Material extrusion‐based additive manufacturing of polypropylene: A review on how to improve dimensional inaccuracy and warpage

Conduction of Heat in Solids

Carslaw, H. S., & Jaeger, J. C. (1947) · International Linear Collider · Cited by 19,877

Conduction of heat in solids

Tranter, C. J. (1959) · Journal of the Mechanics and Physics of Solids · doi:10.1016/0022-5096(59)90029-8 · Cited by 18,388

Polymers for 3D Printing and Customized Additive Manufacturing

Ligon, S. C., Liska, R., Stampfl, J., Gurr, M., & Mülhaupt, R. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00074 · Cited by 3,741

Additive Manufacturing Technologies: 3D Printing, Rapid Prototyping, and Direct Digital Manufacturing

Gibson, I., Rosen, D., & Stucker, B. (2015) · doi:10.1007/978-1-4939-2113-3 · Cited by 3,299

Anisotropic material properties of fused deposition modeling ABS

Ahn, S., Montero, M., Odell, D., Roundy, S., & Wright, P. K. (2002) · Rapid Prototyping Journal · doi:10.1108/13552540210441166 · Cited by 2,382

Fused deposition modeling of novel scaffold architectures for tissue engineering applications

Zein, I., Hutmacher, D. W., Tan, K. C., & Teoh, S. H. (2002) · Biomaterials · doi:10.1016/s0142-9612(01)00232-0 · Cited by 1,874

Mechanical properties and cell cultural response of polycaprolactone scaffolds designed and fabricated via fused deposition modeling

Hutmacher, D. W., Schantz, T., Zein, I., Ng, K. W., Teoh, S. H., & Tan, K. C. (2001) · Journal of Biomedical Materials Research · doi:10.1002/1097-4636(200105)55:2<203::aid-jbm1007>3.0.co;2-7 · Cited by 1,409

A review on additive manufacturing of polymer-fiber composites

Parandoush, P., & Lin, D. (2017) · Composite Structures · doi:10.1016/j.compstruct.2017.08.088 · Cited by 1,270

Adhesion of polymers

Awaja, F., Gilbert, M., Kelly, G., Fox, B., & Pigram, P. J. (2009) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2009.04.007 · Cited by 928

Fused deposition modeling with polypropylene

Carneiro, O. S., Silva, A. F., & Gomes, R. (2015) · Materials & Design · doi:10.1016/j.matdes.2015.06.053 · Cited by 851

A review of melt extrusion additive manufacturing processes: II. Materials, dimensional accuracy, and surface roughness

Turner, B. N., & Gold, S. A. (2015) · Rapid Prototyping Journal · doi:10.1108/rpj-02-2013-0017 · Cited by 770

Experimental characterization and micrography of 3D printed PLA and PLA reinforced with short carbon fibers

Ferreira, R. T. L., Amatte, I. C., Dutra, T. A., & Bürger, D. (2017) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2017.05.013 · Cited by 764

Additive manufacturing of biomaterials

Bose, S., Ke, D., Sahasrabudhe, H., & Bandyopadhyay, A. (2018) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.08.003 · Cited by 738

β-MODIFICATION OF ISOTACTIC POLYPROPYLENE: PREPARATION, STRUCTURE, PROCESSING, PROPERTIES, AND APPLICATION

Varga, J. (2002) · Journal of Macromolecular Science, Part B · doi:10.1081/mb-120013089 · Cited by 729

Short fiber reinforced composites for fused deposition modeling

Zhong, W., Li, F., Zhang, Z., Song, L., & Li, Z. (2001) · Materials Science and Engineering: A · doi:10.1016/s0921-5093(00)01810-4 · Cited by 721

Additive Manufacturing of Metallic and Ceramic Components by the Material Extrusion of Highly-Filled Polymers: A Review and Future Perspectives

Gonzalez-Gutierrez, J., Cano, S., Schuschnigg, S., Kukla, C., Sapkota, J., & Holzer, C. (2018) · Materials · doi:10.3390/ma11050840 · Cited by 713

3D printing of CNT- and graphene-based conductive polymer nanocomposites by fused deposition modeling

Gnanasekaran, K., Heijmans, T., van Bennekom, S., Woldhuis, H., Wijnia, S., de With, G., & Friedrich, H. (2017) · Applied Materials Today · doi:10.1016/j.apmt.2017.04.003 · Cited by 594

The importance of carbon fiber to polymer additive manufacturing

Love, L. J., Kunc, V., Rios, O., Duty, C. E., Elliott, A. M., Post, B. K., Smith, R. J., & Blue, C. A. (2014) · Journal of Materials Research · doi:10.1557/jmr.2014.212 · Cited by 493

Development of controlled porosity polymer-ceramic composite scaffolds via fused deposition modeling

Kalita, S. J., Bose, S., Hosick, H. L., & Bandyopadhyay, A. (2003) · Materials Science and Engineering: C · doi:10.1016/s0928-4931(03)00052-3 · Cited by 488

Configurable 3D-Printed millifluidic and microfluidic ‘lab on a chip’ reactionware devices

Kitson, P. J., Rosnes, M. H., Sans, V., Dragone, V., & Cronin, L. (2012) · Lab on a Chip · doi:10.1039/c2lc40761b · Cited by 484

A review on composite materials and process parameters optimisation for the fused deposition modelling process

Mohan, N., Senthil, P., Vinodh, S., & Jayanth, N. (2017) · Virtual and Physical Prototyping · doi:10.1080/17452759.2016.1274490 · Cited by 457

What makes a material printable? A viscoelastic model for extrusion-based 3D printing of polymers

Duty, C., Ajinjeru, C., Kishore, V., Compton, B. G., Hmeidat, N. S., Chen, X., Liu, P., Hassen, A. A., Lindahl, J. M., & Kunc, V. (2018) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2018.08.008 · Cited by 367

A model research for prototype warp deformation in the FDM process

Wang, T.-M., Xi, J.-T., & Jin, Y. (2007) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-006-0556-9 · Cited by 331

Handbook of Polypropylene and Polypropylene Composites

(1999) · Cellular Polymers · doi:10.1177/026248939901800505 · Cited by 330

Infrared thermography of welding zones produced by polymer extrusion additive manufacturing

Seppala, J. E., & Migler, K. B. (2016) · Additive manufacturing · doi:10.1016/j.addma.2016.06.007 · Cited by 322

Welding of 3D-printed carbon nanotube–polymer composites by locally induced microwave heating

Sweeney, C. B., Lackey, B. A., Pospisil, M. J., Achee, T. C., Hicks, V. K., Moran, A. G., Teipel, B. R., Saed, M. A., & Green, M. J. (2017) · Science Advances · doi:10.1126/sciadv.1700262 · Cited by 313

Recent developments in 3D printable composite materials

Kalsoom, U., Nesterenko, P. N., & Paull, B. (2016) · RSC Advances · doi:10.1039/c6ra11334f · Cited by 294

Estimation of filament temperature and adhesion development in fused deposition techniques

Costa, S. F., Duarte, F. M., & Covas, J. A. (2017) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2017.02.026 · Cited by 293

Infrared preheating to improve interlayer strength of big area additive manufacturing (BAAM) components

Kishore, V., Ajinjeru, C., Nycz, A., Post, B., Lindahl, J., Kunc, V., & Duty, C. (2017) · Additive Manufacturing · doi:10.1016/j.addma.2016.11.008 · Cited by 292

Handbook of Polypropylene and Polypropylene Composites, Revised and Expanded

(2003) · CRC Press eBooks · doi:10.1201/9780203911808 · Cited by 287

Effect of the printing bed temperature on the adhesion of parts produced by fused filament fabrication

Spoerk, M., Gonzalez-Gutierrez, J., Sapkota, J., Schuschnigg, S., & Holzer, C. (2018) · Plastics, Rubber and Composites · doi:10.1080/14658011.2017.1399531 · Cited by 282

3D-Printed Mechanochromic Materials

Peterson, G. I., Larsen, M. B., Ganter, M. A., Storti, D. W., & Boydston, A. J. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/am506745m · Cited by 273

Polymer recycling in an open-source additive manufacturing context: Mechanical issues

Cruz Sanchez, F. A., Boudaoud, H., Hoppe, S., & Camargo, M. (2017) · Additive Manufacturing · doi:10.1016/j.addma.2017.05.013 · Cited by 243

Anisotropic properties of oriented short carbon fibre filled polypropylene parts fabricated by extrusion-based additive manufacturing

Spoerk, M., Savandaiah, C., Arbeiter, F., Traxler, G., Cardon, L., Holzer, C., & Sapkota, J. (2018) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2018.06.018 · Cited by 241

Recycled polypropylene blends as novel 3D printing materials

Zander, N. E., Gillan, M., Burckhard, Z., & Gardea, F. (2019) · Additive Manufacturing · doi:10.1016/j.addma.2018.11.009 · Cited by 239

Scaffold Design and in Vitro Study of Osteochondral Coculture in a Three-Dimensional Porous Polycaprolactone Scaffold Fabricated by Fused Deposition Modeling

Cao, T., Ho, K.-H., & Teoh, S.-H. (2003) · Tissue Engineering · doi:10.1089/10763270360697012 · Cited by 231

Preparation of polypropylene/short glass fiber composite as Fused Deposition Modeling (FDM) filament

Sodeifian, G., Ghaseminejad, S., & Yousefi, A. A. (2019) · Results in Physics · doi:10.1016/j.rinp.2018.11.065 · Cited by 229

Sustainable composite fused deposition modelling filament using recycled pre-consumer polypropylene

Stoof, D., & Pickering, K. (2018) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2017.10.005 · Cited by 228

Parametric optimization of intra‐ and inter‐layer strengths in parts produced by extrusion‐based additive manufacturing of poly(lactic acid)

Spoerk, M., Arbeiter, F., Cajner, H., Sapkota, J., & Holzer, C. (2017) · Journal of Applied Polymer Science · doi:10.1002/app.45401 · Cited by 227

3D printing of versatile reactionware for chemical synthesis

Kitson, P. J., Glatzel, S., Chen, W., Lin, C.-G., Song, Y.-F., & Cronin, L. (2016) · Nature Protocols · doi:10.1038/nprot.2016.041 · Cited by 217

Improvement of quality of 3D printed objects by elimination of microscopic structural defects in fused deposition modeling

Gordeev, E. G., Galushko, A. S., & Ananikov, V. P. (2018) · PLOS ONE · doi:10.1371/journal.pone.0198370 · Cited by 208

Recycled polyethylene terephthalate as a new FFF feedstock material

Zander, N. E., Gillan, M., & Lambeth, R. H. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2018.03.007 · Cited by 207

Thermal analysis of additive manufacturing of large-scale thermoplastic polymer composites

Compton, B. G., Post, B., Duty, C., Love, L. J., & Kunc, V. (2017) · Additive manufacturing · doi:10.1016/j.addma.2017.07.006 · Cited by 206

In-situ monitoring of strain and temperature distributions during fused deposition modeling process

Kousiatza, C., & Karalekas, D. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.02.099 · Cited by 205

Fiber Bragg grating based investigation of residual strains in ABS parts fabricated by fused deposition modeling process

Kantaros, A., & Karalekas, D. (2013) · Materials & Design · doi:10.1016/j.matdes.2013.02.067 · Cited by 201

Warpage of FDM parts: Experimental tests and analytic model

Armillotta, A., Bellotti, M., & Cavallaro, M. (2018) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2017.09.007 · Cited by 193

Effects of processing conditions on short TLCP fiber reinforced FDM parts

Gray, R. W., Baird, D. G., & Helge Bøhn, J. (1998) · Rapid Prototyping Journal · doi:10.1108/13552549810197514 · Cited by 183

Screw extrusion-based additive manufacturing of PEEK

Tseng, J.-W., Liu, C.-Y., Yen, Y.-K., Belkner, J., Bremicker, T., Liu, B. H., Sun, T.-J., & Wang, A.-B. (2018) · Materials & Design · doi:10.1016/j.matdes.2017.11.032 · Cited by 177

Polycaprolactone-based fused deposition modeled mesh for delivery of antibacterial agents to infected wounds

Teo, E. Y., Ong, S.-Y., Khoon Chong, M. S., Zhang, Z., Lu, J., Moochhala, S., Ho, B., & Teoh, S.-H. (2011) · Biomaterials · doi:10.1016/j.biomaterials.2010.08.089 · Cited by 176

Thermal Analysis of Plastics: Theory and Practice

Ehrenstein, G. W., Riedel, G., & Trawiel, P. (2004) · Cited by 175

3D-printed devices for continuous-flow organic chemistry

Dragone, V., Sans, V., Rosnes, M. H., Kitson, P. J., & Cronin, L. (2013) · Beilstein Journal of Organic Chemistry · doi:10.3762/bjoc.9.109 · Cited by 174

Characterizing the Mechanical Properties of Fused Deposition Modelling Natural Fiber Recycled Polypropylene Composites

Milosevic, M., Stoof, D., & Pickering, K. (2017) · Journal of Composites Science · doi:10.3390/jcs1010007 · Cited by 173

Shrinkage and Warpage Optimization of Expanded‐Perlite‐Filled Polypropylene Composites in Extrusion‐Based Additive Manufacturing

Spoerk, M., Sapkota, J., Weingrill, G., Fischinger, T., Arbeiter, F., & Holzer, C. (2017) · Macromolecular Materials and Engineering · doi:10.1002/mame.201700143 · Cited by 169

Extrusion-Based 3D Printing of Microfluidic Devices for Chemical and Biomedical Applications: A Topical Review

Pranzo, D., Larizza, P., Filippini, D., & Percoco, G. (2018) · Micromachines · doi:10.3390/mi9080374 · Cited by 160

Polypropylene Filled With Glass Spheres in Extrusion‐Based Additive Manufacturing: Effect of Filler Size and Printing Chamber Temperature

Spoerk, M., Arbeiter, F. J., Raguž, I., Weingrill, G., Fischinger, T., Traxler, G., Schuschnigg, S., Cardon, L., & Holzer, C. (2018) · Macromolecular Materials and Engineering · doi:10.1002/mame.201800179 · Cited by 149

Residual stress measurement in Fused Deposition Modelling parts

Casavola, C., Cazzato, A., Moramarco, V., & Pappalettera, G. (2017) · Polymer Testing · doi:10.1016/j.polymertesting.2017.01.003 · Cited by 146

Effects of material properties on warpage in fused deposition modeling parts

Fitzharris, E. R., Watanabe, N., Rosen, D. W., & Shofner, M. L. (2017) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-017-1340-8 · Cited by 143

Optimization of mechanical properties of glass‐spheres‐filled polypropylene composites for extrusion‐based additive manufacturing

Spoerk, M., Savandaiah, C., Arbeiter, F. J., Sapkota, J., & Holzer, C. (2017) · Polymer Composites · doi:10.1002/pc.24701 · Cited by 133

Trabecular scaffolds created using micro CT guided fused deposition modeling

Tellis, B. C., Szivek, J. A., Bliss, C. L., Margolis, D. S., Vaidyanathan, R. K., & Calvert, P. (2007) · Materials Science and Engineering C · doi:10.1016/j.msec.2006.11.010 · Cited by 125

Multi-objective optimisation of strength and volumetric shrinkage of FDM parts

Gurrala, P. K., & Regalla, S. P. (2014) · Virtual and Physical Prototyping · doi:10.1080/17452759.2014.898851 · Cited by 125

Optimisation of the Adhesion of Polypropylene-Based Materials during Extrusion-Based Additive Manufacturing

Spoerk, M., González-Gutiérrez, J., Lichal, C., Cajner, H., Berger, G., Schuschnigg, S., Cardon, L., & Holzer, C. (2018) · Polymers · doi:10.3390/polym10050490 · Cited by 123

Effect of fused layer modeling (FLM) processing parameters on impact strength of cellular polypropylene

Wang, L., & Gardner, D. J. (2017) · Polymer · doi:10.1016/j.polymer.2017.02.055 · Cited by 113

Fracture mechanical characterization and lifetime estimation of near-homogeneous components produced by fused filament fabrication

Arbeiter, F. J., Spoerk, M., Wiener, J., Gosch, A., & Pinter, G. (2018) · Polymer Testing · doi:10.1016/j.polymertesting.2018.01.002 · Cited by 105

Experimental analysis of an extrusion system for additive manufacturing based on polymer pellets

Volpato, N., Kretschek, D., Foggiatto, J. A., & Cruz, C. M. G. D. S. (2015) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-015-7300-2 · Cited by 104

An adaptable FEA simulation of material extrusion additive manufacturing heat transfer in 3D

D’Amico, T., & Peterson, A. M. (2018) · Additive manufacturing · doi:10.1016/j.addma.2018.02.021 · Cited by 104

Polyolefins: 50 years after Ziegler and Natta I

Kaminsky, W. (2013) · Advances in polymer science · doi:10.1007/978-3-642-40808-3 · Cited by 104

Thermoplastic composites reinforced with long fiber thermotropic liquid crystalline polymers for fused deposition modeling

Gray, R. W., Baird, D. G., & Bøhn, J. H. (1998) · Polymer Composites · doi:10.1002/pc.10112 · Cited by 94

The extrusion-based additive manufacturing of moisture-cured silicone elastomer with minimal void for pneumatic actuators

Plott, J. S., & Shih, A. J. (2017) · Additive manufacturing · doi:10.1016/j.addma.2017.06.009 · Cited by 93

Polypropylene/Cellulose Composites for Material Extrusion Additive Manufacturing

Kaynak, B., Spoerk, M., Shirole, A., Ziegler, W., & Sapkota, J. (2018) · Macromolecular Materials and Engineering · doi:10.1002/mame.201800037 · Cited by 93

Effect of layer thickness on irreversible thermal expansion and interlayer strength in fused deposition modeling

D’Amico, T., Debaie, A., & Peterson, A. M. (2017) · Rapid Prototyping Journal · doi:10.1108/rpj-05-2016-0077 · Cited by 87

Mechanical Recyclability of Polypropylene Composites Produced by Material Extrusion-Based Additive Manufacturing

Spoerk, M., Arbeiter, F. J., Raguž, I., Holzer, C., & González-Gutiérrez, J. (2019) · Polymers · doi:10.3390/polym11081318 · Cited by 82

Chemical compatibility of fused filament fabrication-based 3-D printed components with solutions commonly used in semiconductor wet processing

Heikkinen, I. T. S., Kauppinen, C., Liu, Z., Asikainen, S., Spoljaric, S., Seppälä, J. V., Savin, H. I., & Pearce, J. M. (2018) · Additive manufacturing · doi:10.1016/j.addma.2018.07.015 · Cited by 77

Investigations for mechanical properties of Hap, PVC and PP based 3D porous structures obtained through biocompatible FDM filaments

Sharma, R. K., Singh, R., Penna, R., & Fraternali, F. (2017) · Composites Part B Engineering · doi:10.1016/j.compositesb.2017.08.021 · Cited by 76

Effect of fused deposition modeling process parameters on the mechanical properties of a filled polypropylene

Wang, L., Sanders, J. E., Gardner, D. J., et al. (2018) · Progress in Additive Manufacturing · doi:10.1007/s40964-018-0053-3 · Cited by 75

Material extrusion of plant biopolymers: Opportunities & challenges for 3D printing

Chaunier, L., Guessasma, S., Belhabib, S., Valle, G. D., Lourdin, D., & Leroy, E. (2018) · Additive manufacturing · doi:10.1016/j.addma.2018.03.016 · Cited by 74

Effect of initial filament moisture content on the microstructure and mechanical performance of ULTEM® 9085 3D printed parts

Zaldivar, R. J., McLouth, T. D., Ferrelli, G. L., Patel, D., Hopkins, A. R., & Witkin, D. B. (2018) · Additive manufacturing · doi:10.1016/j.addma.2018.10.022 · Cited by 74

Additive Manufacturing of Poly(propylene) by Means of Melt Extrusion

Hertle, S., Drexler, M., & Drummer, D. (2016) · Macromolecular Materials and Engineering · doi:10.1002/mame.201600259 · Cited by 73

Additive Manufacturing of Polypropylene: A Screening Design of Experiment Using Laser-Based Powder Bed Fusion

Ituarte, I. F., Wiikinkoski, O., & Jansson, A. (2018) · Polymers · doi:10.3390/polym10121293 · Cited by 59

The recent development and applications of fluidic channels by 3D printing

Zhou, Y. (2017) · Journal of Biomedical Science · doi:10.1186/s12929-017-0384-2 · Cited by 56

Inter-layer bonding characterisation between materials with different degrees of stiffness processed by fused filament fabrication

Khudiakova, A., Arbeiter, F. J., Spoerk, M., Wolfahrt, M., Godec, D., & Pinter, G. (2019) · Additive manufacturing · doi:10.1016/j.addma.2019.05.006 · Cited by 55

Spray-Dried Cellulose Nanofibril-Reinforced Polypropylene Composites for Extrusion-Based Additive Manufacturing: Nonisothermal Crystallization Kinetics and Thermal Expansion

Wang, L., Gramlich, W. M., Gardner, D., Han, Y., & Tajvidi, M. (2018) · Journal of Composites Science · doi:10.3390/jcs2010007 · Cited by 54

Feasibility and Characterization of Common and Exotic Filaments for Use in 3D Printed Terahertz Devices

Squires, A. D., & Lewis, R. A. (2018) · Journal of Infrared Millimeter and Terahertz Waves · doi:10.1007/s10762-018-0498-y · Cited by 54

3D‐Printed Polypropylene Continuous‐Flow Column Reactors: Exploration of Reactor Utility in SNAr Reactions and the Synthesis of Bicyclic and Tetracyclic Heterocycles

Rao, Z. X., Patel, B., Monaco, A., Cao, Z. J., Barniol‐Xicota, M., Pichon, E., Ladlow, M., & Hilton, S. T. (2017) · European Journal of Organic Chemistry · doi:10.1002/ejoc.201701111 · Cited by 52

Shrinkage compensation of holes via shrinkage of interior structure in FDM process

Yaman, U. (2017) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-017-1018-2 · Cited by 49

Bricking: A New Slicing Method to Reduce Warping

Guerrero-de-Mier, A., Escudero, M. D. M. E., & Somonte, M. D. (2015) · Procedia Engineering · doi:10.1016/j.proeng.2015.12.488 · Cited by 44

The Effects of Iron, Silicon, Chromium, and Aluminum Additions on the Physical and Mechanical Properties of Recycled 3D Printing Filaments

Pan, G., Chong, S., Tsai, H., Lu, W., & Yang, T. C. ‐. (2016) · Advances in Polymer Technology · doi:10.1002/adv.21777 · Cited by 44

Filament Materials Screening for FDM 3D Printing by Means of Injection‐Molded Short Rods

Jin, M., Giesa, R., Neuber, C., & Schmidt, H. (2018) · Macromolecular Materials and Engineering · doi:10.1002/mame.201800507 · Cited by 40

A quantitative investigation of distortion of polylactic acid/PLA) part in FDM from the point of interface residual stress

Li, H., Wang, T., Li, Q., Yu, Z., & Wang, N. (2017) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-017-0820-1 · Cited by 37

A specific groove design for individualized healing in a canine partial sternal defect model by a polycaprolactone/hydroxyapatite scaffold coated with bone marrow stromal cells

Xuan, Y., Tang, H., Wu, B., Ding, X., Lu, Z., Li, W. S., & Xu, Z. (2013) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.35012 · Cited by 31

Poly(ether ester) Ionomers as Water-Soluble Polymers for Material Extrusion Additive Manufacturing Processes

Pekkanen, A. M., Zawaski, C. E., Stevenson, A. T., Dickerman, R., Whittington, A. R., Williams, C. B., & Long, T. E. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b01777 · Cited by 30

3D Printing for Chemical Process Laboratories I: Materials and Connection Principles

Gelhausen, M. G., Feuerbach, T., Schubert, A., et al. (2018) · Chemical Engineering & Technology · doi:10.1002/ceat.201700294 · Cited by 25

Abbreviations of polymer names and guidelines for abbreviating polymer names (IUPAC Recommendations 2014)

He, J., Chen, J., Hellwich, K., Heß, M., Horie, K., Jones, R. G., Kahovec, J., Kitayama, T., Kratochvı́l, P., Meille, S. V., et al. (2014) · Pure and Applied Chemistry · doi:10.1515/pac-2012-1203 · Cited by 20

Compatibility of 3-D printed devices in cleanroom environments for semiconductor processing

Pasanen, T. P., von Gastrow, G., Heikkinen, I. T. S., Vähänissi, V., Savin, H. I., & Pearce, J. M. (2018) · Materials Science in Semiconductor Processing · doi:10.1016/j.mssp.2018.08.027 · Cited by 20

3D/4D Printing of Polymers: Fused Deposition Modelling (FDM), Selective Laser Sintering (SLS), and Stereolithography (SLA)

Kafle, A., Luis, E., Silwal, R., Pan, H. M., Shrestha, P. L., & Bastola, A. K. (2021) · Polymers · doi:10.3390/polym13183101 · Cited by 587

Fused filament fabrication of polymer materials: A review of interlayer bond

Gao, X., Qi, S., Kuang, X., Su, Y., Li, J., & Wang, D. (2021) · Additive Manufacturing · doi:10.1016/j.addma.2020.101658 · Cited by 418

Extrusion-based additive manufacturing technologies: State of the art and future perspectives

Altıparmak, S. C., Yardley, V. A., Shi, Z., & Lin, J. (2022) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2022.09.032 · Cited by 320

A review of design and fabrication strategies for thermoplastic lightweight thin-walled stiffened shells and lattice structures utilizing fused-filament fabrication (FFF)

Ahmed, R., Dola, I. S., Ahmed, S., Rahman, M. M., Shanto, T. A., & Taylor, R. (2026) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-026-18078-6 · Cited by 6