The DOI matches its Crossref record; 24 of the 24 references it cites were found in a registry or an index.
Freeform inkjet printing of cellular structures with bifurcations
Abstract
Organ printing offers a great potential for the freeform layer‐by‐layer fabrication of three‐dimensional (3D) living organs using cellular spheroids or bioinks as building blocks. Vascularization is often identified as a main technological barrier for building 3D organs. As such, the fabrication of 3D biological vascular trees is of great importance for the overall feasibility of the envisioned organ printing approach. In this study, vascular‐like cellular structures are fabricated using a liquid support‐based inkjet printing approach, which utilizes a calcium chloride solution as both a cross‐linking agent and support material. This solution enables the freeform printing of spanning and overhang features by providing a buoyant force. A heuristic approach is implemented to compensate for the axially‐varying deformation of horizontal tubular structures to achieve a uniform diameter along their axial directions. Vascular‐like structures with both horizontal and vertical bifurcations have been successfully printed from sodium alginate only as well as mouse fibroblast‐based alginate bioinks. The post‐printing fibroblast cell viability of printed cellular tubes was found to be above 90% even after a 24 h incubation, considering the control effect. Biotechnol. Bioeng. 2015;112: 1047–1055. © 2014 Wiley Periodicals, Inc.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Alginate hydrogels as synthetic extracellular matrix materials
Rowley, J. A., Madlambayan, G., & Mooney, D. J. (1999) · Biomaterials · doi:10.1016/s0142-9612(98)00107-0 · Cited by 2,342
3D bioprinting of vascularized, heterogeneous cell-laden tissue constructs
Kolesky, D. B., Truby, R. L., Gladman, A. S., Busbee, T. A., Homan, K. A., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201305506 · Cited by 2,102
Rapid casting of patterned vascular networks for perfusable engineered three-dimensional tissues
Miller, J. S., Stevens, K. R., Yang, M. T., Baker, B. M., Nguyen, D.-H. T., Cohen, D. M., Toro, E., Chen, A. A., Galie, P. A., Yu, X., et al. (2012) · Nature Materials · doi:10.1038/nmat3357 · Cited by 1,917
Scaffold-free vascular tissue engineering using bioprinting
Norotte, C., Marga, F. S., Niklason, L. E., & Forgacs, G. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2009.06.034 · Cited by 1,339
Organ printing: Tissue spheroids as building blocks
Mironov, V., Visconti, R. P., Kasyanov, V., Forgacs, G., Drake, C. J., & Markwald, R. R. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2008.12.084 · Cited by 1,238
3D Bioprinting of heterogeneous aortic valve conduits with alginate/gelatin hydrogels
Duan, B., Hockaday, L. A., Kang, K. H., & Butcher, J. T. (2013) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.34420 · Cited by 1,002
Degradation of Partially Oxidized Alginate and Its Potential Application for Tissue Engineering
Bouhadir, K. H., Lee, K. Y., Alsberg, E., Damm, K. L., Anderson, K. W., & Mooney, D. J. (2001) · Biotechnology Progress · doi:10.1021/bp010070p · Cited by 672
Bioprinting Toward Organ Fabrication: Challenges and Future Trends
Ozbolat, I. T., & Yu, Y. (2013) · IEEE Transactions on Biomedical Engineering · doi:10.1109/tbme.2013.2243912 · Cited by 666
Xu, T., Zhao, W., Zhu, J.-M., Albanna, M. Z., Yoo, J. J., & Atala, A. (2013) · Biomaterials · doi:10.1016/j.biomaterials.2012.09.035 · Cited by 607
Evaluation of hydrogels for bio‐printing applications
Murphy, S. V., Skardal, A., & Atala, A. (2013) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.34326 · Cited by 543
Skardal, A., Zhang, J., & Prestwich, G. D. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.04.045 · Cited by 461
Organ Shortage Crisis: Problems and Possible Solutions
Abouna, G. M. (2008) · Transplantation Proceedings · doi:10.1016/j.transproceed.2007.11.067 · Cited by 397
Scaffold‐free inkjet printing of three‐dimensional zigzag cellular tubes
Xu, C., Chai, W., Huang, Y., & Markwald, R. R. (2012) · Biotechnology and Bioengineering · doi:10.1002/bit.24591 · Cited by 357
Self-citationLaser-based direct-write techniques for cell printing
Schiele, N. R., Corr, D. T., Huang, Y., Raof, N. A., Xie, Y., & Chrisey, D. B. (2010) · Biofabrication · doi:10.1088/1758-5082/2/3/032001 · Cited by 334
Self-citationRegulating Bone Formation via Controlled Scaffold Degradation
Alsberg, E., Kong, H. J., Hirano, Y., Smith, M. K., Albeiruti, A., & Mooney, D. J. (2003) · Journal of Dental Research · doi:10.1177/154405910308201111 · Cited by 327
Nishiyama, Y., Nakamura, M., Henmi, C., Yamaguchi, K., Mochizuki, S., Nakagawa, H., & Takiura, K. (2009) · Journal of Biomechanical Engineering · doi:10.1115/1.3002759 · Cited by 322
Microdrop Printing of Hydrogel Bioinks into 3D Tissue‐Like Geometries
Pataky, K., Braschler, T., Negro, A., Renaud, P., Lutolf, M. P., & Brugger, J. (2012) · Advanced Materials · doi:10.1002/adma.201102800 · Cited by 267
Drop-on-demand printing of cells and materials for designer tissue constructs
Boland, T., Tao, X., Damon, B. J., Manley, B., Kesari, P., Jalota, S., & Bhaduri, S. (2007) · Materials Science and Engineering: C · doi:10.1016/j.msec.2006.05.047 · Cited by 220
Study of Droplet Formation Process during Drop-on-Demand Inkjetting of Living Cell-Laden Bioink
Xu, C., Zhang, M., Huang, Y., Ogale, A., Fu, J., & Markwald, R. R. (2014) · Langmuir · doi:10.1021/la501430x · Cited by 184
Self-citationLaser-assisted printing of alginate long tubes and annular constructs
Yan, J., Huang, Y. H., & Chrisey, D. B. (2012) · Biofabrication · doi:10.1088/1758-5082/5/1/015002 · Cited by 130
Self-citationCell and organ printing turns 15: Diverse research to commercial transitions
Ringeisen, B. R., Pirlo, R. K., Wu, P., Boland, T., Huang, Y. H., Sun, W., Hamid, Q., & Chrisey, D. B. (2013) · MRS Bulletin · doi:10.1557/mrs.2013.209 · Cited by 81
Self-citationMatrix-assisted pulsed laser methods for biofabrication
Riggs, B. C., Dias, A. D., Schiele, N. R., et al. (2011) · MRS Bulletin · doi:10.1557/mrs.2011.276 · Cited by 75
Xu, C., Zhang, Z., Christensen, K., Huang, Y. H., Fu, J., & Markwald, R. R. (2014) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4028578 · Cited by 49
Self-citationPredictive compensation-enabled horizontal inkjet printing of alginate tubular constructs
Xu, C., Christensen, K., Zhang, Z., Huang, Y. H., Fu, J., & Markwald, R. R. (2013) · Manufacturing Letters · doi:10.1016/j.mfglet.2013.09.003 · Cited by 39
Self-citation
Cited by
The bioink: A comprehensive review on bioprintable materials
Hospodiuk, M., Dey, M., Sosnoski, D., & Ozbolat, I. T. (2017) · Biotechnology Advances · doi:10.1016/j.biotechadv.2016.12.006 · Cited by 1,118
Microfluidic Bioprinting of Heterogeneous 3D Tissue Constructs Using Low‐Viscosity Bioink
Colosi, C., Shin, S. R., Manoharan, V., Massa, S., Costantini, M., Barbetta, A., Dokmeci, M. R., Dentini, M., & Khademhosseini, A. (2016) · Advanced Materials · doi:10.1002/adma.201503310 · Cited by 863
Recent trends in bioinks for 3D printing
Gopinathan, J., & Noh, I. (2018) · Biomaterials Research · doi:10.1186/s40824-018-0122-1 · Cited by 846
A decade of progress in tissue engineering
Khademhosseini, A., & Langer, R. (2016) · Nature Protocols · doi:10.1038/nprot.2016.123 · Cited by 747
Inkjet Bioprinting of Biomaterials
Li, X., Liu, B., Pei, B., Chen, J., Zhou, D., Peng, J., Zhang, X., Jia, W., & Xu, T. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00008 · Cited by 686
Metadata
- Authors
- Christensen, K., Xu, C., Chai, W., Zhang, Z., Fu, J., & Huang, Y.
- Venue
- Biotechnology and Bioengineering
- Publisher
- Wiley
- Published
- 2015-01-07
- Volume
- 112
- Issue
- 5
- Pages
- 1047-1055
- ISSN
- 0006-3592 (ISSN-L)
- 1097-0290
- OpenAlex
- W2102954558
- Cited by
- 351
- References
- 24
- FWCI
- 10.59
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
