The DOI matches its Crossref record; 35 of the 35 references it cites were found in a registry or an index.
Constructing Multifunctional Interphase between Li1.4Al0.4Ti1.6(PO4)3 and Li Metal by Magnetron Sputtering for Highly Stable Solid‐State Lithium Metal Batteries
Abstract
Due to high ionic conductivity and low cost, Li 1.4 Al 0.4 Ti 1.6(PO 4)3 (LATP) has emerged as a promising solid‐state electrolyte for next‐generation lithium (Li) metal solid‐state batterie with high safety performance and energy density. However, the extremely high impedance and surface instability of LATP with Li metal retard its practical application. Herein, a novel method is proposed to construct an ultrathin ZnO layer that is tightly coated on the LATP pellets, surface (ZnO@LATP) via magnetron sputtering, which in situ reacts with Li to form a low electronic conductivity and multifunctional solid electrolyte interphase (SEI). The formed SEI can not only effectively lower the interfacial resistance, but also overcome the side reactions of LATP with the Li metal anode and suppress the Li dendrite growth. Specifically, the interface resistance decreases from 80 554 to 353 Ω and the overpotential reduces from 1 V to 20 mV. As a result, the Li/ZnO@LATP@ZnO/Li symmetric batteries can stably cycle for more than 2000 h without short circuit at 0.05 mA cm−2 and Li/ZnO@LATP/LiFePO 4 batteries show excellent cycle stability for 200 cycles at 0.1 C. This work highlights the significance of multifunctional interphase between LATP and Li metal for improvement of interfacial impedance and instability.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Issues and challenges facing rechargeable lithium batteries
Tarascon, J.-M., & Armand, M. (2001) · Nature · doi:10.1038/35104644 · Cited by 21,130
Challenges for Rechargeable Li Batteries
Goodenough, J. B., & Kim, Y. (2010) · Chemistry of Materials · doi:10.1021/cm901452z · Cited by 10,943
Reviving the lithium metal anode for high-energy batteries
Lin, D., Liu, Y., & Cui, Y. (2017) · Nature Nanotechnology · doi:10.1038/nnano.2017.16 · Cited by 6,763
A lithium superionic conductor
Kamaya, N., Homma, K., Yamakawa, Y., Hirayama, M., Kanno, R., Yonemura, M., Kamiyama, T., Kato, Y., Hama, S., Kawamoto, K., et al. (2011) · Nature Materials · doi:10.1038/nmat3066 · Cited by 4,978
Lithium battery chemistries enabled by solid-state electrolytes
Manthiram, A., Yu, X., & Wang, S. (2017) · Nature Reviews Materials · doi:10.1038/natrevmats.2016.103 · Cited by 4,689
Fast Lithium Ion Conduction in Garnet‐Type Li7La3Zr2O12
Murugan, R., Thangadurai, V., & Weppner, W. (2007) · Angewandte Chemie International Edition · doi:10.1002/anie.200701144 · Cited by 3,250
Magnetron sputtering: a review of recent developments and applications
Kelly, P. J., & Arnell, R. D. (2000) · Vacuum · doi:10.1016/s0042-207x(99)00189-x · Cited by 2,136
Negating interfacial impedance in garnet-based solid-state Li metal batteries
Han, X., Gong, Y., Fu, K., He, X., Hitz, G. T., Dai, J., Pearse, A., Liu, B., Wang, H., Rubloff, G., et al. (2017) · Nature Materials · doi:10.1038/nmat4821 · Cited by 2,025
High electronic conductivity as the origin of lithium dendrite formation within solid electrolytes
Han, F., Westover, A. S., Yue, J., Fan, X., Wang, F., Chi, M., Leonard, D. N., Dudney, N. J., Wang, H., & Wang, C. (2019) · Nature Energy · doi:10.1038/s41560-018-0312-z · Cited by 1,695
Lithium–Sulfur Batteries: Progress and Prospects
Manthiram, A., Chung, S., & Zu, C. (2015) · Advanced Materials · doi:10.1002/adma.201405115 · Cited by 1,620
Gao, Z., Sun, H., Fu, L., Ye, F., Zhang, Y., Luo, W., & Huang, Y. (2018) · Advanced Materials · doi:10.1002/adma.201705702 · Cited by 1,300
Plating a Dendrite-Free Lithium Anode with a Polymer/Ceramic/Polymer Sandwich Electrolyte
Zhou, W., Wang, S., Li, Y., Xin, S., Manthiram, A., & Goodenough, J. B. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b05341 · Cited by 1,006
Fu, K. (., Gong, Y., Liu, B., Zhu, Y., Xu, S., Yao, Y., Luo, W., Wang, C., Lacey, S. D., Dai, J., et al. (2017) · Science Advances · doi:10.1126/sciadv.1601659 · Cited by 842
Intergranular Li metal propagation through polycrystalline Li6.25Al0.25La3Zr2O12 ceramic electrolyte
Cheng, E. J., Sharafi, A., & Sakamoto, J. S. (2016) · Electrochimica Acta · doi:10.1016/j.electacta.2016.12.018 · Cited by 708
Wang, C., Gong, Y., Liu, B., Fu, K., Yao, Y., Hitz, E., Li, Y., Dai, J., Xu, S., Luo, W., et al. (2017) · Nano Letters · doi:10.1021/acs.nanolett.6b04695 · Cited by 682
Sulfide Solid Electrolytes for Lithium Battery Applications
Lau, J., DeBlock, R. H., Butts, D. M., Ashby, D. S., Choi, C. S., & Dunn, B. S. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201800933 · Cited by 678
Transition from Superlithiophobicity to Superlithiophilicity of Garnet Solid-State Electrolyte
Luo, W., Gong, Y., Zhu, Y., Fu, K. K., Dai, J., Lacey, S. D., Wang, C., Liu, B., Han, X., Mo, Y., et al. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b06777 · Cited by 671
Luo, W., Gong, Y., Zhu, Y., Li, Y., Yao, Y., Zhang, Y., Fu, K. (., Pastel, G., Lin, C., Mo, Y., et al. (2017) · Advanced Materials · doi:10.1002/adma.201606042 · Cited by 651
Wenzel, S., Leichtweiss, T., Krüger, D., Sann, J., & Janek, J. (2015) · Solid State Ionics · doi:10.1016/j.ssi.2015.06.001 · Cited by 607
Crystal structure and ionic conductivity of Li14Zn(GeO4)4 and other new Li+ superionic conductors
Hong, H. Y.-P. (1978) · Materials Research Bulletin · doi:10.1016/0025-5408(78)90075-2 · Cited by 553
Hartmann, P., Leichtweiss, T., Busche, M. R., Schneider, M., Reich, M., Sann, J., Adelhelm, P., & Janek, J. (2013) · The Journal of Physical Chemistry C · doi:10.1021/jp4051275 · Cited by 523
Zhao, N., Khokhar, W., Bi, Z., Shi, C., Guo, X., Fan, L.-Z., & Nan, C.-W. (2019) · Joule · doi:10.1016/j.joule.2019.03.019 · Cited by 492
Magnetron sputtering – Milestones of 30 years
Bräuer, G., Szyszka, B., Vergöhl, M., et al. (2010) · Vacuum · doi:10.1016/j.vacuum.2009.12.014 · Cited by 433
Li, D., Chen, L., Wang, T., & Fan, L.-Z. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b18123 · Cited by 398
Recent advances in Li1+xAlxTi2−x(PO4)3 solid-state electrolyte for safe lithium batteries
Xiao, W., Wang, J., Fan, L., Zhang, J., & Li, X. (2019) · Energy Storage Materials · doi:10.1016/j.ensm.2018.10.012 · Cited by 374
Ye, H., Zheng, Z., Yao, H., Liu, S., Zuo, T., Wu, X., Yin, Y., Li, N., Gu, J., Cao, F., et al. (2019) · Angewandte Chemie International Edition · doi:10.1002/anie.201811955 · Cited by 360
Recent progress in solid oxide and lithium ion conducting electrolytes research
Thangadurai, V., & Weppner, W. (2006) · Ionics · doi:10.1007/s11581-006-0013-7 · Cited by 353
Cheng, Q., Li, A., Li, N., Li, S., Zangiabadi, A., Li, T.-D., Huang, W., Li, A. C., Jin, T., Song, Q., et al. (2019) · Joule · doi:10.1016/j.joule.2019.03.022 · Cited by 350
Stabilizing the Interface of NASICON Solid Electrolyte against Li Metal with Atomic Layer Deposition
Liu, Y., Sun, Q., Zhao, Y., Wang, B., Kaghazchi, P., Adair, K. R., Li, R., Zhang, C., Liu, J., Kuo, L.-Y., et al. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b06366 · Cited by 312
Self-citationRevealing the Short‐Circuiting Mechanism of Garnet‐Based Solid‐State Electrolyte
Song, Y., Yang, L., Zhao, W., Wang, Z., Zhao, Y., Wang, Z., Zhao, Q., Liu, H., & Pan, F. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201900671 · Cited by 255
Self-citationHe, M., Cui, Z., Chen, C., Li, Y., & Guo, X. (2018) · Journal of Materials Chemistry A · doi:10.1039/c8ta02276c · Cited by 243
Shen, X., Mu, D., Chen, S., Wu, B., & Wu, F. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am400020n · Cited by 228
Rechargeable thin-film lithium batteries
BATES, J., GRUZALSKI, G., DUDNEY, N., LUCK, C., & YU, X. (1994) · Solid State Ionics · doi:10.1016/0167-2738(94)90383-2 · Cited by 215
A Plastic–Crystal Electrolyte Interphase for All‐Solid‐State Sodium Batteries
Gao, H., Xue, L., Xin, S., Park, K., & Goodenough, J. B. (2017) · Angewandte Chemie International Edition · doi:10.1002/anie.201702003 · Cited by 210
Recent advances in magnetron sputtering
Arnell, R. D., & Kelly, P. J. (1999) · Surface and Coatings Technology · doi:10.1016/s0257-8972(98)00749-x · Cited by 170
Cited by
Chen, R., Li, Q., Yu, X., Chen, L., & Li, H. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00268 · Cited by 1,678
Interfaces and Interphases in All-Solid-State Batteries with Inorganic Solid Electrolytes
Banerjee, A., Wang, X., Fang, C., Wu, E. A., & Meng, Y. S. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00101 · Cited by 1,526
Progress and Perspective of Ceramic/Polymer Composite Solid Electrolytes for Lithium Batteries
Li, S., Zhang, S., Shen, L., Liu, Q., Ma, J., Lv, W., He, Y., & Yang, Q. (2020) · Advanced Science · doi:10.1002/advs.201903088 · Cited by 825
Self-citationConfronting the Challenges in Lithium Anodes for Lithium Metal Batteries
Wang, Q., Liu, B., Shen, Y., Wu, J., Zhao, Z., Zhong, C., & Hu, W. (2021) · Advanced Science · doi:10.1002/advs.202101111 · Cited by 531
Reducing the thickness of solid-state electrolyte membranes for high-energy lithium batteries
Wu, J., Yuan, L., Zhang, W., Li, Z., Xie, X., & Huang, Y. (2021) · Energy & Environmental Science · doi:10.1039/d0ee02241a · Cited by 425
Metadata
- Authors
- Hao, X., Zhao, Q., Su, S., Zhang, S., Ma, J., Shen, L., Yu, Q., Zhao, L., Liu, Y., Kang, F., & He, Y.
- Venue
- Advanced Energy Materials
- Publisher
- Wiley
- Published
- 2019-07-31
- Volume
- 9
- Issue
- 34
- ISSN
- 1614-6832 (ISSN-L)
- 1614-6840
- OpenAlex
- W2965627413
- Cited by
- 272
- References
- 35
- FWCI
- 11.10
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.