The DOI matches its Crossref record; 176 of the 176 references it cites were found in a registry or an index.
The Future of Pharmaceutical Manufacturing Sciences
Open accessAbstract
The entire pharmaceutical sector is in an urgent need of both innovative technological solutions and fundamental scientific work, enabling the production of highly engineered drug products. Commercial-scale manufacturing of complex drug delivery systems (DDSs) using the existing technologies is challenging. This review covers important elements of manufacturing sciences, beginning with risk management strategies and design of experiments (DoE) techniques. Experimental techniques should, where possible, be supported by computational approaches. With that regard, state-of-art mechanistic process modeling techniques are described in detail. Implementation of materials science tools paves the way to molecular-based processing of future DDSs. A snapshot of some of the existing tools is presented. Additionally, general engineering principles are discussed covering process measurement and process control solutions. Last part of the review addresses future manufacturing solutions, covering continuous processing and, specifically, hot-melt processing and printing-based technologies. Finally, challenges related to implementing these technologies as a part of future health care systems are discussed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
LATTICE BOLTZMANN METHOD FOR FLUID FLOWS
Chen, S., & Doolen, G. D. (1998) · Annual Review of Fluid Mechanics · doi:10.1146/annurev.fluid.30.1.329 · Cited by 7,314
A New Initiative on Precision Medicine
Collins, F. S., & Varmus, H. (2015) · New England Journal of Medicine · doi:10.1056/nejmp1500523 · Cited by 5,202
On the quantitative definition of risk
Kaplan, S., & Garrick, B. J. (1981) · Risk Analysis · doi:10.1111/j.1539-6924.1981.tb01350.x · Cited by 3,103
Multiphase Flows with Droplets and Particles
Crowe, C. T., Schwarzkopf, J. D., Sommerfeld, M., & Tsuji, Y. (2011) · doi:10.1201/b11103 · Cited by 3,076
Lun, C. K. K., Savage, S. B., Jeffrey, D. J., & Chepurniy, N. (1984) · Journal of Fluid Mechanics · doi:10.1017/s0022112084000586 · Cited by 3,067
Review of the most common pre-processing techniques for near-infrared spectra
Rinnan, Å., Berg, F. V. D., & Engelsen, S. B. (2009) · TrAC Trends in Analytical Chemistry · doi:10.1016/j.trac.2009.07.007 · Cited by 3,057
PARAFAC. Tutorial and applications
Bro, R. (1997) · Chemometrics and Intelligent Laboratory Systems · doi:10.1016/s0169-7439(97)00032-4 · Cited by 2,814
Ladd, A. J. C. (1994) · Journal of Fluid Mechanics · doi:10.1017/s0022112094001771 · Cited by 2,461
A front-tracking method for viscous, incompressible, multi-fluid flows
Unverdi, S. O., & Tryggvason, G. (1992) · Journal of Computational Physics · doi:10.1016/0021-9991(92)90307-k · Cited by 2,387
Fluid Mechanical Description of Fluidized Beds. Equations of Motion
Anderson, T. B., & Jackson, R. (1967) · Industrial & Engineering Chemistry Fundamentals · doi:10.1021/i160024a007 · Cited by 2,066
Overcoming the challenges in administering biopharmaceuticals: Formulation and delivery strategies
Mitragotri, S., Burke, P. A., & Langer, R. (2014) · Nature Reviews Drug Discovery · doi:10.1038/nrd4363 · Cited by 1,702
Some problems in particle technology
Hulburt, H. M., & Katz, S. (1964) · Chemical Engineering Science · doi:10.1016/0009-2509(64)85047-8 · Cited by 1,670
Nanosuspensions in drug delivery
Rabinow, B. E. (2004) · Nature Reviews Drug Discovery · doi:10.1038/nrd1494 · Cited by 1,524
Failure Mode and Effect Analysis: FMEA From Theory to Execution
Schneider, H. (1996) · Technometrics · doi:10.1080/00401706.1996.10484424 · Cited by 1,493
Understanding pharmaceutical quality by design
Yu, L. X., Amidon, G., Khan, M. A., Hoag, S. W., Polli, J., Raju, G. K., & Woodcock, J. (2014) · The AAPS Journal · doi:10.1208/s12248-014-9598-3 · Cited by 1,475
Brady, J. F., & Bossis, G. (1988) · Annual Review of Fluid Mechanics · doi:10.1146/annurev.fl.20.010188.000551 · Cited by 1,469
Andersson, C. A., & Bro, R. (2000) · Chemometrics and Intelligent Laboratory Systems · doi:10.1016/s0169-7439(00)00071-x · Cited by 1,229
Point of Care Diagnostics: Status and Future
Gubala, V., Harris, L. F., Ricco, A. J., Tan, M. X., & Williams, D. E. (2012) · Analytical Chemistry · doi:10.1021/ac2030199 · Cited by 1,194
Pharmaceutical Quality by Design: Product and Process Development, Understanding, and Control
Yu, L. X. (2008) · Pharmaceutical Research · doi:10.1007/s11095-007-9511-1 · Cited by 1,191
Lattice-Boltzmann Simulations of Particle-Fluid Suspensions
Ladd, A. J. C., & Verberg, R. (2001) · Journal of Statistical Physics · doi:10.1023/a:1010414013942 · Cited by 1,178
Experimental design and optimization
Lundstedt, T., Seifert, E., Abramo, L., Thelin, B., Nyström, Å., Pettersen, J., & Bergman, R. (1998) · Chemometrics and Intelligent Laboratory Systems · doi:10.1016/s0169-7439(98)00065-3 · Cited by 1,174
Robust model predictive control: A survey
Bemporad, A., & Morari, M. (2007) · Lecture Notes in Control and Information Sciences · doi:10.1007/bfb0109870 · Cited by 1,066
Hoomans, B. P. B., Kuipers, J. A. M., Briels, W. J., & van Swaaij, W. P. M. (1996) · Chemical Engineering Science · doi:10.1016/0009-2509(95)00271-5 · Cited by 1,019
Advanced materials and processing for drug delivery: The past and the future
Zhang, Y., Chan, H. F., & Leong, K. W. (2013) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2012.10.003 · Cited by 1,000
Deciding Whether To Go with the Flow: Evaluating the Merits of Flow Reactors for Synthesis
Hartman, R. L., McMullen, J. P., & Jensen, K. F. (2011) · Angewandte Chemie International Edition · doi:10.1002/anie.201004637 · Cited by 999
Supersaturating Drug Delivery Systems: The Answer to Solubility-Limited Oral Bioavailability?
Brouwers, J., Brewster, M. E., & Augustijns, P. (2009) · Journal of Pharmaceutical Sciences · doi:10.1002/jps.21650 · Cited by 947
Computational Models for Turbulent Reacting Flows
Fox, R. O. (2003) · Cambridge University Press eBooks · doi:10.1017/cbo9780511610103 · Cited by 932
Discrete particle simulation of particle–fluid flow: model formulations and their applicability
ZHOU, Z. Y., KUANG, S. B., CHU, K. W., & YU, A. B. (2010) · Journal of Fluid Mechanics · doi:10.1017/s002211201000306x · Cited by 921
FLUID MECHANICS AND RHEOLOGY OF DENSE SUSPENSIONS
Stickel, J. J., & Powell, R. L. (2005) · Annual Review of Fluid Mechanics · doi:10.1146/annurev.fluid.36.050802.122132 · Cited by 903
Modernizing Pharmaceutical Manufacturing: from Batch to Continuous Production
Lee, S. L., O’Connor, T. F., Yang, X., Cruz, C. N., Chatterjee, S., Madurawe, R. D., Moore, C. M. V., Yu, L. X., & Woodcock, J. (2015) · Journal of Pharmaceutical Innovation · doi:10.1007/s12247-015-9215-8 · Cited by 877
Quality by design for biopharmaceuticals
Rathore, A. S., & Winkle, H. (2009) · Nature Biotechnology · doi:10.1038/nbt0109-26 · Cited by 830
Near-wall turbulence closure modeling without “damping functions”
Durbin, P. A. (1991) · Theoretical and Computational Fluid Dynamics · doi:10.1007/bf00271513 · Cited by 818
The role of meso-scale structures in rapid gas–solid flows
Agrawal, K., Loezos, P. N., Syamlal, M., & Sundaresan, S. (2001) · Journal of Fluid Mechanics · doi:10.1017/s0022112001005663 · Cited by 759
New simple correlation formula for the drag coefficient of non-spherical particles
Hölzer, A., & Sommerfeld, M. (2008) · Powder Technology · doi:10.1016/j.powtec.2007.08.021 · Cited by 753
Risk Management Principles and Guidelines
Luko, S. N. (2013) · Quality Engineering · doi:10.1080/08982112.2013.814508 · Cited by 750
Melt extrusion: from process to drug delivery technology
Breitenbach, J. (2002) · European Journal of Pharmaceutics and Biopharmaceutics · doi:10.1016/s0939-6411(02)00061-9 · Cited by 742
Lagrangian Properties of Particles in Turbulence
Toschi, F., & Bodenschatz, E. (2009) · Annual Review of Fluid Mechanics · doi:10.1146/annurev.fluid.010908.165210 · Cited by 742
Mascia, S., Heider, P. L., Zhang, H., Lakerveld, R., Benyahia, B., Barton, P. I., Braatz, R. D., Cooney, C. L., Evans, J. M. B., Jamison, T. F., et al. (2013) · Angewandte Chemie International Edition · doi:10.1002/anie.201305429 · Cited by 599
Bubble-Size distributions and flow fields in bubble columns
Lehr, F., Millies, M., & Mewes, D. (2002) · AIChE Journal · doi:10.1002/aic.690481103 · Cited by 567
De Beer, T., Burggraeve, A., Fonteyne, M., Saerens, L., Remon, J. P., & Vervaet, C. (2011) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2010.12.012 · Cited by 559
Quality by Design in Biopharmaceuticals
Yang, H. (2016) · doi:10.1201/9781315371726-7 · Cited by 543
Nanotheranostics for personalized medicine
Mura, S., & Couvreur, P. (2012) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2012.06.006 · Cited by 527
A robust near-wall elliptic-relaxation eddy-viscosity turbulence model for CFD
Hanjalić, K., Popovac, M., & Hadžiabdić, M. (2004) · International Journal of Heat and Fluid Flow · doi:10.1016/j.ijheatfluidflow.2004.07.005 · Cited by 525
HOEF, M. A. V. D., BEETSTRA, R., & KUIPERS, J. A. M. (2005) · Journal of Fluid Mechanics · doi:10.1017/s0022112004003295 · Cited by 515
Desktop 3D printing of controlled release pharmaceutical bilayer tablets
Khaled, S. A., Burley, J. C., Alexander, M. R., & Roberts, C. J. (2014) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2013.11.021 · Cited by 511
The lattice Boltzmann equation: A new tool for computational fluid-dynamics
Succi, S., Benzi, R., & Higuera, F. (1991) · Physica D: Nonlinear Phenomena · doi:10.1016/0167-2789(91)90292-h · Cited by 499
Moderate-Reynolds-number flows in ordered and random arrays of spheres
Hill, R. J., Koch, D. L., & Ladd, A. J. C. (2001) · Journal of Fluid Mechanics · doi:10.1017/s0022112001005936 · Cited by 494
Accelerated Stokesian Dynamics simulations
Sierou, A., & Brady, J. F. (2001) · Journal of Fluid Mechanics · doi:10.1017/s0022112001005912 · Cited by 491
Emerging trends in the stabilization of amorphous drugs
Laitinen, R., Löbmann, K., Strachan, C. J., Grohganz, H., & Rades, T. (2013) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2012.04.066 · Cited by 470
Tenneti, S., Garg, R., & Subramaniam, S. (2011) · International Journal of Multiphase Flow · doi:10.1016/j.ijmultiphaseflow.2011.05.010 · Cited by 459
Production methods for nanodrug particles using the bottom-up approach
Chan, H.-K., & Kwok, P. C. L. (2011) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2011.03.011 · Cited by 451
Assessment of Recent Process Analytical Technology (PAT) Trends: A Multiauthor Review
Simon, L. L., Pataki, H., Marosi, G., Meemken, F., Hungerbühler, K., Baiker, A., Tummala, S., Glennon, B., Kuentz, M., Steele, G., et al. (2015) · Organic Process Research & Development · doi:10.1021/op500261y · Cited by 439
Favier, J. F., Abbaspour-Fard, M. H., Kremmer, M., & Raji, A. O. (1999) · Engineering Computations · doi:10.1108/02644409910271894 · Cited by 431
Centering and scaling in component analysis
Bro, R., & Smilde, A. K. (2003) · Journal of Chemometrics · doi:10.1002/cem.773 · Cited by 428
The first effects of fluid inertia on flows in ordered and random arrays of spheres
Hill, R. J., Koch, D. L., & Ladd, A. J. C. (2001) · Journal of Fluid Mechanics · doi:10.1017/s0022112001005948 · Cited by 422
Towards crystal structure prediction of complex organic compounds – a report on the fifth blind test
Bardwell, D. A., Adjiman, C. S., Arnautova, Y. A., Bartashevich, E., Boerrigter, S. X. M., Braun, D. E., Cruz-Cabeza, A. J., Day, G. M., Della Valle, R. G., Desiraju, G. R., et al. (2011) · Acta Crystallographica Section B Structural Science · doi:10.1107/s0108768111042868 · Cited by 422
Large eddy simulations on the flow driven by a Rushton turbine
Derksen, J., & Van den Akker, H. E. A. (1999) · AIChE Journal · doi:10.1002/aic.690450202 · Cited by 344
Large eddy simulation of the Gas–Liquid flow in a square cross-sectioned bubble column
Deen, N. G., Solberg, T., & Hjertager, B. H. (2001) · Chemical Engineering Science · doi:10.1016/s0009-2509(01)00249-4 · Cited by 341
Continuous downstream processing of biopharmaceuticals
Jungbauer, A. (2013) · Trends in Biotechnology · doi:10.1016/j.tibtech.2013.05.011 · Cited by 325
Applications of process analytical technology to crystallization processes
Yu, L. (2004) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2003.10.012 · Cited by 323
Bridging the rheology of granular flows in three regimes
Chialvo, S., Sun, J., & Sundaresan, S. (2012) · Physical Review E · doi:10.1103/physreve.85.021305 · Cited by 316
Dynamic simulation of dispersed gas-liquid two-phase flow using a discrete bubble model
Delnoij, E., Lammers, F. A., Kuipers, J. A. M., & van Swaaij, W. P. M. (1997) · Chemical Engineering Science · doi:10.1016/s0009-2509(96)00515-5 · Cited by 314
Industrial lab-on-a-chip: Design, applications and scale-up for drug discovery and delivery
Vladisavljević, G. T., Khalid, N., Neves, M. A., Kuroiwa, T., Nakajima, M., Uemura, K., Ichikawa, S., & Kobayashi, I. (2013) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2013.07.017 · Cited by 313
White Paper on Continuous Bioprocessing May 20–21 2014 Continuous Manufacturing Symposium
Konstantinov, K. B., & Cooney, C. L. (2015) · Journal of Pharmaceutical Sciences · doi:10.1002/jps.24268 · Cited by 306
Solid form screening – A review
AALTONEN, J., ALLESO, M., MIRZA, S., KORADIA, V, GORDON, K., & RANTANEN, J. (2009) · European Journal of Pharmaceutics and Biopharmaceutics · doi:10.1016/j.ejpb.2008.07.014 · Cited by 276
Self-citationProcess Modeling in the Pharmaceutical Industry using the Discrete Element Method
Ketterhagen, W. R., am Ende, M. T., & Hancock, B. C. (2009) · Journal of Pharmaceutical Sciences · doi:10.1002/jps.21466 · Cited by 249
A functional subgrid drift velocity model for filtered drag prediction in dense fluidized bed
Parmentier, J., Simonin, O., & Delsart, O. (2012) · AIChE Journal · doi:10.1002/aic.12647 · Cited by 247
Near-infrared spectroscopy in the pharmaceutical industry
Blanco, M., Coello, J., Iturriaga, H., Maspoch, S., & de la Pezuela, C. (1998) · The Analyst · doi:10.1039/a802531b · Cited by 239
Snead, D. R., & Jamison, T. F. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201409093 · Cited by 225
Callis, J. B., Illman, D. L., & Kowalski, B. R. (1987) · Analytical Chemistry · doi:10.1021/ac00136a001 · Cited by 224
Population balance modeling. Promise for the future
Ramkrishna, D., & Mahoney, A. W. (2002) · Chemical Engineering Science · doi:10.1016/s0009-2509(01)00386-4 · Cited by 220
Lattice Boltzmann simulations to determine drag, lift and torque acting on non-spherical particles
Hölzer, A., & Sommerfeld, M. (2009) · Computers & Fluids · doi:10.1016/j.compfluid.2008.06.001 · Cited by 218
Assessment of Model Formulations in the Discrete Particle Simulation of Gas−Solid Flow
Feng, Y. Q., & Yu, A. B. (2004) · Industrial & Engineering Chemistry Research · doi:10.1021/ie049387v · Cited by 213
Numerical simulation of solids suspension in a stirred tank
Derksen, J. J. (2003) · AIChE Journal · doi:10.1002/aic.690491104 · Cited by 213
Pardeike, J., Strohmeier, D. M., Schrödl, N., Voura, C., Gruber, M., Khinast, J. G., & Zimmer, A. (2011) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2011.08.033 · Cited by 204
Self-citationWorkman, Koch, M., & Veltkamp, D. (2005) · Analytical Chemistry · doi:10.1021/ac050620o · Cited by 203
Kaplan, S., Haimes, Y. Y., & Garrick, B. J. (2001) · Risk Analysis · doi:10.1111/0272-4332.215153 · Cited by 199
Experimental investigations and modelling of the ball motion in planetary ball mills
Rosenkranz, S., Breitung-Faes, S., & Kwade, A. (2011) · Powder Technology · doi:10.1016/j.powtec.2011.05.021 · Cited by 194
Rheology as a tool for evaluation of melt processability of innovative dosage forms
Aho, J., Boetker, J. P., Baldursdottir, S., & Rantanen, J. (2015) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2015.02.009 · Cited by 191
Self-citationTowards fabrication of 3D printed medical devices to prevent biofilm formation
Sandler, N., Salmela, I., Fallarero, A., Rosling, A., Khajeheian, M., Kolakovic, R., Genina, N., Nyman, J., & Vuorela, P. (2014) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2013.11.001 · Cited by 184
Dynamics of gas–solid fluidised beds with non-spherical particle geometry
Hilton, J. E., Mason, L. R., & Cleary, P. W. (2010) · Chemical Engineering Science · doi:10.1016/j.ces.2009.10.028 · Cited by 184
Constitutive Models for Filtered Two-Fluid Models of Fluidized Gas–Particle Flows
Igci, Y., & Sundaresan, S. (2011) · Industrial & Engineering Chemistry Research · doi:10.1021/ie200190q · Cited by 184
Large-scale powder mixer simulations using massively parallel GPUarchitectures
Radeke, C. A., Glasser, B. J., & Khinast, J. G. (2010) · Chemical Engineering Science · doi:10.1016/j.ces.2010.09.035 · Cited by 183
Self-citationAllison, G., Cain, Y. T., Cooney, C., Garcia, T., Bizjak, T. G., Holte, O., Jagota, N., Komas, B., Korakianiti, E., Kourti, D., et al. (2015) · Journal of Pharmaceutical Sciences · doi:10.1002/jps.24324 · Cited by 181
Boukouvala, F., Niotis, V., Ramachandran, R., Muzzio, F. J., & Ierapetritou, M. G. (2012) · Computers & Chemical Engineering · doi:10.1016/j.compchemeng.2012.02.015 · Cited by 178
In-vitro tomography and non-destructive imaging at depth of pharmaceutical solid dosage forms
ZEITLER, J., & GLADDEN, L. (2009) · European Journal of Pharmaceutics and Biopharmaceutics · doi:10.1016/j.ejpb.2008.08.012 · Cited by 177
A constitutive model with microstructure evolution for flow of rate-independent granular materials
SUN, J., & SUNDARESAN, S. (2011) · Journal of Fluid Mechanics · doi:10.1017/jfm.2011.251 · Cited by 175
Clarke, F. C., Jamieson, M. J., Clark, D. A., Hammond, S. V., Jee, R. D., & Moffat, A. C. (2001) · Analytical Chemistry · doi:10.1021/ac001327l · Cited by 166
The influence of DEM simulation parameters on the particle behaviour in a V-mixer
Kuo, H. P., Knight, P. C., Parker, D. J., Tsuji, Y., Adams, M. J., & Seville, J. P. K. (2002) · Chemical Engineering Science · doi:10.1016/s0009-2509(02)00086-6 · Cited by 165
Baxendale, I. R., Braatz, R. D., Hodnett, B. K., Jensen, K. F., Johnson, M. D., Sharratt, P., Sherlock, J., & Florence, A. J. (2014) · Journal of Pharmaceutical Sciences · doi:10.1002/jps.24252 · Cited by 163
Mixing characteristics of wet granular matter in a bladed mixer
Radl, S., Kalvoda, E., Glasser, B. J., & Khinast, J. (2010) · Powder Technology · doi:10.1016/j.powtec.2010.02.022 · Cited by 155
Self-citationApplication of Neural Computing in Pharmaceutical Product Development
Hussain, A. S., Yu, X., & Johnson, R. D. (1991) · Pharmaceutical Research · doi:10.1023/a:1015843527138 · Cited by 152
Lee, J.-Y., Choi, B., Wu, B. M., & Lee, M. (2013) · Biofabrication · doi:10.1088/1758-5082/5/4/045003 · Cited by 149
Injection Molding and its application to drug delivery
Zema, L., Loreti, G., Melocchi, A., Maroni, A., & Gazzaniga, A. (2012) · Journal of Controlled Release · doi:10.1016/j.jconrel.2012.01.001 · Cited by 147
Setting the bar for powder flow properties in successful high speed tableting
Sun, C. C. (2010) · Powder Technology · doi:10.1016/j.powtec.2010.03.011 · Cited by 142
Ghislieri, D., Gilmore, K. M., & Seeberger, P. H. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201409765 · Cited by 140
Crystal Engineering and Particle Design for the Powder Compaction Process
York, P. (1992) · Drug Development and Industrial Pharmacy · doi:10.3109/03639049209058558 · Cited by 139
Mass transfer and chemical reactions in bubble swarms with dynamic interfaces
Koynov, A. A., Khinast, J., & Tryggvason, G. (2005) · AIChE Journal · doi:10.1002/aic.10529 · Cited by 138
Self-citationSpecialized Solid Form Screening Techniques
Newman, A. W. (2012) · Organic Process Research & Development · doi:10.1021/op300241f · Cited by 137
Srai, J. S., Badman, C., Krumme, M., Futran, M., & Johnston, C. A. (2015) · Journal of Pharmaceutical Sciences · doi:10.1002/jps.24343 · Cited by 135
Artificial Neural Network as a Novel Method to Optimize Pharmaceutical Formulations
Takayama, K., Fujikawa, M., & Nagai, T. (1999) · Pharmaceutical Research · doi:10.1023/a:1011986823850 · Cited by 134
Microdynamic analysis of the particle flow in a cylindrical bladed mixer
Zhou, Y. C., Yu, A., Stewart, R. L., & Bridgwater, J. (2004) · Chemical Engineering Science · doi:10.1016/j.ces.2003.12.023 · Cited by 133
Design challenges for secure implantable medical devices
Burleson, W. P., Clark, S. S., Ransford, B., & Fu, K. E. (2012) · ACM/IEEE Design Automation Conference (DAC) · doi:10.1145/2228360.2228364 · Cited by 133
Kumar, A., Gernaey, K. V., Beer, T. D., & Ingmar Nopens, A. (2013) · European Journal of Pharmaceutics and Biopharmaceutics · doi:10.1016/j.ejpb.2013.09.013 · Cited by 131
Analysis of the surface energy of pharmaceutical powders by inverse gas chromatography
Grimsey, I. M., Feeley, J. C., & York, P. (2002) · Journal of Pharmaceutical Sciences · doi:10.1002/jps.10060 · Cited by 131
Modeling and simulation of crystallization processes using parsival
Wulkow, M., Gerstlauer, A., & Nieken, U. (2001) · Chemical Engineering Science · doi:10.1016/s0009-2509(00)00432-2 · Cited by 128
Printing technologies in fabrication of drug delivery systems
Kolakovic, R., Viitala, T., Ihalainen, P., Genina, N., Peltonen, J. P. K., & Sandler, N. (2013) · Expert Opinion on Drug Delivery · doi:10.1517/17425247.2013.859134 · Cited by 126
Adam, S., Suzzi, D., Radeke, C. A., & Khinast, J. (2010) · European Journal of Pharmaceutical Sciences · doi:10.1016/j.ejps.2010.10.013 · Cited by 123
Self-citationData processing of vibrational chemical imaging for pharmaceutical applications
Sacré, P., Bleye, C. D., Chavez, P.-F., Netchacovitch, L., Hubert, P., & Ziémons, E. (2014) · Journal of Pharmaceutical and Biomedical Analysis · doi:10.1016/j.jpba.2014.04.012 · Cited by 116
Myerson, A. S., Krumme, M., Nasr, M. M., Thomas, H., & Braatz, R. D. (2014) · Journal of Pharmaceutical Sciences · doi:10.1002/jps.24311 · Cited by 116
Characterization of different laser irradiation methods for quantitative Raman tablet assessment
Johansson, J., Pettersson, S., & Folestad, S. (2005) · Journal of Pharmaceutical and Biomedical Analysis · doi:10.1016/j.jpba.2005.04.029 · Cited by 115
Zhou, C., Qi, W., Lewis, E. N., & Carpenter, J. F. (2014) · Analytical Biochemistry · doi:10.1016/j.ab.2014.11.016 · Cited by 112
Snead, D. R., & Jamison, T. F. (2013) · Chemical Science · doi:10.1039/c3sc50859e · Cited by 109
Novel Platforms for Oral Drug Delivery
Colombo, P., Sonvico, F., Colombo, G., & Bettini, R. (2009) · Pharmaceutical Research · doi:10.1007/s11095-008-9803-0 · Cited by 108
Workman, J., Lavine, B. K., Chrisman, R. W., et al. (2011) · Analytical Chemistry · doi:10.1021/ac200974w · Cited by 106
Singh, R., Sahay, A., Karry, K. M., Muzzio, F. J., Ierapetritou, M., & Ramachnadran, R. (2014) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2014.06.045 · Cited by 105
Model‐based design of a plant‐wide control strategy for a continuous pharmaceutical plant
Lakerveld, R., Benyahia, B., Braatz, R. D., et al. (2013) · AIChE Journal · doi:10.1002/aic.14107 · Cited by 101
Controlled Nucleation from Solution Using Polymer Microgels
Diao, Y., Helgeson, M. E., Myerson, A. S., Hatton, T. A., Doyle, P. S., & Trout, B. L. (2011) · Journal of the American Chemical Society · doi:10.1021/ja110801g · Cited by 98
Kim, M. S., & Lee, W. I. (2003) · International Journal for Numerical Methods in Fluids · doi:10.1002/fld.553 · Cited by 91
CFD modeling of slurry bubble column reactors for Fisher–Tropsch synthesis
Troshko, A. A., & Zdravistch, F. (2008) · Chemical Engineering Science · doi:10.1016/j.ces.2008.10.022 · Cited by 88
Why is Inline NMR Rarely Used as Industrial Sensor? Challenges and Opportunities
Colnago, L. A., de Andrade, F. D., de Souza, A. A., Azeredo, R. B. D. V., Lima, A. A., Cerioni, L. M. C., Osán, T. M., & Pusiol, D. J. (2014) · Chemical Engineering & Technology · doi:10.1002/ceat.201300380 · Cited by 88
Process monitoring and visualization solutions for hot-melt extrusion: a review
Saerens, L., Vervaet, C., Remon, J. P., & Beer, T. D. (2013) · Journal of Pharmacy and Pharmacology · doi:10.1111/jphp.12123 · Cited by 84
Green, R. L., Thurau, G., Pixley, N. C., Mateos, A. G., Reed, R. A., & Higgins, J. P. (2005) · Analytical Chemistry · doi:10.1021/ac050272q · Cited by 83
Effective Sample Size in Diffuse Reflectance Near-IR Spectrometry
Berntsson, O., Burger, T., Folestad, S., Danielsson, L., Kuhn, J., & Fricke, J. (1999) · Analytical Chemistry · doi:10.1021/ac980652u · Cited by 83
A multi-dimensional population balance model approach to continuous powder mixing processes
Sen, M., & Ramachnadran, R. (2012) · Advanced Powder Technology · doi:10.1016/j.apt.2012.02.001 · Cited by 77
(2010) · Nature · doi:10.1038/464649a · Cited by 76
The Biopharmaceutics Risk Assessment Roadmap for Optimizing Clinical Drug Product Performance
Selen, A., Dickinson, P. A., Müllertz, A., Crison, J. R., Mistry, H. B., Cruañes, M. T., Martinez, M. N., Lennernäs, H., Wigal, T. L., Swinney, D. C., et al. (2014) · Journal of Pharmaceutical Sciences · doi:10.1002/jps.24162 · Cited by 75
Insights into the Early Dissolution Events of Amlodipine Using UV Imaging and Raman Spectroscopy
Boetker, J. P., Savolainen, M., Koradia, V., Tian, F., Rades, T., Müllertz, A., Cornett, C., Rantanen, J., & Østergaard, J. (2011) · Molecular Pharmaceutics · doi:10.1021/mp200205z · Cited by 73
Self-citationModelling of Particulate Processes
Kraft, M. (2005) · KONA Powder and Particle Journal · doi:10.14356/kona.2005007 · Cited by 72
Sun, X., Sakai, M., Sakai, M.-T., & Yamada, Y. (2014) · Chemical Engineering Journal · doi:10.1016/j.cej.2014.02.049 · Cited by 72
Aksu, B., Beer, T. D., Folestad, S., Ketolainen, J., Lindén, H. H., Lopes, J. A., de Matas, M., Oostra, W., Rantanen, J., & Weimer, M. (2012) · European Journal of Pharmaceutical Sciences · doi:10.1016/j.ejps.2012.06.009 · Cited by 72
Self-citationDevelopment of sustained-release lipophilic calcium stearate pellets via hot melt extrusion
Roblegg, E., Jäger, E., Hodžić, A., Koscher, G., Mohr, S., Zimmer, A., & Khinast, J. (2011) · European Journal of Pharmaceutics and Biopharmaceutics · doi:10.1016/j.ejpb.2011.07.004 · Cited by 72
Self-citationThe advantages by the use of neural networks in modelling the fluidized bed granulation process
Murtoniemi, E., Yliruusi, J. K., Kinnunen, P., et al. (1994) · International Journal of Pharmaceutics · doi:10.1016/0378-5173(94)90327-1 · Cited by 70
Inline monitoring and a PAT strategy for pharmaceutical hot melt extrusion
Wahl, P. R., Treffer, D. F., Mohr, S., Roblegg, E., Koscher, G., & Khinast, J. (2013) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2013.07.044 · Cited by 70
Self-citationFreireich, B. J., Li, J., Litster, J., & Wassgren, C. R. (2011) · Chemical Engineering Science · doi:10.1016/j.ces.2011.04.015 · Cited by 69
Bai, G., Bee, J. S., Biddlecombe, J. G., Chen, Q., & Leach, W. T. (2011) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2011.11.044 · Cited by 69
Study of parameters important in the spheronisation process
Baert, L., Vermeersch, H., Remon, J. P., Smeyers-Verbeke, J., & Massart, D. L. (1993) · International Journal of Pharmaceutics · doi:10.1016/0378-5173(93)90231-4 · Cited by 69
Boukouvala, F., Chaudhury, A., Sen, M., Zhou, R., Mioduszewski, Ł., Ierapetritou, M., & Ramachnadran, R. (2013) · Journal of Pharmaceutical Innovation · doi:10.1007/s12247-012-9143-9 · Cited by 68
Monitoring Blending of Pharmaceutical Powders with Multipoint NIR Spectroscopy
Scheibelhofer, O., Balak, N., Wahl, P. R., Koller, D. M., Glasser, B. J., & Khinast, J. (2012) · AAPS PharmSciTech · doi:10.1208/s12249-012-9910-4 · Cited by 65
Self-citationSupervisory Control System for Monitoring a Pharmaceutical Hot Melt Extrusion Process
Markl, D., Wahl, P. R., de Menezes, J. C., Koller, D. M., Kavsek, B., François, K., Roblegg, E., & Khinast, J. (2013) · AAPS PharmSciTech · doi:10.1208/s12249-013-9992-7 · Cited by 64
Self-citationWhat happened to personalized medicine?
(2012) · Nature Biotechnology · doi:10.1038/nbt.2096 · Cited by 64
Vanarase, A. U., Järvinen, M. A., Paaso, J., & Muzzio, F. J. (2013) · Powder Technology · doi:10.1016/j.powtec.2013.02.012 · Cited by 63
Flow and mass transfer of fully resolved bubbles in non‐Newtonian fluids
Radl, S., Tryggvason, G., & Khinast, J. (2007) · AIChE Journal · doi:10.1002/aic.11211 · Cited by 63
Self-citationSingh, R., Barrasso, D., Chaudhury, A., Sen, M., Ierapetritou, M., & Ramachnadran, R. (2014) · Journal of Pharmaceutical Innovation · doi:10.1007/s12247-014-9170-9 · Cited by 61
Effect of Particle Clusters on Carrier Flow Turbulence: A Direct Numerical Simulation Study
Xu, Y., & Subramaniam, S. (2010) · Flow Turbulence and Combustion · doi:10.1007/s10494-010-9298-8 · Cited by 61
Khinast, J., Baumgartner, R., & Roblegg, E. (2013) · AAPS PharmSciTech · doi:10.1208/s12249-013-9946-0 · Cited by 61
Self-citationLarge Eddy Simulation of mixing and reaction in a Confined Impinging Jets Reactor
Marchisio, D. L. (2008) · Computers & Chemical Engineering · doi:10.1016/j.compchemeng.2008.11.009 · Cited by 60
Kauppinen, A., Toiviainen, M., Korhonen, O., Aaltonen, J., Järvinen, K., Paaso, J., Juuti, M., & Ketolainen, J. (2013) · Analytical Chemistry · doi:10.1021/ac303403p · Cited by 56
Pharmaceutical applications of dynamic mechanical thermal analysis
Jones, D. S., Tian, Y., Diak, O. A., & Andrews, G. P. (2011) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2011.12.002 · Cited by 54
Jain, D., Deen, N. G., Kuipers, J. A. M., Antonyuk, S. I., & Heinrich, S. (2011) · Chemical Engineering Science · doi:10.1016/j.ces.2011.11.018 · Cited by 53
Boukouvala, F., Dubey, A., Vanarase, A. U., Ramachnadran, R., Muzzio, F. J., & Ierapetritou, M. (2011) · Macromolecular Materials and Engineering · doi:10.1002/mame.201100054 · Cited by 52
Shi, Z., & Anderson, C. A. (2010) · Journal of Pharmaceutical Sciences · doi:10.1002/jps.22228 · Cited by 51
Electrostatic measurements on a miniaturized fluidized bed
Murtomaa, M., Räsänen, E., Rantanen, J., et al. (2002) · Journal of Electrostatics · doi:10.1016/s0304-3886(02)00121-3 · Cited by 50
Self-citationIdentification of models for control of wet granulation
Sanders, C., Hounslow, M. J., & Doyle, F. J. (2008) · Powder Technology · doi:10.1016/j.powtec.2008.05.005 · Cited by 48
Photoacoustic evaluation of elasticity and integrity of pharmaceutical tablets
Ketolainen, J., Oksanen, M., Rantala, J., Stor-Pellinen, J., LUUKKALA, M., & Paronen, P. (1995) · International Journal of Pharmaceutics · doi:10.1016/0378-5173(95)00110-5 · Cited by 47
A microfluidic platform for pharmaceutical salt screening
Thorson, M. R., Goyal, S., Schudel, B. R., Zukoski, C. F., Zhang, G. G. Z., Gong, Y., & Kenis, P. J. A. (2011) · Lab on a Chip · doi:10.1039/c1lc20645a · Cited by 46
An Integrated Approach to Simulation of Pharmaceutical Processes for Solid Drug Manufacture
Rogers, A. J., Inamdar, C., & Ierapetritou, M. (2013) · Industrial & Engineering Chemistry Research · doi:10.1021/ie401344a · Cited by 46
Modeling a seeded continuous crystallizer for the production of active pharmaceutical ingredients
Besenhard, M. O., Hohl, R., Hodžić, A., Eder, R. J.-P., & Khinast, J. (2014) · Crystal Research and Technology · doi:10.1002/crat.201300305 · Cited by 45
Self-citationMatero, S., van den Berg, F. W. J., Poutiainen, S., Rantanen, J., & Pajander, J. P. (2013) · Journal of Pharmaceutical Sciences · doi:10.1002/jps.23472 · Cited by 45
Self-citationIn-line ultrasound measurement system for detecting tablet integrity
Leskinen, J. T. T., Simonaho, S.-P., Hakulinen, M. A., & Ketolainen, J. (2010) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2010.08.038 · Cited by 40
Treffer, D. F., Wahl, P. R., Hörmann, T., Markl, D., Schrank, S., Jones, I., Cruise, P., Mürb, R., Koscher, G., Roblegg, E., et al. (2014) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2014.03.022 · Cited by 40
Self-citationSpatially resolved monitoring of powder mixing processes via multiple NIR-probes
Scheibelhofer, O., Balak, N., Koller, D. M., & Khinast, J. (2013) · Powder Technology · doi:10.1016/j.powtec.2013.03.035 · Cited by 37
Self-citationAdvanced continuum modelling of gas-particle flows beyond the hydrodynamic limit
Passalacqua, A., & Fox, R. O. (2010) · Applied Mathematical Modelling · doi:10.1016/j.apm.2010.09.038 · Cited by 36
Multi-scale pharmaceutical process understanding: From particle to powder to dosage form
Hamad, M. L., Bowman, K. J., Smith, N., Sheng, X., & Morris, K. R. (2010) · Chemical Engineering Science · doi:10.1016/j.ces.2010.01.037 · Cited by 36
Gübitz, B., Schnedl, H., & Khinast, J. (2012) · Expert Systems with Applications · doi:10.1016/j.eswa.2012.01.089 · Cited by 34
Self-citationPage, T., Dubina, H., Fillipi, G., Guidat, R., Patnaik, S., Poechlauer, P., Shering, P., Guinn, M., Mcdonnell, P., & Johnston, C. (2014) · Journal of Pharmaceutical Sciences · doi:10.1002/jps.24282 · Cited by 33
Bro, R., & Jakobsen, M. (2002) · Journal of Chemometrics · doi:10.1002/cem.722 · Cited by 28
Nepveux, K., Sherlock, J., Futran, M., Thien, M. P., & Krumme, M. (2015) · Journal of Pharmaceutical Sciences · doi:10.1002/jps.24286 · Cited by 26
Xia, D., Ouyang, M., Wu, J., Jiang, Y., Piao, H., Sun, S., Li, Z., Rantanen, J., Cui, F., & Yang, M. (2011) · Pharmaceutical Research · doi:10.1007/s11095-011-0522-6 · Cited by 26
Self-citationHot Melt Extrusion as a Continuous Pharmaceutical Manufacturing Process
Treffer, D. F., Wahl, P. R., Markl, D., Koscher, G., Roblegg, E., & Khinast, J. (2013) · AAPS advances in the pharmaceutical sciences series · doi:10.1007/978-1-4614-8432-5_15 · Cited by 23
Self-citationA lattice Boltzmann study on the drag force in bubble swarms
Gillissen, J. J. J., Sundaresan, S., & den Akker, H. E. A. V. (2011) · Journal of Fluid Mechanics · doi:10.1017/jfm.2011.125 · Cited by 21
Labscale fluidized bed granulator instrumented with non-invasive process monitoring devices
Leskinen, J. T. T., Okkonen, M.-A. H., Toiviainen, M., Poutiainen, S., Tenhunen, M., Teppola, P., Lappalainen, R., Ketolainen, J., & Järvinen, K. (2010) · Chemical Engineering Journal · doi:10.1016/j.cej.2010.08.064 · Cited by 19
Modeling the Growth Kinetics of Fluidized‐Bed Spray Granulation
Li, Z., Kind, M., & Grünewald, G. (2011) · Chemical Engineering & Technology · doi:10.1002/ceat.201100046 · Cited by 17
Raijada, D. K., Cornett, C., & Rantanen, J. (2012) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2012.08.025 · Cited by 17
Self-citationPersonalized medicines in late-stage development
Milne, C., Garafalo, S., Bryan, C. D., & McKiernan, M. (2014) · Nature Reviews Drug Discovery · doi:10.1038/nrd4325 · Cited by 14
Smagorinsky (1963) · doi:10.1175/1520-0493(1963)091<0099:gcewtp>2.3.co;2
Cited by
Artificial intelligence in drug discovery and development
Paul, D., Sanap, G., Shenoy, S., Kalyane, D., Kalia, K., & Tekade, R. K. (2021) · Drug Discovery Today · doi:10.1016/j.drudis.2020.10.010 · Cited by 1,695
Tan, D., Loots, L., & Friščić, T. (2016) · Chemical Communications · doi:10.1039/c6cc02015a · Cited by 411
Deep learning in drug discovery: an integrative review and future challenges
Askr, H., Elgeldawi, E., Aboul Ella, H., Elshaier, Y. A. M. M., Gomaa, M. M., & Hassanien, A. E. (2023) · Artificial Intelligence Review · doi:10.1007/s10462-022-10306-1 · Cited by 390
Boyd, B. J., Bergström, C. A. S., Vinarov, Z., Kuentz, M., Brouwers, J., Augustijns, P., Brandl, M., Bernkop-Schnürch, A., Shrestha, N., Préat, V., et al. (2019) · European Journal of Pharmaceutical Sciences · doi:10.1016/j.ejps.2019.104967 · Cited by 367
Artificial Intelligence and Machine Learning Technology Driven Modern Drug Discovery and Development
Sarkar, C., Das, B., Rawat, V. S., Wahlang, J. B., Nongpiur, A., Tiewsoh, I., Lyngdoh, N. M., Das, D., Bidarolli, M., & Sony, H. T. (2023) · International Journal of Molecular Sciences · doi:10.3390/ijms24032026 · Cited by 347
Metadata
- Authors
- Rantanen, J., & Khinast, J.
- Venue
- Journal of Pharmaceutical Sciences
- Publisher
- Elsevier BV
- Published
- 2015-11
- Volume
- 104
- Issue
- 11
- Pages
- 3612-3638
- ISSN
- 0022-3549 (ISSN-L)
- OpenAlex
- W1786404767
- Cited by
- 442
- References
- 176
- FWCI
- 32.60
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.