The DOI matches its Crossref record; 35 of the 35 references it cites were found in a registry or an index.
Accurate Determination of Coulombic Efficiency for Lithium Metal Anodes and Lithium Metal Batteries
Abstract
Lithium (Li) metal is an ideal anode material for high energy density batteries. However, the low Coulombic efficiency (CE) and the formation of dendrites during repeated plating and stripping processes have hindered its applications in rechargeable Li metal batteries. The accurate measurement of Li CE is a critical factor to predict the cycle life of Li metal batteries, but the measurement of Li CE is affected by various factors that often lead to conflicting values reported in the literature. Here, several parameters that affect the measurement of Li CE are investigated and a more accurate method of determining Li CE is proposed. It is also found that the capacity used for cycling greatly affects the stabilization cycles and the average CE. A higher cycling capacity leads to faster stabilization of Li anode and a higher average CE. With a proper operating protocol, the average Li CE can be increased from 99.0% to 99.5% at a high capacity of 6 mA h cm−2 (which is suitable for practical applications) when a high‐concentration ether‐based electrolyte is used.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Nonaqueous Liquid Electrolytes for Lithium-Based Rechargeable Batteries
Xu, K. (2004) · Chemical Reviews · doi:10.1021/cr030203g · Cited by 7,437
Reviving the lithium metal anode for high-energy batteries
Lin, D., Liu, Y., & Cui, Y. (2017) · Nature Nanotechnology · doi:10.1038/nnano.2017.16 · Cited by 6,763
Electrolytes and Interphases in Li-Ion Batteries and Beyond
Xu, K. (2014) · Chemical Reviews · doi:10.1021/cr500003w · Cited by 5,566
Peled, E. (1979) · Journal of The Electrochemical Society · doi:10.1149/1.2128859 · Cited by 2,899
High rate and stable cycling of lithium metal anode
Qian, J., Henderson, W. A., Xu, W., Bhattacharya, P., Engelhard, M., Borodin, O., & Zhang, J.-G. (2015) · Nature Communications · doi:10.1038/ncomms7362 · Cited by 2,561
Self-citationSelective deposition and stable encapsulation of lithium through heterogeneous seeded growth
Yan, K., Lu, Z., Lee, H.-W., Xiong, F., Hsu, P.-C., Li, Y., Zhao, J., Chu, S., & Cui, Y. (2016) · Nature Energy · doi:10.1038/nenergy.2016.10 · Cited by 2,116
Dendrite-Free Lithium Deposition via Self-Healing Electrostatic Shield Mechanism
Ding, F., Xu, W., Graff, G. L., Zhang, J., Sushko, M. L., Chen, X., Shao, Y., Engelhard, M. H., Nie, Z., Xiao, J., et al. (2013) · Journal of the American Chemical Society · doi:10.1021/ja312241y · Cited by 2,107
Self-citationLin, D., Liu, Y., Liang, Z., Lee, H.-W., Sun, J., Wang, H., Yan, K., Xie, J., & Cui, Y. (2016) · Nature Nanotechnology · doi:10.1038/nnano.2016.32 · Cited by 1,798
A Review of Solid Electrolyte Interphases on Lithium Metal Anode
Cheng, X., Zhang, R., Zhao, C., Wei, F., Zhang, J., & Zhang, Q. (2016) · Advanced Science · doi:10.1002/advs.201500213 · Cited by 1,786
Self-citationFluoroethylene Carbonate Additives to Render Uniform Li Deposits in Lithium Metal Batteries
Zhang, X., Cheng, X., Chen, X., Yan, C., & Zhang, Q. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201605989 · Cited by 1,699
Aurbach, D. (2002) · Solid State Ionics · doi:10.1016/s0167-2738(02)00080-2 · Cited by 1,697
Stable lithium electrodeposition in liquid and nanoporous solid electrolytes
Lu, Y., Tu, Z., & Archer, L. A. (2014) · Nature Materials · doi:10.1038/nmat4041 · Cited by 1,592
An Artificial Solid Electrolyte Interphase Layer for Stable Lithium Metal Anodes
Li, N., Yin, Y., Yang, C., & Guo, Y. (2016) · Advanced Materials · doi:10.1002/adma.201504526 · Cited by 1,577
Electrolyte additive enabled fast charging and stable cycling lithium metal batteries
Zheng, J., Engelhard, M. H., Mei, D., Jiao, S., Polzin, B. J., Zhang, J.-G., & Xu, W. (2017) · Nature Energy · doi:10.1038/nenergy.2017.12 · Cited by 1,343
Self-citationAdvanced Model for Solid Electrolyte Interphase Electrodes in Liquid and Polymer Electrolytes
Peled, E., Golodnitsky, D., & Ardel, G. (1997) · Journal of The Electrochemical Society · doi:10.1149/1.1837858 · Cited by 1,205
History, Evolution, and Future Status of Energy Storage
Whittingham, M. S. (2012) · Proceedings of the IEEE · doi:10.1109/jproc.2012.2190170 · Cited by 873
Anode‐Free Rechargeable Lithium Metal Batteries
Qian, J., Adams, B. D., Zheng, J., Xu, W., Henderson, W. A., Wang, J., Bowden, M. E., Xu, S., Hu, J., & Zhang, J. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201602353 · Cited by 746
Self-citationIdentification of Surface Films Formed on Lithium in Propylene Carbonate Solutions
Aurbach, D., Daroux, M. L., Faguy, P. W., & Yeager, E. (1987) · Journal of The Electrochemical Society · doi:10.1149/1.2100722 · Cited by 612
Zhu, B., Jin, Y., Hu, X., Zheng, Q., Zhang, S., Wang, Q., & Zhu, J. (2017) · Advanced Materials · doi:10.1002/adma.201603755 · Cited by 587
Lithium Metal Anodes with an Adaptive “Solid-Liquid” Interfacial Protective Layer
Liu, K., Pei, A., Lee, H. R., Kong, B., Liu, N., Lin, D., Liu, Y., Liu, C., Hsu, P.-C., Bao, Z., et al. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.6b13314 · Cited by 560
Stabilizing Lithium Metal Anodes by Uniform Li-Ion Flux Distribution in Nanochannel Confinement
Liu, W., Lin, D., Pei, A., & Cui, Y. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b08730 · Cited by 455
A lithium anode protection guided highly-stable lithium–sulfur battery
Ma, G., Wen, Z., Wu, M., Shen, C., Wang, Q., Jin, J., & Wu, X. (2014) · Chem. Commun. · doi:10.1039/c4cc05535g · Cited by 382
Smith, A. J., Burns, J. C., Trussler, S., & Dahn, J. R. (2010) · Journal of The Electrochemical Society · doi:10.1149/1.3268129 · Cited by 369
Miao, R., Yang, J., Feng, X., Jia, H., Wang, J., & Nuli, Y. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.08.011 · Cited by 361
Ionic‐Liquid–Nanoparticle Hybrid Electrolytes: Applications in Lithium Metal Batteries
Lu, Y., Korf, K., Kambe, Y., Tu, Z., & Archer, L. A. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201307137 · Cited by 348
The Surface Chemistry of Lithium Electrodes in Alkyl Carbonate Solutions
Aurbach, D., Ein‐Ely, Y., & Zaban, A. (1994) · Journal of The Electrochemical Society · doi:10.1149/1.2054718 · Cited by 344
Dendrite-free Li deposition using trace-amounts of water as an electrolyte additive
Qian, J., Xu, W., Bhattacharya, P., Engelhard, M., Henderson, W. A., Zhang, Y., & Zhang, J.-G. (2015) · Nano Energy · doi:10.1016/j.nanoen.2015.04.009 · Cited by 339
Self-citationDing, F., Xu, W., Chen, X., Zhang, J., Engelhard, M. H., Zhang, Y., Johnson, B. R., Crum, J. V., Blake, T. A., Liu, X., et al. (2013) · Journal of The Electrochemical Society · doi:10.1149/2.100310jes · Cited by 334
Self-citationInterpreting High Precision Coulometry Results on Li-ion Cells
Smith, A. J., Burns, J. C., Xiong, D., & Dahn, J. R. (2011) · Journal of The Electrochemical Society · doi:10.1149/1.3625232 · Cited by 308
The Application of Atomic Force Microscopy for the Study of Li Deposition Processes
Aurbach, D., & Cohen, Y. (1996) · Journal of The Electrochemical Society · doi:10.1149/1.1837248 · Cited by 192
von Sacken, U., Nodwell, E., Sundher, A., & Dahn, J. R. (1995) · Journal of Power Sources · doi:10.1016/0378-7753(94)02076-f · Cited by 143
Lithium Metal Anodes and Rechargeable Lithium Metal Batteries
Zhang, J.-G., Xu, W., & Henderson, W. A. (2017) · Springer Series in Materials Science · doi:10.1007/978-3-319-44054-5 · Cited by 119
Self-citationAurbach, D., & Granot, E. (1997) · Electrochimica Acta · doi:10.1016/s0013-4686(96)00231-9 · Cited by 111
Song, J., Lee, H., Choo, M., Park, J.-K., & Kim, H. (2015) · Scientific Reports · doi:10.1038/srep14458 · Cited by 103
Electrochemical formation of lithium-aluminium alloys in propylene carbonate electrolytes
Frazer, E. J. (1981) · Journal of Electroanalytical Chemistry · doi:10.1016/s0022-0728(81)80588-8 · Cited by 25
Cited by
Pathways for practical high-energy long-cycling lithium metal batteries
Liu, J., Bao, Z., Cui, Y., Dufek, E. J., Goodenough, J. B., Khalifah, P., Li, Q., Liaw, B. Y., Liu, P., Manthiram, A., et al. (2019) · Nature Energy · doi:10.1038/s41560-019-0338-x · Cited by 3,412
Self-citationCurrent status and future directions of multivalent metal-ion batteries
Liang, Y., Dong, H., Aurbach, D., & Yao, Y. (2020) · Nature Energy · doi:10.1038/s41560-020-0655-0 · Cited by 1,521
Quantifying inactive lithium in lithium metal batteries
Fang, C., Li, J., Zhang, M., Zhang, Y., Yang, F., Lee, J. Z., Lee, M.-H., Alvarado, J., Schroeder, M. A., Yang, Y., et al. (2019) · Nature · doi:10.1038/s41586-019-1481-z · Cited by 1,413
High‐Voltage Lithium‐Metal Batteries Enabled by Localized High‐Concentration Electrolytes
Chen, S., Zheng, J., Mei, D., Han, K. S., Engelhard, M. H., Zhao, W., Xu, W., Liu, J., & Zhang, J. (2018) · Advanced Materials · doi:10.1002/adma.201706102 · Cited by 1,328
Self-citationYu, Z., Wang, H., Kong, X., Huang, W., Tsao, Y., Mackanic, D. G., Wang, K., Wang, X., Huang, W., Choudhury, S., et al. (2020) · Nature Energy · doi:10.1038/s41560-020-0634-5 · Cited by 1,228
Metadata
- Authors
- Adams, B. D., Zheng, J., Ren, X., Xu, W., & Zhang, J.
- Venue
- Advanced Energy Materials
- Publisher
- Wiley
- Published
- 2017-10-11
- Volume
- 8
- Issue
- 7
- ISSN
- 1614-6832 (ISSN-L)
- 1614-6840
- OpenAlex
- W2763902109
- Cited by
- 1,499
- References
- 35
- FWCI
- 20.14
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.