The DOI matches its Crossref record; 54 of the 54 references it cites were found in a registry or an index.
A Comprehensive Approach toward Stable Lithium–Sulfur Batteries with High Volumetric Energy Density
Abstract
A comprehensive approach is reported to construct stable and high volumetric energy density lithium–sulfur batteries, by coupling a multifunctional and hierarchically structured sulfur composite with an in‐situ cross‐linked binder. Through a combination of first‐principles calculations and experimental studies, it is demonstrated that a hybrid sulfur host composed by alternately stacking graphene and layered graphitic carbon nitride embraces high electronic conductivity as well as high polysulfide adsorptivity. It is further shown that the cross‐linked elastomeric binder empowers the hierarchical sulfur composites—multi‐microns in size—with the ability to form crack‐free and compact high‐loading electrodes using traditional slurry processing. Using this approach, electrodes with up to 14.9 mg cm−2 sulfur loading and an extremely low electrolyte/sulfur ratio as low as 3.5: 1 µL mg−1 are obtained. This study sheds light on the essential role of multifaceted cathode design and further on the challenges facing lithium metal anodes in building high volumetric energy density lithium–sulfur batteries.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set
Kresse, G., & Furthmüller, J. (1996) · Physical Review B · doi:10.1103/physrevb.54.11169 · Cited by 123,652
Li-O2 and Li-S batteries with high energy storage
Bruce, P. G., Freunberger, S. A., Hardwick, L. J., & Tarascon, J.-M. (2012) · Nature Materials · doi:10.1038/nmat3191 · Cited by 9,479
A highly ordered nanostructured carbon–sulphur cathode for lithium–sulphur batteries
Ji, X., Lee, K. T., & Nazar, L. F. (2009) · Nature Materials · doi:10.1038/nmat2460 · Cited by 5,988
Self-citationLithium–Sulfur Batteries: Electrochemistry, Materials, and Prospects
Yin, Y., Xin, S., Guo, Y., & Wan, L. (2013) · Angewandte Chemie International Edition · doi:10.1002/anie.201304762 · Cited by 2,707
Challenges Facing Lithium Batteries and Electrical Double‐Layer Capacitors
Choi, N., Chen, Z., Freunberger, S. A., Ji, X., Sun, Y., Amine, K., Yushin, G., Nazar, L. F., Cho, J., & Bruce, P. G. (2012) · Angewandte Chemie International Edition · doi:10.1002/anie.201201429 · Cited by 2,700
Self-citationA new class of Solvent-in-Salt electrolyte for high-energy rechargeable metallic lithium batteries
Suo, L., Hu, Y.-S., Li, H., Armand, M., & Chen, L. (2013) · Nature Communications · doi:10.1038/ncomms2513 · Cited by 2,314
Hydrogen evolution by a metal-free electrocatalyst
Zheng, Y., Jiao, Y., Zhu, Y., Li, L. H., Han, Y., Chen, Y., Du, A., Jaroniec, M., & Qiao, S. Z. (2014) · Nature Communications · doi:10.1038/ncomms4783 · Cited by 2,236
A highly efficient polysulfide mediator for lithium–sulfur batteries
Liang, X., Hart, C., Pang, Q., Garsuch, A., Weiss, T., & Nazar, L. F. (2015) · Nature Communications · doi:10.1038/ncomms6682 · Cited by 2,062
Self-citationNanostructured sulfur cathodes
Yang, Y., Zheng, G., & Cui, Y. (2013) · Chemical Society Reviews · doi:10.1039/c2cs35256g · Cited by 1,947
Porous Hollow Carbon@Sulfur Composites for High‐Power Lithium–Sulfur Batteries
Jayaprakash, N., Shen, J., Moganty, S. S., Corona, A., & Archer, L. A. (2011) · Angewandte Chemie International Edition · doi:10.1002/anie.201100637 · Cited by 1,811
Smaller Sulfur Molecules Promise Better Lithium–Sulfur Batteries
Xin, S., Gu, L., Zhao, N.-H., Yin, Y.-X., Zhou, L.-J., Guo, Y.-G., & Wan, L.-J. (2012) · Journal of the American Chemical Society · doi:10.1021/ja308170k · Cited by 1,644
Graphene Oxide as a Sulfur Immobilizer in High Performance Lithium/Sulfur Cells
Ji, L., Rao, M., Zheng, H., Zhang, L., Li, Y., Duan, W., Guo, J., Cairns, E. J., & Zhang, Y. (2011) · Journal of the American Chemical Society · doi:10.1021/ja206955k · Cited by 1,505
Powering Lithium–Sulfur Battery Performance by Propelling Polysulfide Redox at Sulfiphilic Hosts
Yuan, Z., Peng, H.-J., Hou, T.-Z., Huang, J.-Q., Chen, C.-M., Wang, D.-W., Cheng, X.-B., Wei, F., & Zhang, Q. (2016) · Nano Letters · doi:10.1021/acs.nanolett.5b04166 · Cited by 1,438
New Approaches for High Energy Density Lithium–Sulfur Battery Cathodes
Evers, S., & Nazar, L. F. (2013) · Accounts of Chemical Research · doi:10.1021/ar3001348 · Cited by 1,324
Self-citationPang, Q., Kundu, D., Cuisinier, M., & Nazar, L. F. (2014) · Nature Communications · doi:10.1038/ncomms5759 · Cited by 1,318
Self-citationSulfur Cathodes Based on Conductive MXene Nanosheets for High‐Performance Lithium–Sulfur Batteries
Liang, X., Garsuch, A., & Nazar, L. F. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201410174 · Cited by 1,201
Self-citationLithium-coated polymeric matrix as a minimum volume-change and dendrite-free lithium metal anode
Liu, Y., Lin, D., Liang, Z., Zhao, J., Yan, K., & Cui, Y. (2016) · Nature Communications · doi:10.1038/ncomms10992 · Cited by 902
Elazari, R., Salitra, G., Garsuch, A., Panchenko, A., & Aurbach, D. (2011) · Advanced Materials · doi:10.1002/adma.201103274 · Cited by 895
Pang, Q., Tang, J., Huang, H., Liang, X., Hart, C., Tam, K. C., & Nazar, L. F. (2015) · Advanced Materials · doi:10.1002/adma.201502467 · Cited by 780
Self-citationSong, J., Gordin, M. L., Xu, T., Chen, S., Yu, Z., Sohn, H., Lu, J., Ren, Y., Duan, Y., & Wang, D. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201411109 · Cited by 776
Zheng, J., Tian, J., Wu, D., Gu, M., Xu, W., Wang, C., Gao, F., Engelhard, M. H., Zhang, J.-G., Liu, J., et al. (2014) · Nano Letters · doi:10.1021/nl404721h · Cited by 719
Zheng, G., Zhang, Q., Cha, J. J., Yang, Y., Li, W., Seh, Z. W., & Cui, Y. (2013) · Nano Letters · doi:10.1021/nl304795g · Cited by 705
Tao, X., Wang, J., Ying, Z., Cai, Q., Zheng, G., Gan, Y., Huang, H., Xia, Y., Liang, C., Zhang, W., et al. (2014) · Nano Letters · doi:10.1021/nl502331f · Cited by 687
Du, A., Sanvito, S., Li, Z., Wang, D., Jiao, Y., Liao, T., Sun, Q., Ng, Y. H., Zhu, Z., Amal, R., et al. (2012) · Journal of the American Chemical Society · doi:10.1021/ja211637p · Cited by 631
Metal–Sulfur Battery Cathodes Based on PAN–Sulfur Composites
Wei, S., Ma, L., Hendrickson, K. E., Tu, Z., & Archer, L. A. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b08113 · Cited by 579
A graphene foam electrode with high sulfur loading for flexible and high energy Li-S batteries
Zhou, G., Li, L., Ma, C., Wang, S., Shi, Y., Koratkar, N., Ren, W., Li, F., & Cheng, H.-M. (2015) · Nano Energy · doi:10.1016/j.nanoen.2014.11.025 · Cited by 570
Song, J., Yu, Z., Gordin, M. L., & Wang, D. (2016) · Nano Letters · doi:10.1021/acs.nanolett.5b03217 · Cited by 561
High Energy Density Lithium–Sulfur Batteries: Challenges of Thick Sulfur Cathodes
Lv, D., Zheng, J., Li, Q., Xie, X., Ferrara, S., Nie, Z., Mehdi, L. B., Browning, N. D., Zhang, J., Graff, G. L., et al. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201402290 · Cited by 554
3D Interconnected Electrode Materials with Ultrahigh Areal Sulfur Loading for Li–S Batteries
Fang, R., Zhao, S., Hou, P., Cheng, M., Wang, S., Cheng, H., Liu, C., & Li, F. (2016) · Advanced Materials · doi:10.1002/adma.201506014 · Cited by 532
Anodes for Rechargeable Lithium‐Sulfur Batteries
Cao, R., Xu, W., Lv, D., Xiao, J., & Zhang, J. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201402273 · Cited by 502
Structural Design of Cathodes for Li‐S Batteries
Pope, M. A., & Aksay, I. A. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500124 · Cited by 500
Li, Z., Yuan, L., Yi, Z., Sun, Y., Liu, Y., Jiang, Y., Shen, Y., Xin, Y., Zhang, Z., & Huang, Y. (2014) · Advanced Energy Materials · doi:10.1002/aenm.201301473 · Cited by 481
Li, Z., Huang, Y., Yuan, L., Hao, Z., & Huang, Y. (2015) · Carbon · doi:10.1016/j.carbon.2015.03.008 · Cited by 429
A graphene-like metallic cathode host for long-life and high-loading lithium–sulfur batteries
Pang, Q., Kundu, D., & Nazar, L. F. (2016) · Materials Horizons · doi:10.1039/c5mh00246j · Cited by 424
Self-citationCarbon Materials for Lithium Sulfur Batteries—Ten Critical Questions
Borchardt, L., Oschatz, M., & Kaskel, S. (2016) · Chemistry – A European Journal · doi:10.1002/chem.201600040 · Cited by 414
Pang, Q., & Nazar, L. F. (2016) · ACS Nano · doi:10.1021/acsnano.5b07347 · Cited by 411
Self-citationProgress Towards Commercially Viable Li–S Battery Cells
Urbonaite, S., Poux, T., & Novák, P. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500118 · Cited by 406
A Graphene-like Oxygenated Carbon Nitride Material for Improved Cycle-Life Lithium/Sulfur Batteries
Liu, J., Li, W., Duan, L., Li, X., Ji, L., Geng, Z., Huang, K., Lu, L., Zhou, L., Liu, Z., et al. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b01919 · Cited by 401
Yao, H., Zheng, G., Hsu, P.-C., Kong, D., Cha, J. J., Li, W., Seh, Z. W., McDowell, M. T., Yan, K., Liang, Z., et al. (2014) · Nature Communications · doi:10.1038/ncomms4943 · Cited by 398
Peng, H., Hou, T., Zhang, Q., Huang, J., Cheng, X., Guo, M., Yuan, Z., He, L., & Wei, F. (2014) · Advanced Materials Interfaces · doi:10.1002/admi.201400227 · Cited by 393
Unique behaviour of nonsolvents for polysulphides in lithium–sulphur batteries
Cuisinier, M., Cabelguen, P.-E., Adams, B. D., Garsuch, A., Balasubramanian, M., & Nazar, L. F. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee00372a · Cited by 393
Self-citationStrubel, P., Thieme, S., Biemelt, T., Helmer, A., Oschatz, M., Brückner, J., Althues, H., & Kaskel, S. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201402768 · Cited by 352
Li, Z., Yuan, L., Yi, Z., et al. (2013) · ECS Meeting Abstracts · doi:10.1149/ma2013-02/2/42 · Cited by 322
Qie, L., Zu, C., & Manthiram, A. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201502459 · Cited by 321
Lee, J. T., Zhao, Y., Thieme, S., Kim, H., Oschatz, M., Borchardt, L., Magasinski, A., Cho, W., Kaskel, S., & Yushin, G. (2013) · Advanced Materials · doi:10.1002/adma.201301579 · Cited by 315
A Facile Layer‐by‐Layer Approach for High‐Areal‐Capacity Sulfur Cathodes
Qie, L., & Manthiram, A. (2015) · Advanced Materials · doi:10.1002/adma.201405689 · Cited by 290
Three-Dimensional Growth of Li2S in Lithium–Sulfur Batteries Promoted by a Redox Mediator
Gerber, L. C. H., Frischmann, P. D., Fan, F. Y., Doris, S. E., Qu, X., Scheuermann, A. M., Persson, K., Chiang, Y.-M., & Helms, B. A. (2016) · Nano Letters · doi:10.1021/acs.nanolett.5b04189 · Cited by 255
Kim, H., Wu, F., Lee, J. T., Nitta, N., Lin, H., Oschatz, M., Cho, W. I., Kaskel, S., Borodin, O., & Yushin, G. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201401792 · Cited by 240
Eroglu, D., Zavadil, K. R., & Gallagher, K. G. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0611506jes · Cited by 224
Elazari, R., Salitra, G., Talyosef, Y., et al. (2010) · Journal of The Electrochemical Society · doi:10.1149/1.3479828 · Cited by 177
In Situ Sulfur Reduction and Intercalation of Graphite Oxides for Li‐S Battery Cathodes
Zheng, S., Yang, W. L., Zhu, Y., et al. (2014) · Advanced Energy Materials · doi:10.1002/aenm.201400482 · Cited by 141
Systematic Effect for an Ultralong Cycle Lithium–Sulfur Battery
Wu, F., Ye, Y., Chen, R., Qian, J., Zhao, T., Li, L., & Li, W. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b02864 · Cited by 116
Ma, J., Fang, Z., Yan, Y. G., Yang, Z., Gu, L., Hu, Y., Li, H., Wang, Z., & Huang, X. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500046 · Cited by 104
Sun, Q., Fang, X., Weng, W., Deng, J., Chen, P., Ren, J., Guan, G., Wang, M., & Peng, H. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201504514 · Cited by 95
Cited by
Review on High‐Loading and High‐Energy Lithium–Sulfur Batteries
Peng, H., Huang, J., Cheng, X., & Zhang, Q. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700260 · Cited by 1,746
Advances in Lithium–Sulfur Batteries: From Academic Research to Commercial Viability
Chen, Y., Wang, T., Tian, H., Su, D., Zhang, Q., & Wang, G. (2021) · Advanced Materials · doi:10.1002/adma.202003666 · Cited by 870
Lithium–Sulfur Batteries under Lean Electrolyte Conditions: Challenges and Opportunities
Zhao, M., Li, B., Peng, H., Yuan, H., Wei, J., & Huang, J. (2020) · Angewandte Chemie International Edition · doi:10.1002/anie.201909339 · Cited by 663
Current Status and Future Prospects of Metal–Sulfur Batteries
Chung, S., & Manthiram, A. (2019) · Advanced Materials · doi:10.1002/adma.201901125 · Cited by 622
Xue, W., Shi, Z., Suo, L., Wang, C., Wang, Z., Wang, H., So, K. P., Maurano, A., Yu, D., Chen, Y., et al. (2019) · Nature Energy · doi:10.1038/s41560-019-0351-0 · Cited by 591
Metadata
- Authors
- Pang, Q., Liang, X., Kwok, C. Y., Kulisch, J., & Nazar, L. F.
- Venue
- Advanced Energy Materials
- Publisher
- Wiley
- Published
- 2016-11-18
- Volume
- 7
- Issue
- 6
- ISSN
- 1614-6832 (ISSN-L)
- 1614-6840
- OpenAlex
- W2550906466
- Cited by
- 321
- References
- 54
- FWCI
- 21.04
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.