The DOI matches its Crossref record; 66 of the 66 references it cites were found in a registry or an index.
Catalytic Effects in Lithium–Sulfur Batteries: Promoted Sulfur Transformation and Reduced Shuttle Effect
Open accessAbstract
Lithium–sulfur (Li–S) battery has emerged as one of the most promising next‐generation energy‐storage systems. However, the shuttle effect greatly reduces the battery cycle life and sulfur utilization, which is great deterrent to its practical use. This paper reviews the tremendous efforts that are made to find a remedy for this problem, mostly through physical or chemical confinement of the lithium polysulfides (LiPSs). Intrinsically, this “confinement” has a relatively limited effect on improving the battery performance because in most cases, the LiPSs are “passively” blocked and cannot be reused. Thus, this strategy becomes less effective with a high sulfur loading and ultralong cycling. A more “positive” method that not only traps but also increases the subsequent conversion of LiPSs back to lithium sulfides is urgently needed to fundamentally solve the shuttle effect. Here, recent advances on catalytic effects in increasing the rate of conversion of soluble long‐chain LiPSs to insoluble short‐chain Li 2 S 2/Li 2 S, and vice versa, are reviewed, and the roles of noble metals, metal oxides, metal sulfides, metal nitrides, and some metal‐free materials in this process are highlighted. Challenges and potential solutions for the design of catalytic cathodes and interlayers in Li–S battery are discussed in detail.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Black phosphorus field-effect transistors
Li, L., Yu, Y., Ye, G. J., Ge, Q., Ou, X., Wu, H., Feng, D., Chen, X. H., & Zhang, Y. (2014) · Nature Nanotechnology · doi:10.1038/nnano.2014.35 · Cited by 8,413
A highly ordered nanostructured carbon–sulphur cathode for lithium–sulphur batteries
Ji, X., Lee, K. T., & Nazar, L. F. (2009) · Nature Materials · doi:10.1038/nmat2460 · Cited by 5,988
Graphene-Like Two-Dimensional Materials
Xu, M., Liang, T., Shi, M., & Chen, H. (2013) · Chemical Reviews · doi:10.1021/cr300263a · Cited by 4,531
Polysulfide Shuttle Study in the Li/S Battery System
Mikhaylik, Y. V., & Akridge, J. R. (2004) · Journal of The Electrochemical Society · doi:10.1149/1.1806394 · Cited by 2,115
Liang, J., Jiao, Y., Jaroniec, M., & Qiao, S. Z. (2012) · Angewandte Chemie International Edition · doi:10.1002/anie.201206720 · Cited by 2,093
Nitrogen-doped mesoporous carbon of extraordinary capacitance for electrochemical energy storage
Lin, T., Chen, I.-W., Liu, F., Yang, C., Bi, H., Xu, F., & Huang, F. (2015) · Science · doi:10.1126/science.aab3798 · Cited by 2,075
A highly efficient polysulfide mediator for lithium–sulfur batteries
Liang, X., Hart, C., Pang, Q., Garsuch, A., Weiss, T., & Nazar, L. F. (2015) · Nature Communications · doi:10.1038/ncomms6682 · Cited by 2,062
Nanostructured sulfur cathodes
Yang, Y., Zheng, G., & Cui, Y. (2013) · Chemical Society Reviews · doi:10.1039/c2cs35256g · Cited by 1,947
Graphene/metal oxide composite electrode materials for energy storage
Wu, Z.-S., Zhou, G., Yin, L.-C., Ren, W., Li, F., & Cheng, H.-M. (2012) · Nano Energy · doi:10.1016/j.nanoen.2011.11.001 · Cited by 1,836
Self-citationPorous Hollow Carbon@Sulfur Composites for High‐Power Lithium–Sulfur Batteries
Jayaprakash, N., Shen, J., Moganty, S. S., Corona, A., & Archer, L. A. (2011) · Angewandte Chemie International Edition · doi:10.1002/anie.201100637 · Cited by 1,811
Smaller Sulfur Molecules Promise Better Lithium–Sulfur Batteries
Xin, S., Gu, L., Zhao, N.-H., Yin, Y.-X., Zhou, L.-J., Guo, Y.-G., & Wan, L.-J. (2012) · Journal of the American Chemical Society · doi:10.1021/ja308170k · Cited by 1,644
Nanostructured Metal Oxides and Sulfides for Lithium–Sulfur Batteries
Liu, X., Huang, J., Zhang, Q., & Mai, L. (2017) · Advanced Materials · doi:10.1002/adma.201601759 · Cited by 1,616
Powering Lithium–Sulfur Battery Performance by Propelling Polysulfide Redox at Sulfiphilic Hosts
Yuan, Z., Peng, H.-J., Hou, T.-Z., Huang, J.-Q., Chen, C.-M., Wang, D.-W., Cheng, X.-B., Wei, F., & Zhang, Q. (2016) · Nano Letters · doi:10.1021/acs.nanolett.5b04166 · Cited by 1,438
Tao, X., Wang, J., Liu, C., Wang, H., Yao, H., Zheng, G., Seh, Z. W., Cai, Q., Li, W., Zhou, G., et al. (2016) · Nature Communications · doi:10.1038/ncomms11203 · Cited by 1,391
Self-citationHigh-Performance Electrocatalysis Using Metallic Cobalt Pyrite (CoS2) Micro- and Nanostructures
Faber, M. S., Dziedzic, R., Lukowski, M. A., Kaiser, N. S., Ding, Q., & Jin, S. (2014) · Journal of the American Chemical Society · doi:10.1021/ja504099w · Cited by 1,372
Pang, Q., Kundu, D., Cuisinier, M., & Nazar, L. F. (2014) · Nature Communications · doi:10.1038/ncomms5759 · Cited by 1,318
Catalytic oxidation of Li 2 S on the surface of metal sulfides for Li−S batteries
Zhou, G., Tian, H., Jin, Y., Tao, X., Liu, B., Zhang, R., Seh, Z. W., Zhuo, D., Liu, Y., Sun, J., et al. (2017) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1615837114 · Cited by 1,278
Self-citationSun, Z., Zhang, J., Yin, L., Hu, G., Fang, R., Cheng, H.-M., & Li, F. (2017) · Nature Communications · doi:10.1038/ncomms14627 · Cited by 1,135
Liang, Q., Li, Z., Huang, Z., Kang, F., & Yang, Q. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201503221 · Cited by 1,087
Self-citationZhou, T., Lv, W., Li, J., Zhou, G., Zhao, Y., Fan, S., Liu, B., Li, B., Kang, F., & Yang, Q.-H. (2017) · Energy & Environmental Science · doi:10.1039/c7ee01430a · Cited by 1,056
Self-citationLin, H., Yang, L., Jiang, X., Li, G., Zhang, T., Yao, Q., Zheng, G. W., & Lee, J. Y. (2017) · Energy & Environmental Science · doi:10.1039/c7ee01047h · Cited by 952
Pang, Q., Tang, J., Huang, H., Liang, X., Hart, C., Tam, K. C., & Nazar, L. F. (2015) · Advanced Materials · doi:10.1002/adma.201502467 · Cited by 780
Electrocatalytic Polysulfide Traps for Controlling Redox Shuttle Process of Li–S Batteries
Al Salem, H., Babu, G., V. Rao, C., & Arava, L. M. R. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b04472 · Cited by 753
Zhang, X., Xie, H., Liu, Z., Tan, C., Luo, Z., Li, H., Lin, J., Sun, L., Chen, W., Xu, Z., et al. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201409400 · Cited by 710
Stabilized TiN Nanowire Arrays for High-Performance and Flexible Supercapacitors
Lu, X., Wang, G., Zhai, T., Yu, M., Xie, S., Ling, Y., Liang, C., Tong, Y., & Li, Y. (2012) · Nano Letters · doi:10.1021/nl302761z · Cited by 670
Unstacked double-layer templated graphene for high-rate lithium–sulphur batteries
Zhao, M.-Q., Zhang, Q., Huang, J.-Q., Tian, G.-L., Nie, J.-Q., Peng, H.-J., & Wei, F. (2014) · Nature Communications · doi:10.1038/ncomms4410 · Cited by 664
Liang, Q., Li, Z., Yu, X., Huang, Z., Kang, F., & Yang, Q. (2015) · Advanced Materials · doi:10.1002/adma.201502057 · Cited by 646
Self-citationParvez, K., Yang, S., Hernandez, Y., Winter, A., Turchanin, A., Feng, X., & Müllen, K. (2012) · ACS Nano · doi:10.1021/nn302674k · Cited by 612
A novel synergistic composite with multi-functional effects for high-performance Li–S batteries
Li, Y.-J., Fan, J.-M., Zheng, M.-S., & Dong, Q.-F. (2016) · Energy & Environmental Science · doi:10.1039/c6ee00104a · Cited by 600
Carbon materials for Li–S batteries: Functional evolution and performance improvement
Liang, J., Sun, Z.-H., Li, F., & Cheng, H.-M. (2016) · Energy Storage Materials · doi:10.1016/j.ensm.2015.09.007 · Cited by 593
Hu, G., Xu, C., Sun, Z., Wang, S., Cheng, H., Li, F., & Ren, W. (2016) · Advanced Materials · doi:10.1002/adma.201504765 · Cited by 532
Structural Design of Cathodes for Li‐S Batteries
Pope, M. A., & Aksay, I. A. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500124 · Cited by 500
Porous Hollow Carbon@Sulfur Composites for High‐Power Lithium–Sulfur Batteries
Jayaprakash, N., Shen, J., Moganty, S. S., Corona, A., & Archer, L. A. (2011) · Angewandte Chemie · doi:10.1002/ange.201100637 · Cited by 487
Li, Z., Yuan, L., Yi, Z., Sun, Y., Liu, Y., Jiang, Y., Shen, Y., Xin, Y., Zhang, Z., & Huang, Y. (2014) · Advanced Energy Materials · doi:10.1002/aenm.201301473 · Cited by 481
Zhang, Z., Kong, L., Liu, S., Li, G., & Gao, X. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201602543 · Cited by 472
Li, Z., Huang, Y., Yuan, L., Hao, Z., & Huang, Y. (2015) · Carbon · doi:10.1016/j.carbon.2015.03.008 · Cited by 429
Cheng, X.-B., Huang, J.-Q., Zhang, Q., Peng, H.-J., Zhao, M.-Q., & Wei, F. (2014) · Nano Energy · doi:10.1016/j.nanoen.2013.12.013 · Cited by 403
Propelling polysulfides transformation for high-rate and long-life lithium–sulfur batteries
Zheng, C., Niu, S., Lv, W., Zhou, G., Li, J., Fan, S., Deng, Y., Pan, Z., Li, B., Kang, F., et al. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.01.040 · Cited by 391
Self-citationChen, L., Zhou, G., Liu, Z., Ma, X., Chen, J., Zhang, Z., Ma, X., Li, F., Cheng, H., & Ren, W. (2016) · Advanced Materials · doi:10.1002/adma.201503678 · Cited by 387
Self-citationTransition Metal Dichalcogenide Atomic Layers for Lithium Polysulfides Electrocatalysis
Babu, G., Masurkar, N., Al Salem, H., & Arava, L. M. R. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.6b08681 · Cited by 386
Electronic correlation effects in transition-metal sulfides
Rohrbach, A., Hafner, J., & Kresse, G. (2003) · Journal of Physics: Condensed Matter · doi:10.1088/0953-8984/15/6/325 · Cited by 381
A Mathematical Model for a Lithium–Sulfur Cell
Kumaresan, K., Mikhaylik, Y., & White, R. E. (2008) · Journal of The Electrochemical Society · doi:10.1149/1.2937304 · Cited by 375
Chen, J.-J., Yuan, R.-M., Feng, J.-M., Zhang, Q., Huang, J.-X., Fu, G., Zheng, M.-S., Ren, B., & Dong, Q.-F. (2015) · Chemistry of Materials · doi:10.1021/cm5044667 · Cited by 372
In Situ Reactive Assembly of Scalable Core–Shell Sulfur–MnO2 Composite Cathodes
Liang, X. M., & Nazar, L. F. (2016) · ACS Nano · doi:10.1021/acsnano.5b07458 · Cited by 371
Nanostructured transition metal nitrides for energy storage and fuel cells
Dong, S., Chen, X., Zhang, X., & Cui, G. (2013) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2012.12.012 · Cited by 370
Multifunctional Co3S4@sulfur nanotubes for enhanced lithium-sulfur battery performance
Pu, J., Shen, Z., Zheng, J., Wu, W., Zhu, C., Zhou, Q., Zhang, H., & Pan, F. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.05.009 · Cited by 369
Phosphorene as a Polysulfide Immobilizer and Catalyst in High‐Performance Lithium–Sulfur Batteries
Li, L., Chen, L., Mukherjee, S., Gao, J., Sun, H., Liu, Z., Ma, X., Gupta, T., Singh, C. V., Ren, W., et al. (2017) · Advanced Materials · doi:10.1002/adma.201602734 · Cited by 364
Park, J., Yu, B., Park, J. S., Choi, J. W., Kim, C., Sung, Y., & Goodenough, J. B. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201602567 · Cited by 348
Li, Z., Yuan, L., Yi, Z., et al. (2013) · ECS Meeting Abstracts · doi:10.1149/ma2013-02/2/42 · Cited by 322
Wang, H., Zhang, Q., Yao, H., Liang, Z., Lee, H.-W., Hsu, P.-C., Zheng, G., & Cui, Y. (2014) · Nano Letters · doi:10.1021/nl503730c · Cited by 312
Capacity Fade Analysis of Sulfur Cathodes in Lithium–Sulfur Batteries
Yan, J., Liu, X., & Li, B. (2016) · Advanced Science · doi:10.1002/advs.201600101 · Cited by 307
Monodispersed Sulfur Nanoparticles for Lithium–Sulfur Batteries with Theoretical Performance
Chen, H., Wang, C., Dong, W., Lu, W., Du, Z., & Chen, L. (2015) · Nano Letters · doi:10.1021/nl504963e · Cited by 304
Li‐S Battery Analyzed by UV/Vis in Operando Mode
Patel, M. U. M., Demir‐Cakan, R., Morcrette, M., Tarascon, J., Gaberscek, M., & Dominko, R. (2013) · ChemSusChem · doi:10.1002/cssc.201300142 · Cited by 286
Babu, G., Ababtain, K., Ng, K. Y. S., & Arava, L. M. R. (2015) · Scientific Reports · doi:10.1038/srep08763 · Cited by 209
Faber, M. S., Park, K., Cabán-Acevedo, M., Santra, P. K., & Jin, S. (2013) · The Journal of Physical Chemistry Letters · doi:10.1021/jz400642e · Cited by 206
Jeong, T.-G., Choi, D. S., Song, H., Choi, J., Park, S.-A., Oh, S. H., Kim, H., Jung, Y., & Kim, Y.-T. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.6b00603 · Cited by 197
Liang, J., Yin, L., Tang, X., Yang, H., Yan, W., Song, L., Cheng, H.-M., & Li, F. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b05647 · Cited by 163
An in-plane heterostructure of graphene and titanium carbide for efficient polysulfide confinement
Zhou, T., Zhao, Y., Zhou, G., Lv, W., Sun, P., Kang, F., Li, B., & Yang, Q.-H. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.07.012 · Cited by 161
Self-citationMa, Z., Li, Z., Hu, K., Liu, D., Huo, J., & Wang, S. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.04.139 · Cited by 152
Self-citationRaybaud, P., Kresse, G., Häfner, J., & Toulhoat, H. (1997) · Journal of Physics Condensed Matter · doi:10.1088/0953-8984/9/50/013 · Cited by 151
Yao, C., Li, F., Li, X., & Xia, D. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm32866f · Cited by 100
Yan, J., Liu, X., He, Q., Li, W., Zhou, Y., Yao, M., & Li, B. (2015) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b02533 · Cited by 83
Liang, Q., Li, Z., Bai, Y., Huang, Z., Kang, F., & Yang, Q. (2016) · Small · doi:10.1002/smll.201603182 · Cited by 74
Self-citationLong-life, high-efficiency lithium/sulfur batteries from sulfurized carbon nanotube cathodes
Yan, J., Liu, X., Wang, X., & Li, B. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta00286a · Cited by 72
Long-Life, High-Efficiency Lithium–Sulfur Battery from a Nanoassembled Cathode
Yan, J., Liu, X., Yao, M., Wang, X., Wafle, T. K., & Li, B. (2015) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b01780 · Cited by 66
Graphene-Based Porous Catalyst with High Stability and Activity for the Methanol Oxidation Reaction
Zhang, L., Shao, J., Zhang, W., Zhang, C., Zheng, X., Du, H., & Yang, Q. (2014) · The Journal of Physical Chemistry C · doi:10.1021/jp508541b · Cited by 21
Self-citation
Cited by
Zhang, L., Liu, D., Muhammad, Z., Wan, F., Xie, W., Wang, Y., Song, L., Niu, Z., & Chen, J. (2019) · Advanced Materials · doi:10.1002/adma.201903955 · Cited by 713
Self-citationYuan, H., Peng, H., Li, B., Xie, J., Kong, L., Zhao, M., Chen, X., Huang, J., & Zhang, Q. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201802768 · Cited by 626
Current Status and Future Prospects of Metal–Sulfur Batteries
Chung, S., & Manthiram, A. (2019) · Advanced Materials · doi:10.1002/adma.201901125 · Cited by 622
Zhou, G., Zhao, S., Wang, T., Yang, S.-Z., Johannessen, B., Chen, H., Liu, C., Ye, Y., Wu, Y., Peng, Y., et al. (2020) · Nano Letters · doi:10.1021/acs.nanolett.9b04719 · Cited by 605
Self-citationLim, W., Kim, S., Jo, C., & Lee, J. (2019) · Angewandte Chemie International Edition · doi:10.1002/anie.201902413 · Cited by 535
Metadata
- Authors
- Liu, D., Zhang, C., Zhou, G., Lv, W., Ling, G., Zhi, L., & Yang, Q.
- Venue
- Advanced Science
- Publisher
- Wiley
- Published
- 2017-09-05
- Volume
- 5
- Issue
- 1
- Pages
- 1700270-1700270
- ISSN
- 2198-3844 (ISSN-L)
- OpenAlex
- W2753050978
- Cited by
- 956
- References
- 66
- FWCI
- 35.35
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.