The DOI matches its Crossref record; 34 of the 34 references it cites were found in a registry or an index.
A Layered Hybrid Perovskite Solar‐Cell Absorber with Enhanced Moisture Stability
Abstract
Two‐dimensional hybrid perovskites are used as absorbers in solar cells. Our first‐generation devices containing (PEA)2(MA)2[Pb 3 I 10] (1; PEA=C 6 H 5(CH 2)2 NH 3+, MA=CH 3 NH 3+) show an open‐circuit voltage of 1.18 V and a power conversion efficiency of 4.73 %. The layered structure allows for high‐quality films to be deposited through spin coating and high‐temperature annealing is not required for device fabrication. The 3D perovskite (MA)[PbI 3] (2) has recently been identified as a promising absorber for solar cells. However, its instability to moisture requires anhydrous processing and operating conditions. Films of 1 are more moisture resistant than films of 2 and devices containing 1 can be fabricated under ambient humidity levels. The larger bandgap of the 2D structure is also suitable as the higher bandgap absorber in a dual‐absorber tandem device. Compared to 2, the layered perovskite structure may offer greater tunability at the molecular level for material optimization.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells
Kojima, A., Teshima, K., Shirai, Y., & Miyasaka, T. (2009) · Journal of the American Chemical Society · doi:10.1021/ja809598r · Cited by 23,090
Detailed Balance Limit of Efficiency of p-n Junction Solar Cells
Shockley, W., & Queisser, H. J. (1961) · Journal of Applied Physics · doi:10.1063/1.1736034 · Cited by 13,258
Efficient Hybrid Solar Cells Based on Meso-Superstructured Organometal Halide Perovskites
Lee, M. M., Teuscher, J., Miyasaka, T., Murakami, T. N., & Snaith, H. J. (2012) · Science · doi:10.1126/science.1228604 · Cited by 10,687
Stranks, S. D., Eperon, G. E., Grancini, G., Menelaou, C., Alcocer, M. J. P., Leijtens, T., Herz, L. M., Petrozza, A., & Snaith, H. J. (2013) · Science · doi:10.1126/science.1243982 · Cited by 10,413
Sequential deposition as a route to high-performance perovskite-sensitized solar cells
Burschka, J., Pellet, N., Moon, S.-J., Humphry-Baker, R., Gao, P., Nazeeruddin, M. K., & Grätzel, M. (2013) · Nature · doi:10.1038/nature12340 · Cited by 9,547
Efficient planar heterojunction perovskite solar cells by vapour deposition
Liu, M., Johnston, M. B., & Snaith, H. J. (2013) · Nature · doi:10.1038/nature12509 · Cited by 7,976
Long-Range Balanced Electron- and Hole-Transport Lengths in Organic-Inorganic CH 3 NH 3 PbI 3
Xing, G., Mathews, N., Sun, S., Lim, S. S., Lam, Y. M., Grätzel, M., Mhaisalkar, S., & Sum, T. C. (2013) · Science · doi:10.1126/science.1243167 · Cited by 6,909
Stoumpos, C. C., Malliakas, C. D., & Kanatzidis, M. G. (2013) · Inorganic Chemistry · doi:10.1021/ic401215x · Cited by 5,416
Noh, J. H., Im, S. H., Heo, J. H., Mandal, T. N., & Seok, S. I. (2013) · Nano Letters · doi:10.1021/nl400349b · Cited by 4,829
6.5% efficient perovskite quantum-dot-sensitized solar cell
Im, J.-H., Lee, C.-R., Lee, J.-W., Park, S.-W., & Park, N.-G. (2011) · Nanoscale · doi:10.1039/c1nr10867k · Cited by 3,173
Cited by
Items 101–171 of 171
Methylammonium Bismuth Iodide as a Lead‐Free, Stable Hybrid Organic–Inorganic Solar Absorber
Hoye, R. L. Z., Brandt, R. E., Osherov, A., Stevanović, V., Stranks, S. D., Wilson, M. W. B., Kim, H., Akey, A. J., Perkins, J. D., Kurchin, R. C., et al. (2016) · Chemistry – A European Journal · doi:10.1002/chem.201505055 · Cited by 368
Bandgap Engineering of Lead‐Halide Perovskite‐Type Ferroelectrics
Ye, H., Liao, W., Hu, C., Zhang, Y., You, Y., Mao, J., Li, P., & Xiong, R. (2016) · Advanced Materials · doi:10.1002/adma.201505224 · Cited by 367
Selective growth of layered perovskites for stable and efficient photovoltaics
Cho, K. T., Grancini, G., Lee, Y., Oveisi, E., Ryu, J., Almora, O., Tschumi, M., Schouwink, P. A., Seo, G., Heo, S., et al. (2018) · Energy & Environmental Science · doi:10.1039/c7ee03513f · Cited by 367
Confinement Effects in Low-Dimensional Lead Iodide Perovskite Hybrids
Kamminga, M. E., Fang, H.-H., Filip, M. R., Giustino, F., Baas, J., Blake, G. R., Loi, M. A., & Palstra, T. T. M. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b00809 · Cited by 366
Passarelli, J. V., Fairfield, D. J., Sather, N. A., Hendricks, M. P., Sai, H., Stern, C. L., & Stupp, S. I. (2018) · Journal of the American Chemical Society · doi:10.1021/jacs.8b03659 · Cited by 365
Structural and thermodynamic limits of layer thickness in 2D halide perovskites
Soe, C. M. M., Nagabhushana, G. P., Shivaramaiah, R., Tsai, H., Nie, W., Blancon, J.-C., Melkonyan, F., Cao, D. H., Traoré, B., Pedesseau, L., et al. (2019) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1811006115 · Cited by 363
Chen, Y., Sun, Y., Peng, J., Zhang, W., Su, X., Zheng, K., Pullerits, T., & Liang, Z. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700162 · Cited by 358
Recent Advances in Improving the Stability of Perovskite Solar Cells
Tiep, N. H., Ku, Z., & Fan, H. J. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201501420 · Cited by 356
Bai, Y., Chen, H., Xiao, S., Xue, Q., Zhang, T., Zhu, Z., Li, Q., Hu, C., Yang, Y., Hu, Z., et al. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201505215 · Cited by 351
Enhancing Stability of Perovskite Solar Cells to Moisture by the Facile Hydrophobic Passivation
Hwang, I., Jeong, I., Lee, J., Ko, M. J., & Yong, K. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b04490 · Cited by 351
Interfaces in Perovskite Solar Cells
Fakharuddin, A., Schmidt‐Mende, L., Garcia‐Belmonte, G., Jose, R., & Mora‐Sero, I. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700623 · Cited by 349
Miah, M. H., Khandaker, M. U., Rahman, M. B., Nur-E-Alam, M., & Islam, M. A. (2024) · RSC Advances · doi:10.1039/d4ra01640h · Cited by 349
Structural and Functional Diversity in Lead‐Free Halide Perovskite Materials
Ning, W., & Gao, F. (2019) · Advanced Materials · doi:10.1002/adma.201900326 · Cited by 348
Kim, H., Lee, S., Lee, D. Y., Paik, M. J., Na, H., Lee, J., & Seok, S. I. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201902740 · Cited by 346
Hybrid Perovskite/Perovskite Heterojunction Solar Cells
Hu, Y., Schlipf, J., Wussler, M., Petrus, M. L., Jaegermann, W., Bein, T., Müller-Buschbaum, P., & Docampo, P. (2016) · ACS Nano · doi:10.1021/acsnano.6b01535 · Cited by 345
Soe, C. M. M., Nie, W., Stoumpos, C. C., Tsai, H., Blancon, J., Liu, F., Even, J., Marks, T. J., Mohite, A. D., & Kanatzidis, M. G. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201700979 · Cited by 341
Encapsulation for long-term stability enhancement of perovskite solar cells
Matteocci, F., Cinà, L., Lamanna, E., Cacovich, S., Divitini, G., Midgley, P. A., Ducati, C., & Di Carlo, A. (2016) · Nano Energy · doi:10.1016/j.nanoen.2016.09.041 · Cited by 340
Cho, Y., Soufiani, A. M., Yun, J. S., Kim, J., Lee, D. S., Seidel, J., Deng, X., Green, M. A., Huang, S., & Ho‐Baillie, A. W. Y. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201703392 · Cited by 334
Dimensionality engineering of hybrid halide perovskite light absorbers
Gao, P., Bin Mohd Yusoff, A. R., & Nazeeruddin, M. K. (2018) · Nature Communications · doi:10.1038/s41467-018-07382-9 · Cited by 333
Perovskite Solar Cells: Beyond Methylammonium Lead Iodide
Boix, P. P., Agarwala, S., Koh, T. M., Mathews, N., & Mhaisalkar, S. G. (2015) · The Journal of Physical Chemistry Letters · doi:10.1021/jz502547f · Cited by 324
Rong, Y., Hou, X., Hu, Y., Mei, A., Liu, L., Wang, P., & Han, H. (2017) · Nature Communications · doi:10.1038/ncomms14555 · Cited by 324
Emerging Indoor Photovoltaic Technologies for Sustainable Internet of Things
Pecunia, V., Occhipinti, L. G., & Hoye, R. L. Z. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202100698 · Cited by 322
Jiang, F., Yang, D., Jiang, Y., Liu, T., Zhao, X., Ming, Y., Luo, B., Qin, F., Fan, J., Han, H., et al. (2018) · Journal of the American Chemical Society · doi:10.1021/jacs.7b10739 · Cited by 317
Over 21% Efficiency Stable 2D Perovskite Solar Cells
Shao, M., Bie, T., Yang, L., Gao, Y., Jin, X., He, F., Zheng, N., Yu, Y., & Zhang, X. (2022) · Advanced Materials · doi:10.1002/adma.202107211 · Cited by 316
A Direct Bandgap Copper–Antimony Halide Perovskite
Vargas, B., Ramos, E., Pérez-Gutiérrez, E., Alonso, J. C., & Solis-Ibarra, D. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b04119 · Cited by 314
Self-citationHu, J., Oswald, I. W. H., Stuard, S. J., Nahid, M. M., Zhou, N., Williams, O. F., Guo, Z., Yan, L., Hu, H., Chen, Z., et al. (2019) · Nature Communications · doi:10.1038/s41467-019-08980-x · Cited by 308
Photodetectors Based on Organic–Inorganic Hybrid Lead Halide Perovskites
Zhou, J., & Huang, J. (2018) · Advanced Science · doi:10.1002/advs.201700256 · Cited by 307
Li, J., Wang, J., Ma, J., Shen, H., Li, L., Duan, X., & Li, D. (2019) · Nature Communications · doi:10.1038/s41467-019-08768-z · Cited by 307
Metal Halide Perovskites in Quantum Dot Solar Cells: Progress and Prospects
Yuan, J., Hazarika, A., Zhao, Q., Ling, X., Moot, T., Ma, W., & Luther, J. M. (2020) · Joule · doi:10.1016/j.joule.2020.04.006 · Cited by 307
Synthesis, properties, and optical applications of low-dimensional perovskites
Zhang, Y., Liu, J., Wang, Z., Xue, Y., Ou, Q., Polavarapu, L., Zheng, J., Qi, X., & Bao, Q. (2016) · Chemical Communications · doi:10.1039/c6cc06425f · Cited by 303
Molecular cation and low-dimensional perovskite surface passivation in perovskite solar cells
Teale, S., Degani, M., Chen, B., Sargent, E. H., & Grancini, G. (2024) · Nature Energy · doi:10.1038/s41560-024-01529-3 · Cited by 302
Efficient Lead-Free Solar Cells Based on Hollow {en}MASnI3 Perovskites
Ke, W., Stoumpos, C. C., Spanopoulos, I., Mao, L., Chen, M., Wasielewski, M. R., & Kanatzidis, M. G. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b09018 · Cited by 301
Aligned and Graded Type‐II Ruddlesden–Popper Perovskite Films for Efficient Solar Cells
Qing, J., Liu, X., Li, M., Liu, F., Yuan, Z., Tiukalova, E., Yan, Z., Duchamp, M., Chen, S., Wang, Y., et al. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201800185 · Cited by 300
Unveiling the operation mechanism of layered perovskite solar cells
Lin, Y., Fang, Y., Zhao, J., Shao, Y., Stuard, S. J., Nahid, M. M., Ade, H., Wang, Q., Shield, J. E., Zhou, N., et al. (2019) · Nature Communications · doi:10.1038/s41467-019-08958-9 · Cited by 298
Phase Transition Control for High Performance Ruddlesden–Popper Perovskite Solar Cells
Zhang, X., Munir, R., Xu, Z., Liu, Y., Tsai, H., Nie, W., Li, J., Niu, T., Smilgies, D., Kanatzidis, M. G., et al. (2018) · Advanced Materials · doi:10.1002/adma.201707166 · Cited by 294
Zhou, Q., Liang, L., Hu, J., Cao, B., Yang, L., Wu, T., Li, X., Zhang, B., & Gao, P. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201802595 · Cited by 294
A Review of Inorganic Hole Transport Materials for Perovskite Solar Cells
Kung, P., Li, M., Lin, P., Chiang, Y., Chan, C., Guo, T., & Chen, P. (2018) · Advanced Materials Interfaces · doi:10.1002/admi.201800882 · Cited by 293
Lead‐Free Hybrid Perovskite Absorbers for Viable Application: Can We Eat the Cake and Have It too?
Liang, L., & Gao, P. (2018) · Advanced Science · doi:10.1002/advs.201700331 · Cited by 291
Rational chemical doping of metal halide perovskites
Zhang, X., Li, L., Sun, Z., & Luo, J. (2019) · Chemical Society Reviews · doi:10.1039/c8cs00563j · Cited by 290
Li, L., Sun, Z., Wang, P., Hu, W., Wang, S., Ji, C., Hong, M., & Luo, J. (2017) · Angewandte Chemie International Edition · doi:10.1002/anie.201705836 · Cited by 288
Two‐Dimensional Halide Perovskites in Solar Cells: 2D or not 2D?
Ortiz‐Cervantes, C., Carmona‐Monroy, P., & Solis‐Ibarra, D. (2019) · ChemSusChem · doi:10.1002/cssc.201802992 · Cited by 287
Self-citationQiu, L., Ono, L. K., & Qi, Y. (2018) · Materials Today Energy · doi:10.1016/j.mtener.2017.09.008 · Cited by 286
Shi, J., Gao, Y., Gao, X., Zhang, Y., Zhang, J., Jing, X., & Shao, M. (2019) · Advanced Materials · doi:10.1002/adma.201901673 · Cited by 286
Yuan, H., Debroye, E., Janssen, K., Naiki, H., Steuwe, C., Lu, G., Moris, M., Orgiu, E., Uji-i, H., De Schryver, F., et al. (2016) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.5b02828 · Cited by 282
Stoumpos, C. C., Mao, L., Malliakas, C. D., & Kanatzidis, M. G. (2017) · Inorganic Chemistry · doi:10.1021/acs.inorgchem.6b02764 · Cited by 282
Lanzetta, L., Marin-Beloqui, J. M., Sanchez-Molina, I., Ding, D., & Haque, S. A. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.7b00414 · Cited by 281
Jacobsson, T. J., Schwan, L. J., Ottosson, M., Hagfeldt, A., & Edvinsson, T. (2015) · Inorganic Chemistry · doi:10.1021/acs.inorgchem.5b01481 · Cited by 280
Nanostructuring Mixed‐Dimensional Perovskites: A Route Toward Tunable, Efficient Photovoltaics
Koh, T. M., Shanmugam, V., Schlipf, J., Oesinghaus, L., Müller‐Buschbaum, P., Ramakrishnan, N., Swamy, V., Mathews, N., Boix, P. P., & Mhaisalkar, S. G. (2016) · Advanced Materials · doi:10.1002/adma.201506141 · Cited by 271
An Overview for Zero‐Dimensional Broadband Emissive Metal‐Halide Single Crystals
Zhou, L., Liao, J., & Kuang, D. (2021) · Advanced Optical Materials · doi:10.1002/adom.202100544 · Cited by 270
Ke, W., Mao, L., Stoumpos, C. C., Hoffman, J., Spanopoulos, I., Mohite, A. D., & Kanatzidis, M. G. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201803384 · Cited by 269
Zheng, H., Liu, G., Zhu, L., Ye, J., Zhang, X., Alsaedi, A., Hayat, T., Pan, X., & Dai, S. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201800051 · Cited by 265
Solution-Processed Transparent Electrodes for Emerging Thin-Film Solar Cells
Zhang, Y., Ng, S.-W., Lu, X., & Zheng, Z. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00483 · Cited by 264
From bulk to molecularly thin hybrid perovskites
Leng, K., Fu, W., Liu, Y., Chhowalla, M., & Loh, K. P. (2020) · Nature Reviews Materials · doi:10.1038/s41578-020-0185-1 · Cited by 264
Cao, J., Liu, Y.-M., Jing, X., Yin, J., Li, J., Xu, B., Tan, Y.-Z., & Zheng, N. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b06493 · Cited by 263
Wu, C., Zou, Y., Wu, T., Ban, M., Pecunia, V., Han, Y., Liu, Q., Song, T., Duhm, S., & Sun, B. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201700338 · Cited by 263
Stability Issues on Perovskite Solar Cells
Zhao, X., & Park, N.-G. (2015) · Photonics · doi:10.3390/photonics2041139 · Cited by 262
Emerging Semitransparent Solar Cells: Materials and Device Design
Tai, Q., & Yan, F. (2017) · Advanced Materials · doi:10.1002/adma.201700192 · Cited by 262
A Review: Thermal Stability of Methylammonium Lead Halide Based Perovskite Solar Cells
Ava, T. T., Al Mamun, A., Marsillac, S., & Namkoong, G. (2019) · Applied Sciences · doi:10.3390/app9010188 · Cited by 260
2D/3D perovskite hybrids as moisture-tolerant and efficient light absorbers for solar cells
Ma, C., Leng, C., Ji, Y., Wei, X., Sun, K., Tang, L., Yang, J., Luo, W., Li, C., Deng, Y., et al. (2016) · Nanoscale · doi:10.1039/c6nr04741f · Cited by 259
Meyer, E., Mutukwa, D., Zingwe, N., & Taziwa, R. (2018) · Metals · doi:10.3390/met8090667 · Cited by 259
Luminescent perovskites: recent advances in theory and experiments
Song, Z., Zhao, J., & Liu, Q. (2019) · Inorganic Chemistry Frontiers · doi:10.1039/c9qi00777f · Cited by 259
Pearson, A. J., Eperon, G. E., Hopkinson, P. E., Habisreutinger, S. N., Wang, J. T., Snaith, H. J., & Greenham, N. C. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201600014 · Cited by 256
Vertically Oriented 2D Layered Perovskite Solar Cells with Enhanced Efficiency and Good Stability
Zhang, X., Wu, G., Yang, S., Fu, W., Zhang, Z., Chen, C., Liu, W., Yan, J., Yang, W., & Chen, H. (2017) · Small · doi:10.1002/smll.201700611 · Cited by 256
Solution‐Processable Perovskite Solar Cells toward Commercialization: Progress and Challenges
Wang, P., Wu, Y., Cai, B., Ma, Q., Zheng, X., & Zhang, W. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201807661 · Cited by 255
Li, X., Hoffman, J., Ke, W., Chen, M., Tsai, H., Nie, W., Mohite, A. D., Kepenekian, M., Katan, C., Even, J., et al. (2018) · Journal of the American Chemical Society · doi:10.1021/jacs.8b07712 · Cited by 253
Advanced Organic–Inorganic Hybrid Materials for Optoelectronic Applications
Zhou, K., Qi, B., Liu, Z., Wang, X., Sun, Y., & Zhang, L. (2024) · Advanced Functional Materials · doi:10.1002/adfm.202411671 · Cited by 228
High-performance gas sensors based on a thiocyanate ion-doped organometal halide perovskite
Zhuang, Y., Yuan, W., Qian, L., Chen, S., & Shi, G. (2017) · Physical Chemistry Chemical Physics · doi:10.1039/c7cp01646h · Cited by 109
Kosasih, F. U., & Ducati, C. (2018) · Nano Energy · doi:10.1016/j.nanoen.2018.02.055 · Cited by 86
Mundt, L. E., & Schelhas, L. T. (2020) · Advanced Energy Materials · doi:10.1002/aenm.201903074 · Cited by 58
Progress and Prospects of Solution-Processed Two-Dimensional Semiconductor Nanocrystals
Porotnikov, D., & Zamkov, M. (2020) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.0c06868 · Cited by 41
Imaging Ultrafast Charge Transfer at Low-Dimensional Lead Halide Perovskite Heterostructures
Faini, F., Asensio, Y., Visentin, F., Olano-Vegas, L., Hörmann, M., Hueso, L. E., Cerullo, G., Camargo, F. V. A., Martín-García, B., & Grancini, G. (2025) · ACS Energy Letters · doi:10.1021/acsenergylett.4c02786 · Cited by 12
Metadata
- Authors
- Smith, I. C., Hoke, E. T., Solis‐Ibarra, D., McGehee, M. D., & Karunadasa, H. I.
- Venue
- Angewandte Chemie International Edition
- Publisher
- Wiley
- Published
- 2014-09-04
- Volume
- 53
- Issue
- 42
- Pages
- 11232-11235
- ISSN
- 1433-7851 (ISSN-L)
- 1521-3773
- OpenAlex
- W2152034665
- Cited by
- 2,011
- References
- 34
- FWCI
- 58.01
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.