The DOI matches its Crossref record; 54 of the 54 references it cites were found in a registry or an index.
A Comprehensive Approach toward Stable Lithium–Sulfur Batteries with High Volumetric Energy Density
Abstract
A comprehensive approach is reported to construct stable and high volumetric energy density lithium–sulfur batteries, by coupling a multifunctional and hierarchically structured sulfur composite with an in‐situ cross‐linked binder. Through a combination of first‐principles calculations and experimental studies, it is demonstrated that a hybrid sulfur host composed by alternately stacking graphene and layered graphitic carbon nitride embraces high electronic conductivity as well as high polysulfide adsorptivity. It is further shown that the cross‐linked elastomeric binder empowers the hierarchical sulfur composites—multi‐microns in size—with the ability to form crack‐free and compact high‐loading electrodes using traditional slurry processing. Using this approach, electrodes with up to 14.9 mg cm−2 sulfur loading and an extremely low electrolyte/sulfur ratio as low as 3.5: 1 µL mg−1 are obtained. This study sheds light on the essential role of multifaceted cathode design and further on the challenges facing lithium metal anodes in building high volumetric energy density lithium–sulfur batteries.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set
Kresse, G., & Furthmüller, J. (1996) · Physical Review B · doi:10.1103/physrevb.54.11169 · Cited by 123,652
Li-O2 and Li-S batteries with high energy storage
Bruce, P. G., Freunberger, S. A., Hardwick, L. J., & Tarascon, J.-M. (2012) · Nature Materials · doi:10.1038/nmat3191 · Cited by 9,479
A highly ordered nanostructured carbon–sulphur cathode for lithium–sulphur batteries
Ji, X., Lee, K. T., & Nazar, L. F. (2009) · Nature Materials · doi:10.1038/nmat2460 · Cited by 5,988
Self-citationLithium–Sulfur Batteries: Electrochemistry, Materials, and Prospects
Yin, Y., Xin, S., Guo, Y., & Wan, L. (2013) · Angewandte Chemie International Edition · doi:10.1002/anie.201304762 · Cited by 2,707
Challenges Facing Lithium Batteries and Electrical Double‐Layer Capacitors
Choi, N., Chen, Z., Freunberger, S. A., Ji, X., Sun, Y., Amine, K., Yushin, G., Nazar, L. F., Cho, J., & Bruce, P. G. (2012) · Angewandte Chemie International Edition · doi:10.1002/anie.201201429 · Cited by 2,700
Self-citationA new class of Solvent-in-Salt electrolyte for high-energy rechargeable metallic lithium batteries
Suo, L., Hu, Y.-S., Li, H., Armand, M., & Chen, L. (2013) · Nature Communications · doi:10.1038/ncomms2513 · Cited by 2,314
Hydrogen evolution by a metal-free electrocatalyst
Zheng, Y., Jiao, Y., Zhu, Y., Li, L. H., Han, Y., Chen, Y., Du, A., Jaroniec, M., & Qiao, S. Z. (2014) · Nature Communications · doi:10.1038/ncomms4783 · Cited by 2,236
A highly efficient polysulfide mediator for lithium–sulfur batteries
Liang, X., Hart, C., Pang, Q., Garsuch, A., Weiss, T., & Nazar, L. F. (2015) · Nature Communications · doi:10.1038/ncomms6682 · Cited by 2,062
Self-citationNanostructured sulfur cathodes
Yang, Y., Zheng, G., & Cui, Y. (2013) · Chemical Society Reviews · doi:10.1039/c2cs35256g · Cited by 1,947
Porous Hollow Carbon@Sulfur Composites for High‐Power Lithium–Sulfur Batteries
Jayaprakash, N., Shen, J., Moganty, S. S., Corona, A., & Archer, L. A. (2011) · Angewandte Chemie International Edition · doi:10.1002/anie.201100637 · Cited by 1,811
Cited by
Review on High‐Loading and High‐Energy Lithium–Sulfur Batteries
Peng, H., Huang, J., Cheng, X., & Zhang, Q. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700260 · Cited by 1,746
Advances in Lithium–Sulfur Batteries: From Academic Research to Commercial Viability
Chen, Y., Wang, T., Tian, H., Su, D., Zhang, Q., & Wang, G. (2021) · Advanced Materials · doi:10.1002/adma.202003666 · Cited by 870
Lithium–Sulfur Batteries under Lean Electrolyte Conditions: Challenges and Opportunities
Zhao, M., Li, B., Peng, H., Yuan, H., Wei, J., & Huang, J. (2020) · Angewandte Chemie International Edition · doi:10.1002/anie.201909339 · Cited by 663
Current Status and Future Prospects of Metal–Sulfur Batteries
Chung, S., & Manthiram, A. (2019) · Advanced Materials · doi:10.1002/adma.201901125 · Cited by 622
Xue, W., Shi, Z., Suo, L., Wang, C., Wang, Z., Wang, H., So, K. P., Maurano, A., Yu, D., Chen, Y., et al. (2019) · Nature Energy · doi:10.1038/s41560-019-0351-0 · Cited by 591
Lithiated metallic molybdenum disulfide nanosheets for high-performance lithium–sulfur batteries
Li, Z., Sami, I., Yang, J., Li, J., Kumar, R. V., & Chhowalla, M. (2023) · Nature Energy · doi:10.1038/s41560-022-01175-7 · Cited by 569
Host Materials Anchoring Polysulfides in Li–S Batteries Reviewed
Zhou, L., Danilov, D. L., Eichel, R., & Notten, P. H. L. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202001304 · Cited by 516
Chen, T., Zhang, Z., Cheng, B., Chen, R., Hu, Y., Ma, L., Zhu, G., Liu, J., & Jin, Z. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b06973 · Cited by 502
Progress on the Critical Parameters for Lithium–Sulfur Batteries to be Practically Viable
Chung, S., Chang, C., & Manthiram, A. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201801188 · Cited by 477
Carbon nanomaterials for advanced lithium sulfur batteries
Xu, Z.-L., Kim, J.-K., & Kang, K. (2018) · Nano Today · doi:10.1016/j.nantod.2018.02.006 · Cited by 454
A Review of Functional Binders in Lithium–Sulfur Batteries
Yuan, H., Huang, J., Peng, H., Titirici, M., Xiang, R., Chen, R., Liu, Q., & Zhang, Q. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201802107 · Cited by 438
Structural Design of Lithium–Sulfur Batteries: From Fundamental Research to Practical Application
Yang, X., Li, X., Adair, K., Zhang, H., & Sun, X. (2018) · Electrochemical Energy Reviews · doi:10.1007/s41918-018-0010-3 · Cited by 411
Ng, S., Lau, M. Y. L., & Ong, W. (2021) · Advanced Materials · doi:10.1002/adma.202008654 · Cited by 404
Strategies toward High‐Loading Lithium–Sulfur Battery
Hu, Y., Chen, W., Lei, T., Jiao, Y., Huang, J., Hu, A., Gong, C., Yan, C., Wang, X., & Xiong, J. (2020) · Advanced Energy Materials · doi:10.1002/aenm.202000082 · Cited by 402
Yu, L., Chen, S., Lee, H., Zhang, L., Engelhard, M. H., Li, Q., Jiao, S., Liu, J., Xu, W., & Zhang, J.-G. (2018) · ACS Energy Letters · doi:10.1021/acsenergylett.8b00935 · Cited by 363
Li, Z., He, Q., Xu, X., Zhao, Y., Liu, X., Zhou, C., Ai, D., Xia, L., & Mai, L. (2018) · Advanced Materials · doi:10.1002/adma.201804089 · Cited by 338
Three-dimensional ordered porous electrode materials for electrochemical energy storage
Liu, Z., Yuan, X., Zhang, S., Wang, J., Huang, Q., Yu, N., Zhu, Y., Fu, L., Wang, F., Chen, Y., et al. (2019) · NPG Asia Materials · doi:10.1038/s41427-019-0112-3 · Cited by 328
Recent advance in new-generation integrated devices for energy harvesting and storage
Yun, S., Zhang, Y., Xu, Q., Liu, J., & Qin, Y. (2019) · Nano Energy · doi:10.1016/j.nanoen.2019.03.074 · Cited by 263
Metadata
- Authors
- Pang, Q., Liang, X., Kwok, C. Y., Kulisch, J., & Nazar, L. F.
- Venue
- Advanced Energy Materials
- Publisher
- Wiley
- Published
- 2016-11-18
- Volume
- 7
- Issue
- 6
- ISSN
- 1614-6832 (ISSN-L)
- 1614-6840
- OpenAlex
- W2550906466
- Cited by
- 321
- References
- 54
- FWCI
- 21.04
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.