The DOI matches its Crossref record; 66 of the 66 references it cites were found in a registry or an index.
Catalytic Effects in Lithium–Sulfur Batteries: Promoted Sulfur Transformation and Reduced Shuttle Effect
Open accessAbstract
Lithium–sulfur (Li–S) battery has emerged as one of the most promising next‐generation energy‐storage systems. However, the shuttle effect greatly reduces the battery cycle life and sulfur utilization, which is great deterrent to its practical use. This paper reviews the tremendous efforts that are made to find a remedy for this problem, mostly through physical or chemical confinement of the lithium polysulfides (LiPSs). Intrinsically, this “confinement” has a relatively limited effect on improving the battery performance because in most cases, the LiPSs are “passively” blocked and cannot be reused. Thus, this strategy becomes less effective with a high sulfur loading and ultralong cycling. A more “positive” method that not only traps but also increases the subsequent conversion of LiPSs back to lithium sulfides is urgently needed to fundamentally solve the shuttle effect. Here, recent advances on catalytic effects in increasing the rate of conversion of soluble long‐chain LiPSs to insoluble short‐chain Li 2 S 2/Li 2 S, and vice versa, are reviewed, and the roles of noble metals, metal oxides, metal sulfides, metal nitrides, and some metal‐free materials in this process are highlighted. Challenges and potential solutions for the design of catalytic cathodes and interlayers in Li–S battery are discussed in detail.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Black phosphorus field-effect transistors
Li, L., Yu, Y., Ye, G. J., Ge, Q., Ou, X., Wu, H., Feng, D., Chen, X. H., & Zhang, Y. (2014) · Nature Nanotechnology · doi:10.1038/nnano.2014.35 · Cited by 8,413
A highly ordered nanostructured carbon–sulphur cathode for lithium–sulphur batteries
Ji, X., Lee, K. T., & Nazar, L. F. (2009) · Nature Materials · doi:10.1038/nmat2460 · Cited by 5,988
Graphene-Like Two-Dimensional Materials
Xu, M., Liang, T., Shi, M., & Chen, H. (2013) · Chemical Reviews · doi:10.1021/cr300263a · Cited by 4,531
Polysulfide Shuttle Study in the Li/S Battery System
Mikhaylik, Y. V., & Akridge, J. R. (2004) · Journal of The Electrochemical Society · doi:10.1149/1.1806394 · Cited by 2,115
Liang, J., Jiao, Y., Jaroniec, M., & Qiao, S. Z. (2012) · Angewandte Chemie International Edition · doi:10.1002/anie.201206720 · Cited by 2,093
Nitrogen-doped mesoporous carbon of extraordinary capacitance for electrochemical energy storage
Lin, T., Chen, I.-W., Liu, F., Yang, C., Bi, H., Xu, F., & Huang, F. (2015) · Science · doi:10.1126/science.aab3798 · Cited by 2,075
A highly efficient polysulfide mediator for lithium–sulfur batteries
Liang, X., Hart, C., Pang, Q., Garsuch, A., Weiss, T., & Nazar, L. F. (2015) · Nature Communications · doi:10.1038/ncomms6682 · Cited by 2,062
Nanostructured sulfur cathodes
Yang, Y., Zheng, G., & Cui, Y. (2013) · Chemical Society Reviews · doi:10.1039/c2cs35256g · Cited by 1,947
Graphene/metal oxide composite electrode materials for energy storage
Wu, Z.-S., Zhou, G., Yin, L.-C., Ren, W., Li, F., & Cheng, H.-M. (2012) · Nano Energy · doi:10.1016/j.nanoen.2011.11.001 · Cited by 1,836
Self-citationPorous Hollow Carbon@Sulfur Composites for High‐Power Lithium–Sulfur Batteries
Jayaprakash, N., Shen, J., Moganty, S. S., Corona, A., & Archer, L. A. (2011) · Angewandte Chemie International Edition · doi:10.1002/anie.201100637 · Cited by 1,811
Cited by
Fast Charging of Lithium‐Ion Batteries: A Review of Materials Aspects
Weiss, M., Ruess, R., Kasnatscheew, J., Levartovsky, Y., Levy, N. R., Minnmann, P., Stolz, L., Waldmann, T., Wohlfahrt‐Mehrens, M., Aurbach, D., et al. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202101126 · Cited by 1,055
Zhang, L., Liu, D., Muhammad, Z., Wan, F., Xie, W., Wang, Y., Song, L., Niu, Z., & Chen, J. (2019) · Advanced Materials · doi:10.1002/adma.201903955 · Cited by 713
Self-citationRevisiting the Role of Polysulfides in Lithium–Sulfur Batteries
Li, G., Wang, S., Zhang, Y., Li, M., Chen, Z., & Lu, J. (2018) · Advanced Materials · doi:10.1002/adma.201705590 · Cited by 711
Yuan, H., Peng, H., Li, B., Xie, J., Kong, L., Zhao, M., Chen, X., Huang, J., & Zhang, Q. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201802768 · Cited by 626
Current Status and Future Prospects of Metal–Sulfur Batteries
Chung, S., & Manthiram, A. (2019) · Advanced Materials · doi:10.1002/adma.201901125 · Cited by 622
Zhou, G., Zhao, S., Wang, T., Yang, S.-Z., Johannessen, B., Chen, H., Liu, C., Ye, Y., Wu, Y., Peng, Y., et al. (2020) · Nano Letters · doi:10.1021/acs.nanolett.9b04719 · Cited by 605
Self-citationLim, W., Kim, S., Jo, C., & Lee, J. (2019) · Angewandte Chemie International Edition · doi:10.1002/anie.201902413 · Cited by 535
Layered Transition Metal Dichalcogenide‐Based Nanomaterials for Electrochemical Energy Storage
Yun, Q., Li, L., Hu, Z., Lu, Q., Chen, B., & Zhang, H. (2020) · Advanced Materials · doi:10.1002/adma.201903826 · Cited by 506
A review on the status and challenges of electrocatalysts in lithium-sulfur batteries
He, J., & Manthiram, A. (2019) · Energy Storage Materials · doi:10.1016/j.ensm.2019.04.038 · Cited by 479
Huang, Y., Lin, L., Zhang, C., Liu, L., Li, Y., Qiao, Z., Lin, J., Wei, Q., Wang, L., Xie, Q., et al. (2022) · Advanced Science · doi:10.1002/advs.202106004 · Cited by 463
Self-citationEmerging Catalysts to Promote Kinetics of Lithium–Sulfur Batteries
Wang, P., Xi, B., Huang, M., Chen, W., Feng, J., & Xiong, S. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202002893 · Cited by 451
Selective Catalysis Remedies Polysulfide Shuttling in Lithium‐Sulfur Batteries
Hua, W., Li, H., Pei, C., Xia, J., Sun, Y., Zhang, C., Lv, W., Tao, Y., Jiao, Y., Zhang, B., et al. (2021) · Advanced Materials · doi:10.1002/adma.202101006 · Cited by 449
Self-citationRational Design of Nanostructured Functional Interlayer/Separator for Advanced Li–S Batteries
Jeong, Y. C., Kim, J. H., Nam, S., Park, C. R., & Yang, S. J. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201707411 · Cited by 429
Bidirectional Catalysts for Liquid–Solid Redox Conversion in Lithium–Sulfur Batteries
Wang, R., Luo, C., Wang, T., Zhou, G., Deng, Y., He, Y., Zhang, Q., Kang, F., Lv, W., & Yang, Q. (2020) · Advanced Materials · doi:10.1002/adma.202000315 · Cited by 423
Self-citationNg, S., Lau, M. Y. L., & Ong, W. (2021) · Advanced Materials · doi:10.1002/adma.202008654 · Cited by 404
Stabilized Li3N for efficient battery cathode prelithiation
Sun, Y., Li, Y., Sun, J., Li, Y., Pei, A., & Cui, Y. (2017) · Energy Storage Materials · doi:10.1016/j.ensm.2016.10.004 · Cited by 402
Strategies toward High‐Loading Lithium–Sulfur Battery
Hu, Y., Chen, W., Lei, T., Jiao, Y., Huang, J., Hu, A., Gong, C., Yan, C., Wang, X., & Xiong, J. (2020) · Advanced Energy Materials · doi:10.1002/aenm.202000082 · Cited by 402
Ye, Z., Jiang, Y., Li, L., Wu, F., & Chen, R. (2020) · Advanced Materials · doi:10.1002/adma.202002168 · Cited by 394
Rational design of two-dimensional nanomaterials for lithium–sulfur batteries
Jana, M., Xu, R., Cheng, X.-B., Yeon, J. S., Park, J. M., Huang, J.-Q., Zhang, Q., & Park, H. S. (2020) · Energy & Environmental Science · doi:10.1039/c9ee02049g · Cited by 393
Xu, Z.-L., Lin, S., Onofrio, N., Zhou, L., Shi, F., Lu, W., Kang, K., Zhang, Q., & Lau, S. P. (2018) · Nature Communications · doi:10.1038/s41467-018-06629-9 · Cited by 391
2D MoN‐VN Heterostructure To Regulate Polysulfides for Highly Efficient Lithium‐Sulfur Batteries
Ye, C., Jiao, Y., Jin, H., Slattery, A. D., Davey, K., Wang, H., & Qiao, S. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201810579 · Cited by 385
Interface Chemistry on MXene‐Based Materials for Enhanced Energy Storage and Conversion Performance
Hui, X., Ge, X., Zhao, R., Li, Z., & Yin, L. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202005190 · Cited by 385
High-Energy Batteries: Beyond Lithium-Ion and Their Long Road to Commercialisation
Gao, Y., Pan, Z., Sun, J., Liu, Z., & Wang, J. (2022) · Nano-Micro Letters · doi:10.1007/s40820-022-00844-2 · Cited by 378
Sulfur Reduction Reaction in Lithium–Sulfur Batteries: Mechanisms, Catalysts, and Characterization
Zhou, L., Danilov, D. L., Qiao, F., Wang, J., Li, H., Eichel, R., & Notten, P. H. L. (2022) · Advanced Energy Materials · doi:10.1002/aenm.202202094 · Cited by 343
Status and Prospects of MXene‐Based Lithium–Sulfur Batteries
Zhao, Q., Zhu, Q., Liu, Y., & Xu, B. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202100457 · Cited by 334
A Bifunctional Perovskite Promoter for Polysulfide Regulation toward Stable Lithium–Sulfur Batteries
Kong, L., Chen, X., Li, B., Peng, H., Huang, J., Xie, J., & Zhang, Q. (2018) · Advanced Materials · doi:10.1002/adma.201705219 · Cited by 332
Pang, Q., Kwok, C. Y., Kundu, D., Liang, X., & Nazar, L. F. (2019) · Joule · doi:10.1016/j.joule.2018.09.024 · Cited by 317
Zhang, B., Luo, C., Deng, Y., Huang, Z., Zhou, G., Lv, W., He, Y., Wan, Y., Kang, F., & Yang, Q. (2020) · Advanced Energy Materials · doi:10.1002/aenm.202000091 · Cited by 317
Self-citationAdvanced energy materials for flexible batteries in energy storage: A review
Kong, L., Tang, C., Peng, H., Huang, J., & Zhang, Q. (2020) · SmartMat · doi:10.1002/smm2.1007 · Cited by 316
Sulfur-Based Aqueous Batteries: Electrochemistry and Strategies
Liu, J., Zhou, W., Zhao, R., Yang, Z., Li, W., Chao, D., Qiao, S.-Z., & Zhao, D. (2021) · Journal of the American Chemical Society · doi:10.1021/jacs.1c06923 · Cited by 313
Carbon nanotube-based materials for lithium–sulfur batteries
Zheng, M., Chi, Y., Hu, Q., Tang, H., Jiang, X., Zhang, L., Zhang, S., Pang, H., & Xu, Q. (2019) · Journal of Materials Chemistry A · doi:10.1039/c9ta05347f · Cited by 311
Lei, J., Fan, X.-X., Liu, T., Xu, P., Hou, Q., Li, K., Yuan, R.-M., Zheng, M.-S., Dong, Q.-F., & Chen, J.-J. (2022) · Nature Communications · doi:10.1038/s41467-021-27866-5 · Cited by 308
Semi-Immobilized Molecular Electrocatalysts for High-Performance Lithium–Sulfur Batteries
Zhao, C.-X., Li, X.-Y., Zhao, M., Chen, Z.-X., Song, Y.-W., Chen, W.-J., Liu, J.-N., Wang, B., Zhang, X.-Q., Chen, C.-M., et al. (2021) · Journal of the American Chemical Society · doi:10.1021/jacs.1c09107 · Cited by 307
Zhang, S., Ao, X., Huang, J., Wei, B., Zhai, Y., Zhai, D., Deng, W., Su, C., Wang, D., & Li, Y. (2021) · Nano Letters · doi:10.1021/acs.nanolett.1c03499 · Cited by 290
Progress and Perspective of Solid‐State Lithium–Sulfur Batteries
Lei, D., Shi, K., Ye, H., Wan, Z., Wang, Y., Shen, L., Li, B., Yang, Q., Kang, F., & He, Y. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201707570 · Cited by 282
Self-citationLiu, W., Luo, C., Zhang, S., Zhang, B., Ma, J., Wang, X., Liu, W., Li, Z., Yang, Q.-H., & Lv, W. (2021) · ACS Nano · doi:10.1021/acsnano.1c00896 · Cited by 269
Self-citationCyclic Voltammetry in Lithium–Sulfur Batteries—Challenges and Opportunities
Huang, X., Wang, Z., Knibbe, R., Luo, B., Ahad, S. A., Sun, D., & Wang, L. (2019) · Energy Technology · doi:10.1002/ente.201801001 · Cited by 269
Exploring and Understanding the Roles of Li2Sn and the Strategies to beyond Present Li-S Batteries
Lei, J., Liu, T., Chen, J., Zheng, M., Zhang, Q., Mao, B., & Dong, Q. (2020) · Chem · doi:10.1016/j.chempr.2020.06.032 · Cited by 268
Engineering Strategies for Suppressing the Shuttle Effect in Lithium–Sulfur Batteries
Li, J., Gao, L., Pan, F., Gong, C., Sun, L., Gao, H., Zhang, J., Zhao, Y., Wang, G., & Liu, H. (2024) · Nano-Micro Letters · doi:10.1007/s40820-023-01223-1 · Cited by 267
Metadata
- Authors
- Liu, D., Zhang, C., Zhou, G., Lv, W., Ling, G., Zhi, L., & Yang, Q.
- Venue
- Advanced Science
- Publisher
- Wiley
- Published
- 2017-09-05
- Volume
- 5
- Issue
- 1
- Pages
- 1700270-1700270
- ISSN
- 2198-3844 (ISSN-L)
- OpenAlex
- W2753050978
- Cited by
- 956
- References
- 66
- FWCI
- 35.35
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.