. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.01.025 · Cited by 198
A new polymorph of Na2MnP2O7 as a 3.6 V cathode material for sodium-ion batteries
Barpanda, P., Ye, T., Avdeev, M., Chung, S.-C., & Yamada, A. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta10210f · Cited by 196
Anomalous Manganese Activation of a Pyrophosphate Cathode in Sodium Ion Batteries: A Combined Experimental and Theoretical Study
Park, C. S., Kim, H., Shakoor, R. A., Yang, E., Lim, S. Y., Kahraman, R., Jung, Y., & Choi, J. W. (2013) · Journal of the American Chemical Society · doi:10.1021/ja312044k · Cited by 194
Structural enhancement of Na3V2(PO4)3/C composite cathode materials by pillar ion doping for high power and long cycle life sodium-ion batteries
Lim, S.-J., Han, D.-W., Nam, D.-H., Hong, K.-S., Eom, J.-Y., Ryu, W.-H., & Kwon, H.-S. (2014) · J. Mater. Chem. A · doi:10.1039/c4ta03948c · Cited by 192
Nanoflake‐Assembled Hierarchical Na3V2(PO4)3/C Microflowers: Superior Li Storage Performance and Insertion/Extraction Mechanism
An, Q., Xiong, F., Wei, Q., Sheng, J., He, L., Ma, D., Yao, Y., & Mai, L. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201401963 · Cited by 192
Structural, Transport, and Electrochemical Investigation of Novel AMSO4F (A = Na, Li; M = Fe, Co, Ni, Mn) Metal Fluorosulphates Prepared Using Low Temperature Synthesis Routes
Barpanda, P., Chotard, J.-N., Recham, N., Delacourt, C., Ati, M., Dupont, L., Armand, M., & Tarascon, J.-M. (2010) · Inorganic Chemistry · doi:10.1021/ic100583f · Cited by 183
Binary Synergy Strengthening and Toughening of Bio-Inspired Nacre-like Graphene Oxide/Sodium Alginate Composite Paper
Chen, K., Shi, B., Yue, Y., Qi, J., & Guo, L. (2015) · ACS Nano · doi:10.1021/acsnano.5b02333 · Cited by 176
Effect of Iron Substitution in the Electrochemical Performance of Na3V2(PO4)3as Cathode for Na-Ion Batteries
Aragón, M. J., Lavela, P., Ortiz, G. F., & Tirado, J. L. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0151502jes · Cited by 170
Electrochemical performance of Na/NaFePO4 sodium-ion batteries with ionic liquid electrolytes
Wongittharom, N., Lee, T.-C., Wang, C.-H., Wang, Y.-C., & Chang, J.-K. (2014) · Journal of Materials Chemistry A · doi:10.1039/c3ta15273a · Cited by 160
Hard Carbon Anodes for Na‐Ion Batteries: Toward a Practical Use
Hasegawa, G., Kanamori, K., Kannari, N., Ozaki, J., Nakanishi, K., & Abe, T. (2015) · ChemElectroChem · doi:10.1002/celc.201500412 · Cited by 158
Improved electrochemical performance of the Na 3 V 2 (PO 4 ) 3 cathode by B-doping of the carbon coating layer for sodium-ion batteries
Shen, W., Li, H., Wang, C., Li, Z., Xu, Q., Liu, H., & Wang, Y. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta03519h · Cited by 151
Carbonophosphates: A New Family of Cathode Materials for Li-Ion Batteries Identified Computationally
Chen, H., Hautier, G., Jain, A., Moore, C. J., Kang, B., Doe, R., Wu, L., Zhu, Y., Tang, Y., & Ceder, G. (2012) · Chemistry of Materials · doi:10.1021/cm203243x · Cited by 151
Budding willow branches shaped Na3V2(PO4)3/C nanofibers synthesized via an electrospinning technique and used as cathode material for sodium ion batteries
Li, H., Bai, Y., Wu, F., Li, Y., & Wu, C. K. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.09.153 · Cited by 147
Self-citation
Self-wrapped Sb/C nanocomposite as anode material for High-performance sodium-ion batteries
Duan, J., Zhang, W., Wu, C. J., Fan, Q., Zhang, W., Xianluo, H., & Huang, Y. (2015) · Nano Energy · doi:10.1016/j.nanoen.2015.07.021 · Cited by 145
Self-citation
Sol–gel preparation and electrochemical properties of Na3V2(PO4)2F3/C composite cathode material for lithium ion batteries
Jiang, T., Chen, G., Li, A., Wang, C., & Wei, Y. (2008) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2008.11.147 · Cited by 142
A novel sol–gel synthesis route to NaVPO4F as cathode material for hybrid lithium ion batteries
Zhao, J., He, J., Ding, X., Zhou, J.-H., Ma, Y., Wu, S., & Huang, R. (2010) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.04.003 · Cited by 141
Synthesis, Computed Stability, and Crystal Structure of a New Family of Inorganic Compounds: Carbonophosphates
Chen, H., Hautier, G., & Ceder, G. (2012) · Journal of the American Chemical Society · doi:10.1021/ja3040834 · Cited by 140
Investigation of the Sodium Ion Pathway and Cathode Behavior in Na3V2(PO4)2F3 Combined via a First Principles Calculation
Song, W., Cao, X., Wu, Z., Chen, J., Zhu, Y., Hou, H., Lan, Q., & Ji, X. (2014) · Langmuir · doi:10.1021/la5025444 · Cited by 134
Highly stable linear carbonate-containing electrolytes with fluoroethylene carbonate for high-performance cathodes in sodium-ion batteries
Lee, Y., Lee, J., Kim, H., Kang, K., & Choi, N. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.04.070 · Cited by 127
Sodium-ion battery cathodes Na 2 FeP 2 O 7 and Na 2 MnP 2 O 7 : diffusion behaviour for high rate performance
Clark, J. M., Barpanda, P., Yamada, A., & Islam, M. S. (2014) · Journal of Materials Chemistry A · doi:10.1039/c4ta02383h · Cited by 122
Boron Substituted Na3V2(P1−xBxO4)3 Cathode Materials with Enhanced Performance for Sodium‐Ion Batteries
Hu, P., Wang, X., Wang, T., Chen, L., Ma, J., Kong, Q., Shi, S., & Cui, G. (2016) · Advanced Science · doi:10.1002/advs.201600112 · Cited by 120
Scalable synthesis of Na 3 V 2 (PO 4 ) 3 /C porous hollow spheres as a cathode for Na-ion batteries
Mao, J., Luo, C. W., Gao, T., Fan, X., & Wang, C. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta01007a · Cited by 118
Na 2.44 Mn 1.79 (SO 4 ) 3 : a new member of the alluaudite family of insertion compounds for sodium ion batteries
Dwibedi, D., Araujo, R. B., Chakraborty, S., Shanbogh, P. P., Sundaram, N. G., Ahuja, R., & Barpanda, P. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta04527d · Cited by 115
Study of multi-walled carbon nanotubes for lithium-ion battery electrodes
Varzi, A., Täubert, C., Wohlfahrt‐Mehrens, M., Kreis, M., & Schütz, W. (2010) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.11.101 · Cited by 109
Three dimensional architecture of carbon wrapped multilayer Na 3 V 2 O 2 (PO 4 ) 2 F nanocubes embedded in graphene for improved sodium ion batteries
Jin, H., Dong, J., Uchaker, E., Zhang, Q., Zhou, X., Hou, S., Li, J., & Cao, G. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta03164h · Cited by 106
Bioinspired Design of Nanostructured Elastomers with Cross-Linked Soft Matrix Grafting on the Oriented Rigid Nanofibers To Mimic Mechanical Properties of Human Skin
Wang, Z., Jiang, F. D., Zhang, Y., You, Y., Wang, Z., & Guan, Z. (2014) · ACS Nano · doi:10.1021/nn506960f · Cited by 105
Controllable synthesis of high-rate and long cycle-life Na3V2(PO4)3 for sodium-ion batteries
Li, H., Wu, C. K., Bai, Y., Wu, F., & Wang, M. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.06.096 · Cited by 94
Self-citation
Cyclic carbonate based-electrolytes enhancing the electrochemical performance of Na4Fe3(PO4)2(P2O7) cathodes for sodium-ion batteries
Jang, J. Y., Kim, H., Lee, Y., Lee, K. T., Kang, K., & Choi, N. (2014) · Electrochemistry Communications · doi:10.1016/j.elecom.2014.05.003 · Cited by 93
Carbon-coated Na3V2(PO4)3 nanocomposite as a novel high rate cathode material for aqueous sodium ion batteries
Zhang, L., Huang, T., & Yu, A. (2015) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2015.05.126 · Cited by 88
A Comparison of Crystal Structures and Electrode Performance between Na2FePO4F and Na2Fe0.5Mn0.5PO4F Synthesized by Solid-State Method for Rechargeable Na-Ion Batteries
Kawabe, Y., Yabuuchi, N., Kajiyama, M., Fukuhara, N., Inamasu, T., Okuyama, R., Nakai, I., & Komaba, S. (2012) · Electrochemistry · doi:10.5796/electrochemistry.80.80 · Cited by 87
Towards high potential and ultra long-life cathodes for sodium ion batteries: freestanding 3D hybrid foams of Na 7 V 4 (P 2 O 7 ) 4 (PO 4 ) and Na 7 V 3 (P 2 O 7 ) 4 @biomass-derived porous carbon
Li, Q., Lin, B., Zhang, S., & Deng, C. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta01465h · Cited by 83
Assembly of Na3V2(PO4)3 Nanoparticles Confined in a One‐Dimensional Carbon Sheath for Enhanced Sodium‐Ion Cathode Properties
Kajiyama, S., Kikkawa, J., Hoshino, J., Okubo, M., & Hosono, E. (2014) · Chemistry - A European Journal · doi:10.1002/chem.201403126 · Cited by 78
The crystal structure of NaMnPO4
Moring, J., & Kostiner, E. (1986) · Journal of Solid State Chemistry · doi:10.1016/0022-4596(86)90046-0 · Cited by 77
Synthesis and Characterization of Three New Layered Phosphates, Na 2 MnP 2 O 7 , NaCsMnP 2 O 7 , and NaCsMn 0.35 Cu 0.65 P 2 O 7
Huang, Q. Y., & Hwu, S. (1998) · Inorganic Chemistry · doi:10.1021/ic980616d · Cited by 72
Observation of the highest Mn3+/Mn2+ redox potential of 4.45 V in a Li2MnP2O7 pyrophosphate cathode
Tamaru, M., Barpanda, P., Yamada, Y., Nishimura, S., & Yamada, A. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm35260e · Cited by 71
A carbon coated NASICON structure material embedded in porous carbon enabling superior sodium storage performance: NaTi 2 (PO 4 ) 3 as an example
Jiang, Y., Zeng, L., Wang, J., Li, W., Pan, F., & Yu, Y. M. (2015) · Nanoscale · doi:10.1039/c5nr03978a · Cited by 68
A mixed iron–manganese based pyrophosphate cathode, Na 2 Fe 0.5 Mn 0.5 P 2 O 7 , for rechargeable sodium ion batteries
Shakoor, R. A., Park, C. S., Raja, A. A., Shin, J., & Kahraman, R. (2016) · Physical Chemistry Chemical Physics · doi:10.1039/c5cp06836c · Cited by 63
Y-doped Li8ZrO6: A Li-Ion Battery Cathode Material with High Capacity
Huang, S., Wilson, B. E., Wang, B., Fang, Y., Buffington, K., Stein, A., & Truhlar, D. G. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b04690 · Cited by 59
Na3V2(PO4)3/C nanorods as advanced cathode material for sodium ion batteries
Li, H., Bai, Y., Wu, F., Ni, Q., & Wu, C. K. (2015) · Solid State Ionics · doi:10.1016/j.ssi.2015.06.026 · Cited by 53
Self-citation
Spinel materials for Li-ion batteries: new insights obtained by operando neutron and synchrotron X-ray diffraction
Bianchini, M., Fauth, F., Suard, E., Leriche, J., Masquelier, C., & Croguennec, L. (2015) · Acta Crystallographica Section B Structural Science Crystal Engineering and Materials · doi:10.1107/s2052520615017199 · Cited by 53
Na3V2(PO4)3/C nanocomposite synthesized via pre-reduction process as high-performance cathode material for sodium-ion batteries
Zhu, X., Fang, Y., Ai, X., Yang, H., & Cao, Y. (2015) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2015.05.170 · Cited by 51
Charge–discharge behavior of a Na2FeP2O7 positive electrode in an ionic liquid electrolyte between 253 and 363 K
Chen, C.-Y., Matsumoto, K., Nohira, T., Ding, C., Yamamoto, T., & Hagiwara, R. (2014) · Electrochimica Acta · doi:10.1016/j.electacta.2014.04.038 · Cited by 49
Influence of Rotational Distortions on Li+- and Na+-Intercalation in Anti-NASICON Fe2(MoO4)3
Zhou, S., Barım, G., Morgan, B. J., et al. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b01806 · Cited by 48
Preparation and electrochemical properties of Li3V1.8Mn0.2(PO4)3 doped via different Mn sources
Chen, L., Yan, B., Xie, Y., Wang, S., Jiang, X., & Yang, G. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.03.061 · Cited by 39
Electrochemical Properties and Sodium‐Storage Mechanism of Ag2Mo2O7 as the Anode Material for Sodium‐Ion Batteries
Chen, N., Gao, Y. P., Zhang, M., Meng, X., Wang, C., Wei, Y., Du, F., & Chen, G. (2016) · Chemistry - A European Journal · doi:10.1002/chem.201600224 · Cited by 33
A Mo(III) phosphate with a cage structure: NaMoP2O7
Leclaire, A., Borel, M. M., Grandin, A., & Raveau, B. (1988) · Journal of Solid State Chemistry · doi:10.1016/0022-4596(88)90200-9 · Cited by 32
Predicting electrochemical properties and ionic diffusion in Na 2+2x Mn 2−x (SO 4 ) 3 : crafting a promising high voltage cathode material
Araujo, R. B., Islam, M. S., Chakraborty, S., & Ahuja, R. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta08114a · Cited by 24
Structural, magnetic, and electrochemical properties of the high pressure form of Na 2 Co[PO 4 ]F
Yahia, H. B., Mori, D., Shikano, M., Kobayashi, H., & Inaguma, Y. (2014) · Dalton Transactions · doi:10.1039/c4dt01418a · Cited by 9
STRUCTURAL EVOLUTIONS IN THE PHOSPHATE AND VANADATE AMXO4 SERIES (A=Li+, Na+, Cu+, Ag+, M=Cd2+, Mn2+, X=V5+, P5+)
Gaudin, E., Yahia, H. B., & Darriet, J. (2005) · Phosphorus Research Bulletin · doi:10.3363/prb1992.19.0_19 · Cited by 6

Polyanion-type cathode materials for sodium-ion batteries
Jin, T., Li, H., Zhu, K., Wang, P.-F., Liu, P., & Jiao, L. (2020) · Chemical Society Reviews · doi:10.1039/c9cs00846b · Cited by 908
Sodium‐Ion Batteries: From Academic Research to Practical Commercialization
Deng, J., Luo, W., Chou, S., Liu, H., & Dou, S. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201701428 · Cited by 770
Engineering of Sodium-Ion Batteries: Opportunities and Challenges
Zhao, L., Zhang, T., Li, W., Li, T., Zhang, L., Zhang, X., & Wang, Z. (2023) · Engineering · doi:10.1016/j.eng.2021.08.032 · Cited by 451
Recent Progress of Layered Transition Metal Oxide Cathodes for Sodium‐Ion Batteries
Liu, Q., Hu, Z., Chen, M., Zou, C., Jin, H., Wang, S., Chou, S., & Dou, S. (2019) · Small · doi:10.1002/smll.201805381 · Cited by 447
Nanowires for Electrochemical Energy Storage
Zhou, G., Xu, L., Hu, G., Mai, L., & Cui, Y. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00326 · Cited by 439

See all 586

Authors: Ni, Q., Bai, Y., Wu, F., & Wu, C.
Venue: Advanced Science
Publisher: Wiley
Published: 2017-01-25
Volume: 4
Issue: 3
Pages: 1600275-1600275
ISSN: 2198-3844 (ISSN-L)
DOI: 10.1002/advs.201600275
OpenAlex: W2582056363
Cited by: 586
References: 116
FWCI: 23.49
Type: journal article
Language: en
Open access: gold

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.

Polyanion‐Type Electrode Materials for Sodium‐Ion Batteries

Abstract

Overview

Integrity signals

Verification

Claims the paper makes

Self-check

Citations

Cites

Cited by

Metadata

Record

About these checks

Data sources