The DOI matches its Crossref record; 122 of the 122 references it cites were found in a registry or an index.
Confronting the Challenges in Lithium Anodes for Lithium Metal Batteries
Open accessAbstract
With the low redox potential of −3.04 V (vs SHE) and ultrahigh theoretical capacity of 3862 mAh g−1, lithium metal has been considered as promising anode material. However, lithium metal battery has ever suffered a trough in the past few decades due to its safety issues. Over the years, the limited energy density of the lithium‐ion battery cannot meet the growing demands of the advanced energy storage devices. Therefore, lithium metal anodes receive renewed attention, which have the potential to achieve high‐energy batteries. In this review, the history of the lithium anode is reviewed first. Then the failure mechanism of the lithium anode is analyzed, including dendrite, dead lithium, corrosion, and volume expansion of the lithium anode. Further, the strategies to alleviate the lithium anode issues in recent years are discussed emphatically. Eventually, remaining challenges of these strategies and possible research directions of lithium‐anode modification are presented to inspire innovation of lithium anode.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Issues and challenges facing rechargeable lithium batteries
Tarascon, J.-M., & Armand, M. (2001) · Nature · doi:10.1038/35104644 · Cited by 21,130
Electrical energy storage for the grid: A battery of choices
Dunn, B., Kamath, H., & Tarascon, J.-M. (2011) · Science · doi:10.1126/science.1212741 · Cited by 15,072
Challenges for Rechargeable Li Batteries
Goodenough, J. B., & Kim, Y. (2010) · Chemistry of Materials · doi:10.1021/cm901452z · Cited by 10,943
Nonaqueous Liquid Electrolytes for Lithium-Based Rechargeable Batteries
Xu, K. (2004) · Chemical Reviews · doi:10.1021/cr030203g · Cited by 7,437
Reviving the lithium metal anode for high-energy batteries
Lin, D., Liu, Y., & Cui, Y. (2017) · Nature Nanotechnology · doi:10.1038/nnano.2017.16 · Cited by 6,763
Lithium Batteries and Cathode Materials
Whittingham, M. S. (2004) · Chemical Reviews · doi:10.1021/cr020731c · Cited by 6,267
Lithium metal anodes for rechargeable batteries
Xu, W., Wang, J., Ding, F., Chen, X., Nasybulin, E., Zhang, Y., & Zhang, J.-G. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee40795k · Cited by 4,704
Pathways for practical high-energy long-cycling lithium metal batteries
Liu, J., Bao, Z., Cui, Y., Dufek, E. J., Goodenough, J. B., Khalifah, P., Li, Q., Liaw, B. Y., Liu, P., Manthiram, A., et al. (2019) · Nature Energy · doi:10.1038/s41560-019-0338-x · Cited by 3,412
Guidelines and trends for next-generation rechargeable lithium and lithium-ion batteries
Wu, F., Maier, J., & Yu, Y. (2020) · Chemical Society Reviews · doi:10.1039/c7cs00863e · Cited by 2,229
A review of the electrochemical performance of alloy anodes for lithium-ion batteries
Zhang, W.-J. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.07.020 · Cited by 2,140
Dendrite-Free Lithium Deposition via Self-Healing Electrostatic Shield Mechanism
Ding, F., Xu, W., Graff, G. L., Zhang, J., Sushko, M. L., Chen, X., Shao, Y., Engelhard, M. H., Nie, Z., Xiao, J., et al. (2013) · Journal of the American Chemical Society · doi:10.1021/ja312241y · Cited by 2,107
Electrical Energy Storage and Intercalation Chemistry
Whittingham, M. S. (1976) · Science · doi:10.1126/science.192.4244.1126 · Cited by 1,919
Albertus, P., Babinec, S., Litzelman, S., & Newman, A. (2017) · Nature Energy · doi:10.1038/s41560-017-0047-2 · Cited by 1,888
Lee, Y.-G., Fujiki, S., Jung, C., Suzuki, N., Yashiro, N., Omoda, R., Ko, D.-S., Shiratsuchi, T., Sugimoto, T., Ryu, S., et al. (2020) · Nature Energy · doi:10.1038/s41560-020-0575-z · Cited by 1,708
The Impact of Elastic Deformation on Deposition Kinetics at Lithium/Polymer Interfaces
Monroe, C., & Newman, J. (2005) · Journal of The Electrochemical Society · doi:10.1149/1.1850854 · Cited by 1,701
Fluoroethylene Carbonate Additives to Render Uniform Li Deposits in Lithium Metal Batteries
Zhang, X., Cheng, X., Chen, X., Yan, C., & Zhang, Q. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201605989 · Cited by 1,699
Aurbach, D. (2002) · Solid State Ionics · doi:10.1016/s0167-2738(02)00080-2 · Cited by 1,697
Advancing Lithium Metal Batteries
Liu, B., Zhang, J.-G., & Xu, W. (2018) · Joule · doi:10.1016/j.joule.2018.03.008 · Cited by 1,647
Self-citationElectrochemical aspects of the generation of ramified metallic electrodeposits
Chazalviel, J.-N. (1990) · Physical Review A · doi:10.1103/physreva.42.7355 · Cited by 1,402
Electrolyte additive enabled fast charging and stable cycling lithium metal batteries
Zheng, J., Engelhard, M. H., Mei, D., Jiao, S., Polzin, B. J., Zhang, J.-G., & Xu, W. (2017) · Nature Energy · doi:10.1038/nenergy.2017.12 · Cited by 1,343
Stable cycling of high-voltage lithium metal batteries in ether electrolytes
Jiao, S., Ren, X., Cao, R., Engelhard, M. H., Liu, Y., Hu, D., Mei, D., Zheng, J., Zhao, W., Li, Q., et al. (2018) · Nature Energy · doi:10.1038/s41560-018-0199-8 · Cited by 1,149
Encyclopedia of Electrochemical Power Sources
(2009) · Elsevier eBooks · doi:10.1016/c2009-1-28358-4 · Cited by 1,145
Localized High-Concentration Sulfone Electrolytes for High-Efficiency Lithium-Metal Batteries
Ren, X., Chen, S., Lee, H., Mei, D., Engelhard, M. H., Burton, S. D., Zhao, W., Zheng, J., Li, Q., Ding, M. S., et al. (2018) · Chem · doi:10.1016/j.chempr.2018.05.002 · Cited by 1,024
Dendritic growth mechanisms in lithium/polymer cells
Brissot, C., Rosso, M., Chazalviel, J.-N., & Lascaud, S. (1999) · Journal of Power Sources · doi:10.1016/s0378-7753(98)00242-0 · Cited by 945
A review of lithium deposition in lithium-ion and lithium metal secondary batteries
Li, Z., Huang, J., Yann Liaw, B., Metzler, V., & Zhang, J. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.12.099 · Cited by 938
Khurana, R., Schaefer, J. L., Archer, L. A., & Coates, G. W. (2014) · Journal of the American Chemical Society · doi:10.1021/ja502133j · Cited by 880
Tailoring electrolyte solvation for Li metal batteries cycled at ultra-low temperature
Holoubek, J., Liu, H., Wu, Z., Yin, Y., Xing, X., Cai, G., Yu, S., Zhou, H., Pascal, T. A., Chen, Z., et al. (2021) · Nature Energy · doi:10.1038/s41560-021-00783-z · Cited by 851
Cryo-STEM mapping of solid–liquid interfaces and dendrites in lithium-metal batteries
Zachman, M. J., Tu, Z., Choudhury, S., Archer, L. A., & Kourkoutis, L. F. (2018) · Nature · doi:10.1038/s41586-018-0397-3 · Cited by 823
Failure Mechanism for Fast‐Charged Lithium Metal Batteries with Liquid Electrolytes
Lu, D., Shao, Y., Lozano, T., Bennett, W. D., Graff, G. L., Polzin, B., Zhang, J., Engelhard, M. H., Saenz, N. T., Henderson, W. A., et al. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201400993 · Cited by 740
Fluorine-donating electrolytes enable highly reversible 5-V-class Li metal batteries
Suo, L., Xue, W., Gobet, M., Greenbaum, S. G., Wang, C., Chen, Y., Yang, W., Li, Y., & Li, J. (2018) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1712895115 · Cited by 679
Towards better Li metal anodes: Challenges and strategies
Zhang, Y., Zuo, T.-T., Popovic, J., Lim, K., Yin, Y.-X., Maier, J., & Guo, Y.-G. (2020) · Materials Today · doi:10.1016/j.mattod.2019.09.018 · Cited by 653
Yan, C., Yao, Y., Chen, X., Cheng, X., Zhang, X., Huang, J., & Zhang, Q. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201807034 · Cited by 635
How lithium dendrites form in liquid batteries
Xiao, J. (2019) · Science · doi:10.1126/science.aay8672 · Cited by 635
Wood, K. N., Noked, M., & Dasgupta, N. P. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.6b00650 · Cited by 558
A consideration of the morphology of electrochemically deposited lithium in an organic electrolyte
Yamaki, J.-I., Tobishima, S.-I., Hayashi, K., Saito, K., Nemoto, Y., & Arakawa, M. (1998) · Journal of Power Sources · doi:10.1016/s0378-7753(98)00067-6 · Cited by 483
Stabilizing lithium metal using ionic liquids for long-lived batteries
Basile, A., Bhatt, A. I., & O’Mullane, A. P. (2016) · Nature Communications · doi:10.1038/ncomms11794 · Cited by 467
Chen, X., Hou, T., Persson, K. A., & Zhang, Q. (2019) · Materials Today · doi:10.1016/j.mattod.2018.04.007 · Cited by 446
Lithium metal stripping/plating mechanisms studies: A metallurgical approach
Gireaud, L., Grugeon, S., Laruelle, S., Yrieix, B., & Tarascon, J.-M. (2006) · Electrochemistry Communications · doi:10.1016/j.elecom.2006.07.037 · Cited by 436
(2011) · Wiley eBooks · doi:10.1002/9783527637188 · Cited by 436
Wan, M., Kang, S., Wang, L., Lee, H.-W., Zheng, G. W., Cui, Y., & Sun, Y. (2020) · Nature Communications · doi:10.1038/s41467-020-14550-3 · Cited by 397
Free-Standing Hollow Carbon Fibers as High-Capacity Containers for Stable Lithium Metal Anodes
Liu, L., Yin, Y.-X., Li, J.-Y., Li, N.-W., Zeng, X.-X., Ye, H., Guo, Y.-G., & Wan, L.-J. (2017) · Joule · doi:10.1016/j.joule.2017.06.004 · Cited by 391
Aguesse, F., Manalastas, W. W., Buannic, L., del Amo, J. M. L., Singh, G., Llordés, A., & Kilner, J. A. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b13925 · Cited by 386
Historical development of secondary lithium batteries
BRANDT, K. (1994) · Solid State Ionics · doi:10.1016/0167-2738(94)90408-1 · Cited by 366
Yu, L., Chen, S., Lee, H., Zhang, L., Engelhard, M. H., Li, Q., Jiao, S., Liu, J., Xu, W., & Zhang, J.-G. (2018) · ACS Energy Letters · doi:10.1021/acsenergylett.8b00935 · Cited by 363
Ye, H., Zheng, Z., Yao, H., Liu, S., Zuo, T., Wu, X., Yin, Y., Li, N., Gu, J., Cao, F., et al. (2019) · Angewandte Chemie International Edition · doi:10.1002/anie.201811955 · Cited by 360
Crumpled Graphene Balls Stabilized Dendrite-free Lithium Metal Anodes
Liu, S., Wang, A., Li, Q., Wu, J., Chiou, K., Huang, J., & Luo, J. (2018) · Joule · doi:10.1016/j.joule.2017.11.004 · Cited by 347
Self-citationAdvanced Liquid Electrolytes for Rechargeable Li Metal Batteries
Jie, Y., Ren, X., Cao, R., Cai, W., & Jiao, S. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201910777 · Cited by 330
High Interfacial-Energy Interphase Promoting Safe Lithium Metal Batteries
Liu, S., Ji, X., Yue, J., Hou, S., Wang, P., Cui, C., Chen, J., Shao, B., Li, J., Han, F., et al. (2020) · Journal of the American Chemical Society · doi:10.1021/jacs.9b11750 · Cited by 318
Luo, D., Zheng, L., Zhang, Z., Li, M., Chen, Z., Cui, R., Shen, Y., Li, G., Feng, R., Zhang, S., et al. (2021) · Nature Communications · doi:10.1038/s41467-020-20339-1 · Cited by 318
Self-citationUnderstanding and suppression strategies toward stable Li metal anode for safe lithium batteries
Yasin, G., Arif, M., Mehtab, T., Lu, X., Yu, D., Muhammad, N., Nazir, M. T., & Song, H. (2020) · Energy Storage Materials · doi:10.1016/j.ensm.2019.09.020 · Cited by 317
Wang, X., Kerr, R., Chen, F., Goujon, N., Pringle, J. M., Mecerreyes, D., Forsyth, M., & Howlett, P. C. (2020) · Advanced Materials · doi:10.1002/adma.201905219 · Cited by 298
How Does External Pressure Shape Li Dendrites in Li Metal Batteries?
Shen, X., Zhang, R., Shi, P., Chen, X., & Zhang, Q. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202003416 · Cited by 279
Live Scanning Electron Microscope Observations of Dendritic Growth in Lithium/Polymer Cells
Dollé, M., Sannier, L., Beaudoin, B., Trentin, M., & Tarascon, J.-M. (2002) · Electrochemical and Solid-State Letters · doi:10.1149/1.1519970 · Cited by 278
Hao, X., Zhao, Q., Su, S., Zhang, S., Ma, J., Shen, L., Yu, Q., Zhao, L., Liu, Y., Kang, F., et al. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201901604 · Cited by 272
Engineering of lithium-metal anodes towards a safe and stable battery
Wang, L., Zhou, Z., Yan, X., Hou, F., Wen, L., Luo, W., Liang, J., & Dou, S. X. (2018) · Energy Storage Materials · doi:10.1016/j.ensm.2018.02.014 · Cited by 270
Aurbach, D. (1999) · CRC Press eBooks · doi:10.1201/9780824741389 · Cited by 268
Jiang, Z., Wang, S., Chen, X., Yang, W., Yao, X., Hu, X., Han, Q., & Wang, H. (2020) · Advanced Materials · doi:10.1002/adma.201906221 · Cited by 266
Vacuum distillation derived 3D porous current collector for stable lithium–metal batteries
An, Y., Fei, H., Zeng, G., Xu, X., Ci, L., Xi, B., Xiong, S., Feng, J., & Qian, Y. (2018) · Nano Energy · doi:10.1016/j.nanoen.2018.03.036 · Cited by 258
High-capacity rechargeable batteries based on deeply cyclable lithium metal anodes
Shi, Q., Zhong, Y., Wu, M., Wang, H., & Wang, H. (2018) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1803634115 · Cited by 258
Strategies in Structure and Electrolyte Design for High‐Performance Lithium Metal Batteries
Qin, K., Holguin, K., Mohammadiroudbari, M., Huang, J., Kim, E. Y. S., Hall, R., & Luo, C. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202009694 · Cited by 246
High-Energy Li Metal Battery with Lithiated Host
Chen, L., Fan, X., Ji, X., Chen, J., Hou, S., & Wang, C. (2019) · Joule · doi:10.1016/j.joule.2018.11.025 · Cited by 244
Lithium Difluorophosphate‐Based Dual‐Salt Low Concentration Electrolytes for Lithium Metal Batteries
Zheng, H., Xiang, H., Jiang, F., Liu, Y., Sun, Y., Liang, X., Feng, Y., & Yu, Y. (2020) · Advanced Energy Materials · doi:10.1002/aenm.202001440 · Cited by 244
Li, Y., Zhang, W., Dou, Q., Wong, K. W., & Ng, K. M. (2019) · Journal of Materials Chemistry A · doi:10.1039/c8ta11449h · Cited by 241
Robust Pinhole-free Li3N Solid Electrolyte Grown from Molten Lithium
Li, Y., Sun, Y., Pei, A., Chen, K., Vailionis, A., Li, Y., Zheng, G., Sun, J., & Cui, Y. (2018) · ACS Central Science · doi:10.1021/acscentsci.7b00480 · Cited by 236
Cyclic carbonate for highly stable cycling of high voltage lithium metal batteries
Su, C.-C., He, M., Amine, R., Chen, Z., Sahore, R., Dietz Rago, N., & Amine, K. (2019) · Energy Storage Materials · doi:10.1016/j.ensm.2018.11.003 · Cited by 208
Xiao, L., Zeng, Z., Liu, X., Fang, Y., Jiang, X., Shao, Y., Zhuang, L., Ai, X., Yang, H., Cao, Y., et al. (2019) · ACS Energy Letters · doi:10.1021/acsenergylett.8b02527 · Cited by 202
Li, Y., Sun, Z., Liu, D., Gao, Y., Wang, Y., Bu, H., Li, M., Zhang, Y., Gao, G., & Ding, S. (2020) · Journal of Materials Chemistry A · doi:10.1039/c9ta11542k · Cited by 200
Pan, J., Cheng, Y.-T., & Qi, Y. (2015) · Physical Review B · doi:10.1103/physrevb.91.134116 · Cited by 198
Meng, J., Chu, F., Hu, J., & Li, C. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201902220 · Cited by 198
Nanocellulose Modified Polyethylene Separators for Lithium Metal Batteries
Pan, R., Xu, X., Sun, R., Wang, Z., Lindh, J., Edström, K., Strømme, M., & Nyholm, L. (2018) · Small · doi:10.1002/smll.201704371 · Cited by 195
Adiponitrile (C6H8N2): A New Bi‐Functional Additive for High‐Performance Li‐Metal Batteries
Lee, S. H., Hwang, J., Park, S., Park, G., & Sun, Y. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201902496 · Cited by 193
Li, S., Liu, Q., Zhou, J., Pan, T., Gao, L., Zhang, W., Fan, L., & Lu, Y. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201808847 · Cited by 191
Lithium Difluorophosphate as a Dendrite-Suppressing Additive for Lithium Metal Batteries
Shi, P., Zhang, L., Xiang, H., Liang, X., Sun, Y., & Xu, W. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b05185 · Cited by 190
Suppressing Dendritic Lithium Formation Using Porous Media in Lithium Metal-Based Batteries
Li, N., Wei, W., Xie, K., Tan, J., Zhang, L., Luo, X., Yuan, K., Song, Q., Li, H., Shen, C., et al. (2018) · Nano Letters · doi:10.1021/acs.nanolett.8b00183 · Cited by 186
Multilayer-graphene-stabilized lithium deposition for anode-Free lithium-metal batteries
Assegie, A. A., Chung, C.-C., Tsai, M.-C., Su, W.-N., Chen, C.-W., & Hwang, B.-J. (2019) · Nanoscale · doi:10.1039/c8nr06980h · Cited by 180
Chen, S., Zhang, J., Nie, L., Hu, X., Huang, Y., Yu, Y., & Liu, W. (2021) · Advanced Materials · doi:10.1002/adma.202002325 · Cited by 176
Ko, J., & Yoon, Y. S. (2019) · Ceramics International · doi:10.1016/j.ceramint.2018.09.287 · Cited by 174
The dendrite growth in 3D structured lithium metal anodes: Electron or ion transfer limitation?
Zhang, R., Shen, X., Cheng, X.-B., & Zhang, Q. (2019) · Energy Storage Materials · doi:10.1016/j.ensm.2019.03.029 · Cited by 174
Li, X., Zheng, J., Ren, X., Engelhard, M. H., Zhao, W., Li, Q., Zhang, J., & Xu, W. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201703022 · Cited by 169
Wang, Q., Yang, C., Yang, J., Wu, K., Hu, C., Lu, J., Liu, W., Sun, X., Qiu, J., & Zhou, H. (2019) · Advanced Materials · doi:10.1002/adma.201903248 · Cited by 162
Self-citationNacre‐Inspired Composite Electrolytes for Load‐Bearing Solid‐State Lithium‐Metal Batteries
Li, A., Liao, X., Zhang, H., Shi, L., Wang, P., Cheng, Q., Borovilas, J., Li, Z., Huang, W., Fu, Z., et al. (2020) · Advanced Materials · doi:10.1002/adma.201905517 · Cited by 162
Design of a Multifunctional Interlayer for NASCION‐Based Solid‐State Li Metal Batteries
Xiong, S., Liu, Y., Jankowski, P., Liu, Q., Nitze, F., Xie, K., Song, J., & Matic, A. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202001444 · Cited by 162
Lithium electrode cycleability and morphology dependence on current density
Arakawa, M., Tobishima, S.-I., Nemoto, Y., Ichimura, M., & Yamaki, J.-I. (1993) · Journal of Power Sources · doi:10.1016/0378-7753(93)80099-b · Cited by 161
Yue, X.-Y., Wang, W.-W., Wang, Q.-C., Meng, J.-K., Wang, X.-X., Song, Y., Fu, Z.-W., Wu, X.-J., & Zhou, Y.-N. (2019) · Energy Storage Materials · doi:10.1016/j.ensm.2018.12.007 · Cited by 161
Self-citationWen, J., Huang, Y., Duan, J., Wu, Y., Luo, W., Zhou, L., Hu, C., Huang, L., Zheng, X., Yang, W., et al. (2019) · ACS Nano · doi:10.1021/acsnano.9b08803 · Cited by 160
Duan, H., Zhang, J., Chen, X., Zhang, X.-D., Li, J.-Y., Huang, L.-B., Zhang, X., Shi, J.-L., Yin, Y.-X., Zhang, Q., et al. (2018) · Journal of the American Chemical Society · doi:10.1021/jacs.8b10488 · Cited by 158
Rational design of robust-flexible protective layer for safe lithium metal battery
Li, S., Fan, L., & Lü, Y. (2018) · Energy storage materials · doi:10.1016/j.ensm.2018.09.015 · Cited by 148
Li, X., Zheng, J., Engelhard, M., Mei, D., Li, Q., Jiao, S., Liu, N., Zhao, W., Zhang, J., & Xu, W. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b15117 · Cited by 145
A Dendrite‐Free Lithium/Carbon Nanotube Hybrid for Lithium‐Metal Batteries
Wang, Z. Y., Lu, Z. X., Guo, W., Luo, Q., Yin, Y. H., Liu, X., Li, Y. S., Xia, B. Y., & Wu, Z. P. (2020) · Advanced Materials · doi:10.1002/adma.202006702 · Cited by 138
Dynamic Intelligent Cu Current Collectors for Ultrastable Lithium Metal Anodes
Chen, J., Zhao, J. W., Lei, L., Li, P., Chen, J., Zhang, Y., Wang, Y., Ma, Y., & Wang, D. (2020) · Nano Letters · doi:10.1021/acs.nanolett.0c00316 · Cited by 135
Trinh, N. D., Lepage, D., Aymé‐Perrot, D., Badia, A., Dollé, M., & Rochefort, D. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201801737 · Cited by 134
Sahalie, N. A., Assegie, A. A., Su, W.-N. J., Wondimkun, Z. T., Jote, B. A., Thirumalraj, B., Huang, C., Yang, Y., & Hwang, B. (2019) · Journal of Power Sources · doi:10.1016/j.jpowsour.2019.226912 · Cited by 134
Wu, J., & Guo, X. (2019) · Small · doi:10.1002/smll.201804413 · Cited by 129
Self-citationCheng, Y., Ke, X., Chen, Y.-M., Huang, X.-Y., Shi, Z.-C., & Guo, Z.-P. (2019) · Nano Energy · doi:10.1016/j.nanoen.2019.103854 · Cited by 122
Yi, J., Chen, J., Zheng, Y., et al. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201901796 · Cited by 122
Electrical Conductivity Gradient Based on Heterofibrous Scaffolds for Stable Lithium‐Metal Batteries
Hong, S., Jung, D., Kim, J., Lee, Y., Cho, S., Joo, S. H., Lee, H., Lee, K., & Lee, S. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201908868 · Cited by 122
Xue, P., Sun, C., Li, H., Liang, J., & Lai, C. (2019) · Advanced Science · doi:10.1002/advs.201900943 · Cited by 119
Xu, G. J., Li, J., Wang, C., Du, X., Lu, D., Xie, B., Wang, X., Lu, C., Liu, H., Dong, S., et al. (2021) · Angewandte Chemie International Edition · doi:10.1002/anie.202013812 · Cited by 112
Sandwich-structured nano/micro fiber-based separators for lithium metal batteries
Pan, R., Sun, R., Wang, Z., Lindh, J., Edström, K., Strømme, M., & Nyholm, L. (2018) · Nano Energy · doi:10.1016/j.nanoen.2018.11.005 · Cited by 111
Interfacial Atomistic Mechanisms of Lithium Metal Stripping and Plating in Solid‐State Batteries
Yang, M., Liu, Y., Nolan, A. M., et al. (2021) · Advanced Materials · doi:10.1002/adma.202008081 · Cited by 109
Sun, Y., Yang, T.-Z., Ji, H., Zhou, J.-Q., Wang, Z.-K., Qian, T., & Yan, C.-L. (2020) · Advanced Energy Materials · doi:10.1002/aenm.202002373 · Cited by 106
Quantifying the dependence of dead lithium losses on the cycling period in lithium metal batteries
Aryanfar, A., Brooks, D. J., Colussi, A. J., & Hoffmann, M. R. (2014) · Physical Chemistry Chemical Physics · doi:10.1039/c4cp03590a · Cited by 102
Matsuda, S., Kubo, Y., Uosaki, K., & Nakanishi, S. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.7b00149 · Cited by 102
Fire-Retardant Phosphate-Based Electrolytes for High-Performance Lithium Metal Batteries
Dong, Y., Zhang, N., Li, C., Zhang, Y., Jia, M., Wang, Y., Zhao, Y., Jiao, L., Cheng, F., & Xu, J. (2019) · ACS Applied Energy Materials · doi:10.1021/acsaem.9b00027 · Cited by 98
Ding, C., Fu, X., Li, H., Yang, J., Lan, J., Yu, Y., Zhong, W.-H. K., & Yang, X. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201904547 · Cited by 98
Metal-organic framework nanosheets-guided uniform lithium deposition for metallic lithium batteries
Jiang, Z., Liu, T., Yan, L., Liu, J., Dong, F., Ling, M., Liang, C., & Lin, Z. (2017) · Energy storage materials · doi:10.1016/j.ensm.2017.11.003 · Cited by 97
Xie, Z., Wu, Z., An, X., Yue, X., Yoshida, A., Du, X. L., Hao, X., Abudula, A., & Guan, G. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.124789 · Cited by 95
Xu, S., Chen, K., Dasgupta, N. P., et al. (2019) · Journal of The Electrochemical Society · doi:10.1149/2.0991914jes · Cited by 89
A sealed optical cell for the study of lithium-electrode|electrolyte interfaces
Howlett, P. C., MacFarlane, D. R., & Hollenkamp, A. F. (2003) · Journal of Power Sources · doi:10.1016/s0378-7753(02)00603-1 · Cited by 82
Karimi, N., Zarrabeitia, M., Mariani, A., Gatti, D., Varzi, A., & Passerini, S. (2020) · Advanced Energy Materials · doi:10.1002/aenm.202003521 · Cited by 80
Park, H. E., Hong, C. H., & Yoon, W. Y. (2008) · Journal of Power Sources · doi:10.1016/j.jpowsour.2007.12.081 · Cited by 75
A smart, anti-piercing and eliminating-dendrite lithium metal battery
Ye, M.-H., Xiao, Y.-K., Cheng, Z.-H., Cui, L.-F., Jiang, L., & Qu, L. (2018) · Nano Energy · doi:10.1016/j.nanoen.2018.04.078 · Cited by 71
Exploiting self-heat in a lithium metal battery for dendrite healing
Hundekar, P., Basu, S., Pan, J.-L., Bartolucci, S. F., Narayanan, S., Yang, Z., & Koratkar, N. A. (2019) · Energy storage materials · doi:10.1016/j.ensm.2019.04.013 · Cited by 71
Lee, J., Shin, M., Hong, D., & Park, S. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201803722 · Cited by 64
Pham, T. D., Faheem, A. B., Chun, S. Y., Rho, J., Kwak, K., & Lee, K. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202003520 · Cited by 61
Balo, L., Gupta, H., Singh, S. K., Singh, S. K., Kataria, S., & Singh, R. K. (2018) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2018.04.022 · Cited by 48
Park, S.-J., Hwang, J., & Sun, Y. (2019) · Journal of Materials Chemistry A · doi:10.1039/c9ta03713f · Cited by 44
Simple and Effective Gas-Phase Doping for Lithium Metal Protection in Lithium Metal Batteries
Moon, S., Park, H., Yoon, G., et al. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b03027 · Cited by 41
Highly stable lithium metal battery with an applied three-dimensional mesh structure interlayer
Kim, H., Gong, Y. J., Yoo, J., & Kim, Y. S. (2018) · Journal of Materials Chemistry A · doi:10.1039/c8ta05069d · Cited by 38
Jin, T., Wang, Y., Hui, Z., Qie, B., Li, A., Paley⧓, D. W., Xu, B., Wang, X., Chitu, A. M., Zhai, H., et al. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b22156 · Cited by 37
Uniform lithium electrodeposition for stable lithium-metal batteries
He, X., Yang, Y., Stan, M. C., Wang, J., Hou, X., Yan, B., Li, J., Zhang, T., Paillard, E. E., Świętosławski, M., et al. (2019) · Nano Energy · doi:10.1016/j.nanoen.2019.104172 · Cited by 37
Tong, B., Chen, X., Chen, L., Zhou, Z., & Peng, Z. (2018) · ACS Applied Energy Materials · doi:10.1021/acsaem.8b00821 · Cited by 27
Cited by
Filler‐Integrated Composite Polymer Electrolyte for Solid‐State Lithium Batteries
Liu, S., Liu, W., Ba, D., Zhao, Y., Ye, Y., Li, Y., & Liu, J. (2023) · Advanced Materials · doi:10.1002/adma.202110423 · Cited by 542
Strategies toward the development of high-energy-density lithium batteries
Niu, H., Zhang, N., Lu, Y., Zhang, Z., Li, M., Liu, J., Zhang, N., Song, W., Zhao, Y., & Miao, Z. (2024) · Journal of Energy Storage · doi:10.1016/j.est.2024.111666 · Cited by 327
Metadata
- Authors
- Wang, Q., Liu, B., Shen, Y., Wu, J., Zhao, Z., Zhong, C., & Hu, W.
- Venue
- Advanced Science
- Publisher
- Wiley
- Published
- 2021-07
- Volume
- 8
- Issue
- 17
- Pages
- e2101111-e2101111
- ISSN
- 2198-3844 (ISSN-L)
- OpenAlex
- W3173727559
- Cited by
- 531
- References
- 122
- FWCI
- 22.32
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.