The DOI matches its Crossref record; 14 of the 14 references it cites were found in a registry or an index.
Process monitoring and diagnosis by multiblock PLS methods
Abstract
Schemes for monitoring the operating performance of large continuous processes using multivariate statistical projection methods such as principal component analysis (PCA) and projection to latent structures (PLS) are extended to situations where the processes can be naturally blocked into subsections. The multiblock projection methods allow one to establish monitoring charts for the individual process subsections as well as for the entire process. When a special event or fault occurs in a subsection of the process, these multiblock methods can generally detect the event earlier and reveal the subsection within which the event has occurred. More detailed diagnostic methods based on interrogating the underlying PCA/PLS models are also developed. These methods show those process variables which are the main contributors to any deviations that have occurred, thereby allowing one to diagnose the cause of the event more easily. These ideas are demonstrated using detailed simulation studies on a multisection tubular reactor for the production of low‐density polyethylene.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Partial least-squares regression: a tutorial
Geladi, P., & Kowalski, B. R. (1986) · Analytica Chimica Acta · doi:10.1016/0003-2670(86)80028-9 · Cited by 6,992
Introduction to Multivariate Statistical Analysis.
Madow, W. G., & Anderson, T. W. (1959) · The American Mathematical Monthly · doi:10.2307/2308777 · Cited by 3,878
A User's Guide to Principal Components
Leigh, S., & Jackson, J. E. (1993) · Technometrics · doi:10.2307/1269292 · Cited by 3,332
Cross-Validatory Estimation of the Number of Components in Factor and Principal Components Models
Wold, S. (1978) · Technometrics · doi:10.1080/00401706.1978.10489693 · Cited by 2,601
Wold, S., Ruhe, A., Wold, H., & Dunn, III (1984) · SIAM Journal on Scientific and Statistical Computing · doi:10.1137/0905052 · Cited by 2,529
A Use's Guide to Principal Components
Jackson, J. E. (1991) · Wiley Series in Probability and Statistics · doi:10.1002/0471725331 · Cited by 2,516
Höskuldsson, A. (1988) · Journal of Chemometrics · doi:10.1002/cem.1180020306 · Cited by 1,881
Multivariate SPC Charts for Monitoring Batch Processes
Nomikos, P., & MacGregor, J. F. (1995) · Technometrics · doi:10.1080/00401706.1995.10485888 · Cited by 1,422
Self-citationSoft modelling: The Basic Design and Some Extensions
Wold, H. (1982) · Medical Entomology and Zoology · Cited by 1,314
Multivariate statistical monitoring of process operating performance
Kresta, J. V., Macgregor, J. F., & Marlin, T. E. (1991) · The Canadian Journal of Chemical Engineering · doi:10.1002/cjce.5450690105 · Cited by 989
Self-citation
Cited by
A review of process fault detection and diagnosis
Venkatasubramanian, V., Rengaswamy, R., Yin, K., & Kavuri, S. N. (2003) · Computers & Chemical Engineering · doi:10.1016/s0098-1354(02)00160-6 · Cited by 2,723
A review of process fault detection and diagnosis
Venkatasubramanian, V., Rengaswamy, R., Kavuri, S. N., & Yin, K. (2003) · Computers & Chemical Engineering · doi:10.1016/s0098-1354(02)00162-x · Cited by 1,859
Statistical process monitoring: basics and beyond
Joe Qin, S. (2003) · Journal of Chemometrics · doi:10.1002/cem.800 · Cited by 1,582
Monitoring batch processes using multiway principal component analysis
Nomikos, P., & MacGregor, J. F. (1994) · AIChE Journal · doi:10.1002/aic.690400809 · Cited by 1,483
Self-citationSurvey on data-driven industrial process monitoring and diagnosis
Qin, S. J. (2012) · Annual Reviews in Control · doi:10.1016/j.arcontrol.2012.09.004 · Cited by 1,470
Multivariate SPC Charts for Monitoring Batch Processes
Nomikos, P., & MacGregor, J. F. (1995) · Technometrics · doi:10.1080/00401706.1995.10485888 · Cited by 1,422
Self-citationStatistical process control of multivariate processes
MacGregor, J. F., & Kourti, T. (1995) · Control Engineering Practice · doi:10.1016/0967-0661(95)00014-l · Cited by 1,270
Self-citationReview of Recent Research on Data-Based Process Monitoring
Ge, Z., Song, Z., & Gao, F. (2013) · Industrial & Engineering Chemistry Research · doi:10.1021/ie302069q · Cited by 967
The process chemometrics approach to process monitoring and fault detection
Wise, B. M., & Gallagher, N. B. (1996) · Journal of Process Control · doi:10.1016/0959-1524(96)00009-1 · Cited by 852
Multiscale PCA with application to multivariate statistical process monitoring
Bakshi, B. R. (1998) · AIChE Journal · doi:10.1002/aic.690440712 · Cited by 839
Process analysis, monitoring and diagnosis, using multivariate projection methods
Kourti, T. (1995) · Chemometrics and Intelligent Laboratory Systems · doi:10.1016/0169-7439(94)00079-x · Cited by 780
Statistical process monitoring with independent component analysis
Lee, J.-M., Yoo, C., & Lee, I.-B. (2004) · Journal of Process Control · doi:10.1016/j.jprocont.2003.09.004 · Cited by 746
Multi-way partial least squares in monitoring batch processes
Nomikos, P., & MacGregor, J. F. (1995) · Chemometrics and Intelligent Laboratory Systems · doi:10.1016/0169-7439(95)00043-7 · Cited by 737
Self-citationIdentification of faulty sensors using principal component analysis
Dunia, R., Qin, S. J., Edgar, T. F., & McAvoy, T. J. (1996) · AIChE Journal · doi:10.1002/aic.690421011 · Cited by 526
Deep convolutional neural network model based chemical process fault diagnosis
Wu, H., & Zhao, J. (2018) · Computers & Chemical Engineering · doi:10.1016/j.compchemeng.2018.04.009 · Cited by 517
Kano, M., & Nakagawa, Y. (2008) · Computers & Chemical Engineering · doi:10.1016/j.compchemeng.2007.07.005 · Cited by 508
Generalized contribution plots in multivariate statistical process monitoring
Westerhuis, J. A., Gurden, S. P., & Smilde, A. K. (2000) · Chemometrics and Intelligent Laboratory Systems · doi:10.1016/s0169-7439(00)00062-9 · Cited by 507
Multimode process monitoring with Bayesian inference‐based finite Gaussian mixture models
Yu, J., & Qin, S. J. (2008) · AIChE Journal · doi:10.1002/aic.11515 · Cited by 494
Total projection to latent structures for process monitoring
Zhou, D., Li, G., & Qin, S. J. (2010) · AIChE Journal · doi:10.1002/aic.11977 · Cited by 472
Monitoring independent components for fault detection
Kano, M., Tanaka, S., Hasebe, S., Hashimoto, I., & Ohno, H. (2003) · AIChE Journal · doi:10.1002/aic.690490414 · Cited by 410
Tidriri, K., Chatti, N., Verron, S., & Tiplica, T. (2016) · Annual Reviews in Control · doi:10.1016/j.arcontrol.2016.09.008 · Cited by 397
Geometric properties of partial least squares for process monitoring
Li, G., Qin, S. J., & Zhou, D. (2010) · Automatica · doi:10.1016/j.automatica.2009.10.030 · Cited by 368
Jiang, Q., Yan, X., & Huang, B. (2016) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2015.2466557 · Cited by 361
Analysis, monitoring and fault diagnosis of batch processes using multiblock and multiway PLS
Kourti, T., Nomikos, P., & MacGregor, J. F. (1995) · Journal of Process Control · doi:10.1016/0959-1524(95)00019-m · Cited by 340
Self-citationMultivariate process monitoring and fault diagnosis by multi-scale PCA
Misra, M., Yue, H. H., Qin, S. J., & Ling, C. (2002) · Computers & Chemical Engineering · doi:10.1016/s0098-1354(02)00093-5 · Cited by 325
Shang, C., Yang, F., Gao, X., Huang, X., Suykens, J. A. K., & Huang, D. (2015) · AIChE Journal · doi:10.1002/aic.14888 · Cited by 300
Review and Perspectives of Data-Driven Distributed Monitoring for Industrial Plant-Wide Processes
Jiang, Q., Yan, X., & Huang, B. (2019) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.9b02391 · Cited by 297
Recent trends on hybrid modeling for Industry 4.0
Sansana, J., Joswiak, M. N., Castillo, I., Wang, Z., Rendall, R., Chiang, L. H., & Reis, M. S. (2021) · Computers & Chemical Engineering · doi:10.1016/j.compchemeng.2021.107365 · Cited by 296
Reis, M., & Gins, G. (2017) · Processes · doi:10.3390/pr5030035 · Cited by 294
Zhu, J., Ge, Z., & Song, Z. (2017) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2017.2658732 · Cited by 289
Qin, S. J., & Zheng, Y. (2013) · AIChE Journal · doi:10.1002/aic.13959 · Cited by 263
Statistical monitoring of multivariable dynamic processes with state‐space models
Negiz, A., & Çlinar, A. (1997) · AIChE Journal · doi:10.1002/aic.690430810 · Cited by 259
Statistical monitoring of multistage, multiphase batch processes
(2002) · IEEE Control Systems · doi:10.1109/mcs.2002.1035216 · Cited by 254
Self-Validating Inferential Sensors with Application to Air Emission Monitoring
Qin, S. J., Yue, H., & Dunia, R. (1997) · Industrial & Engineering Chemistry Research · doi:10.1021/ie960615y · Cited by 111
Metadata
- Authors
- MacGregor, J. F., Jaeckle, C., Kiparissides, C., & Koutoudi, M.
- Venue
- AIChE Journal
- Publisher
- Wiley
- Published
- 1994-05
- Volume
- 40
- Issue
- 5
- Pages
- 826-838
- ISSN
- 0001-1541 (ISSN-L)
- 1547-5905
- OpenAlex
- W2015436473
- Cited by
- 773
- References
- 14
- FWCI
- 37.79
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.