The DOI matches its Crossref record; 40 of the 40 references it cites were found in a registry or an index.
Mechanochemical Synthesis: A Tool to Tune Cation Site Disorder and Ionic Transport Properties of Li3MCl6 (M = Y, Er) Superionic Conductors
Open accessAbstract
The lithium‐conducting, rare‐earth halides, Li 3 MX 6 (M = Y, Er; X = Cl, Br), have garnered significantly rising interest recently, as they have been reported to have oxidative stability and high ionic conductivities. However, while a multitude of materials exhibit a superionic conductivity close to 1 mS cm−1, the exact design strategies to further improve the ionic transport properties have not been established yet. Here, the influence of the employed synthesis method of mechanochemical milling, compared to subsequent crystallization routines as well as classic solid‐state syntheses on the structure and resulting transport behavior of Li 3 ErCl 6 and Li 3 YCl 6 are explored. Using a combination of X‐ray diffraction, pair distribution function analysis, density functional theory, and impedance spectroscopy, insights into the average and local structural features that influence the underlying transport are provided. The existence of a cation defect within the structure in which Er/Y are disordered to a new position strongly benefits the transport properties. A synthetically tuned, increasing degree of this disordering leads to a decreasing activation energy and increasing ionic conductivity. This work sheds light on the possible synthesis strategies and helps to systematically understand and further improve the properties of this class of materials.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Generalized Gradient Approximation Made Simple
Perdew, J. P., Burke, K., & Ernzerhof, M. (1996) · Physical Review Letters · doi:10.1103/physrevlett.77.3865 · Cited by 215,824
Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set
Kresse, G., & Furthmüller, J. (1996) · Physical Review B · doi:10.1103/physrevb.54.11169 · Cited by 123,652
Projector augmented-wave method
Blöchl, P. E. (1994) · Physical Review B · doi:10.1103/physrevb.50.17953 · Cited by 92,732
Shannon, R. D. (1976) · Acta Crystallographica Section A · doi:10.1107/s0567739476001551 · Cited by 66,145
A lithium superionic conductor
Kamaya, N., Homma, K., Yamakawa, Y., Hirayama, M., Kanno, R., Yonemura, M., Kamiyama, T., Kato, Y., Hama, S., Kawamoto, K., et al. (2011) · Nature Materials · doi:10.1038/nmat3066 · Cited by 4,978
Lithium battery chemistries enabled by solid-state electrolytes
Manthiram, A., Yu, X., & Wang, S. (2017) · Nature Reviews Materials · doi:10.1038/natrevmats.2016.103 · Cited by 4,689
Python Materials Genomics (pymatgen): A robust, open-source python library for materials analysis
Ong, S. P., Richards, W. D., Jain, A., Hautier, G., Kocher, M., Cholia, S., Gunter, D., Chevrier, V. L., Persson, K. A., & Ceder, G. (2013) · Computational Materials Science · doi:10.1016/j.commatsci.2012.10.028 · Cited by 4,534
A solid future for battery development
Janek, J., & Zeier, W. G. (2016) · Nature Energy · doi:10.1038/nenergy.2016.141 · Cited by 3,979
Self-citationThe analysis of electrode impedances complicated by the presence of a constant phase element
Brug, G. J., van den Eeden, A. L. G., Sluyters-Rehbach, M., & Sluyters, J. H. (1984) · Journal of Electroanalytical Chemistry and Interfacial Electrochemistry · doi:10.1016/s0022-0728(84)80324-1 · Cited by 3,718
High-power all-solid-state batteries using sulfide superionic conductors
Kato, Y., Hori, S., Saito, T., Suzuki, K., Hirayama, M., Mitsui, A., Yonemura, M., Iba, H., & Kanno, R. (2016) · Nature Energy · doi:10.1038/nenergy.2016.30 · Cited by 3,517
Fast Lithium Ion Conduction in Garnet‐Type Li7La3Zr2O12
Murugan, R., Thangadurai, V., & Weppner, W. (2007) · Angewandte Chemie International Edition · doi:10.1002/anie.200701144 · Cited by 3,250
Bachman, J. C., Muy, S., Grimaud, A., Chang, H.-H., Pour, N., Lux, S. F., Paschos, O., Maglia, F., Lupart, S., Lamp, P., et al. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00563 · Cited by 2,537
Self-citationCoelho, A. A. (2018) · Journal of Applied Crystallography · doi:10.1107/s1600576718000183 · Cited by 2,510
Zhu, Y., He, X., & Mo, Y. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b07517 · Cited by 1,936
Interface Stability in Solid-State Batteries
Richards, W. D., Miara, L. J., Wang, Y., Kim, J. C., & Ceder, G. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b04082 · Cited by 1,652
Design principles for solid-state lithium superionic conductors
Wang, Y., Richards, W. D., Ong, S. P., Miara, L. J., Kim, J. C., Mo, Y., & Ceder, G. (2015) · Nature Materials · doi:10.1038/nmat4369 · Cited by 1,485
Juhás, P., Davis, T., Farrow, C. L., & Billinge, S. J. L. (2013) · Journal of Applied Crystallography · doi:10.1107/s0021889813005190 · Cited by 1,341
Asano, T., Sakai, A., Ouchi, S., Sakaida, M., Miyazaki, A., & Hasegawa, S. (2018) · Advanced Materials · doi:10.1002/adma.201803075 · Cited by 1,275
Sulfide Solid Electrolyte with Favorable Mechanical Property for All-Solid-State Lithium Battery
Sakuda, A., Hayashi, A., & Tatsumisago, M. (2013) · Scientific Reports · doi:10.1038/srep02261 · Cited by 1,051
Koerver, R., Aygün, I., Leichtweiß, T., Dietrich, C., Zhang, W., Binder, J. O., Hartmann, P., Zeier, W. G., & Janek, J. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b00931 · Cited by 1,020
Self-citationAir-stable Li3InCl6 electrolyte with high voltage compatibility for all-solid-state batteries
Li, X., Liang, J., Luo, J., Norouzi Banis, M., Wang, C., Li, W., Deng, S., Yu, C., Zhao, F., Hu, Y., et al. (2019) · Energy & Environmental Science · doi:10.1039/c9ee02311a · Cited by 753
Ong, S. P., Mo, Y., Richards, W. D., Miara, L., Lee, H. S., & Ceder, G. (2013) · Energy Environ. Sci. · doi:10.1039/c2ee23355j · Cited by 710
Adeli, P., Bazak, D. J., Park, K. H., Kochetkov, I. R., Huq, A., Goward, G. R., & Nazar, L. F. (2019) · Angewandte Chemie International Edition · doi:10.1002/anie.201814222 · Cited by 671
Wang, S., Bai, Q., Nolan, A. M., Liu, Y., Gong, S., Sun, Q., & Mo, Y. (2019) · Angewandte Chemie International Edition · doi:10.1002/anie.201901938 · Cited by 654
Kraft, M. A., Ohno, S., Zinkevich, T., Koerver, R., Culver, S. P., Fuchs, T., Senyshyn, A., Indris, S., Morgan, B. J., & Zeier, W. G. (2018) · Journal of the American Chemical Society · doi:10.1021/jacs.8b10282 · Cited by 509
Self-citationPreparation of Li 2 S–P 2 S 5 Amorphous Solid Electrolytes by Mechanical Milling
Hayashi, A., Hama, S., Morimoto, H., Tatsumisago, M., & Minami, T. (2001) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.2001.tb00685.x · Cited by 478
Juhás, P., Farrow, C. L., Yang, X., Knox, K. R., & Billinge, S. J. L. (2015) · Acta Crystallographica Section A Foundations and Advances · doi:10.1107/s2053273315014473 · Cited by 369
Dietrich, C., Weber, D. A., Sedlmaier, S. J., Indris, S., Culver, S. P., Walter, D., Janek, J., & Zeier, W. G. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta06067j · Cited by 338
Self-citationRettenwander, D., Redhammer, G. J., Preishuber‐Pflügl, F., Cheng, L., Miara, L. J., Wagner, R., Welzl, A., Suard, E., Doeff, M. M., Wilkening, M., et al. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b00579 · Cited by 322
Kuhn, A., Gerbig, O., Zhu, C., Falkenberg, F., Maier, J., & Lotsch, B. V. (2014) · Phys. Chem. Chem. Phys. · doi:10.1039/c4cp02046d · Cited by 316
Recent progress of glass and glass-ceramics as solid electrolytes for lithium secondary batteries
Minami, T., Hayashi, A., & Tatsumisago, M. (2006) · Solid State Ionics · doi:10.1016/j.ssi.2006.07.017 · Cited by 303
Structure and ionic conductivity in lithium garnets
Cussen, E. J. (2010) · Journal of Materials Chemistry · doi:10.1039/b925553b · Cited by 264
High-Throughput Screening of Solid-State Li-Ion Conductors Using Lattice-Dynamics Descriptors
Muy, S., Voss, J., Schlem, R., Koerver, R., Sedlmaier, S. J., Maglia, F., Lamp, P., Zeier, W. G., & Shao-Horn, Y. (2019) · iScience · doi:10.1016/j.isci.2019.05.036 · Cited by 262
Self-citationDewald, G. F., Ohno, S., Kraft, M. A., Koerver, R., Till, P., Vargas-Barbosa, N. M., Janek, J., & Zeier, W. G. (2019) · Chemistry of Materials · doi:10.1021/acs.chemmater.9b01550 · Cited by 236
Self-citationAll-Solid-State Batteries with Thick Electrode Configurations
Kato, Y., Shiotani, S., Morita, K., Suzuki, K., Hirayama, M., & Kanno, R. (2018) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.7b02880 · Cited by 234
Structural Insights and 3D Diffusion Pathways within the Lithium Superionic Conductor Li10GeP2S12
Weber, D. A., Senyshyn, A., Weldert, K. S., Wenzel, S., Zhang, W., Kaiser, R., Berendts, S., Janek, J., & Zeier, W. G. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b02424 · Cited by 215
Self-citationCulver, S. P., Koerver, R., Krauskopf, T., & Zeier, W. G. (2018) · Chemistry of Materials · doi:10.1021/acs.chemmater.8b01293 · Cited by 171
Self-citationBottleneck of Diffusion and Inductive Effects in Li10Ge1–xSnxP2S12
Krauskopf, T., Culver, S. P., & Zeier, W. G. (2018) · Chemistry of Materials · doi:10.1021/acs.chemmater.8b00266 · Cited by 154
Self-citationGhidiu, M., Ruhl, J., Culver, S. P., & Zeier, W. G. (2019) · Journal of Materials Chemistry A · doi:10.1039/c9ta04772g · Cited by 130
Self-citationInfluence of Anion Charge on Li Ion Diffusion in a New Solid-State Electrolyte, Li3LaI6
Xu, Z., Chen, X., Liu, K., Chen, R., Zeng, X., & Zhu, H. (2019) · Chemistry of Materials · doi:10.1021/acs.chemmater.9b02075 · Cited by 113
Cited by
Physicochemical Concepts of the Lithium Metal Anode in Solid-State Batteries
Krauskopf, T., Richter, F. H., Zeier, W. G., & Janek, J. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00431 · Cited by 892
Self-citationProgress and perspectives on halide lithium conductors for all-solid-state lithium batteries
Li, X., Liang, J., Yang, X., Adair, K. R., Wang, C., Zhao, F., & Sun, X. (2020) · Energy & Environmental Science · doi:10.1039/c9ee03828k · Cited by 755
Site-Occupation-Tuned Superionic LixScCl3+xHalide Solid Electrolytes for All-Solid-State Batteries
Liang, J., Li, X., Wang, S., Adair, K. R., Li, W., Zhao, Y., Wang, C., Hu, Y., Zhang, L., Zhao, S., et al. (2020) · Journal of the American Chemical Society · doi:10.1021/jacs.0c00134 · Cited by 567
Wang, C., Liang, J., Zhao, Y., Zheng, M., Li, X., & Sun, X. (2021) · Energy & Environmental Science · doi:10.1039/d1ee00551k · Cited by 489
A cost-effective and humidity-tolerant chloride solid electrolyte for lithium batteries
Wang, K., Ren, Q., Gu, Z., Duan, C., Wang, J., Zhu, F., Fu, Y., Hao, J., Zhu, J., He, L., et al. (2021) · Nature Communications · doi:10.1038/s41467-021-24697-2 · Cited by 483
Metadata
- Authors
- Schlem, R., Muy, S., Prinz, N., Banik, A., Shao‐Horn, Y., Zobel, M., & Zeier, W. G.
- Venue
- Advanced Energy Materials
- Publisher
- Wiley
- Published
- 2019-12-17
- Volume
- 10
- Issue
- 6
- ISSN
- 1614-6832 (ISSN-L)
- 1614-6840
- OpenAlex
- W2996124024
- Cited by
- 362
- References
- 40
- FWCI
- 9.87
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.