The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Bioabsorption of polylactides with different molecular properties
Abstract
In order to study the effects of factors governing the bioabsorption rate of polylactides, implantation tests were carried out in rabbits using various samples (20 × 10 × 2 mm 3) differing in their chemical composition, residual monomer content, and molecular orientation. Copolymer samples with a higher lactic acid content showed a lower rate of absorption, whereas those with a higher unreacted monomer content were absorbed faster and showed a more drastic decrease in molecular weight. In contrast, degradation of the purified polymers was slow; the purified poly‐L‐lactide showed no weight change and a 50% reduction in molecular weight after 6 months of implantation. Scanning electron microscopy of the samples containing monomers showed a microporous structure extending from the surface to the inner region a few days after implantation, whereas the purified poly‐L‐lactide did not exhibit a microporous structural change even after 10 months of implantation.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Miller, R. A., Brady, J. M., & Cutright, D. E. (1977) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820110507 · Cited by 722
The Immunologic Release of Constituents from Neutrophil Leukocytes
Henson, P. M. (1971) · The Journal of Immunology · doi:10.4049/jimmunol.107.6.1535 · Cited by 347
In vivo biocompatibility studies. I. The cage implant system and a biodegradable hydrogel
Marchant, R., Hiltner, A., Hamlin, C., Rabinovitch, A., Slobodkin, R., & Anderson, J. M. (1983) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820170209 · Cited by 181
Histologic comparison of polylactic and polyglycolic acid sutures
Cutright, D. E., Beasley, J. D., & Perez, B. (1971) · Oral Surgery, Oral Medicine, Oral Pathology · doi:10.1016/0030-4220(71)90265-9 · Cited by 115
Cited by
Biocompatibility of engineered nanoparticles for drug delivery
Naahidi, S., Jafari, M., Edalat, F., Raymond, K., Khademhosseini, A., & Chen, P. (2013) · Journal of Controlled Release · doi:10.1016/j.jconrel.2012.12.013 · Cited by 809
Li, S. M., Garreau, H., & Vert, M. (1990) · Journal of Materials Science: Materials in Medicine · doi:10.1007/bf00700871 · Cited by 733
Li, S. (1999) · Journal of Biomedical Materials Research · doi:10.1002/(sici)1097-4636(1999)48:3<342::aid-jbm20>3.0.co;2-7 · Cited by 664
Kim, K., Yu, M., Zong, X., Chiu, J., Fang, D., Seo, Y.-S., Hsiao, B. S., Chu, B., & Hadjiargyrou, M. (2003) · Biomaterials · doi:10.1016/s0142-9612(03)00407-1 · Cited by 562
Gogolewski, S., Jovanovic, M., Perren, S. M., Dillon, J. G., & Hughes, M. K. (1993) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820270904 · Cited by 547
Tsuji, H. (1995) · Polymer · doi:10.1016/0032-3861(95)93647-5 · Cited by 519
Li, S., Garreau, H., & Vert, M. (1990) · Journal of Materials Science: Materials in Medicine · doi:10.1007/bf00701077 · Cited by 488
Alexis, F. (2005) · Polymer International · doi:10.1002/pi.1697 · Cited by 443
de Jong, S. J., Arias, E. R., Rijkers, D. T. S., van Nostrum, C. F., Kettenes-van den Bosch, J. J., & Hennink, W. E. (2001) · Polymer · doi:10.1016/s0032-3861(00)00646-7 · Cited by 414
Applications of Polymer Nanofibers in Biomedicine and Biotechnology
Venugopal, J., & Ramakrishna, S. (2005) · Applied Biochemistry and Biotechnology · doi:10.1385/abab:125:3:147 · Cited by 370
Tsuji, H., & Ikada, Y. (2000) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(99)00111-1 · Cited by 329
Self-citationMore about the degradation of LA/GA-derived matrices in aqueous media
Vert, M., Li, S., & Garreau, H. (1991) · Journal of Controlled Release · doi:10.1016/0168-3659(91)90027-b · Cited by 295
Engineering biomaterials to integrate and heal: The biocompatibility paradigm shifts
Bryers, J. D., Giachelli, C. M., & Ratner, B. D. (2012) · Biotechnology and Bioengineering · doi:10.1002/bit.24559 · Cited by 271
Modification of poly(L‐lactides) by blending: mechanical and hydrolytic behavior
Hiljanen‐Vainio, M., Varpomaa, P., Seppälä, J., & Törmälä, P. (1996) · Macromolecular Chemistry and Physics · doi:10.1002/macp.1996.021970427 · Cited by 249
Tsuji, H. (2002) · Polymer · doi:10.1016/s0032-3861(01)00752-2 · Cited by 226
Tsuji, H., & Miyauchi, S. (2001) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(00)00191-9 · Cited by 204
(Co)polymers of L‐lactide, 2. Mechanical properties
Grijpma, D. W., & Pennings, A. J. (1994) · Macromolecular Chemistry and Physics · doi:10.1002/macp.1994.021950516 · Cited by 191
Henton, D., Gruber, P., Lunt, J., & Randall, J. (2005) · Natural Fibers, Biopolymers, and Biocomposites · doi:10.1201/9780203508206.ch16 · Cited by 253
Spinu, M., Jackson, C., Keating, M. Y., & Gardner, K. H. (1996) · Journal of Macromolecular Science, Part A · doi:10.1080/10601329608014922 · Cited by 158
Migliaresi, C., Cohn, D., De Lollis, A., & Fambri, L. (1991) · Journal of Applied Polymer Science · doi:10.1002/app.1991.070430109 · Cited by 158
The effect of crystallinity on the deformation mechanism and bulk mechanical properties of PLLA
Renouf-Glauser, A. C., Rose, J., Farrar, D. F., & Cameron, R. E. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2005.03.002 · Cited by 153
Yamamoto, Y., Yasugi, K., Harada, A., Nagasaki, Y., & Kataoka, K. (2002) · Journal of Controlled Release · doi:10.1016/s0168-3659(02)00147-5 · Cited by 140
Blending of poly(lactic acid) and starches containing varying amylose content
Ke, T., Sun, S. X., & Seib, P. (2003) · Journal of Applied Polymer Science · doi:10.1002/app.12617 · Cited by 109
Resorbable polymer fibers for ligament augmentation
Dürselen, L., Dauner, M., Hierlemann, H., Planck, H., Claes, L. E., & Ignatius, A. (2001) · Journal of Biomedical Materials Research · doi:10.1002/jbm.1067 · Cited by 80
Bleach, N. C., Tanner, K. E., Kellomäki, M., & Törmälä, P. (2001) · Journal of Materials Science: Materials in Medicine · doi:10.1023/a:1012884310027 · Cited by 62
Controlled release systems based on poly(lactic acid). An in vitro and in vivo study
Andreopoulos, A. G., Hatzi, E. C., & Doxastakis, M. (2000) · Journal of Materials Science: Materials in Medicine · doi:10.1023/a:1008990109419 · Cited by 41
Tissue Response to Resorbable Synthetic Polymers
Gibbons, D. F. (1992) · Degradation Phenomena on Polymeric Biomaterials · doi:10.1007/978-3-642-77563-5_8 · Cited by 31
Azhari, Z., McMahon, S., Pierucci, L., Wang, W., & Cameron, R. E. (2018) · Polymer International · doi:10.1002/pi.5563 · Cited by 13
Metadata
- Authors
- Nakamura, T., Hitomi, S., Watanabe, S., Shimizu, Y., Jamshidi, K., Hyon, S. ‐., & Ikada, Y.
- Venue
- Journal of Biomedical Materials Research
- Publisher
- Wiley
- Published
- 1989-10
- Volume
- 23
- Issue
- 10
- Pages
- 1115-1130
- ISSN
- 0021-9304 (ISSN-L)
- 1097-4636
- OpenAlex
- W2033121543
- Cited by
- 241
- References
- 4
- FWCI
- 8.25
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.