The DOI matches its Crossref record; 47 of the 47 references it cites were found in a registry or an index.
A Polyaniline‐Coated Sulfur/Carbon Composite with an Enhanced High‐Rate Capability as a Cathode Material for Lithium/Sulfur Batteries
Abstract
Polyaniline‐coated sulfur/conductive‐carbon‐black (PANI@S/C) composites with different contents of sulfur are prepared via two facile processes including ball‐milling and thermal treatment of the conductive carbon black and sublimed sulfur, followed by an in situ chemical oxidative polymerization of the aniline monomer in the presence of the S/C composite and ammonium persulfate. The microstructure and electrochemical performance of the as‐prepared composites are investigated systematically. It is demonstrated that the polyaniline, with a thickness of ≈5–10 nm, is coated uniformly onto the surface of the S/C composite forming a core/shell structure. The PANI@S/C composite with 43.7 wt% sulfur presents the optimum electrochemical performance, including a large reversible capacity, a good coulombic efficiency, and a high active‐sulfur utilization. The formation of the unique core/shell structure in the PANI@S/C composites is responsible for the improvement of the electrochemical performance. In particular, the high‐rate charge/discharge capability of the PANI@S/C composites is excellent due to a synergistic effect on the high electrical conductivity from both the conductive carbon black in the matrix and the PANI on the surface. Even at an ultrahigh rate (10C), a maximum discharge capacity of 635.5 mA h per g of sulfur is still retained for the PANI@S/C composite after activation, and the discharge capacity retention is over 60% after 200 cycles.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Issues and challenges facing rechargeable lithium batteries
Tarascon, J.-M., & Armand, M. (2001) · Nature · doi:10.1038/35104644 · Cited by 21,130
Li-O2 and Li-S batteries with high energy storage
Bruce, P. G., Freunberger, S. A., Hardwick, L. J., & Tarascon, J.-M. (2012) · Nature Materials · doi:10.1038/nmat3191 · Cited by 9,479
Lithium Batteries and Cathode Materials
Whittingham, M. S. (2004) · Chemical Reviews · doi:10.1021/cr020731c · Cited by 6,267
A highly ordered nanostructured carbon–sulphur cathode for lithium–sulphur batteries
Ji, X., Lee, K. T., & Nazar, L. F. (2009) · Nature Materials · doi:10.1038/nmat2460 · Cited by 5,988
Lithium-ion batteries. A look into the future
Scrosati, B., Hassoun, J., & Sun, Y.-K. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01388b · Cited by 2,595
Metal–Air Batteries with High Energy Density: Li–Air versus Zn–Air
Lee, J., Tai Kim, S., Cao, R., Choi, N., Liu, M., Lee, K. T., & Cho, J. (2011) · Advanced Energy Materials · doi:10.1002/aenm.201000010 · Cited by 2,286
Wang, H., Yang, Y., Liang, Y., Robinson, J. T., Li, Y., Jackson, A., Cui, Y., & Dai, H. (2011) · Nano Letters · doi:10.1021/nl200658a · Cited by 2,119
Polysulfide Shuttle Study in the Li/S Battery System
Mikhaylik, Y. V., & Akridge, J. R. (2004) · Journal of The Electrochemical Society · doi:10.1149/1.1806394 · Cited by 2,115
Porous Hollow Carbon@Sulfur Composites for High‐Power Lithium–Sulfur Batteries
Jayaprakash, N., Shen, J., Moganty, S. S., Corona, A., & Archer, L. A. (2011) · Angewandte Chemie International Edition · doi:10.1002/anie.201100637 · Cited by 1,811
Electrochemically Active Polymers for Rechargeable Batteries
Novák, P., Müller, K., Santhanam, K. S. V., & Haas, O. (1997) · Chemical Reviews · doi:10.1021/cr941181o · Cited by 1,618
Cited by
Rechargeable Lithium–Sulfur Batteries
Manthiram, A., Fu, Y., Chung, S.-H., Zu, C., & Su, Y.-S. (2014) · Chemical Reviews · doi:10.1021/cr500062v · Cited by 4,665
More Reliable Lithium‐Sulfur Batteries: Status, Solutions and Prospects
Fang, R., Zhao, S., Sun, Z., Wang, D., Cheng, H., & Li, F. (2017) · Advanced Materials · doi:10.1002/adma.201606823 · Cited by 1,785
Review on High‐Loading and High‐Energy Lithium–Sulfur Batteries
Peng, H., Huang, J., Cheng, X., & Zhang, Q. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700260 · Cited by 1,746
Lithium–Sulfur Batteries: Progress and Prospects
Manthiram, A., Chung, S., & Zu, C. (2015) · Advanced Materials · doi:10.1002/adma.201405115 · Cited by 1,620
Wang, Z., Dong, Y., Li, H., Zhao, Z., Bin Wu, H., Hao, C., Liu, S., Qiu, J., & Lou, X. W. (2014) · Nature Communications · doi:10.1038/ncomms6002 · Cited by 1,059
Li, G., Sun, J., Hou, W., Jiang, S., Huang, Y., & Geng, J. (2016) · Nature Communications · doi:10.1038/ncomms10601 · Cited by 806
Self-citationYolk–Shell Structure of Polyaniline-Coated Sulfur for Lithium–Sulfur Batteries
Zhou, W., Yu, Y., Chen, H., DiSalvo, F. J., & Abruña, H. D. (2013) · Journal of the American Chemical Society · doi:10.1021/ja409508q · Cited by 782
Electrocatalytic Polysulfide Traps for Controlling Redox Shuttle Process of Li–S Batteries
Al Salem, H., Babu, G., V. Rao, C., & Arava, L. M. R. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b04472 · Cited by 753
High-Rate, Ultralong Cycle-Life Lithium/Sulfur Batteries Enabled by Nitrogen-Doped Graphene
Qiu, Y., Li, W., Zhao, W., Li, G., Hou, Y., Liu, M., Zhou, L., Ye, F., Li, H., Wei, Z., et al. (2014) · Nano Letters · doi:10.1021/nl5020475 · Cited by 738
Self-citationConversion cathodes for rechargeable lithium and lithium-ion batteries
Wu, F., & Yushin, G. (2017) · Energy & Environmental Science · doi:10.1039/c6ee02326f · Cited by 723
Tao, X., Wang, J., Ying, Z., Cai, Q., Zheng, G., Gan, Y., Huang, H., Xia, Y., Liang, C., Zhang, W., et al. (2014) · Nano Letters · doi:10.1021/nl502331f · Cited by 687
Polyaniline (PANi) based electrode materials for energy storage and conversion
Wang, H., Lin, J., & Shen, Z. X. (2016) · Journal of Science: Advanced Materials and Devices · doi:10.1016/j.jsamd.2016.08.001 · Cited by 631
Current Status and Future Prospects of Metal–Sulfur Batteries
Chung, S., & Manthiram, A. (2019) · Advanced Materials · doi:10.1002/adma.201901125 · Cited by 622
Li, Z., Jiang, Y., Yuan, L., Yi, Z., Wu, C., Liu, Y., Strasser, P., & Huang, Y. (2014) · ACS Nano · doi:10.1021/nn503220h · Cited by 590
Nanostructured energy materials for electrochemical energy conversion and storage: A review
Zhang, X., Cheng, X., & Zhang, Q. (2016) · Journal of Energy Chemistry · doi:10.1016/j.jechem.2016.11.003 · Cited by 516
Structural Design of Cathodes for Li‐S Batteries
Pope, M. A., & Aksay, I. A. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500124 · Cited by 500
Zhang, Z., Kong, L., Liu, S., Li, G., & Gao, X. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201602543 · Cited by 472
Self-citationNovel gel polymer electrolyte for high-performance lithium–sulfur batteries
Liu, M., Zhou, D., He, Y.-B., Fu, Y., Qin, X., Miao, C., Du, H., Li, B., Yang, Q.-H., Lin, Z., et al. (2016) · Nano Energy · doi:10.1016/j.nanoen.2016.02.008 · Cited by 465
A Review of Functional Binders in Lithium–Sulfur Batteries
Yuan, H., Huang, J., Peng, H., Titirici, M., Xiang, R., Chen, R., Liu, Q., & Zhang, Q. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201802107 · Cited by 438
Investigations of lithium–sulfur batteries using electrochemical impedance spectroscopy
Cañas, N. A., Hirose, K., Pascucci, B., Wagner, N., Friedrich, K. A., & Hiesgen, R. (2013) · Electrochimica Acta · doi:10.1016/j.electacta.2013.02.101 · Cited by 415
Li-S Batteries: Challenges, Achievements and Opportunities
Raza, H., Bai, S., Cheng, J., Majumder, S., Zhu, H., Liu, Q., Zheng, G., Li, X., & Chen, G. (2023) · Electrochemical Energy Reviews · doi:10.1007/s41918-023-00188-4 · Cited by 406
Lithium–sulfur batteries: from liquid to solid cells
Lin, Z., & Liang, C. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta04727c · Cited by 399
Yang, X., Zhang, L., Zhang, F., Huang, Y., & Chen, Y. (2014) · ACS Nano · doi:10.1021/nn501284q · Cited by 396
Sulfur Chemistry in Polymer and Materials Science
Mutlu, H., Ceper, E. B., Li, X., Yang, J., Dong, W., Ozmen, M. M., & Theato, P. (2019) · Macromolecular Rapid Communications · doi:10.1002/marc.201800650 · Cited by 395
A lithium anode protection guided highly-stable lithium–sulfur battery
Ma, G., Wen, Z., Wu, M., Shen, C., Wang, Q., Jin, J., & Wu, X. (2014) · Chem. Commun. · doi:10.1039/c4cc05535g · Cited by 382
Interfacial Assembly and Applications of Functional Mesoporous Materials
Duan, L., Wang, C., Zhang, W., Ma, B., Deng, Y., Li, W., & Zhao, D. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00236 · Cited by 368
A Revolution in Electrodes: Recent Progress in Rechargeable Lithium–Sulfur Batteries
Fang, X., & Peng, H. (2015) · Small · doi:10.1002/smll.201402354 · Cited by 346
Jiang, Y., Wei, M., Feng, J., Ma, Y., & Xiong, S. (2016) · Energy & Environmental Science · doi:10.1039/c5ee03262h · Cited by 326
Pang, Q., Liang, X., Kwok, C. Y., & Nazar, L. F. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0171514jes · Cited by 323
Han, F., Li, D., Li, W., Lei, C., Sun, Q., & Lu, A. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201202254 · Cited by 306
Electrospinning‐Based Strategies for Battery Materials
Li, X., Chen, W., Qian, Q., Huang, H., Chen, Y., Wang, Z., Chen, Q., Yang, J., Li, J., & Mai, Y. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202000845 · Cited by 302
A survey of hybrid energy devices based on supercapacitors
Gao, D., Luo, Z., Liu, C., & Fan, S. (2023) · Green Energy & Environment · doi:10.1016/j.gee.2022.02.002 · Cited by 301
High performance lithium–sulfur batteries: advances and challenges
Xu, G., Ding, B., Pan, J., Nie, P., Shen, L., & Zhang, X. (2014) · J. Mater. Chem. A · doi:10.1039/c4ta02097a · Cited by 297
Direct Synthesis of Few-Layer F-Doped Graphene Foam and Its Lithium/Potassium Storage Properties
Ju, Z., Zhang, S., Xing, Z., Zhuang, Q., Qiang, Y., & Qian, Y. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b04763 · Cited by 291
Cathode materials for lithium–sulfur batteries: a practical perspective
Eftekhari, A., & Kim, D.-W. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta00799j · Cited by 285
Chung, S., Han, P., Singhal, R., Kalra, V., & Manthiram, A. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500738 · Cited by 280
12 years roadmap of the sulfur cathode for lithium sulfur batteries (2009–2020)
Liu, T., Hu, H., Ding, X., Yuan, H., Jin, C., Nai, J., Liu, Y., Wang, Y., Wan, Y., & Tao, X. (2020) · Energy Storage Materials · doi:10.1016/j.ensm.2020.05.023 · Cited by 278
Reduced graphene oxide film as a shuttle-inhibiting interlayer in a lithium–sulfur battery
Wang, X., Wang, Z., & Chen, L. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.05.063 · Cited by 274
Graphene materials for lithium–sulfur batteries
Yu, M., Li, R., Wu, M., & Shi, G. (2015) · Energy Storage Materials · doi:10.1016/j.ensm.2015.08.004 · Cited by 268
A review on separators for lithium sulfur battery: Progress and prospects
Deng, N., Kang, W., Liu, Y., Ju, J., Wu, D., Li, L., Hassan, B. S., & Cheng, B. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.09.044 · Cited by 267
Wang, C., Su, K., Wan, W., Guo, H., Zhou, H., Chen, J., Zhang, X., & Huang, Y. (2014) · J. Mater. Chem. A · doi:10.1039/c3ta14921h · Cited by 263
Hierarchical carbon nanocages confining high-loading sulfur for high-rate lithium–sulfur batteries
Lyu, Z., Xu, D., Yang, L., Che, R., Feng, R., Zhao, J., Li, Y., Wu, Q., Wang, X., & Hu, Z. (2015) · Nano Energy · doi:10.1016/j.nanoen.2015.01.033 · Cited by 258
Recent research trends in Li–S batteries
Kumar, R., Liu, J., Hwang, J.-Y., & Sun, Y.-K. (2018) · Journal of Materials Chemistry A · doi:10.1039/c8ta01483c · Cited by 254
Metadata
- Authors
- Li, G., Li, G., Ye, S., & Gao, X.
- Venue
- Advanced Energy Materials
- Publisher
- Wiley
- Published
- 2012-05-11
- Volume
- 2
- Issue
- 10
- Pages
- 1238-1245
- ISSN
- 1614-6832 (ISSN-L)
- 1614-6840
- OpenAlex
- W1998082424
- Cited by
- 528
- References
- 47
- FWCI
- 32.96
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.