The DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.
Melt processed PLA/PCL blends: Effect of processing method on phase structure, morphology, and mechanical properties
Abstract
Poly(lactic acid) (PLA)‐rich poly(lactic acid)/poly(ε‐caprolactone) (PLA/PCL) blends were melt‐blended at different compositions. The compositions such as 90/10 and 80/20 were obtained using three different blending methods and processed by injection molding and hot pressing. All blends were immiscible. The crystallinity of PLA increased slightly in the presence of poly(ε‐caprolactone) (PCL), and the PCL exhibited fractionated crystallization in the presence of PLA. Injection molded specimens, compared with hot pressed specimens, presented much smaller PCL particles regardless of the blending method used. Some interfacial adhesion was observed in all cases. The stiffness of PLA/PCL blends decreased as the PCL content was increased and was independent of processing. Injection molded specimens showed ductile behavior and broke at elongation values close to 140%, while the elongation at break of the hot pressed specimens was clearly lower, most likely due to the larger size of the PCL particles. Although the impact strength of the blends remained low, it improved by approximately 200% with 30% PCL and by 350% with 40% PCL. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci.2015,132, 42641.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Poly‐Lactic Acid: Production, Applications, Nanocomposites, and Release Studies
Jamshidian, M., Tehrany, E. A., Imran, M., Jacquot, M., & Desobry, S. (2010) · Comprehensive Reviews in Food Science and Food Safety · doi:10.1111/j.1541-4337.2010.00126.x · Cited by 1,557
Carrasco, F., Pagès, P., Gámez-Pérez, J., Santana, O. O., & Maspoch, M. L. (2010) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2009.11.045 · Cited by 738
Anderson, K., Schreck, K., & Hillmyer, M. (2008) · Polymer Reviews · doi:10.1080/15583720701834216 · Cited by 600
Structure and mechanical properties of poly(?,?-lactic acid)/poly(ɛ-caprolactone) blends
Broz, M. (2003) · Biomaterials · doi:10.1016/s0142-9612(03)00314-4 · Cited by 388
Fernández, J., Etxeberria, A., & Sarasua, J.-R. (2012) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2012.01.003 · Cited by 217
Bai, H., Huang, C., Xiu, H., Gao, Y., Zhang, Q., & Fu, Q. (2013) · Polymer · doi:10.1016/j.polymer.2013.07.051 · Cited by 153
Cited by
Poly (lactic acid) blends: Processing, properties and applications
Nofar, M., Sacligil, D., Carreau, P. J., Kamal, M. R., & Heuzey, M.-C. (2019) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2018.12.002 · Cited by 780
Polylactic acid blends: The future of green, light and tough
Hamad, K., Kaseem, M., Ayyoob, M., Joo, J., & Deri, F. (2018) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2018.07.001 · Cited by 640
Narancic, T., Verstichel, S., Reddy Chaganti, S., Morales-Gamez, L., Kenny, S. T., De Wilde, B., Babu Padamati, R., & O’Connor, K. E. (2018) · Environmental Science & Technology · doi:10.1021/acs.est.8b02963 · Cited by 632
An overview of biodegradable packaging in food industry
Shaikh, S., Yaqoob, M., & Aggarwal, P. (2021) · Current Research in Food Science · doi:10.1016/j.crfs.2021.07.005 · Cited by 561
Super tough poly(lactic acid) blends: a comprehensive review
Zhao, X., Hu, H., Wang, X., Yu, X., Zhou, W., & Peng, S. (2020) · RSC Advances · doi:10.1039/d0ra01801e · Cited by 465
Phase Structure, Compatibility, and Toughness of PLA/PCL Blends: A Review
Fortelny, I., Ujcic, A., Fambri, L., & Slouf, M. (2019) · Frontiers in Materials · doi:10.3389/fmats.2019.00206 · Cited by 238
Ostafinska, A., Fortelny, I., Nevoralova, M., Hodan, J., Kredatusova, J., & Slouf, M. (2015) · RSC Advances · doi:10.1039/c5ra21178f · Cited by 176
Gigante, V., Canesi, I., Cinelli, P., Coltelli, M. B., & Lazzeri, A. (2019) · European Polymer Journal · doi:10.1016/j.eurpolymj.2019.03.015 · Cited by 156
Strong synergistic effects in PLA/PCL blends: impact of PLA matrix viscosity
Ostafinska, A., Fortelný, I., Hodan, J., Krejčíková, S., Nevoralová, M., Kredatusová, J., Kruliš, Z., Kotek, J., & Šlouf, M. (2017) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2017.01.015 · Cited by 118
PCL-Based Shape Memory Polymer Semi-IPNs: The Role of Miscibility in Tuning the Degradation Rate
Pfau, M. R., McKinzey, K. G., Roth, A. A., & Grunlan, M. A. (2020) · Biomacromolecules · doi:10.1021/acs.biomac.0c00454 · Cited by 58
Xiang, S., Feng, L., Bian, X., Zhang, B., Sun, B., Liu, Y., Li, G., & Chen, X. (2019) · Polymers for Advanced Technologies · doi:10.1002/pat.4530 · Cited by 42
Mechanical properties of PLA/PCL blends crosslinked by electron beam and TAIC additive
Malinowski, R. (2016) · Chemical Physics Letters · doi:10.1016/j.cplett.2016.09.022 · Cited by 34
Fernández‐Tena, A., Otaegi, I., Irusta, L., Sebastián, V., Guerrica‐Echevarria, G., Müller, A. J., & Aranburu, N. (2023) · Macromolecular Materials and Engineering · doi:10.1002/mame.202300213 · Cited by 34
Development and characterization of PLA/PCL blend filaments and 3D printed scaffolds
Eryildiz, M., Karakus, A., & Altan Eksi, M. (2025) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-024-10247-6 · Cited by 27
Eryildiz, M., Karakus, A., Demirci, M., Altintas Kadirhan, O., & Eksi Altan, M. (2025) · Polymers for Advanced Technologies · doi:10.1002/pat.70133 · Cited by 25
Kelnar, I., Kaprálková, L., Krejčíková, S., Dybal, J., Vyroubalová, M., & Abdel-Mohsen, A. M. (2023) · Materials · doi:10.3390/ma16031087 · Cited by 7
Batakliev, T., Georgiev, V., Ivanov, E., Angelov, V., & Kotsilkova, R. (2025) · Processes · doi:10.3390/pr13051328 · Cited by 6
Karpova, S. G., Olkhov, A. A., Varyan, I. A., Khan, O. I., Botin, A. A., Naletova, A. V., Popov, A. A., & Iordanskii, A. L. (2024) · doi:10.20944/preprints202404.0063.v1 · Cited by 4
Metadata
- Authors
- Urquijo, J., Guerrica‐Echevarría, G., & Eguiazábal, J. I.
- Venue
- Journal of Applied Polymer Science
- Publisher
- Wiley
- Published
- 2015-07-08
- Volume
- 132
- Issue
- 41
- ISSN
- 0021-8995 (ISSN-L)
- 1097-4628
- OpenAlex
- W1522051920
- Cited by
- 176
- References
- 6
- FWCI
- 6.77
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.