The DOI matches its Crossref record; 175 of the 175 references it cites were found in a registry or an index.
Morphology Control in Organic Solar Cells
Abstract
Organic solar cells (OSCs) can directly convert the sunlight into electrical energy and present some advantages, such as low cost, light weight, flexibility, semitransparency, and roll‐to‐roll large‐area fabrication. Due to the short diffusion length of exciton (≈10 nm) in organic semiconductor materials, the ideal nanoscale phase separation in the active layer is one of the crucial factors for achieving efficient exciton dissociation and charge transport. The morphology of the active layer is mainly determined by the nature of donors and acceptors (e.g., solubility, crystallinity, and miscibility), the film processing, the device configuration, and so on. In general, it is very hard to obtain ideal morphology in the as‐cast films. Therefore, it is usually essential to take measures to achieve the active layer with good molecular stacking, proper domain size, high domain purity, and suitable vertical phase separation. In this review, recent developments in morphology control and morphology characterization are summarized and analyzed. This review might help the community to decipher active layer morphology at multiple length scales and to achieve ideal morphology toward high‐performance OSCs.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Li, G., Shrotriya, V., Huang, J., Yao, Y., Moriarty, T., Emery, K., & Yang, Y. (2005) · Nature Materials · doi:10.1038/nmat1500 · Cited by 5,535
Ma, W., Yang, C., Gong, X., Lee, K., & Heeger, A. J. (2005) · Advanced Functional Materials · doi:10.1002/adfm.200500211 · Cited by 4,565
Li, G., Zhu, R., & Yang, Y. (2012) · Nature Photonics · doi:10.1038/nphoton.2012.11 · Cited by 4,414
Polymer–Fullerene Composite Solar Cells
Thompson, B. C., & Fréchet, J. M. J. (2008) · Angewandte Chemie International Edition · doi:10.1002/anie.200702506 · Cited by 4,150
Bulk heterojunction solar cells with internal quantum efficiency approaching 100%
Park, S. H., Roy, A., Beaupré, S., Cho, S., Coates, N., Moon, J. S., Moses, D., Leclerc, M., Lee, K., & Heeger, A. J. (2009) · Nature Photonics · doi:10.1038/nphoton.2009.69 · Cited by 4,073
Synthesis of Conjugated Polymers for Organic Solar Cell Applications
Cheng, Y.-J., Yang, S.-H., & Hsu, C.-S. (2009) · Chemical Reviews · doi:10.1021/cr900182s · Cited by 3,972
Efficiency enhancement in low-bandgap polymer solar cells by processing with alkane dithiols
Peet, J., Kim, J. Y., Coates, N. E., Ma, W. L., Moses, D., Heeger, A. J., & Bazan, G. C. (2007) · Nature Materials · doi:10.1038/nmat1928 · Cited by 3,202
Aggregation and morphology control enables multiple cases of high-efficiency polymer solar cells
Liu, Y., Zhao, J., Li, Z., Mu, C., Ma, W., Hu, H., Jiang, K., Lin, H., Ade, H., & Yan, H. (2014) · Nature Communications · doi:10.1038/ncomms6293 · Cited by 3,106
Molecular Optimization Enables over 13% Efficiency in Organic Solar Cells
Zhao, W., Li, S., Yao, H., Zhang, S., Zhang, Y., Yang, B., & Hou, J. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b02677 · Cited by 2,790
2.5% efficient organic plastic solar cells
Shaheen, S. E., Brabec, C. J., Sariciftci, N. S., Padinger, F., Fromherz, T., & Hummelen, J. C. (2001) · Applied Physics Letters · doi:10.1063/1.1345834 · Cited by 2,613
Recent Advances in Bulk Heterojunction Polymer Solar Cells
Lu, L., Zheng, T., Wu, Q., Schneider, A. M., Zhao, D., & Yu, L. (2015) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00098 · Cited by 2,550
Efficient organic solar cells processed from hydrocarbon solvents
Zhao, J., Li, Y., Yang, G., Jiang, K., Lin, H., Ade, H., Ma, W., & Yan, H. (2016) · Nature Energy · doi:10.1038/nenergy.2015.27 · Cited by 2,367
Kim, Y., Cook, S., Tuladhar, S. M., Choulis, S. A., Nelson, J., Durrant, J. R., Bradley, D. D. C., Giles, M., McCulloch, I., Ha, C.-S., et al. (2006) · Nature Materials · doi:10.1038/nmat1574 · Cited by 2,312
Small molecule semiconductors for high-efficiency organic photovoltaics
Lin, Y., Li, Y., & Zhan, X. (2012) · Chemical Society Reviews · doi:10.1039/c2cs15313k · Cited by 1,751
Self-citationPedersen, J. S. (1997) · Advances in Colloid and Interface Science · doi:10.1016/s0001-8686(97)00312-6 · Cited by 1,653
Processing Additives for Improved Efficiency from Bulk Heterojunction Solar Cells
Lee, J. K., Ma, W. L., Brabec, C. J., Yuen, J., Moon, J. S., Kim, J. Y., Lee, K., Bazan, G. C., & Heeger, A. J. (2008) · Journal of the American Chemical Society · doi:10.1021/ja710079w · Cited by 1,613
Nanoscale Morphology of High-Performance Polymer Solar Cells
Yang, X., Loos, J., Veenstra, S. C., Verhees, W. J. H., Wienk, M. M., Kroon, J. M., Michels, M. A. J., & Janssen, R. A. J. (2005) · Nano Letters · doi:10.1021/nl048120i · Cited by 1,543
Price, S. C., Stuart, A. C., Yang, L., Zhou, H., & You, W. (2011) · Journal of the American Chemical Society · doi:10.1021/ja1112595 · Cited by 1,505
Scattering by an Inhomogeneous Solid. II. The Correlation Function and Its Application
Debye, P., Anderson, H. R., & Brumberger, H. (1957) · Journal of Applied Physics · doi:10.1063/1.1722830 · Cited by 1,451
Zhou, H., Yang, L., Stuart, A. C., Price, S. C., Liu, S., & You, W. (2011) · Angewandte Chemie International Edition · doi:10.1002/anie.201005451 · Cited by 1,210
Li, G., Yao, Y., Yang, H., Shrotriya, V., Yang, G., & Yang, Y. (2007) · Advanced Functional Materials · doi:10.1002/adfm.200600624 · Cited by 1,147
Imide- and Amide-Functionalized Polymer Semiconductors
Guo, X., Facchetti, A., & Marks, T. J. (2014) · Chemical Reviews · doi:10.1021/cr500225d · Cited by 1,035
Bin, H., Gao, L., Zhang, Z.-G., Yang, Y., Zhang, Y., Zhang, C., Chen, S., Xue, L., Yang, C., Xiao, M., et al. (2016) · Nature Communications · doi:10.1038/ncomms13651 · Cited by 987
High-Performance Electron Acceptor with Thienyl Side Chains for Organic Photovoltaics
Lin, Y., Zhao, F., He, Q., Huo, L., Wu, Y., Parker, T. C., Ma, W., Sun, Y., Wang, C., Zhu, D., et al. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b02004 · Cited by 980
Self-citationA Facile Planar Fused-Ring Electron Acceptor for As-Cast Polymer Solar Cells with 8.71% Efficiency
Lin, Y., He, Q., Zhao, F., Huo, L., Mai, J., Lu, X., Su, C.-J., Li, T., Wang, J., Zhu, J., et al. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b00853 · Cited by 945
Self-citationFullerene derivative acceptors for high performance polymer solar cells
He, Y., & Li, Y. (2011) · Phys. Chem. Chem. Phys. · doi:10.1039/c0cp01178a · Cited by 941
Walker, B., Tamayo, A. B., Dang, X., Zalar, P., Seo, J. H., Garcia, A., Tantiwiwat, M., & Nguyen, T. (2009) · Advanced Functional Materials · doi:10.1002/adfm.200900832 · Cited by 906
Yang, Y., Zhang, Z.-G., Bin, H., Chen, S., Gao, L., Xue, L., Yang, C., & Li, Y. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b09110 · Cited by 876
Fused Nonacyclic Electron Acceptors for Efficient Polymer Solar Cells
Dai, S., Zhao, F., Zhang, Q., Lau, T.-K., Li, T., Liu, K., Ling, Q., Wang, C., Lu, X., You, W., et al. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.6b12755 · Cited by 864
Self-citationErb, T., Zhokhavets, U., Gobsch, G., Raleva, S., Stühn, B., Schilinsky, P., Waldauf, C., & Brabec, C. J. (2005) · Advanced Functional Materials · doi:10.1002/adfm.200400521 · Cited by 831
Halls, J. J. M., Pichler, K., Friend, R. H., Moratti, S. C., & Holmes, A. B. (1996) · Applied Physics Letters · doi:10.1063/1.115797 · Cited by 800
25th Anniversary Article: Rise to Power – OPV‐Based Solar Parks
Krebs, F. C., Espinosa, N., Hösel, M., Søndergaard, R. R., & Jørgensen, M. (2014) · Advanced Materials · doi:10.1002/adma.201302031 · Cited by 793
Bin, H., Zhang, Z.-G., Gao, L., Chen, S., Zhong, L., Xue, L., Yang, C., & Li, Y. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b01744 · Cited by 783
Non-fullerene acceptors for organic photovoltaics: an emerging horizon
Lin, Y., & Zhan, X. (2014) · Materials Horizons · doi:10.1039/c4mh00042k · Cited by 745
Self-citationInfluence of nanomorphology on the photovoltaic action of polymer–fullerene composites
Chirvase, D., Parisi, J., Hummelen, J. C., & Dyakonov, V (2004) · Nanotechnology · doi:10.1088/0957-4484/15/9/035 · Cited by 723
Meng, D., Sun, D., Zhong, C., Liu, T., Fan, B., Huo, L., Li, Y., Jiang, W., Choi, H., Kim, T., et al. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.5b11149 · Cited by 706
Single‐Junction Binary‐Blend Nonfullerene Polymer Solar Cells with 12.1% Efficiency
Zhao, F., Dai, S., Wu, Y., Zhang, Q., Wang, J., Jiang, L., Ling, Q., Wei, Z., Ma, W., You, W., et al. (2017) · Advanced Materials · doi:10.1002/adma.201700144 · Cited by 699
Self-citationTernary organic solar cells offer 14% power conversion efficiency
Xiao, Z., Jia, X., & Ding, L. (2017) · Science Bulletin · doi:10.1016/j.scib.2017.11.003 · Cited by 696
Wienk, M. M., Turbiez, M., Gilot, J., & Janssen, R. A. J. (2008) · Advanced Materials · doi:10.1002/adma.200800456 · Cited by 695
Xu, Z., Chen, L., Yang, G., Huang, C., Hou, J., Wu, Y., Li, G., Hsu, C., & Yang, Y. (2009) · Advanced Functional Materials · doi:10.1002/adfm.200801286 · Cited by 681
Effects of Solvent Mixtures on the Nanoscale Phase Separation in Polymer Solar Cells
Yao, Y., Hou, J., Xu, Z., Li, G., & Yang, Y. (2008) · Advanced Functional Materials · doi:10.1002/adfm.200701459 · Cited by 671
Collins, B. A., Li, Z., Tumbleston, J. R., Gann, E., McNeill, C. R., & Ade, H. (2013) · Advanced Energy Materials · doi:10.1002/aenm.201200377 · Cited by 649
A molecular nematic liquid crystalline material for high-performance organic photovoltaics
Sun, K., Xiao, Z., Lu, S., Zajaczkowski, W., Pisula, W., Hanssen, E., White, J. M., Williamson, R. M., Subbiah, J., Ouyang, J., et al. (2015) · Nature Communications · doi:10.1038/ncomms7013 · Cited by 630
Oligomer Molecules for Efficient Organic Photovoltaics
Lin, Y., & Zhan, X. (2016) · Accounts of Chemical Research · doi:10.1021/acs.accounts.5b00363 · Cited by 601
Self-citationEffects of Thermal Annealing Upon the Morphology of Polymer–Fullerene Blends
Verploegen, E., Mondal, R., Bettinger, C. J., Sok, S., Toney, M. F., & Bao, Z. (2010) · Advanced Functional Materials · doi:10.1002/adfm.201000975 · Cited by 595
Zhou, J., Wan, X., Liu, Y., Zuo, Y., Li, Z., He, G., Long, G., Ni, W., Li, C., Su, X., et al. (2012) · Journal of the American Chemical Society · doi:10.1021/ja306865z · Cited by 583
Influence of blend microstructure on bulk heterojunction organic photovoltaic performance
Brabec, C. J., Heeney, M., McCulloch, I., & Nelson, J. (2011) · Chem. Soc. Rev. · doi:10.1039/c0cs00045k · Cited by 568
Status and prospects for ternary organic photovoltaics
Lu, L., Kelly, M. A., You, W., & Yu, L. (2015) · Nature Photonics · doi:10.1038/nphoton.2015.128 · Cited by 556
Lou, S. J., Szarko, J. M., Xu, T., Yu, L., Marks, T. J., & Chen, L. X. (2011) · Journal of the American Chemical Society · doi:10.1021/ja2085564 · Cited by 539
Additives for morphology control in high-efficiency organic solar cells
Liao, H.-C., Ho, C.-C., Chang, C.-Y., Jao, M.-H., Darling, S. B., & Su, W.-F. (2013) · Materials Today · doi:10.1016/j.mattod.2013.08.013 · Cited by 535
Conjugated Polymer–Small Molecule Alloy Leads to High Efficient Ternary Organic Solar Cells
Zhang, J., Zhang, Y., Fang, J., Lu, K., Wang, Z., Ma, W., & Wei, Z. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b03449 · Cited by 530
High-performance multiple-donor bulk heterojunction solar cells
Yang, Y. (., Chen, W., Dou, L., Chang, W.-H., Duan, H.-S., Bob, B., Li, G., & Yang, Y. (2015) · Nature Photonics · doi:10.1038/nphoton.2015.9 · Cited by 527
Single‐Junction Organic Solar Cells Based on a Novel Wide‐Bandgap Polymer with Efficiency of 9.7%
Huo, L., Liu, T., Sun, X., Cai, Y., Heeger, A. J., & Sun, Y. (2015) · Advanced Materials · doi:10.1002/adma.201500647 · Cited by 522
Three-Bladed Rylene Propellers with Three-Dimensional Network Assembly for Organic Electronics
Meng, D., Fu, H., Xiao, C., Meng, X., Winands, T., Ma, W., Wei, W., Fan, B., Huo, L., Doltsinis, N. L., et al. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b04368 · Cited by 493
High‐Efficiency Polymer Solar Cells Enhanced by Solvent Treatment
Zhou, H., Zhang, Y., Seifter, J., Collins, S. D., Luo, C., Bazan, G. C., Nguyen, T., & Heeger, A. J. (2013) · Advanced Materials · doi:10.1002/adma.201204306 · Cited by 492
Matsuo, Y., Sato, Y., Niinomi, T., Soga, I., Tanaka, H., & Nakamura, E. (2009) · Journal of the American Chemical Society · doi:10.1021/ja9048702 · Cited by 488
Lu, L., Chen, W., Xu, T., & Yu, L. (2015) · Nature Communications · doi:10.1038/ncomms8327 · Cited by 458
Jung, J. W., Jo, J. W., Chueh, C., Liu, F., Jo, W. H., Russell, T. P., & Jen, A. K. ‐. (2015) · Advanced Materials · doi:10.1002/adma.201501214 · Cited by 444
Hoven, C. V., Dang, X., Coffin, R. C., Peet, J., Nguyen, T., & Bazan, G. C. (2010) · Advanced Materials · doi:10.1002/adma.200903677 · Cited by 441
Polymer bulk heterojunction solar cells employing Förster resonance energy transfer
Huang, J.-S., Goh, T., Li, X., Sfeir, M. Y., Bielinski, E. A., Tomasulo, S., Lee, M. L., Hazari, N., & Taylor, A. D. (2013) · Nature Photonics · doi:10.1038/nphoton.2013.82 · Cited by 435
Markov, D. E., Amsterdam, E., Blom, P. W. M., Sieval, A. B., & Hummelen, J. C. (2005) · The Journal of Physical Chemistry A · doi:10.1021/jp0509663 · Cited by 432
7.7% Efficient All‐Polymer Solar Cells
Hwang, Y., Courtright, B. A. E., Ferreira, A. S., Tolbert, S. H., & Jenekhe, S. A. (2015) · Advanced Materials · doi:10.1002/adma.201501604 · Cited by 432
Chen, W., Xu, T., He, F., Wang, W., Wang, C., Strzalka, J., Liu, Y., Wen, J., Miller, D. J., Chen, J., et al. (2011) · Nano Letters · doi:10.1021/nl201715q · Cited by 424
Self-citationA Star‐Shaped Perylene Diimide Electron Acceptor for High‐Performance Organic Solar Cells
Lin, Y., Wang, Y., Wang, J., Hou, J., Li, Y., Zhu, D., & Zhan, X. (2014) · Advanced Materials · doi:10.1002/adma.201400525 · Cited by 414
Self-citationWoo, C. H., Thompson, B. C., Kim, B. J., Toney, M. F., & Fréchet, J. M. J. (2008) · Journal of the American Chemical Society · doi:10.1021/ja806493n · Cited by 410
Mapping Polymer Donors toward High‐Efficiency Fullerene Free Organic Solar Cells
Lin, Y., Zhao, F., Wu, Y., Chen, K., Xia, Y., Li, G., Prasad, S. K. K., Zhu, J., Huo, L., Bin, H., et al. (2017) · Advanced Materials · doi:10.1002/adma.201604155 · Cited by 403
Self-citationGasparini, N., Jiao, X., Heumueller, T., Baran, D., Matt, G. J., Fladischer, S., Spiecker, E., Ade, H., Brabec, C. J., & Ameri, T. (2016) · Nature Energy · doi:10.1038/nenergy.2016.118 · Cited by 368
On the morphology of polymer‐based photovoltaics
Liu, F., Gu, Y., Jung, J. W., Jo, W. H., & Russell, T. P. (2012) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.23063 · Cited by 323
Predicting Morphologies of Solution Processed Polymer:Fullerene Blends
Kouijzer, S., Michels, J. J., van den Berg, M., Gevaerts, V. S., Turbiez, M., Wienk, M. M., & Janssen, R. A. J. (2013) · Journal of the American Chemical Society · doi:10.1021/ja405493j · Cited by 316
A planar electron acceptor for efficient polymer solar cells
Wu, Y., Bai, H., Wang, Z., Cheng, P., Zhu, S., Wang, Y., Ma, W., & Zhan, X. (2015) · Energy & Environmental Science · doi:10.1039/c5ee02477c · Cited by 314
Self-citationCoffey, D. C., Reid, O. G., Rodovsky, D. B., Bartholomew, G. P., & Ginger, D. S. (2007) · Nano Letters · doi:10.1021/nl062989e · Cited by 306
Osaka, I., Saito, M., Koganezawa, T., & Takimiya, K. (2014) · Advanced Materials · doi:10.1002/adma.201303059 · Cited by 301
Lu, H., Zhang, J., Chen, J., Liu, Q., Gong, X., Feng, S., Xu, X., Ma, W., & Bo, Z. (2016) · Advanced Materials · doi:10.1002/adma.201603588 · Cited by 280
Cheng, P., Li, Y., & Zhan, X. (2014) · Energy & Environmental Science · doi:10.1039/c3ee44202k · Cited by 276
Self-citationPolymer Crystallization of Partially Miscible Polythiophene/Fullerene Mixtures Controls Morphology
Kozub, D. R., Vakhshouri, K., Orme, L. M., Wang, C., Hexemer, A., & Gomez, E. D. (2011) · Macromolecules · doi:10.1021/ma200855r · Cited by 272
Self-citationYe, L., Zhao, W., Li, S., Mukherjee, S., Carpenter, J. H., Awartani, O., Jiao, X., Hou, J., & Ade, H. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201602000 · Cited by 268
Mobility-Controlled Performance of Thick Solar Cells Based on Fluorinated Copolymers
Li, W., Albrecht, S., Yang, L., Roland, S., Tumbleston, J. R., McAfee, T., Yan, L., Kelly, M. A., Ade, H., Neher, D., et al. (2014) · Journal of the American Chemical Society · doi:10.1021/ja5067724 · Cited by 267
Liu, T., Guo, Y., Yi, Y., Huo, L., Xue, X., Sun, X., Fu, H., Xiong, W., Meng, D., Wang, Z., et al. (2016) · Advanced Materials · doi:10.1002/adma.201602570 · Cited by 264
Photoluminescence quenching at apolythiophene/C60heterojunction
Theander, M., Yartsev, A., Zigmantas, D., Sundström, V., Mammo, W., Andersson, M. R., & Inganäs, O. (2000) · Physical Review B · doi:10.1103/physrevb.61.12957 · Cited by 246
Ma, W., Kim, J. Y., Lee, K., & Heeger, A. J. (2007) · Macromolecular Rapid Communications · doi:10.1002/marc.200700280 · Cited by 238
Solvent‐Induced Morphology in Polymer‐Based Systems for Organic Photovoltaics
Ruderer, M. A., Guo, S., Meier, R., Chiang, H., Körstgens, V., Wiedersich, J., Perlich, J., Roth, S. V., & Müller‐Buschbaum, P. (2011) · Advanced Functional Materials · doi:10.1002/adfm.201100945 · Cited by 231
Wang, J.-L., Liu, K.-K., Yan, J., Wu, Z., Liu, F., Xiao, F., Chang, Z.-F., Wu, H.-B., Cao, Y., & Russell, T. P. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b03495 · Cited by 225
Efficient Polymer Solar Cells Based on a Low Bandgap Semi‐crystalline DPP Polymer‐PCBM Blends
Liu, F., Gu, Y., Wang, C., Zhao, W., Chen, D., Briseno, A. L., & Russell, T. P. (2012) · Advanced Materials · doi:10.1002/adma.201200902 · Cited by 220
Self-citationAlloy Acceptor: Superior Alternative to PCBM toward Efficient and Stable Organic Solar Cells
Cheng, P., Yan, C., Wu, Y., Wang, J., Qin, M., An, Q., Cao, J., Huo, L., Zhang, F., Ding, L., et al. (2016) · Advanced Materials · doi:10.1002/adma.201602067 · Cited by 220
Self-citationBartelt, J. A., Douglas, J. D., Mateker, W. R., Labban, A. E., Tassone, C. J., Toney, M. F., Fréchet, J. M. J., Beaujuge, P. M., & McGehee, M. D. (2014) · Advanced Energy Materials · doi:10.1002/aenm.201301733 · Cited by 214
Lin, Y., Ma, L., Li, Y., Liu, Y., Zhu, D., & Zhan, X. (2013) · Advanced Energy Materials · doi:10.1002/aenm.201300181 · Cited by 210
Self-citationSynergistic Effect of Polymer and Small Molecules for High‐Performance Ternary Organic Solar Cells
Zhang, Y., Deng, D., Lu, K., Zhang, J., Xia, B., Zhao, Y., Fang, J., & Wei, Z. (2015) · Advanced Materials · doi:10.1002/adma.201404902 · Cited by 205
Groves, C., Reid, O. G., & Ginger, D. S. (2010) · Accounts of Chemical Research · doi:10.1021/ar900231q · Cited by 196
Film Morphology of High Efficiency Solution‐Processed Small‐Molecule Solar Cells
Love, J. A., Proctor, C. M., Liu, J., Takacs, C. J., Sharenko, A., van der Poll, T. S., Heeger, A. J., Bazan, G. C., & Nguyen, T. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201300099 · Cited by 192
Swaraj, S., Wang, C., Yan, H., Watts, B., Lüning, J., McNeill, C. R., & Ade, H. (2010) · Nano Letters · doi:10.1021/nl1009266 · Cited by 191
Self-citationAchieving High‐Performance Ternary Organic Solar Cells through Tuning Acceptor Alloy
Chen, Y., Ye, P., Zhu, Z., Wang, X., Yang, L., Xu, X., Wu, X., Dong, T., Zhang, H., Hou, J., et al. (2017) · Advanced Materials · doi:10.1002/adma.201603154 · Cited by 191
Interfacial Segregation in Polymer/Fullerene Blend Films for Photovoltaic Devices
Germack, D. S., Chan, C. K., Kline, R. J., Fischer, D. A., Gundlach, D. J., Toney, M. F., Richter, L. J., & DeLongchamp, D. M. (2010) · Macromolecules · doi:10.1021/ma100027b · Cited by 187
Ji, Y., Xiao, C., Wang, Q., Zhang, J., Li, C., Wu, Y., Wei, Z., Zhan, X., Hu, W., Wang, Z., et al. (2016) · Advanced Materials · doi:10.1002/adma.201504272 · Cited by 184
Self-citationVersatile third components for efficient and stable organic solar cells
Cheng, P., & Zhan, X. (2015) · Materials Horizons · doi:10.1039/c5mh00090d · Cited by 179
Self-citationChen, H.-Y., Yang, H., Yang, G., Sista, S., Zadoyan, R., Li, G., & Yang, Y. (2009) · The Journal of Physical Chemistry C · doi:10.1021/jp810798z · Cited by 178
Li, M., Liu, F., Wan, X., Ni, W., Kan, B., Feng, H., Zhang, Q., Yang, X., Wang, Y., Zhang, Y., et al. (2015) · Advanced Materials · doi:10.1002/adma.201502645 · Cited by 177
Ren, G., Ahmed, E., & Jenekhe, S. A. (2011) · Advanced Energy Materials · doi:10.1002/aenm.201100285 · Cited by 172
Osaka, I., Saito, M., Mori, H., Koganezawa, T., & Takimiya, K. (2012) · Advanced Materials · doi:10.1002/adma.201103065 · Cited by 169
Understanding Morphology Compatibility for High-Performance Ternary Organic Solar Cells
Mai, J., Lau, T.-K., Li, J., Peng, S.-H., Hsu, C.-S., Jeng, U.-S., Zeng, J., Zhao, N., Xiao, X., & Lu, X. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b02264 · Cited by 169
Molecular Lock: A Versatile Key to Enhance Efficiency and Stability of Organic Solar Cells
Cheng, P., Yan, C., Lau, T., Mai, J., Lu, X., & Zhan, X. (2016) · Advanced Materials · doi:10.1002/adma.201600426 · Cited by 166
Self-citationLin, Y., Li, T., Zhao, F., Han, L., Wang, Z., Wu, Y., He, Q., Wang, J., Huo, L., Sun, Y., et al. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201600854 · Cited by 166
Self-citationStudy of Schultz distribution to model polydispersity of microemulsion droplets
Kotlarchyk, M., Stephens, R. B., & Huang, J. S. (1988) · The Journal of Physical Chemistry · doi:10.1021/j100317a032 · Cited by 165
Graham, K. R., Wieruszewski, P. M., Stalder, R., Hartel, M. J., Mei, J., So, F., & Reynolds, J. R. (2012) · Advanced Functional Materials · doi:10.1002/adfm.201102456 · Cited by 165
Schmidt, K., Tassone, C. J., Niskala, J. R., Yiu, A. T., Lee, O. P., Weiss, T. M., Wang, C., Fréchet, J. M. J., Beaujuge, P. M., & Toney, M. F. (2014) · Advanced Materials · doi:10.1002/adma.201303622 · Cited by 164
Self-citationPerez, L. A., Chou, K. W., Love, J. A., van der Poll, T. S., Smilgies, D., Nguyen, T., Kramer, E. J., Amassian, A., & Bazan, G. C. (2013) · Advanced Materials · doi:10.1002/adma.201302389 · Cited by 163
Liu, T., Huo, L., Sun, X., Fan, B., Cai, Y., Kim, T., Kim, J. Y., Choi, H., & Sun, Y. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201502109 · Cited by 163
Correlating Structure with Function in Thermally Annealed PCDTBT:PC70BM Photovoltaic Blends
Wang, T., Pearson, A. J., Dunbar, A. D. F., Staniec, P. A., Watters, D. C., Yi, H., Ryan, A. J., Jones, R., Iraqi, A., & Lidzey, D. G. (2012) · Advanced Functional Materials · doi:10.1002/adfm.201102510 · Cited by 154
Nanoscale structure measurements for polymer-fullerene photovoltaics
DeLongchamp, D. M., Kline, R. J., & Herzing, A. A. (2012) · Energy & Environmental Science · doi:10.1039/c2ee02725a · Cited by 153
Wessendorf, C. D., Schulz, G. L., Mishra, A., Kar, P., Ata, I., Weidelener, M., Urdanpilleta, M., Hanisch, J., Mena‐Osteritz, E., Lindén, M., et al. (2014) · Advanced Energy Materials · doi:10.1002/aenm.201400266 · Cited by 152
Xiao, Z., Yuan, Y., Yang, B., VanDerslice, J., Chen, J., Dyck, O., Duscher, G. J., & Huang, J. (2014) · Advanced Materials · doi:10.1002/adma.201305196 · Cited by 150
Liao, H., Tsao, C.-S., Lin, T.-H., Chuang, C.-M., Chen, C.-Y., Jeng, U., Su, C.-H., Chen, Y., & Su, W. (2011) · Journal of the American Chemical Society · doi:10.1021/ja202977r · Cited by 146
Drummy, L. F., Davis, R. J., Moore, D. L., Durstock, M. F., Vaia, R. A., & Hsu, J. W. P. (2010) · Chemistry of Materials · doi:10.1021/cm102463t · Cited by 142
The role of solvent vapor annealing in highly efficient air-processed small molecule solar cells
Sun, K., Xiao, Z., Hanssen, E. G., Klein, M. F. G., Dam, H. H., Pfaff, M., Gerthsen, D., Wong, W. W. H., & Jones, D. J. (2014) · Journal of Materials Chemistry A · doi:10.1039/c4ta01125b · Cited by 141
Solvent additives and their effects on blend morphologies of bulk heterojunctions
Salim, T., Wong, L. H., Bräuer, B., Kukreja, R., Foo, Y. L., Bao, Z., & Lam, Y. M. (2010) · Journal of Materials Chemistry · doi:10.1039/c0jm01976c · Cited by 141
Pivrikas, A., Neugebauer, H., & Sariçiftçi, N. S. (2010) · Solar Energy · doi:10.1016/j.solener.2010.10.012 · Cited by 140
A Twisted Dimeric Perylene Diimide Electron Acceptor for Efficient Organic Solar Cells
Lin, Y., Wang, J., Dai, S., Li, Y., Zhu, D., & Zhan, X. (2014) · Advanced Energy Materials · doi:10.1002/aenm.201400420 · Cited by 137
Self-citationYan, Y., Liu, X., & Wang, T. (2017) · Advanced Materials · doi:10.1002/adma.201601674 · Cited by 128
Wang, J., Wu, Z. K., Miao, J., Liu, K., Chang, Z., Zhang, R., Wu, H., & Cao, Y. (2015) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b00848 · Cited by 119
Wang, Y., Liu, Y., Chen, S., Peng, R., & Ge, Z. (2013) · Chemistry of Materials · doi:10.1021/cm401618h · Cited by 118
Watching the Annealing Process One Polymer Chain at a Time
Vogelsang, J., Brazard, J., Adachi, T., Bolinger, J. C., & Barbara, P. F. (2011) · Angewandte Chemie International Edition · doi:10.1002/anie.201007084 · Cited by 114
Graham, K. R., Mei, J., Stalder, R., Shim, J. W., Cheun, H., Steffy, F., So, F. F., Kippelen, B. J., & Reynolds, J. R. (2011) · ACS Applied Materials & Interfaces · doi:10.1021/am2000328 · Cited by 113
Park, G. E., Choi, S., Park, S. Y., Lee, D. H., Cho, M. J., & Choi, D. H. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700566 · Cited by 108
Shin, M., Kim, H., Park, J., Nam, S., Heo, K., Ree, M., Ha, C., & Kim, Y. (2010) · Advanced Functional Materials · doi:10.1002/adfm.200901655 · Cited by 107
Bilayer order in a polycarbazole-conjugated polymer
Lu, X., Hlaing, H. M., Germack, D. S., Peet, J., Jo, W. H., Andrienko, D., Kremer, K., & Ocko, B. M. (2012) · Nature Communications · doi:10.1038/ncomms1790 · Cited by 105
Wang, J., Xiao, F., Yan, J. W., Wu, Z. K., Liu, K., Chang, Z., Zhang, R., Chen, H., Wu, H., & Cao, Y. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201505020 · Cited by 102
Ye, L., Xiong, Y., Yao, H., Gadisa, A., Zhang, H., Li, S., Ghasemi, M., Balar, N., Hunt, A. H., O’Connor, B. T., et al. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b03083 · Cited by 97
Toward Efficient Thick Active PTB7 Photovoltaic Layers Using Diphenyl Ether as a Solvent Additive
Zheng, Y., Goh, T., Fan, P., Shi, W. Y., Yu, J., & Taylor, A. D. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b03453 · Cited by 96
Optimized “Alloy‐Parallel” Morphology of Ternary Organic Solar Cells
Wang, Z., Zhang, Y., Zhang, J., Wei, Z., & Ma, W. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201502456 · Cited by 95
Bai, H., Wu, Y., Wang, Y., Wu, Y., Li, R., Cheng, P., Zhang, M., Wang, J., Ma, W., & Zhan, X. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta05901a · Cited by 93
Self-citationEfficient organic ternary solar cells with the third component as energy acceptor
An, Q., Zhang, F., Sun, Q., Zhang, M., Zhang, J., Tang, W., Yin, X., & Deng, Z. (2016) · Nano Energy · doi:10.1016/j.nanoen.2016.05.018 · Cited by 92
Sun, Y., Cui, C., Wang, H., & Li, Y. (2011) · Advanced Energy Materials · doi:10.1002/aenm.201100378 · Cited by 91
Xia, D., Wu, Y., Wang, Q., Zhang, A., Li, C., Lin, Y., Colberts, F. J. M., van Franeker, J. J., Janssen, R. A. J., Zhan, X., et al. (2016) · Macromolecules · doi:10.1021/acs.macromol.6b01326 · Cited by 87
Self-citationTamayo, A., Kent, T. J., Tantitiwat, M., Dante, M., Rogers, J. T., & Nguyen, T. (2009) · Energy & Environmental Science · doi:10.1039/b912824g · Cited by 86
Liu, Y., Larsen‐Olsen, T. T., Zhao, X., Andreasen, B., Søndergaard, R. R., Helgesen, M., Norrman, K., Jørgensen, M., Krebs, F. C., & Zhan, X. (2013) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2013.01.025 · Cited by 85
Self-citationEffect of Processing Additives on Organic Photovoltaics: Recent Progress and Future Prospects
Kwon, S., Kang, H., Lee, J., Lee, J., Hong, S., Kim, H., & Lee, K. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201601496 · Cited by 85
Yuan, J., & Ma, W. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta06648k · Cited by 83
Zuo, Y., Ni, W., Zhang, Q., Li, M., Kan, B., Wan, X., & Chen, Y. (2014) · Journal of Materials Chemistry C · doi:10.1039/c4tc00994k · Cited by 83
Nam, S., Jang, J., Cha, H., Hwang, J., An, T. K., Park, S., & Park, C. E. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm15260f · Cited by 82
Dang, M. T., & Wuest, J. D. (2013) · Chemical Society Reviews · doi:10.1039/c3cs35447d · Cited by 73
Uddin, M. A., Kim, Y., Younts, R., Lee, W., Gautam, B., Choi, J., Wang, C., Gündoğdu, K., Kim, B. J., & Woo, H. Y. (2016) · Macromolecules · doi:10.1021/acs.macromol.6b01414 · Cited by 72
Self-citationAn, Q., Zhang, F., Sun, Q., Wang, J., Li, L., Zhang, J., Tang, W., & Deng, Z. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta04243g · Cited by 71
The Role of Solvent Additive Processing in High Performance Small Molecule Solar Cells
Perez, L. A., Rogers, J. T., Brady, M. A., Sun, Y., Welch, G. C., Schmidt, K., Toney, M. F., Jinnai, H., Heeger, A. J., Chabinyc, M. L., et al. (2014) · Chemistry of Materials · doi:10.1021/cm5031987 · Cited by 65
Xin, H., Guo, X., Ren, G., Watson, M. D., & Jenekhe, S. A. (2012) · Advanced Energy Materials · doi:10.1002/aenm.201100718 · Cited by 64
Guided crystallization of P3HT in ternary blend solar cell based on P3HT:PCPDTBT:PCBM
Gu, Y., Wang, C., Liu, F., Chen, J., Dyck, O., Duscher, G. J., & Russell, T. P. (2014) · Energy & Environmental Science · doi:10.1039/c4ee02004a · Cited by 63
Self-citationThe Role of Additive in Diketopyrrolopyrrole‐Based Small Molecular Bulk Heterojunction Solar Cells
Wang, H., Liu, F., Bu, L., Gao, J., Wang, C., Wei, W., & Russell, T. P. (2013) · Advanced Materials · doi:10.1002/adma.201302848 · Cited by 63
Self-citationHigh-performance alloy model-based ternary small molecule solar cells
An, Q., Zhang, F., Yin, X., Sun, Q., Zhang, M., Zhang, J., Tang, W., & Deng, Z. (2016) · Nano Energy · doi:10.1016/j.nanoen.2016.10.021 · Cited by 61
Jung, M., Yoon, Y., Park, J. H., Cha, W., Kim, A., Kang, J., Gautam, S., Seo, D., Cho, J. H., Kim, H., et al. (2014) · ACS Nano · doi:10.1021/nn501133y · Cited by 60
Efficiency enhancement in small molecule bulk heterojunction organic solar cells via additive
Fan, H., Shang, H., Li, Y., & Zhan, X. (2010) · Applied Physics Letters · doi:10.1063/1.3491268 · Cited by 59
Self-citationFunctional Scanning Probe Imaging of Nanostructured Solar Energy Materials
Giridharagopal, R., Cox, P. A., & Ginger, D. S. (2016) · Accounts of Chemical Research · doi:10.1021/acs.accounts.6b00255 · Cited by 59
Kamkar, D. A., Wang, M., Wudl, F., & Nguyen, T. (2012) · ACS Nano · doi:10.1021/nn204565h · Cited by 58
Chen, H., Peet, J., Hu, S., Azoulay, J. D., Bazan, G. C., & Dadmun, M. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201300862 · Cited by 56
Wang, J., Yao, Y., Dai, S., Zhang, X., Wang, W., He, Q., Han, L., Lin, Y., & Zhan, X. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta02589c · Cited by 55
Self-citationZhong, H., Ye, L., Chen, J., Jo, S. B., Chueh, C., Carpenter, J. H., Ade, H. W., & Jen, A. K. ‐. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta02391j · Cited by 53
Yan, C., Wu, Y., Wang, J., Li, R., Cheng, P., Bai, H., Zhan, Z., Ma, W., & Zhan, X. (2016) · Dyes and Pigments · doi:10.1016/j.dyepig.2016.12.065 · Cited by 51
Self-citationMiao, J., Chen, H., Liu, F., Zhao, B., Hu, L., He, Z., & Wu, H. (2015) · Applied Physics Letters · doi:10.1063/1.4919707 · Cited by 50
Love, J. A., Collins, S. D., Nagao, I., Mukherjee, S., Ade, H. W., Bazan, G. C., & Nguyen, T. (2014) · Advanced Materials · doi:10.1002/adma.201402403 · Cited by 50
Du, Z., Chen, W., Chen, Y., Qiao, S., Bao, X., Wen, S., Sun, M., Han, L., & Yang, R. (2014) · Journal of Materials Chemistry A · doi:10.1039/c4ta03314k · Cited by 48
A DMF-assisted solution process boosts the efficiency in P3HT:PCBM solar cells up to 5.31%
Cheng, P., Li, Y., & Zhan, X. (2013) · Nanotechnology · doi:10.1088/0957-4484/24/48/484008 · Cited by 46
Self-citationTailor-Made Additives for Morphology Control in Molecular Bulk-Heterojunction Photovoltaics
Graham, K. R., Stalder, R., Wieruszewski, P. M., Patel, D. G., Salazar, D. H., & Reynolds, J. R. (2012) · ACS Applied Materials & Interfaces · doi:10.1021/am301944g · Cited by 45
Schaffer, C. J., Schlipf, J., Indari, E. D., Su, B., Bernstorff, S., & Müller‐Buschbaum, P. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b05939 · Cited by 42
Single crystalline indene-C 60 bisadduct: isolation and application in polymer solar cells
Zhao, F., Meng, X., Feng, Y., Jin, Z., Zhou, Q., Li, H., Jiang, L., Wang, J., Li, Y., & Wang, C. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta04040j · Cited by 40
Self-citationZhang, A., Wang, Q., Bovee, R. A. A., Li, C., Zhang, J., Zhou, Y., Wei, Z., Li, Y., Janssen, R. A. J., Wang, Z., et al. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta00962j · Cited by 38
Wu, Y., Zou, Y., Yang, H., Li, Y., Li, H., Cui, C., & Li, Y. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b11488 · Cited by 38
Zawacka, N. K., Andersen, T. R., Andreasen, J. W., Rossander, L. H., Dam, H. F., Jørgensen, M., & Krebs, F. C. (2014) · Journal of Materials Chemistry A · doi:10.1039/c4ta03484h · Cited by 37
Schulz, G. L., Löbert, M., Ata, I., Urdanpilleta, M., Lindén, M., Mishra, A., & Bäuerle, P. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta02877a · Cited by 34
Kwon, S., Park, J. K., Kim, J., Kim, G., Yu, K., Lee, J., Jo, Y., Kim, B., Kang, H., Kim, J., et al. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta00833f · Cited by 30
Du, X., Jiao, X., Rechberger, S., Perea, J. D., Meyer, M., Kazerouni, N., Spiecker, E., Ade, H. W., Brabec, C. J., Fink, R., et al. (2017) · Macromolecules · doi:10.1021/acs.macromol.6b02699 · Cited by 30
Jung, B., Kim, K. M., Eom, Y., & Kim, W. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b01658 · Cited by 29
Wang, K., Azouz, M., Babics, M., Cruciani, F., Marszałek, T., Saleem, Q., Pisula, W., & Beaujuge, P. M. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b01763 · Cited by 29
Farahat, M. E., Patra, D., Lee, C., & Chu, C. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b06831 · Cited by 23
Ren, J., Zhang, Y., Liu, F., Yan, Y., Qiu, M., Roy, V. A. L., Zheng, H., Sun, M., & Yang, R. (2016) · RSC Advances · doi:10.1039/c6ra13970a · Cited by 14
Xia, Y., Zhang, H., Li, J., Tong, J., Zhang, P., & Yang, C. (2014) · Journal of Polymer Research · doi:10.1007/s10965-014-0633-y · Cited by 13
Zhou, W., Xie, Y., Hu, X., Zhang, L., Meng, X., Zhang, Y., Ma, W., & Chen, Y. (2015) · Physical Chemistry Chemical Physics · doi:10.1039/c5cp05644f · Cited by 13
Kim, G., Lee, G., Moon, B. J., Kim, H. I., & Park, T. (2014) · Organic Electronics · doi:10.1016/j.orgel.2014.07.038 · Cited by 12
Liao, X., Wu, F., Chen, L., & Chen, Y. (2016) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.6b05887 · Cited by 11
Cited by
Polymer Semiconductors: Synthesis, Processing, and Applications
Ding, L., Yu, Z.-D., Wang, X.-Y., Yao, Z.-F., Lu, Y., Yang, C.-Y., Wang, J.-Y., & Pei, J. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00696 · Cited by 539
Sun, R., Wu, Q., Guo, J., Wang, T., Wu, Y., Qiu, B., Luo, Z., Yang, W., Hu, Z., Guo, J., et al. (2020) · Joule · doi:10.1016/j.joule.2019.12.004 · Cited by 392
Bao, S., Yang, H., Fan, H., Zhang, J., Wei, Z., Cui, C., & Li, Y. (2021) · Advanced Materials · doi:10.1002/adma.202105301 · Cited by 325
Yang, W., Luo, Z., Sun, R., Guo, J., Wang, T., Wu, Y., Wang, W., Guo, J., Wu, Q., Shi, M., et al. (2020) · Nature Communications · doi:10.1038/s41467-020-14926-5 · Cited by 301
Khasbaatar, A., Xu, Z., Lee, J.-H., Campillo-Alvarado, G., Hwang, C., Onusaitis, B. N., & Diao, Y. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00905 · Cited by 290
Metadata
- Authors
- Zhao, F., Wang, C., & Zhan, X.
- Venue
- Advanced Energy Materials
- Publisher
- Wiley
- Published
- 2018-03-13
- Volume
- 8
- Issue
- 28
- ISSN
- 1614-6832 (ISSN-L)
- 1614-6840
- OpenAlex
- W2792272594
- Cited by
- 630
- References
- 175
- FWCI
- 22.96
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.