Uniaxial yield strains for bovine trabecular bone are isotropic and asymmetric
The DOI matches its Crossref record; 27 of the 27 references it cites were found in a registry or an index.
Abstract
Although evidence suggests that yield strains for trabecular bone are isotropic, i.e., independent of loading direction, decisive support for this hypothesis has remained elusive. To explicitly test whether yield strains for trabecular bone are isotropic, compressive and tensile yield strains of 51 specimens of bovine tibial trabecular bone (0.41 ± 0.08 g/cm 3 [mean apparent density ± SD]) were measured without end artifacts in on‐axis (along the principal trabecular orientation) and off‐axis (30–40° oblique to on‐axis) orientations. Yield strains for the on‐axis and off‐axis orientations were similar in tension (0.80 ± 0.03% compared with 0.85 ± 0.04%, p = 0.21) and compression (0.97 ± 0.05% compared with 0.96 ± 0.07%, p > 0.99); as expected, modulus and strength depended on loading direction. When considered with an ancillary experiment on bovine tibial trabecular bone that showed yield strains to be similar between on‐axis and 90° off‐axis bone, these results firmly establish the isotropy of uniaxial yield strains for bovine tibial trabecular bone. This bone is of high density and has a strong, plate‐type, anisotropic architecture. Therefore, yield strains for uniaxial loading are expected to be isotropic, or nearly so, for other types of dense trabecular bone, although further work is required to confirm this and to establish this behavior for bone of lower density.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“High-density trabecular bone, such as that from the human femoral neck and bovine proximal tibia, tends to have isotropic yield strains (97, 98).”
From Bone Mechanical Properties in Healthy and Diseased States (2018) · cites this paper as [97]
In the citing paper
“Ultimate strains in trabecular bone also appear to be isotropic and range from 1.0% to 2.5% (97, 99), whereas yield strains range from 0.70% to 0.77% in compression and from 0.65% to 0.71% in tension (82).”
From Bone Mechanical Properties in Healthy and Diseased States (2018) · cites this paper as [97]
Citations
Cites
The mechanical behaviour of cancellous bone
Gibson, L. J. (1985) · Journal of Biomechanics · doi:10.1016/0021-9290(85)90287-8 · Cited by 932 · cited 2×
“Because the micromechanics and failure mechanisms of individual trabeculae depend on architecture and apparent density (8,14,16,22), extension of the trends reported here to such bone requires further”
Yield strain behavior of trabecular bone
Kopperdahl, D. L., & Keaveny, T. M. (1998) · Journal of Biomechanics · doi:10.1016/s0021-9290(98)00057-8 · Cited by 653
Self-citationMosekilde, L., Mosekilde, L., & Danielsen, C. C. (1987) · Bone · doi:10.1016/8756-3282(87)90074-3 · Cited by 492
Systematic and random errors in compression testing of trabecular bone
Keaveny, T. M., Pinilla, T. P., Crawford, R. P., Kopperdahl, D. L., & Lou, A. (1997) · Journal of Orthopaedic Research · doi:10.1002/jor.1100150115 · Cited by 377
Self-citationKeaveny, T. M., Wachtel, E. F., Ford, C. M., & Hayes, W. C. (1994) · Journal of Biomechanics · doi:10.1016/0021-9290(94)90054-x · Cited by 330
Self-citationFracture Prediction for the Proximal Femur Using Finite Element Models: Part I—Linear Analysis
Lotz, J. C., Cheal, E. J., & Hayes, W. C. (1991) · Journal of Biomechanical Engineering · doi:10.1115/1.2895412 · Cited by 309
Trabecular bone exhibits fully linear elastic behavior and yields at low strains
Keaveny, T. M., Guo, X. E., Wachtel, E. F., McMahon, T. A., & Hayes, W. C. (1994) · Journal of Biomechanics · doi:10.1016/0021-9290(94)90053-1 · Cited by 300
Self-citationMechanical Property Distributions in the Cancellous Bone of the Human Proximal Femur
Brown, T. D., & Ferguson, A. B. (1980) · Acta Orthopaedica Scandinavica · doi:10.3109/17453678008990819 · Cited by 282
Tensile and compressive properties of cancellous bone
Røhl, L., Larsen, E., Linde, F., Odgaard, A., & Jørgensen, J. (1991) · Journal of Biomechanics · doi:10.1016/0021-9290(91)90006-9 · Cited by 279
The underestimation of Young's modulus in compressive testing of cancellous bone specimens
Odgaard, A., & Linde, F. (1991) · Journal of Biomechanics · doi:10.1016/0021-9290(91)90333-i · Cited by 225
Research works printed but not linked: 2
- 10.1016/0021-9290(93)90021-6 · DOI
- Keaveny TM, 1994, Yield strains for bovine trabecular bone are isotropic but asymmetric, Trans Orthop Res Soc, 19, 428
Cited by
Bone Mechanical Properties in Healthy and Diseased States
Morgan, E. F., Unnikrisnan, G. U., & Hussein, A. I. (2018) · Annual Review of Biomedical Engineering · doi:10.1146/annurev-bioeng-062117-121139 · Cited by 1,026
“High-density trabecular bone, such as that from the human femoral neck and bovine proximal tibia, tends to have isotropic yield strains (97, 98).”
Biomechanics of cellular solids
Gibson, L. J. (2005) · Journal of Biomechanics · doi:10.1016/j.jbiomech.2004.09.027 · Cited by 961
Biomechanics of Trabecular Bone
Keaveny, T. M., Morgan, E. F., Niebur, G. L., & Yeh, O. C. (2001) · Annual Review of Biomedical Engineering · doi:10.1146/annurev.bioeng.3.1.307 · Cited by 801
Self-citationDependence of yield strain of human trabecular bone on anatomic site
Morgan, E. F., & Keaveny, T. M. (2001) · Journal of Biomechanics · doi:10.1016/s0021-9290(01)00011-2 · Cited by 705
Self-citationSchileo, E., Taddei, F., Cristofolini, L., & Viceconti, M. (2008) · Journal of Biomechanics · doi:10.1016/j.jbiomech.2007.09.009 · Cited by 373
“, 2003; Taylor, 2003), there is a growing consensus on the substantial isotropy of yield strain and on its invariance to density (Bayraktar et al., 2004b; Chang et al., 1999; Cowin and He, 2005; Currey, 2004; Kopperdahl and Keaveny, 1998), and a strain-based criteria managed to well fit mono- and multi-axial experimen…”
BackgroundInfluentialO'Mahony, A. M., Williams, J. L., & Spencer, P. (2001) · Clinical Oral Implants Research · doi:10.1034/j.1600-0501.2001.120614.x · Cited by 248
Liu, X. S., Sajda, P., Saha, P. K., Wehrli, F. W., Bevill, G., Keaveny, T. M., & Guo, X. E. (2008) · Journal of Bone and Mineral Research · doi:10.1359/jbmr.071009 · Cited by 239
Self-citationLiu, X. S., Sajda, P., Saha, P. K., Wehrli, F. W., & Guo, X. E. (2006) · Journal of Bone and Mineral Research · doi:10.1359/jbmr.060716 · Cited by 207
Mechanical properties of cancellous bone in the human mandibular condyle are anisotropic
Giesen, E. B. W., Ding, M., Dalstra, M., & van Eijden, T. M. G. J. (2001) · Journal of Biomechanics · doi:10.1016/s0021-9290(01)00030-6 · Cited by 201
“A direction dependency of ultimate strain was also found by Zysset and Curnier (1996), but not by Chang et al. (1999). The values for E-modulus and strength we found were considerably larger than the values reported for cancellous bone of the mandibular body (E-modulus: 56.”
ResultNonlinear Behavior of Trabecular Bone at Small Strains
Morgan, E. F., Yeh, O. C., Chang, W. C., & Keaveny, T. M. (2001) · Journal of Biomechanical Engineering · doi:10.1115/1.1338122 · Cited by 107
Self-citationThe Modified Super-Ellipsoid Yield Criterion for Human Trabecular Bone
Bayraktar, H. H., Gupta, A., Kwon, R. Y., Papadopoulos, P., & Keaveny, T. M. (2004) · Journal of Biomechanical Engineering · doi:10.1115/1.1763177 · Cited by 99
Self-citationHong, J., Cabe, G. D., Tedrow, J. R., Hipp, J. A., & Snyder, B. D. (2004) · Journal of Orthopaedic Research · doi:10.1016/j.orthres.2003.09.006 · Cited by 91
Perillo‐Marcone, A., & Taylor, M. (2006) · Journal of Biomechanical Engineering · doi:10.1115/1.2401177 · Cited by 87
Fenech, C. M., & Keaveny, T. M. (1999) · Journal of Biomechanical Engineering · doi:10.1115/1.2798339 · Cited by 81
Self-citationZhang, X. H., Liu, X. S., Vasilic, B., Wehrli, F. W., Benito, M., Rajapakse, C. S., Snyder, P. J., & Guo, X. E. (2008) · Journal of Bone and Mineral Research · doi:10.1359/jbmr.080405 · Cited by 79
Contribution of inter-site variations in architecture to trabecular bone apparent yield strains
Morgan, E. F., Bayraktar, H. H., Yeh, O. C., Majumdar, S., Burghardt, A. J., & Keaveny, T. M. (2004) · Journal of Biomechanics · doi:10.1016/j.jbiomech.2003.12.037 · Cited by 92
Self-citationFinite Element Analysis of the Resurfaced Femoral Head
Taylor, M. (2006) · Proceedings of the Institution of Mechanical Engineers Part H Journal of Engineering in Medicine · doi:10.1243/095441105x93631 · Cited by 76
Kelly, N., & McGarry, P. (2011) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2011.11.013 · Cited by 88
“In contrast, trabecular bone yield stress and elastic modulus are not uniform within anatomic site (Chang et al., 1999; Morgan and Keaveny, 2001).”
BackgroundInfluentialLaz, P. J., Stowe, J. Q., Baldwin, M. A., Petrella, A. J., & Rullkoetter, P. J. (2007) · Journal of Biomechanics · doi:10.1016/j.jbiomech.2007.03.013 · Cited by 76
“The probabilistic platform could be similarly applied to modulus and yield strain, based on, for example, standard deviations associated with yield strain (Chang et al., 1999).”
BackgroundMethodRadcliffe, I. A. J., & Taylor, M. (2007) · Clinical Biomechanics · doi:10.1016/j.clinbiomech.2006.12.001 · Cited by 79
“As such this study implements a strain-based analysis which may prove more relevant than conventional stress-based analyses (Chang et al., 1999; Taylor, 2006).”
MethodConstitutive modelling of inelastic behaviour of cortical bone
NATALI, A. N., Carniel, E. L., & Pavan, P. G. (2008) · Medical Engineering & Physics · doi:10.1016/j.medengphy.2007.12.001 · Cited by 68
Pal, B., Gupta, S., & New, A. (2009) · Proceedings of the Institution of Mechanical Engineers Part H Journal of Engineering in Medicine · doi:10.1243/09544119jeim488 · Cited by 60
Heterogeneity of yield strain in low-density versus high-density human trabecular bone
Bevill, G., Farhamand, F., & Keaveny, T. M. (2009) · Journal of Biomechanics · doi:10.1016/j.jbiomech.2009.05.023 · Cited by 57
“A unique feature of trabecular bone mechanical behavior is that apparent failure strains may be isotropic despite substantial anisotropy of strength, elastic modulus, and microarchitecture (Chang et al., 1999).”
BackgroundSelf-citationBiaxial Failure Behavior of Bovine Tibial Trabecular Bone
Niebur, G. L., Feldstein, M. J., & Keaveny, T. M. (2002) · Journal of Biomechanical Engineering · doi:10.1115/1.1517566 · Cited by 66
Self-citationFernández, M. P., Kao, A. P., Bonithon, R., Howells, D., Bodey, A. J., Wanelik, K., Witte, F., Johnston, R. E., Arora, H., & Tozzi, G. (2021) · Acta Biomaterialia · doi:10.1016/j.actbio.2021.06.014 · Cited by 58
Thompson, M. S., Northmore-Ball, M. D., & Tanner, K. E. (2002) · Proceedings of the Institution of Mechanical Engineers Part H Journal of Engineering in Medicine · doi:10.1243/09544110260138727 · Cited by 48
Makiyama, A. M., Vajjhala, S., & Gibson, L. J. (2002) · Journal of Biomechanical Engineering · doi:10.1115/1.1503792 · Cited by 48
Levrero-Florencio, F., Margetts, L., Sales, E., Xie, S., Manda, K., & Pankaj, P. (2016) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2016.04.008 · Cited by 46
“Often, bone macroscopic properties are assumed to be homogeneous with separate elastic properties being assigned to cortical and trabecular bone (Completo et al., 2009; Conlisk et al., 2015).”
Ariza, O., Gilchrist, S. E., Widmer, R. P., Guy, P., Ferguson, S. J., Cripton, P. A., & Helgason, B. (2014) · Journal of Biomechanics · doi:10.1016/j.jbiomech.2014.11.042 · Cited by 53
An Alternative Fabric-based Yield and Failure Criterion for Trabecular Bone
Zysset, P., & Rincón, L. (2006) · Mechanics of Biological Tissue · doi:10.1007/3-540-31184-x_33 · Cited by 39
Liu, X. S., Huang, A., Zhang, X. H., Sajda, P., Ji, B., & Guo, X.-D. E. (2008) · Bone · doi:10.1016/j.bone.2008.04.008 · Cited by 40
“Bone remodeling Digital topology Micro computed tomography imaging Trabecular bone Trabecular plate/rod mputational simulation of dynamic process of trabecular bone remodeling was developed with all the parameters derived from physiological and clinical data.”
MethodSensitivity of damage predictions to tissue level yield properties and apparent loading conditions
Niebur, G. L., Yuen, J. C., Burghardt, A. J., & Keaveny, T. M. (2001) · Journal of Biomechanics · doi:10.1016/s0021-9290(01)00003-3 · Cited by 38
Self-citationInvestigation of bone inelastic response in interaction phenomena with dental implants
NATALI, A. N., Carniel, E. L., & Pavan, P. G. (2008) · Dental Materials · doi:10.1016/j.dental.2007.11.024 · Cited by 35
“[18] Chang WCW, Christensen TM, Pinilla TR, Keaveny TM.”
BackgroundTensile and compressive stress yield criteria for cancellous bone
Cowin, S. C., & He, Q. (2004) · Journal of Biomechanics · doi:10.1016/j.jbiomech.2004.03.003 · Cited by 34
Dental implants press fit phenomena: Biomechanical analysis considering bone inelastic response
NATALI, A. N., Carniel, E. L., & Pavan, P. G. (2009) · Dental Materials · doi:10.1016/j.dental.2008.11.002 · Cited by 32
Towards patient‐specific material modeling of trabecular bone post‐yield behavior
Carretta, R., Lorenzetti, S., & Müller, R. (2012) · International Journal for Numerical Methods in Biomedical Engineering · doi:10.1002/cnm.2516 · Cited by 34
“A study with well-aligned samples, tested in tension and compression, indicates that yield strains for uniaxial loading are expected to be isotropic [81].”
BackgroundEffect of torsional loading on compressive fatigue behaviour of trabecular bone
Januddi, F., Rabiatul, A. A. R., Harun, M. N., Kadir, M. R. A., Kamarul, T., & Syahrom, A. (2015) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2015.09.006 · Cited by 30
“The data presented in this study is corroborated with other studies (Chang et al., 1999; Kopperdahl and Keaveny, 1998; Morgan et al., 2001).”
Determination of suitable sample sizes for multi-patient based finite element studies
Radcliffe, I. A. J., Prescott, P., Man, H. S., & Taylor, M. (2007) · Medical Engineering & Physics · doi:10.1016/j.medengphy.2006.11.007 · Cited by 32
Aiyangar, A. K., Vivanco, J. F., Au, A. G., Anderson, P. A., Smith, E. L., & Ploeg, H. (2014) · Journal of Biomechanical Engineering · doi:10.1115/1.4027663 · Cited by 29
“The advantages of using strain-based meas ures compared to stress-based measures for characterizing fail ure in trabecular bone have been previously attributed to three main reasons: its relative uniformity within an anatomic site [22], potential independence from, or at best weak dependence on bone density [14] and…”
BackgroundResultFinite element analysis of tibial fractures.
Wong, C., Mikkelsen, P. S., Hansen, L. B., Darvann, T. A., & Gebuhr, P. (2010) · PubMed · Cited by 29
He, Q. (2004) · International Journal of Engineering Science · doi:10.1016/j.ijengsci.2004.04.009 · Cited by 23
Pal, B., Gupta, S., & New, A. (2009) · Computer Methods in Biomechanics & Biomedical Engineering · doi:10.1080/10255840903067064 · Cited by 22
“It has been reported that yield strain of trabecular bone is uniform within an anatomic site (it does not depend on the apparent density) and is believed to be isotropic (Chang et al. 1999; Morgan and Keaveny 2001).”
BackgroundCommonality in the microarchitecture of trabecular bone: A preliminary study
Zhao, F., Kirby, M. L., Roy, A., Hu, Y., Guo, X., & Wang, X. (2018) · Bone · doi:10.1016/j.bone.2018.03.003 · Cited by 22
Martin, R. B., Burr, D. B., Sharkey, N. A., & Fyhrie, D. P. (2015) · Springer eBooks · doi:10.1007/978-1-4939-3002-9_7 · Cited by 37
Rothstock, S., de Uhlenbrock, A. G., Bishop, N. E., & Morlock, M. M. (2009) · Journal of Biomechanics · doi:10.1016/j.jbiomech.2009.09.052 · Cited by 20
“(Morgan and Keaveny, 2001) as well as on a Post-Yield Modulus which was assumed to be 5% of the Young’s Modulus (Chang et al., 1999).”
MethodWood, Z., Lynn, L., Nguyen, J. T., Black, M. A., Patel, M. K., & Barak, M. M. (2019) · Bone · doi:10.1016/j.bone.2019.08.002 · Cited by 21
“Their results revealed similar yield strain values for the on- and off-axis loadings but a decrease of around 30% in stiffness when samples were loaded off-axis [54].”
ResultThree-dimensional rendering of trabecular bone microarchitecture using a probabilistic approach
Kirby, M. L., Morshed, A. H., Gomez, J., Xiao, P., Hu, Y., Guo, X.-D. E., & Wang, X. (2020) · Biomechanics and Modeling in Mechanobiology · doi:10.1007/s10237-020-01286-8 · Cited by 18
“…from the center of the femoral necks, and the longitudinal axis of the cores was aligned with the primary orientation of the trabecular structures, based on a procedure reported in the literature (Keav-eny et al. 1994; Kopperdahl and Keaveny 1998; Chang et al. 1999; Morgan and Keaveny 2001).”
MethodThe Mechanical Properties of Bone
Fyhrie, D. P. (2010) · Elsevier eBooks · doi:10.1016/b978-0-12-374602-3.00005-5 · Cited by 21
Anisotropic bone remodeling of a biomimetic metal-on-metal hip resurfacing implant
Caouette, C., Bureau, M., Vendittoli, P., Lavigne, M. J. F., & Nuño, N. (2011) · Medical Engineering & Physics · doi:10.1016/j.medengphy.2011.08.015 · Cited by 17
“Strain shielding was preferred to stress shielding to compare the models because uniaxial yield strain of bone is uniform within an anatomic site [20,32] and is also believed to be isotropic [32]: this makes principal strains a useable site-independent “yield criterion” for bone material.”
BackgroundThe Quartic Piecewise-Linear Criterion for the Multiaxial Yield Behavior of Human Trabecular Bone
Sanyal, A., Scheffelin, J., & Keaveny, T. M. (2014) · Journal of Biomechanical Engineering · doi:10.1115/1.4029109 · Cited by 19
Self-citationCollins, C. J., Andriotis, O. G., Nedelkovski, V., Frank, M., Katsamenis, O. L., & Thurner, P. J. (2018) · Elsevier eBooks · doi:10.1016/b978-0-12-801238-3.99937-9 · Cited by 26
Biomechanics of Vertebral Bone
Keaveny, T. M., & Buckley, J. M. (2006) · Elsevier eBooks · doi:10.1016/b978-012369390-7/50005-8 · Cited by 20
Self-citationMalekmotiei, L., Farahmand, F., Shodja, H. M., & Samadi-Dooki, A. (2013) · Journal of Biomechanical Engineering · doi:10.1115/1.4023699 · Cited by 15
Olsen, M., Davis, E. T., Whyne, C. M., Zdero, R., & Schemitsch, E. H. (2010) · Journal of Biomechanical Engineering · doi:10.1115/1.4001159 · Cited by 11
Rate and age-dependent damage elasticity formulation for efficient hip fracture simulations
Villette, C. C., & Phillips, A. (2018) · Medical Engineering & Physics · doi:10.1016/j.medengphy.2018.07.016 · Cited by 11
Sanyal, A., & Keaveny, T. M. (2013) · Journal of Biomechanical Engineering · doi:10.1115/1.4025679 · Cited by 11
Self-citationOuranj, Z. D., Hosseini, S., Alipour, A., Homaeigohar, S., Azari, S., Ghazizadeh, L., Shokrgozar, M. A., Thomas, S., Irian, S., & Shahsavarani, H. (2024) · Marine Life Science & Technology · doi:10.1007/s42995-024-00241-1 · Cited by 10
“1F. Derived from this stress–strain curve, the Young’s modulus of the scaffold graph (linear section, R 2 = 0.8657) was calculated to be 9.2 MPa in comparison with that of human trabecular bone ranges between 10 and 3,000 MPa (Morgan et al. 2018).”
InfluentialDevelopmental Biology of the Skeletal System
Doll, B. A. (2004) · CRC Press eBooks · doi:10.1201/9780203495094.ch1 · Cited by 8
van den Munckhof, S., Nikooyan, A. A., & ZADPOOR, A. A. (2014) · Journal of Mechanics in Medicine and Biology · doi:10.1142/s0219519415300033 · Cited by 6
Shore, S. W., Unnikrishnan, G. U., Hussein, A. I., & Morgan, E. F. (2012) · CRC Press eBooks · doi:10.1201/b13733-3 · Cited by 8
Diagnosis of spine pseudoarthrosis based on the biomechanical properties of bone
Hipp, J. A., Mikhael, M. M., Reitman, C. A., Buser, Z., Patel, V. V., Chaput, C. D., Ghiselli, G., DeVine, J. G., Berven, S., Nunley, P. D., et al. (2024) · The Spine Journal · doi:10.1016/j.spinee.2024.08.007 · Cited by 6
Fan, H., Tanoto, H., Lin, P.-T., Bowles, F., Zhang, S., Liu, Z., Li, F., Klineberg, E. O., & Zhou, Y. (2025) · Extreme Mechanics Letters · doi:10.1016/j.eml.2025.102317 · Cited by 5
NATALI, A. N., Carniel, E. L., & Pavan, P. G. (2009) · Journal of Adhesion Science and Technology · doi:10.1163/156856109x432712 · Cited by 3
MICROSTRUCTURAL STRESSES AND STRAINS ASSOCIATED WITH TRABECULAR BONE MICRODAMAGE
Nagaraja, S. (2006) · UPT. Syiah Kuala University Library (Syiah Kuala University) · Cited by 4
Ciaccia, M., Muller-Karger, C. M., Casanova, E., & Antonio, T. S. (2016) · IEEE Ecuador Technical Chapters Meeting (ETCM) · doi:10.1109/etcm.2016.7750871 · Cited by 2
“The decision to simulate a uniaxial stress state was based on works such as [17], [19], who have reported that the stress state at the starting point of fractures in numerical models of femurs is almost uniaxial.”
BackgroundFinite Element Analysis of Bone and Experimental Validation
Almeida, F. M. P., & Completo, A. (2020) · Lecture notes in computational vision and biomechanics · doi:10.1007/978-3-030-37541-6_7 · Cited by 1
Bone Strength and Mechanical Behaviour
Troy, K. L., & Collins, C. J. (2022) · Elsevier eBooks · doi:10.1016/b978-0-12-822944-6.00061-x · Cited by 2
Preclinical biomechanics of a new intramedullary nail for femoral diaphyseal fractures
Ivanov, D. V., Barabash, A., & Barabash, Y. (2015) · Russian Open Medical Journal · doi:10.15275/rusomj.2015.0205 · Cited by 3
Badanie właściwości mechanicznych i histomorfometrycznych tkanki kostnej kości udowej człowieka
Będziński, R., Ostrowska, A., Ścigała, K., & Mazurkiewicz, A. (2005) · Inżynieria Biomateriałów · Cited by 1
Time-sequence of biomechanical adaption in trabecular tissue during estrogen deficiency
O’Sullivan, L. (2020) · Arrow@dit (Dublin Institute of Technology) · doi:10.13025/17271 · Cited by 1
Biomechanics of Osteoporotic Bone
Aspden, R. M. (2002) · CRC Press eBooks · doi:10.1201/b14228-5
Monotonic and cyclic behaviour of trabecular bone under uniaxial and multiaxial loading
Januddi, M. S., & Januddi, M. A. F. M. S. (2015)
Kauffman, T. L., Lindsey, C., & Lewis, R. (2007) · Elsevier eBooks · doi:10.1016/b978-0-443-10233-2.50069-9
Bone as a Material: Lessons From Nature
O’Sullivan, L., & McNamara, L. M. (2020) · Elsevier eBooks · doi:10.1016/b978-0-12-803581-8.12099-5
Experimental Analysis on Sheep Tibia Bone under Various load condition
Narayanaswamy, G., Thomas, B. A., & Keerthiprasad (2023) · IEEE International Conference on Technology, Engineering, Management for Societal Impact using Marketing, Entrepreneurship and Talent (TEMSMET) · doi:10.1109/temsmet56707.2023.10150078
“Prior studies have been specified if the bone is assumed to be orthotropic or anisotropic in nature, it is necessary to utilize the properties of isotropic material for the stress analysis of vonmisses for strong bone for the yield strain of uniaxial for lower-leg [22-23].”
BackgroundGupta, S., Saviour, C. M., Pal, B., Chanda, S., & Mukherjee, K. (2025) · Springer eBooks · doi:10.1007/978-981-96-0586-6_5
Metadata
- Authors
- Chang, W. C. W., Christensen, T. M., Pinilla, T. P., & Keaveny, T. M.
- Affiliations
- University of California, Berkeley (US)
- University of California, San Francisco (US)
- Corresponding author
- Chang, Wesley C. W.
- Christensen, Tennille M.
- ORCID
- Keaveny, Tony M.
- Venue
- Journal of Orthopaedic Research
- Publisher
- Wiley
- Published
- 1999-07
- Volume
- 17
- Issue
- 4
- Pages
- 582-585
- ISSN
- 0736-0266 (ISSN-L)
- 1554-527X
- OpenAlex
- W2003769430
- Cited by
- 77
- References
- 27
- Citations by year
- 2025: 2 · 2024: 2 · 2023: 1 · 2022: 1 · 2021: 1 · 2020: 4 · 2019: 1 · 2018: 4 · 2016: 2 · 2015: 4 · 2014: 4 · 2013: 2 · 2012: 2
- FWCI
- 4.10
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Journal of Orthopaedic Research® (publishedVersion)
- PubMed (publishedVersion)
- Funders
- National Institute of Arthritis and Musculoskeletal and Skin Diseases (AR-43784, R01AR043784)
- Topics
- Health Sciences › Medicine › Orthopedics and Sports Medicine › Bone health and osteoporosis research
- Health Sciences › Medicine › Orthopedics and Sports Medicine › Bone fractures and treatments
- Physical Sciences › Engineering › Biomedical Engineering › Elasticity and Material Modeling
- Keywords
- trabecular bone, yield strain, isotropy, anisotropy, bovine tibia, uniaxial loading, trabecular orientation, bone mechanical properties
- MeSH terms
- Animals, Biomechanical Phenomena, Cattle, Tibia
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.