The DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.
Mechanical properties of poly(ε‐caprolactone) and poly(lactic acid) blends
Abstract
The aim of this work was to better understand the performance of binary blends of biodegradable aliphatic polyesters to overcome some limitations of the pure polymers (e.g., brittleness, low stiffness, and low toughness). Binary blends of poly(ε‐caprolactone) (PCL) and poly(lactic acid) (PLA) were prepared by melt blending (in a twin‐screw extruder) followed by injection molding. The compositions ranged from pure biodegradable polymers to 25 wt % increments. Morphological characterization was performed with scanning electron microscopy and differential scanning calorimetry. The initial modulus, stress and strain at yield, strain at break, and impact toughness of the biodegradable polymer blends were investigated. The properties were described by models assuming different interfacial behaviors (e.g., good adhesion and no adhesion between the dissimilar materials). The results indicated that PCL behaved as a polymeric plasticizer to PLA and improved the flexibility and ductility of the blends, giving the blends higher impact toughness. The strain at break was effectively improved by the addition of PCL to PLA, and this was followed by a decrease in the stress at break. The two biodegradable polymers were proved to be immiscible but nevertheless showed some degree of adhesion between the two phases. This was also quantified by the mechanical property prediction models, which, in conjunction with material property characterization, allowed unambiguous detection of the interfacial behavior of the polymer blends. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Large-scale production, properties and commercial applications of polylactic acid polymers
Lunt, J. (1998) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(97)00148-1 · Cited by 1,366
Biopolymers: overview of several properties and consequences on their applications
Van de Velde, K., & Kiekens, P. (2002) · Polymer Testing · doi:10.1016/s0142-9418(01)00107-6 · Cited by 887
Preparation and characterization of biodegradable PLA polymeric blends
Chen, C.-C., Chueh, J.-Y., Tseng, H., Huang, H.-M., & Lee, S.-Y. (2003) · Biomaterials · doi:10.1016/s0142-9612(02)00466-0 · Cited by 583
Structure and mechanical properties of poly(?,?-lactic acid)/poly(ɛ-caprolactone) blends
Broz, M. (2003) · Biomaterials · doi:10.1016/s0142-9612(03)00314-4 · Cited by 388
Hu, Y., Hu, Y. S., Topolkaraev, V., Hiltner, A., & Baer, E. (2003) · Polymer · doi:10.1016/s0032-3861(03)00615-3 · Cited by 258
Mechanical behaviour of biodegradable agricultural films under real field conditions
Briassoulis, D. (2006) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2005.09.016 · Cited by 211
Cited by
Poly (lactic acid) blends: Processing, properties and applications
Nofar, M., Sacligil, D., Carreau, P. J., Kamal, M. R., & Heuzey, M.-C. (2019) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2018.12.002 · Cited by 780
Polylactic acid blends: The future of green, light and tough
Hamad, K., Kaseem, M., Ayyoob, M., Joo, J., & Deri, F. (2018) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2018.07.001 · Cited by 640
Navarro-Baena, I., Sessini, V., Dominici, F., Torre, L., Kenny, J. M., & Peponi, L. (2016) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2016.03.037 · Cited by 303
Processing of nanostructured polymers and advanced polymeric based nanocomposites
Peponi, L., Puglia, D., Torre, L., Valentini, L., & Kenny, J. M. (2014) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2014.08.002 · Cited by 257
Phase Structure, Compatibility, and Toughness of PLA/PCL Blends: A Review
Fortelny, I., Ujcic, A., Fambri, L., & Slouf, M. (2019) · Frontiers in Materials · doi:10.3389/fmats.2019.00206 · Cited by 238
Composites of Wood and Biodegradable Thermoplastics: A Review
Chan, C. M., Vandi, L.-J., Pratt, S., Halley, P., Richardson, D., Werker, A., & Laycock, B. (2018) · Polymer Reviews · doi:10.1080/15583724.2017.1380039 · Cited by 207
Melt electrowriting of PLA, PCL, and composite PLA/PCL scaffolds for tissue engineering application
Shahverdi, M., Seifi, S., Akbari, A., Mohammadi, K., Shamloo, A., & Movahhedy, M. R. (2022) · Scientific Reports · doi:10.1038/s41598-022-24275-6 · Cited by 154
Effect of the molecular weight on the crystallinity of PCL-b-PLLA di-block copolymers
Peponi, L., Navarro-Baena, I., Báez, J. E., Kenny, J. M., & Marcos-Fernández, A. (2012) · Polymer · doi:10.1016/j.polymer.2012.07.066 · Cited by 109
Phase morphology, physical properties, and biodegradation behavior of novel PLA/PHBHHx blends
Zhao, Q., Wang, S., Kong, M., Geng, W., Li, R. K. Y., Song, C., & Kong, D. (2012) · Journal of Biomedical Materials Research Part B: Applied Biomaterials · doi:10.1002/jbm.b.31915 · Cited by 49
Mechanical properties of PLA/PCL blends crosslinked by electron beam and TAIC additive
Malinowski, R. (2016) · Chemical Physics Letters · doi:10.1016/j.cplett.2016.09.022 · Cited by 34
Fernández‐Tena, A., Otaegi, I., Irusta, L., Sebastián, V., Guerrica‐Echevarria, G., Müller, A. J., & Aranburu, N. (2023) · Macromolecular Materials and Engineering · doi:10.1002/mame.202300213 · Cited by 34
Ivanov, E., Kotsilkova, R., Georgiev, V., Batakliev, T., & Angelov, V. (2025) · Journal of Manufacturing and Materials Processing · doi:10.3390/jmmp9020035 · Cited by 15
Batakliev, T., Georgiev, V., Ivanov, E., Angelov, V., & Kotsilkova, R. (2025) · Processes · doi:10.3390/pr13051328 · Cited by 6
Vala, N. S., Bavaliya, K. J., Raj, M., & Raj, L. (2025) · Polymer-Plastics Technology and Materials · doi:10.1080/25740881.2025.2560913 · Cited by 4
Metadata
- Authors
- Simões, C. L., Viana, J. C., & Cunha, A. M.
- Venue
- Journal of Applied Polymer Science
- Publisher
- Wiley
- Published
- 2008-12-29
- Volume
- 112
- Issue
- 1
- Pages
- 345-352
- ISSN
- 0021-8995 (ISSN-L)
- 1097-4628
- OpenAlex
- W2005132790
- Cited by
- 218
- References
- 6
- FWCI
- 1.99
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.