The DOI matches its Crossref record; 26 of the 26 references it cites were found in a registry or an index.
Crystallization from the melt of poly(lactide)s with different optical purities and their blends
Abstract
Poly(lactide)s (PLA) with different optical purities (OP) were synthesized by copolymerization of D‐lactide and L‐lactide. Crystallization of D‐ and L‐lactide‐rich copolymers before and after 1 : 1 blending was studied from the melt over a wide range of annealing temperatures (T a) using differential scanning calorimetry and polarizing microscopy. Melting temperature and crystallinity increased with an increase in OP for both the non‐blended and the 1 : 1 blended PLAs and they lost their crystallizability when their OP became smaller than 76%, suggesting that the critical isotactic sequence length of PLA for crystallization was approximately 15 isotactic lactate units. Normal spherulite formation was observed for both the non‐blended and the blended PLAs even when the OP of PLAs decreased to 76%, whereas the spherulitic size of the non‐blended PLAs was larger than that of the 1 : 1 blended PLAs when compared at the same OP and Ta. The highest Ta for crystallization increased with increasing OP and was higher for the 1 : 1 blended PLAs than for the non‐blended PLAs at a fixed OP, indicating that the crystallizable Ta range was extended to higher temperature by blending D‐ and L‐lactide‐rich PLAs. This is ascribed to stereocomplex (racemic crystallites) formation at high Ta from the 1 : 1 blended PLAs. Based on these results, the phase diagram for crystallization was depicted for the non‐blended and the 1 : 1 blended PLAs.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Fischer, E. W., Sterzel, H. J., & Wegner, G. (1973) · Kolloid-Zeitschrift und Zeitschrift für Polymere · doi:10.1007/bf01498927 · Cited by 1,704
Stereocomplex formation between enantiomeric poly(lactides)
Ikada, Y., Jamshidi, K., Tsuji, H., & Hyon, S. H. (1987) · Macromolecules · doi:10.1021/ma00170a034 · Cited by 1,409
Self-citationBiodegradable polymers for use in surgery—polyglycolic/poly(actic acid) homo- and copolymers: 1
Gilding, D. K., & Reed, A. M. (1979) · Polymer · doi:10.1016/0032-3861(79)90009-0 · Cited by 1,345
Theory of crystallization in copolymers
Flory, P. J. (1955) · Transactions of the Faraday Society · doi:10.1039/tf9555100848 · Cited by 889
Thermal characterization of polylactides
Jamshidi, K., Hyon, S.-H., & Ikada, Y. (1988) · Polymer · doi:10.1016/0032-3861(88)90116-4 · Cited by 692
Self-citationPreparative Methods of Polymer Chemistry.
Walling, C. (1961) · Journal of the American Chemical Society · doi:10.1021/ja01477a054 · Cited by 629
Biodegradable materials of poly(l-lactic acid): 1. Melt-spun and solution-spun fibres
Eling, B., Gogolewski, S., & Pennings, A. J. (1982) · Polymer · doi:10.1016/0032-3861(82)90176-8 · Cited by 607
Tsuji, H. (1995) · Polymer · doi:10.1016/0032-3861(95)93647-5 · Cited by 519
Self-citationGeneral crystallization behaviour of poly(l-lactic acid)
Kalb, B., & Pennings, A. J. (1980) · Polymer · doi:10.1016/0032-3861(80)90315-8 · Cited by 421
Stereocomplex formation between enantiomeric poly(lactic acids). 9. Stereocomplexation from the melt
Tsuji, H., & Ikada, Y. (1993) · Macromolecules · doi:10.1021/ma00077a032 · Cited by 410
Self-citation
Cited by
An Overview of Polylactides as Packaging Materials
Auras, R., Harte, B., & Selke, S. (2004) · Macromolecular Bioscience · doi:10.1002/mabi.200400043 · Cited by 3,454
Processing technologies for poly(lactic acid)
Lim, L.-T., Auras, R., & Rubino, M. (2008) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2008.05.004 · Cited by 2,766
Poly(lactic acid) crystallization
Saeidlou, S., Huneault, M. A., Li, H., & Park, C. B. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2012.07.005 · Cited by 1,606
Properties of lactic acid based polymers and their correlation with composition
Södergård, A., & Stolt, M. (2002) · Progress in Polymer Science · doi:10.1016/s0079-6700(02)00012-6 · Cited by 1,461
Poly(lactide) Stereocomplexes: Formation, Structure, Properties, Degradation, and Applications
Tsuji, H. (2005) · Macromolecular Bioscience · doi:10.1002/mabi.200500062 · Cited by 1,366
Self-citationBiobased plastics and bionanocomposites: Current status and future opportunities
Reddy, M. M., Vivekanandhan, S., Misra, M., Bhatia, S. K., & Mohanty, A. K. (2013) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2013.05.006 · Cited by 1,080
Zhang, J., Duan, Y., Sato, H., Tsuji, H., Noda, I., Yan, S., & Ozaki, Y. (2005) · Macromolecules · doi:10.1021/ma051232r · Cited by 893
Self-citationNaser, A. Z., Deiab, I., & Darras, B. M. (2021) · RSC Advances · doi:10.1039/d1ra02390j · Cited by 836
From Lactic Acid to Poly(lactic acid) (PLA): Characterization and Analysis of PLA and Its Precursors
Inkinen, S., Hakkarainen, M., Albertsson, A.-C., & Södergård, A. (2011) · Biomacromolecules · doi:10.1021/bm101302t · Cited by 710
Abiotic and biotic environmental degradation of the bioplastic polymer poly(lactic acid): A review
Karamanlioglu, M., Preziosi, R., & Robson, G. D. (2017) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2017.01.009 · Cited by 636
Swetha, T. A., Bora, A., Mohanrasu, K., Balaji, P., Raja, R., Ponnuchamy, K., Muthusamy, G., & Arun, A. (2023) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2023.123715 · Cited by 630
Tsuji, H., & Ikada, Y. (1999) · Polymer · doi:10.1016/s0032-3861(99)00004-x · Cited by 545
Self-citationPoly(lactic acid) stereocomplexes: A decade of progress
Tsuji, H. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.04.017 · Cited by 535
Self-citationCrystallization and Melting Behavior of Polylactides
Sarasua, J.-R., Prud'homme, R. E., Wisniewski, M., Le Borgne, A., & Spassky, N. (1998) · Macromolecules · doi:10.1021/ma971545p · Cited by 525
Controlled and Stereoselective Polymerization of Lactide: Kinetics, Selectivity, and Microstructures
Zhong, Z., Dijkstra, P. J., & Feijen, J. (2003) · Journal of the American Chemical Society · doi:10.1021/ja0347585 · Cited by 501
Fukushima, K., & Kimura, Y. (2006) · Polymer International · doi:10.1002/pi.2010 · Cited by 432
Synthesis of biodegradable polymers from renewable resources
Tschan, M. J.-L., Brulé, E., Haquette, P., & Thomas, C. M. (2012) · Polym. Chem. · doi:10.1039/c2py00452f · Cited by 428
Ilyas, R., Zuhri, M., Aisyah, H., Asyraf, M., Hassan, S., Zainudin, E., Sapuan, S., Sharma, S., Bangar, S., Jumaidin, R., et al. (2022) · Polymers · doi:10.3390/polym14010202 · Cited by 369
Melt–solid polycondensation of lactic acid and its biodegradability
Maharana, T., Mohanty, B., & Negi, Y. S. (2009) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2008.10.001 · Cited by 368
Pillin, I., Montrelay, N., & Grohens, Y. (2006) · Polymer · doi:10.1016/j.polymer.2006.04.013 · Cited by 366
Plasticization of semicrystalline poly(l-lactide) with poly(propylene glycol)
Piorkowska, E., Kulinski, Z., Galeski, A., & Masirek, R. (2006) · Polymer · doi:10.1016/j.polymer.2006.03.115 · Cited by 301
Zhang, J., Tsuji, H., Noda, I., & Ozaki, Y. (2004) · Macromolecules · doi:10.1021/ma049288t · Cited by 288
Self-citationSlager, J., & Domb, A. J. (2003) · Advanced Drug Delivery Reviews · doi:10.1016/s0169-409x(03)00042-5 · Cited by 282
Enhanced thermal stability of poly(lactide)s in the melt by enantiomeric polymer blending
Tsuji, H., & Fukui, I. (2003) · Polymer · doi:10.1016/s0032-3861(03)00175-7 · Cited by 275
Self-citationEffect of the addition of poly (D-lactic acid) on the thermal property of poly (L-lactic acid)
Yamane, H., & Sasai, K. (2003) · Polymer · doi:10.1016/s0032-3861(03)00092-2 · Cited by 266
Strain-Induced Molecular Ordering in Polylactide upon Uniaxial Stretching
Stoclet, G., Seguela, R., Lefebvre, J. M., Elkoun, S., & Vanmansart, C. (2010) · Macromolecules · doi:10.1021/ma9024366 · Cited by 266
Aging of poly(lactide)/poly(ethylene glycol) blends. Part 1. Poly(lactide) with low stereoregularity
Hu, Y., Rogunova, M., Topolkaraev, V., Hiltner, A., & Baer, E. (2003) · Polymer · doi:10.1016/s0032-3861(03)00614-1 · Cited by 261
Hu, Y., Hu, Y. S., Topolkaraev, V., Hiltner, A., & Baer, E. (2003) · Polymer · doi:10.1016/s0032-3861(03)00615-3 · Cited by 258
Enhancement of Mechanical Properties of FDM‐PLA Parts via Thermal Annealing
Wach, R. A., Wolszczak, P., & Adamus‐Wlodarczyk, A. (2018) · Macromolecular Materials and Engineering · doi:10.1002/mame.201800169 · Cited by 255
Melt preparation and nucleation efficiency of polylactide stereocomplex crystallites
Anderson, K. S., & Hillmyer, M. A. (2006) · Polymer · doi:10.1016/j.polymer.2006.01.062 · Cited by 253
Stereoselective Crystallization and Specific Interactions in Polylactides
Sarasua, J.-R., Rodríguez, N. L., Arraiza, A. L., & Meaurio, E. (2005) · Macromolecules · doi:10.1021/ma051266z · Cited by 252
Hu, Y., Hu, Y. S., Topolkaraev, V., Hiltner, A., & Baer, E. (2003) · Polymer · doi:10.1016/s0032-3861(03)00609-8 · Cited by 238
Pan, P., Han, L., Bao, J., Xie, Q., Shan, G., & Bao, Y. (2015) · The Journal of Physical Chemistry B · doi:10.1021/acs.jpcb.5b03546 · Cited by 231
Tsuji, H. (2002) · Polymer · doi:10.1016/s0032-3861(01)00752-2 · Cited by 226
Self-citationEnthalpy of melting of α′- and α-crystals of poly(l-lactic acid)
Righetti, M. C., Gazzano, M., Di Lorenzo, M. L., & Androsch, R. (2015) · European Polymer Journal · doi:10.1016/j.eurpolymj.2015.07.024 · Cited by 215
Tsuji, H., & Tezuka, Y. (2004) · Biomacromolecules · doi:10.1021/bm049835i · Cited by 194
Self-citationde Jong, S. J., van Dijk-Wolthuis, W. N. E., Kettenes-van den Bosch, J. J., Schuyl, P. J. W., & Hennink, W. E. (1998) · Macromolecules · doi:10.1021/ma980553i · Cited by 172
Henton, D., Gruber, P., Lunt, J., & Randall, J. (2005) · Natural Fibers, Biopolymers, and Biocomposites · doi:10.1201/9780203508206.ch16 · Cited by 253
Physical Properties, Crystallization, and Spherulite Growth of Linear and 3-Arm Poly(l-lactide)s
Tsuji, H., Miyase, T., Tezuka, Y., & Saha, S. K. (2005) · Biomacromolecules · doi:10.1021/bm049552q · Cited by 148
Self-citationTsuji, H. (2003) · Biomaterials · doi:10.1016/s0142-9612(02)00365-4 · Cited by 145
Self-citationWater vapor permeability of poly(lactide)s: Effects of molecular characteristics and crystallinity
Tsuji, H., Okino, R., Daimon, H., & Fujie, K. (2006) · Journal of Applied Polymer Science · doi:10.1002/app.22698 · Cited by 136
Self-citationFuruhashi, Y., Kimura, Y., Yoshie, N., & Yamane, H. (2006) · Polymer · doi:10.1016/j.polymer.2006.06.001 · Cited by 127
Evidence of a dual network/spherulitic crystalline morphology in PLA stereocomplexes
Saeidlou, S., Huneault, M. A., Li, H., Sammut, P., & Park, C. B. (2012) · Polymer · doi:10.1016/j.polymer.2012.10.030 · Cited by 120
Use of Monocarboxylic Iron Derivatives in the Ring-Opening Polymerization of l-Lactide
Stolt, M., & Södergård, A. (1999) · Macromolecules · doi:10.1021/ma9902753 · Cited by 119
Remarkable melting behavior of PLA stereocomplex in linear PLLA/PDLA blends
Shao, J., Xiang, S., Bian, X., Sun, J., Li, G., & Chen, X. (2015) · Industrial & Engineering Chemistry Research · doi:10.1021/ie504484b · Cited by 113
Park, H.-S., & Hong, C.-K. (2021) · Polymers · doi:10.3390/polym13111851 · Cited by 85
Tsuji, H., & Bouapao, L. (2012) · Polymer International · doi:10.1002/pi.3219 · Cited by 59
Self-citationTsuji, H., Yamasaki, M., & Arakawa, Y. (2021) · Macromolecules · doi:10.1021/acs.macromol.1c01099 · Cited by 25
Self-citationXu, H., Tang, S., Chen, J., Yin, P., Pu, W., & Lu, Y. (2012) · Polymer Bulletin · doi:10.1007/s00289-011-0673-y · Cited by 25
Tsuji, H., Iguchi, K., & Arakawa, Y. (2021) · Polymer · doi:10.1016/j.polymer.2020.123226 · Cited by 24
Self-citationYin, Y., Liu, G., Song, Y., Zhang, X., de Vos, S., Wang, R., Joziasse, C. A. P., & Wang, D. (2016) · European Polymer Journal · doi:10.1016/j.eurpolymj.2016.05.033 · Cited by 24
Metadata
- Authors
- Tsuji, H., & Ikada, Y.
- Venue
- Macromolecular Chemistry and Physics
- Publisher
- Wiley
- Published
- 1996-10
- Volume
- 197
- Issue
- 10
- Pages
- 3483-3499
- ISSN
- 1022-1352 (ISSN-L)
- 1521-3935
- OpenAlex
- W1963768584
- Cited by
- 379
- References
- 26
- FWCI
- 4.12
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.