The DOI matches its Crossref record; 42 of the 42 references it cites were found in a registry or an index.
Three‐dimensional extrusion bioprinting of single‐ and double‐network hydrogels containing dynamic covalent crosslinks
Open accessAbstract
The fabrication of three‐dimensional (3D) scaffolds is indispensable to tissue engineering and 3D printing is emerging as an important approach towards this. Hydrogels are often used as inks in extrusion‐based 3D printing, including with encapsulated cells; however, numerous challenging requirements exist, including appropriate viscosity, the ability to stabilize after extrusion, and cytocompatibility. Here, we present a shear‐thinning and self‐healing hydrogel crosslinked through dynamic covalent chemistry for 3D bioprinting. Specifically, hyaluronic acid was modified with either hydrazide or aldehyde groups and mixed to form hydrogels containing a dynamic hydrazone bond. Due to their shear‐thinning and self‐healing properties, the hydrogels could be extruded for 3D printing of structures with high shape fidelity, stability to relaxation, and cytocompatibility with encapsulated fibroblasts (>80% viability). Forces for extrusion and filament sizes were dependent on parameters such as material concentration and needle gauge. To increase scaffold functionality, a second photocrosslinkable interpenetrating network was included that was used for orthogonal photostiffening and photopatterning through a thiol‐ene reaction. Photostiffening increased the scaffold's modulus (∼300%) while significantly decreasing erosion (∼70%), whereas photopatterning allowed for spatial modification of scaffolds with dyes. Overall, this work introduces a simple approach to both fabricate and modify 3D printed scaffolds. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 106A: 865–875, 2018.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A modified uronic acid carbazole reaction
Bitter, T., & Muir, H. M. (1962) · Analytical Biochemistry · doi:10.1016/0003-2697(62)90095-7 · Cited by 6,274
Hydrogels as extracellular matrix mimics for 3D cell culture
Tibbitt, M. W., & Anseth, K. S. (2009) · Biotechnology and Bioengineering · doi:10.1002/bit.22361 · Cited by 2,727
Three-Dimensional Scaffolds for Tissue Engineering Applications: Role of Porosity and Pore Size
Loh, Q. L., & Choong, C. (2013) · Tissue Engineering Part B: Reviews · doi:10.1089/ten.teb.2012.0437 · Cited by 2,668
Rowan, S. J., Cantrill, S. J., Cousins, G. R. L., Sanders, J. K. M., & Stoddart, J. F. (2002) · Angewandte Chemie International Edition · doi:10.1002/1521-3773(20020315)41:6<898::aid-anie898>3.0.co;2-e · Cited by 2,588
3D bioprinting of vascularized, heterogeneous cell-laden tissue constructs
Kolesky, D. B., Truby, R. L., Gladman, A. S., Busbee, T. A., Homan, K. A., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201305506 · Cited by 2,102
25th Anniversary Article: Engineering Hydrogels for Biofabrication
Malda, J., Visser, J., Melchels, F. P., Jüngst, T., Hennink, W. E., Dhert, W. J. A., Groll, J., & Hutmacher, D. W. (2013) · Advanced Materials · doi:10.1002/adma.201302042 · Cited by 1,901
Ruhland, K. (2020) · Catalysis from A to Z · doi:10.1002/9783527809080.cataz06077 · Cited by 1,724
Current advances and future perspectives in extrusion-based bioprinting
Ozbolat, I. T., & Hospodiuk, M. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2015.10.076 · Cited by 1,572
Recent advances in dynamic covalent chemistry
Jin, Y., Yu, C., Denman, R. J., & Zhang, W. (2013) · Chemical Society Reviews · doi:10.1039/c3cs60044k · Cited by 1,487
Direct 3D Printing of Shear‐Thinning Hydrogels into Self‐Healing Hydrogels
Highley, C. B., Rodell, C. B., & Burdick, J. A. (2015) · Advanced Materials · doi:10.1002/adma.201501234 · Cited by 1,043
Self-citationControlled Degradation and Mechanical Behavior of Photopolymerized Hyaluronic Acid Networks
Burdick, J. A., Chung, C., Jia, X., Randolph, M. A., & Langer, R. (2005) · Biomacromolecules · doi:10.1021/bm049508a · Cited by 777
Self-citationThe design of reversible hydrogels to capture extracellular matrix dynamics
Rosales, A. M., & Anseth, K. S. (2016) · Nature Reviews Materials · doi:10.1038/natrevmats.2015.12 · Cited by 772
Biofabrication: reappraising the definition of an evolving field
Groll, J., Boland, T., Blunk, T., Burdick, J. A., Cho, D.-W., Dalton, P. D., Derby, B., Forgacs, G., Li, Q., Mironov, V. A., et al. (2016) · Biofabrication · doi:10.1088/1758-5090/8/1/013001 · Cited by 731
Self-citationHuman microvasculature fabrication using thermal inkjet printing technology
Cui, X., & Boland, T. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2009.07.056 · Cited by 704
Novel Biocompatible Polysaccharide‐Based Self‐Healing Hydrogel
Wei, Z., Yang, J. H., Liu, Z. Q., Xu, F., Zhou, J. X., Zrínyi, M., Osada, Y., & Chen, Y. M. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201401502 · Cited by 660
3D Printing of Shear-Thinning Hyaluronic Acid Hydrogels with Secondary Cross-Linking
Ouyang, L., Highley, C. B., Rodell, C. B., Sun, W., & Burdick, J. A. (2016) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00158 · Cited by 607
Self-citationA Multimaterial Bioink Method for 3D Printing Tunable, Cell‐Compatible Hydrogels
Rutz, A. L., Hyland, K. E., Jakus, A. E., Burghardt, W. R., & Shah, R. N. (2015) · Advanced Materials · doi:10.1002/adma.201405076 · Cited by 572
Shear-thinning and self-healing hydrogels as injectable therapeutics and for 3D-printing
Loebel, C., Rodell, C. B., Chen, M. H., & Burdick, J. A. (2017) · Nature Protocols · doi:10.1038/nprot.2017.053 · Cited by 565
Self-citationOuyang, L., Highley, C. B., Sun, W., & Burdick, J. A. (2017) · Advanced Materials · doi:10.1002/adma.201604983 · Cited by 524
Self-citationInjectable and bioresponsive hydrogels for on-demand matrix metalloproteinase inhibition
Purcell, B. P., Lobb, D., Charati, M. B., Dorsey, S. M., Wade, R. J., Zellars, K. N., Doviak, H., Pettaway, S., Logdon, C. B., Shuman, J. A., et al. (2014) · Nature Materials · doi:10.1038/nmat3922 · Cited by 479
Self-citationRodell, C. B., Kaminski, A. L., & Burdick, J. A. (2013) · Biomacromolecules · doi:10.1021/bm401280z · Cited by 425
Self-citationHealable polymeric materials: a tutorial review
Burattini, S., Greenland, B. W., Chappell, D., Colquhoun, H. M., & Hayes, W. (2010) · Chemical Society Reviews · doi:10.1039/b904502n · Cited by 416
McKinnon, D. D., Domaille, D. W., Cha, J. N., & Anseth, K. S. (2014) · Advanced Materials · doi:10.1002/adma.201303680 · Cited by 414
3D Bioprinting of Spatially Heterogeneous Collagen Constructs for Cartilage Tissue Engineering
Rhee, S., Puetzer, J. L., Mason, B. N., Reinhart-King, C. A., & Bonassar, L. J. (2016) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00288 · Cited by 364
Bioprinting Endothelial Cells With Alginate for 3D Tissue Constructs
Khalil, S., & Sun, W. (2009) · Journal of Biomechanical Engineering · doi:10.1115/1.3128729 · Cited by 337
Gramlich, W. M., Kim, I. L., & Burdick, J. A. (2013) · Biomaterials · doi:10.1016/j.biomaterials.2013.08.089 · Cited by 337
Self-citationAdvances in Bioactive Hydrogels to Probe and Direct Cell Fate
DeForest, C. A., & Anseth, K. S. (2012) · Annual Review of Chemical and Biomolecular Engineering · doi:10.1146/annurev-chembioeng-062011-080945 · Cited by 323
Design and Printing Strategies in 3D Bioprinting of Cell‐Hydrogels: A Review
Lee, J. M., & Yeong, W. Y. (2016) · Advanced Healthcare Materials · doi:10.1002/adhm.201600435 · Cited by 310
Rodell, C. B., Dusaj, N. N., Highley, C. B., & Burdick, J. A. (2016) · Advanced Materials · doi:10.1002/adma.201602268 · Cited by 291
Self-citationWang, H., Zhu, D., Paul, A., Cai, L., Enejder, A., Yang, F., & Heilshorn, S. C. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201605609 · Cited by 277
Ito, T., Yeo, Y., Highley, C. B., Bellas, E., Benitez, C. A., & Kohane, D. S. (2007) · Biomaterials · doi:10.1016/j.biomaterials.2006.10.021 · Cited by 263
Self-citationSu, W.-Y., Chen, Y.-C., & Lin, F.-H. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2010.02.037 · Cited by 247
Biofabrication of Cell‐Loaded 3D Spider Silk Constructs
Schacht, K., Jüngst, T., Schweinlin, M., Ewald, A., Groll, J., & Scheibel, T. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201409846 · Cited by 232
Yeo, Y., Highley, C. B., Bellas, E., Ito, T., Marini, R., Langer, R., & Kohane, D. S. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2006.04.043 · Cited by 227
Self-citationStrong and Rapidly Self‐Healing Hydrogels: Potential Hemostatic Materials
Huang, W., Wang, Y., Chen, Y., Zhao, Y., Zhang, Q., Zheng, X., Chen, L., & Zhang, L. (2016) · Advanced Healthcare Materials · doi:10.1002/adhm.201600720 · Cited by 180
Bio-printing Cell-Laden Matrigel-Agarose Constructs
Fan, R., Piou, M., Darling, E., Cormier, D., Sun, J., & Wan, J. (2016) · Journal of Biomaterials Applications · doi:10.1177/0885328216669238 · Cited by 132
Mazzoccoli, J. P., Feke, D. L., Baskaran, H., & Pintauro, P. N. (2009) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.32563 · Cited by 130
Self-Activated Healable Hydrogels with Reversible Temperature Responsiveness
Chang, R., Wang, X., Xu, L., An, H., & Qin, J. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b08279 · Cited by 126
Yeo, Y., Ito, T., Bellas, E., Highley, C. B., Marini, R. P., & Kohane, D. S. (2007) · Annals of Surgery · doi:10.1097/01.sla.0000251519.49405.55 · Cited by 105
Self-citation3D Printing of Microstructured and Stretchable Chitosan Hydrogel for Guided Cell Growth
Wu, Q., Maire, M., Lerouge, S., Therriault, D., & Heuzey, M. (2017) · Advanced Biosystems · doi:10.1002/adbi.201700058 · Cited by 103
Tirella, A., Vozzi, F., Vozzi, G., & Ahluwalia, A. D. (2010) · Tissue Engineering Part C Methods · doi:10.1089/ten.tec.2010.0195 · Cited by 41
Multimaterial, heterogeneous, and multicellular three-dimensional bioprinting
Maria, C. D., Vozzi, G., & Moroni, L. (2017) · MRS Bulletin · doi:10.1557/mrs.2017.165 · Cited by 28
Cited by
Printability and shape fidelity of bioinks in 3D bioprinting
Schwab, A., Levato, R., D’Este, M., Piluso, S., Eglin, D., & Malda, J. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00084 · Cited by 1,359
Translational Applications of Hydrogels
Correa, S., Grosskopf, A. K., Lopez Hernandez, H., Chan, D., Yu, A. C., Stapleton, L. M., & Appel, E. A. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c01177 · Cited by 1,143
Self-Healing Injectable Hydrogels for Tissue Regeneration
Bertsch, P., Diba, M., Mooney, D. J., & Leeuwenburgh, S. C. G. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00179 · Cited by 892
Smart Hydrogels in Tissue Engineering and Regenerative Medicine
Mantha, S., Pillai, S., Khayambashi, P., Upadhyay, A., Zhang, Y., Tao, O., Pham, H. M., & Tran, S. D. (2019) · Materials · doi:10.3390/ma12203323 · Cited by 857
Hydrogel Bioink Reinforcement for Additive Manufacturing: A Focused Review of Emerging Strategies
Chimene, D., Kaunas, R., & Gaharwar, A. K. (2020) · Advanced Materials · doi:10.1002/adma.201902026 · Cited by 600
Metadata
- Authors
- Wang, L. L., Highley, C. B., Yeh, Y., Galarraga, J. H., Uman, S., & Burdick, J. A.
- Venue
- Journal of Biomedical Materials Research Part A
- Publisher
- Wiley
- Published
- 2018-01-23
- Volume
- 106
- Issue
- 4
- Pages
- 865-875
- ISSN
- 1549-3296 (ISSN-L)
- 1552-4965
- OpenAlex
- W2781881109
- Cited by
- 286
- References
- 42
- FWCI
- 12.74
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.