The DOI matches its Crossref record; 139 of the 139 references it cites were found in a registry or an index.
Polymeric gels and hydrogels for biomedical and pharmaceutical applications
Abstract
Hydrogels are formed when a three‐dimensional polymeric network is loosely crosslinked. They are swollen by water but not dissolved in it. Hydrogels may display reversible sol–gel transitions, induced by changes in the environmental conditions such as temperature, pH, ionic strength, phase separation, wave length of light, crystallinity, etc. Hydrogel is described as smart or intelligent when sharp transition is induced by small change in such conditions. For the shape‐memory hydrogels, reversible change in shape may also be induced by such stimuli. The preparation and applications of the molecularly imprinted polymeric hydrogels (MIPs) are illustrated by a few examples. The use of shape sensitive hydrogels in microfluidic is mentioned. Application of hydrogels for chronobiology and chronotherapy is outlined. The conversion of hydrogels into aerogels and their respective properties is discussed. Copyright © 2009 John Wiley & Sons, Ltd.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Environment-sensitive hydrogels for drug delivery
Qiu, Y., & Park, K. (2001) · Advanced Drug Delivery Reviews · doi:10.1016/s0169-409x(01)00203-4 · Cited by 3,911
Hydrogels in drug delivery: Progress and challenges
Hoare, T. R., & Kohane, D. S. (2008) · Polymer · doi:10.1016/j.polymer.2008.01.027 · Cited by 3,776
Designing materials for biology and medicine
Langer, R., & Tirrell, D. A. (2004) · Nature · doi:10.1038/nature02388 · Cited by 3,198
Lendlein, A., & Kelch, S. (2002) · Kirk-Othmer Encyclopedia of Chemical Technology · doi:10.1002/0471238961.1908011612051404.a01 · Cited by 2,566
Wulff, G. (1995) · Angewandte Chemie International Edition in English · doi:10.1002/anie.199518121 · Cited by 2,373
Berger, J., Reist, M., Mayer, J. M., Felt, O., Peppas, N. A., & Gurny, R. (2004) · European Journal of Pharmaceutics and Biopharmaceutics · doi:10.1016/s0939-6411(03)00161-9 · Cited by 2,163
Pääkkö, M., Ankerfors, M., Kosonen, H., Nykänen, A., Ahola, S., Österberg, M., Ruokolainen, J., Laine, J., Larsson, P. T., Ikkala, O., et al. (2007) · Biomacromolecules · doi:10.1021/bm061215p · Cited by 1,962
Polysaccharide hydrogels for modified release formulations
Coviello, T., Matricardi, P., Marianecci, C., & Alhaique, F. (2007) · Journal of Controlled Release · doi:10.1016/j.jconrel.2007.01.004 · Cited by 996
Stimuli‐Responsive Polymeric Systems for Biomedical Applications
Mano, J. F. (2008) · Advanced Engineering Materials · doi:10.1002/adem.200700355 · Cited by 665
Behl, M., & Lendlein, A. (2011) · Kirk-Othmer Encyclopedia of Chemical Technology · doi:10.1002/0471238961.1908011612051404.a01.pub2 · Cited by 663
Pääkkö, M., Vapaavuori, J., Silvennoinen, R., Kosonen, H., Ankerfors, M., Lindström, T., Berglund, L. A., & Ikkala, O. (2008) · Soft Matter · doi:10.1039/b810371b · Cited by 660
Stimuli-responsive polymer gels
Ahn, S.-K., Kasi, R. M., Kim, S.-C., Sharma, N., & Zhou, Y. (2008) · Soft Matter · doi:10.1039/b714376a · Cited by 649
Injectable matrices and scaffolds for drug delivery in tissue engineering
Kretlow, J. D., Klouda, L., & Mikos, A. G. (2007) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2007.03.013 · Cited by 629
Smart polymeric gels: Redefining the limits of biomedical devices
Chaterji, S., Kwon, I. K., & Park, K. (2007) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2007.05.018 · Cited by 615
Pulsatile drug release control using hydrogels
Kikuchi, A., & Okano, T. (2002) · Advanced Drug Delivery Reviews · doi:10.1016/s0169-409x(01)00243-5 · Cited by 600
Towards a phenomenological definition of the term ‘gel’
Almdal, K., Dyre, J., Hvidt, S., & Kramer, O. (1993) · Polymer Gels and Networks · doi:10.1016/0966-7822(93)90020-i · Cited by 576
Molecular imprinting within hydrogels
Byrne, M. E., Park, K., & Peppas, N. A. (2002) · Advanced Drug Delivery Reviews · doi:10.1016/s0169-409x(01)00246-0 · Cited by 569
Synthesis and Application of Modulated Polymer Gels
Hu, Z., Zhang, X., & Li, Y. (1995) · Science · doi:10.1126/science.269.5223.525 · Cited by 544
Functional copolymers of N-isopropylacrylamide for bioengineering applications
Rzaev, Z. M. O., Dinçer, S., & Pişkin, E. (2007) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2007.01.006 · Cited by 528
Volume transition in a gel driven by hydrogen bonding
Ilmain, F., Tanaka, T., & Kokufuta, E. (1991) · Nature · doi:10.1038/349400a0 · Cited by 507
Synthesis, characterization and controlled drug release of thermosensitive IPN–PNIPAAm hydrogels
Zhang, X.-Z., Wu, D.-Q., & Chu, C.-C. (2004) · Biomaterials · doi:10.1016/j.biomaterials.2003.10.065 · Cited by 470
Fedorovich, N. E., Alblas, J., de Wijn, J. R., Hennink, W. E., Verbout, A. J., & Dhert, W. J. A. (2007) · Tissue Engineering · doi:10.1089/ten.2006.0175 · Cited by 467
Ziaie, B. (2004) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2003.09.001 · Cited by 456
Progress in the development of interpenetrating polymer network hydrogels
Myung, D., Waters, D., Wiseman, M., Duhamel, P., Noolandi, J., Ta, C. N., & Frank, C. W. (2008) · Polymers for Advanced Technologies · doi:10.1002/pat.1134 · Cited by 406
Oral delivery of insulin using pH‐responsive complexation gels
Lowman, A. M., Morishita, M., Kajita, M., Nagai, T., & Peppas, N. A. (1999) · Journal of Pharmaceutical Sciences · doi:10.1021/js980337n · Cited by 406
Micropumps, microvalves, and micromixers within PCR microfluidic chips: Advances and trends
Zhang, C., Xing, D., & Li, Y. (2007) · Biotechnology Advances · doi:10.1016/j.biotechadv.2007.05.003 · Cited by 376
pH-Responsive Gels of Hydrophobically Modified Poly(acrylic acid)
Philippova, O. E., Hourdet, D., Audebert, R., & Khokhlov, A. R. (1997) · Macromolecules · doi:10.1021/ma970957v · Cited by 375
Eddington, D. (2004) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2003.08.013 · Cited by 367
Prabaharan, M., & Mano, J. F. (2006) · Macromolecular Bioscience · doi:10.1002/mabi.200600164 · Cited by 347
Polymeric Biomaterials in Tissue Engineering
Kohane, D. S., & Langer, R. (2008) · Pediatric Research · doi:10.1203/01.pdr.0000305937.26105.e7 · Cited by 347
Thermally responsive polymer-grafted surfaces facilitate patterned cell seeding and co-culture
Yamato, M., Konno, C., Utsumi, M., Kikuchi, A., & Okano, T. (2002) · Biomaterials · doi:10.1016/s0142-9612(01)00138-7 · Cited by 313
Polymeric hydrogels for novel contact lens-based ophthalmic drug delivery systems: A review
Xinming, L., Yingde, C., Lloyd, A. W., Mikhalovsky, S. V., Sandeman, S. R., Howel, C. A., & Liewen, L. (2008) · Contact Lens and Anterior Eye · doi:10.1016/j.clae.2007.09.002 · Cited by 306
Bryant, S. J., Bender, R. J., Durand, K. L., & Anseth, K. S. (2004) · Biotechnology and Bioengineering · doi:10.1002/bit.20160 · Cited by 305
Lee, J. W., Kim, S. Y., Kim, S. S., Lee, Y. M., Lee, K. H., & Kim, S. J. (1999) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(19990705)73:1<113::aid-app13>3.0.co;2-d · Cited by 300
Cao, Y., Zhang, C., Shen, W., Cheng, Z., Yu, L. (., & Ping, Q. (2007) · Journal of Controlled Release · doi:10.1016/j.jconrel.2007.05.009 · Cited by 299
Chronobiology, drug delivery, and chronotherapeutics
Smolensky, M. H., & Peppas, N. A. (2007) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2007.07.001 · Cited by 288
Ocular release of timolol from molecularly imprinted soft contact lenses
Hiratani, H., Fujiwara, A., Tamiya, Y., Mizutani, Y., & Alvarez-Lorenzo, C. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.04.030 · Cited by 285
Aerogel materials from marine polysaccharides
Quignard, F., Valentin, R., & Di Renzo, F. (2008) · New Journal of Chemistry · doi:10.1039/b808218a · Cited by 276
Engineering Glucose Swelling Responses in Poly(N-isopropylacrylamide)-Based Microgels
Hoare, T., & Pelton, R. (2007) · Macromolecules · doi:10.1021/ma062254w · Cited by 267
Photo-patterning of porous hydrogels for tissue engineering
Bryant, S. J., Cuy, J. L., Hauch, K. D., & Ratner, B. D. (2007) · Biomaterials · doi:10.1016/j.biomaterials.2006.11.033 · Cited by 263
Chemically controlled closed-loop insulin delivery
Ravaine, V., Ancla, C., & Catargi, B. (2008) · Journal of Controlled Release · doi:10.1016/j.jconrel.2008.08.009 · Cited by 249
Kim, T.-K., Sharma, B., Williams, C. G., Ruffner, M. A., Malik, A., McFarland, E. G., & Elisseeff, J. H. (2003) · Osteoarthritis and Cartilage · doi:10.1016/s1063-4584(03)00120-1 · Cited by 247
Functional Group Distributions in Carboxylic Acid Containing Poly(N-isopropylacrylamide) Microgels
Hoare, T., & Pelton, R. (2004) · Langmuir · doi:10.1021/la0351562 · Cited by 247
Hilt, J. Z., & Byrne, M. E. (2004) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2004.04.002 · Cited by 243
Tuzlakoglu, K., Alves, C. M., Mano, J. F., & Reis, R. L. (2004) · Macromolecular Bioscience · doi:10.1002/mabi.200300100 · Cited by 241
Gene expression control by temperature with thermo-responsive polymeric gene carriers
Kurisawa, M., Yokoyama, M., & Okano, T. (2000) · Journal of Controlled Release · doi:10.1016/s0168-3659(00)00297-2 · Cited by 236
Stimulus-sensitive hydrogels and their applications in chemical (micro)analysis
van der Linden, H. J., Herber, S., Olthuis, W., & Bergveld, P. (2003) · The Analyst · doi:10.1039/b210140h · Cited by 234
Development of semicrystalline poly(vinyl alcohol) hydrogels for biomedical applications
Peppas, N. A., & Merrill, E. W. (1977) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820110309 · Cited by 233
Coughlan, D. C., Quilty, F. P., & Corrigan, O. I. (2004) · Journal of Controlled Release · doi:10.1016/j.jconrel.2004.04.014 · Cited by 230
Hydrogels used for cell‐based drug delivery
Schmidt, J. J., Rowley, J., & Kong, H. J. (2008) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.32287 · Cited by 228
Preparation of transparent poly(vinyl alcohol) hydrogel
Hyon, S. H., Cha, W. I., & Ikada, Y. (1989) · Polymer Bulletin · doi:10.1007/bf00255200 · Cited by 228
de Jong, S. J., van Eerdenbrugh, B., van Nostrum, C. F., Kettenes-van den Bosch, J. J., & Hennink, W. E. (2001) · Journal of Controlled Release · doi:10.1016/s0168-3659(01)00228-0 · Cited by 227
Shape‐memory polymer networks from oligo(ϵ‐caprolactone)dimethacrylates
Lendlein, A., Schmidt, A. M., Schroeter, M., & Langer, R. (2005) · Journal of Polymer Science Part A: Polymer Chemistry · doi:10.1002/pola.20598 · Cited by 220
Photocrosslinkable polysaccharides based on chondroitin sulfate
Li, Q., Williams, C. G., Sun, D. D. N., Wang, J., Leong, K., & Elisseeff, J. H. (2004) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.20007 · Cited by 212
Zhang, X., Wu, D., & Chu, C.-C. (2004) · Biomaterials · doi:10.1016/j.biomaterials.2003.11.040 · Cited by 211
Shu, X. Z., Ahmad, S., Liu, Y., & Prestwich, G. D. (2006) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.30831 · Cited by 208
Kang, S. I., & Bae, Y. H. (2003) · Journal of Controlled Release · doi:10.1016/s0168-3659(02)00409-1 · Cited by 198
Charge-Switching, Amphoteric Glucose-Responsive Microgels with Physiological Swelling Activity
Hoare, T., & Pelton, R. (2008) · Biomacromolecules · doi:10.1021/bm701203r · Cited by 196
Chung, H. J., Lee, Y., & Park, T. G. (2008) · Journal of Controlled Release · doi:10.1016/j.jconrel.2007.12.008 · Cited by 194
Gudeman, L. F., & Peppas, N. A. (1995) · Journal of Applied Polymer Science · doi:10.1002/app.1995.070550610 · Cited by 181
Molecular imprinting within hydrogels II: Progress and analysis of the field
Byrne, M. E., & Salian, V. (2008) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2008.09.002 · Cited by 180
Hydrogels for Musculoskeletal Tissue Engineering
Varghese, S., & Elisseeff, J. H. (2006) · Advances in Polymer Science · doi:10.1007/12_072 · Cited by 173
Liang, H.-F., Hong, M.-H., Ho, R.-M., Chung, C.-K., Lin, Y.-H., Chen, C.-H., & Sung, H.-W. (2004) · Biomacromolecules · doi:10.1021/bm049813w · Cited by 173
Quellec, P., Gref, R., Perrin, L., Dellacherie, E., Sommer, F., Verbavatz, J., & Alonso, M. J. (1998) · Journal of Biomedical Materials Research · doi:10.1002/(sici)1097-4636(199810)42:1<112::aid-jbm14>3.0.co;2-n · Cited by 169
Glucose-Sensitive Holographic Sensors for Monitoring Bacterial Growth
Lee, M.-C., Kabilan, S., Hussain, A., Yang, X., Blyth, J., & Lowe, C. R. (2004) · Analytical Chemistry · doi:10.1021/ac049334n · Cited by 167
Li, C., Tang, Y., Armes, S. P., Morris, C. J., Rose, S. F., Lloyd, A. W., & Lewis, A. L. (2005) · Biomacromolecules · doi:10.1021/bm049331k · Cited by 166
Andrade-Vivero, P., Fernandez-Gabriel, E., Alvarez-Lorenzo, C., & Concheiro, A. (2007) · Journal of Pharmaceutical Sciences · doi:10.1002/jps.20761 · Cited by 166
Rapidly Self-Expandable Polymeric Stents with a Shape-Memory Property
Chen, M.-C., Tsai, H.-W., Chang, Y., Lai, W.-Y., Mi, F.-L., Liu, C.-T., Wong, H.-S., & Sung, H.-W. (2007) · Biomacromolecules · doi:10.1021/bm7004615 · Cited by 160
Magnetic Thermoresponsive Core−Shell Nanoparticles
Gelbrich, T., Feyen, M., & Schmidt, A. M. (2006) · Macromolecules · doi:10.1021/ma060006u · Cited by 154
Guo, T., Zhao, J., Chang, J., Ding, Z., Hong, H., Chen, J., & Zhang, J. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2005.08.015 · Cited by 151
Controlled Pulsatile Drug Release from a Ferrogel by a High-Frequency Magnetic Field
Hu, S., Liu, T., Liu, D., & Chen, S. (2007) · Macromolecules · doi:10.1021/ma0707584 · Cited by 146
Time and pH dependent colon specific, pulsatile delivery of theophylline for nocturnal asthma
Mastiholimath, V. S., Dandagi, P. M., Jain, S. S., Gadad, A. P., & Kulkarni, A. R. (2006) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2006.07.045 · Cited by 146
Glucose-responsive microgels with a core–shell structure
Lapeyre, V., Ancla, C., Catargi, B., et al. (2008) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2008.08.039 · Cited by 144
Ethoxysilane-capped PEO–PPO–PEO triblocks: a new family of reverse thermo-responsive polymers
Sosnik, A., & Cohn, D. (2003) · Biomaterials · doi:10.1016/j.biomaterials.2003.09.057 · Cited by 140
Hennink, W. E., de Jong, S. J., Bos, G. W., Veldhuis, T. F. J., & van Nostrum, C. F. (2004) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2003.02.002 · Cited by 134
Drug diffusion in hydrophobically modified N,N-dimethylacrylamide hydrogels
Mullarney, M. P., Seery, T. A. P., & Weiss, R. A. (2006) · Polymer · doi:10.1016/j.polymer.2006.03.096 · Cited by 134
pH-Sensitive Nanogel Possessing Reactive PEG Tethered Chains on the Surface
Hayashi, H., Iijima, M., Kataoka, K., & Nagasaki, Y. (2004) · Macromolecules · doi:10.1021/ma049199g · Cited by 133
Prabaharan, M., Rodríguez‐Pérez, M. Á., de Saja, J. A., & Mano, J. F. (2006) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.30680 · Cited by 132
In vitro osteogenic differentiation of marrow stromal cells encapsulated in biodegradable hydrogels
Temenoff, J. S., Park, H., Jabbari, E., Sheffield, T. L., LeBaron, R. G., Ambrose, C. G., & Mikos, A. G. (2004) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.30064 · Cited by 132
Kashyap, N., Viswanad, B., Sharma, G., Bhardwaj, V., Ramarao, P., & Kumar, M. N. V. R. (2007) · Biomaterials · doi:10.1016/j.biomaterials.2007.01.007 · Cited by 127
Thermoreversible hydrogel scaffolds for articular cartilage engineering
Fisher, J. P., Jo, S., Mikos, A. G., & Reddi, A. H. (2004) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.30148 · Cited by 126
Polymers in the prevention of peritoneal adhesions
Yeo, Y., & Kohane, D. S. (2007) · European Journal of Pharmaceutics and Biopharmaceutics · doi:10.1016/j.ejpb.2007.03.027 · Cited by 120
Huh, K. M., Cho, Y. W., Chung, H., Kwon, I. C., Jeong, S. Y., Ooya, T., Lee, W., Sasaki, S., & Yui, N. (2004) · Macromolecular Bioscience · doi:10.1002/mabi.200300037 · Cited by 112
Stimuli-sensitive hydrogels: ideal carriers for chronobiology and chronotherapy
Peppas, N. A., & Leobandung, W. (2004) · Journal of Biomaterials Science Polymer Edition · doi:10.1163/156856204322793539 · Cited by 112
Taşdelen, B., Kayaman-Apohan, N., Güven, O., & Baysal, B. M. (2004) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2004.03.017 · Cited by 111
Synthesis and characterization of poly(methacrylic acid) hydrogels for metoclopramide delivery
García, D. M., Escobar, J. L., Bada, N., Casquero, J. L. G., Hernáez, E., & Katime, I. (2004) · European Polymer Journal · doi:10.1016/j.eurpolymj.2004.03.011 · Cited by 111
Vihola, H., Laukkanen, A., Tenhu, H. J., & Hirvonen, J. J. (2008) · Journal of Pharmaceutical Sciences · doi:10.1002/jps.21348 · Cited by 111
Liu, Y., Shao, Y., & Lü, J. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2006.02.042 · Cited by 107
In vitro degradation of pH-sensitive hydrogels containing aromatic azo bonds
Ghandehari, H., Kopečková, P., & Kopec̆ek, J. (1997) · Biomaterials · doi:10.1016/s0142-9612(97)00007-0 · Cited by 105
Biodegradable photo-crosslinked poly(ether-ester) networks for lubricious coatings
Kim, B. S., Hrkach, J. S., & Langer, R. (2000) · Biomaterials · doi:10.1016/s0142-9612(99)00174-x · Cited by 104
Prabaharan, M., & Mano, J. F. (2005) · Macromolecular Bioscience · doi:10.1002/mabi.200500087 · Cited by 98
Yamagata, T., Morishita, M., Kavimandan, N. J., Nakamura, K., Fukuoka, Y., Takayama, K., & Peppas, N. A. (2006) · Journal of Controlled Release · doi:10.1016/j.jconrel.2006.03.005 · Cited by 94
Robb, S. A., Lee, B. H., McLemore, R. Y., & Vernon, B. L. (2007) · Biomacromolecules · doi:10.1021/bm070267r · Cited by 93
Metal Ion-Sensitive Holographic Sensors
Mayes, A. G., Blyth, J., Millington, R. B., & Lowe, C. R. (2002) · Analytical Chemistry · doi:10.1021/ac020131d · Cited by 91
Behravesh, E., Shung, A. K., Jo, S., & Mikos, A. G. (2001) · Biomacromolecules · doi:10.1021/bm010137x · Cited by 86
Mequanint, K., Patel, A. C., & Bezuidenhout, D. (2006) · Biomacromolecules · doi:10.1021/bm0507047 · Cited by 86
A Cyclodextrin Microgel for Controlled Release Driven by Inclusion Effects
Liu, Y., Fan, X., Kang, T., et al. (2004) · Macromolecular Rapid Communications · doi:10.1002/marc.200400396 · Cited by 83
Shape memorizing properties of a hydrogel of poly(vinyl alcohol)
Hirai, T., Maruyama, H., Suzuki, T., & Hayashi, S. (1992) · Journal of Applied Polymer Science · doi:10.1002/app.1992.070451019 · Cited by 82
Asymmetric nafion/(zirconium oxide) hybrid membranes via in situ sol‐gel chemistry
Apichatachutapan, W., Moore, R. B., & Mauritz, K. A. (1996) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(19961010)62:2<301::aid-app5>3.0.co;2-0 · Cited by 82
Aburto, J., & Borgne, S. L. (2004) · Macromolecules · doi:10.1021/ma049961e · Cited by 81
Geever, L. M., Devine, D. M., Nugent, M., Kennedy, J. E., Lyons, J. G., Hanley, A., & Higginbotham, C. L. (2006) · European Polymer Journal · doi:10.1016/j.eurpolymj.2006.06.002 · Cited by 81
Lalloo, A., Chao, P., Hu, P., Stein, S., & Sinko, P. J. (2006) · Journal of Controlled Release · doi:10.1016/j.jconrel.2006.03.002 · Cited by 81
Xiao, C., & Gao, Y. (2007) · Journal of Applied Polymer Science · doi:10.1002/app.27203 · Cited by 79
Dextran and hyaluronan methacrylate based hydrogels as matrices for soft tissue reconstruction
Möller, S., Weisser, J., Bischoff, S. J., & Schnabelrauch, M. (2007) · Biomolecular Engineering · doi:10.1016/j.bioeng.2007.08.014 · Cited by 79
Ju, X., Chu, L., Liu, L., et al. (2008) · The Journal of Physical Chemistry B · doi:10.1021/jp709746w · Cited by 79
Sun, G., Zhang, X., & Chu, C. (2007) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-007-3030-9 · Cited by 76
Swelling/deswelling kinetics of PNIPAAm hydrogels synthesized by microwave irradiation
Zhao, Z. X., Li, Z. A., Xia, Q. B., Bajalis, E., Xi, H., & Lin, Y. S. (2007) · Chemical Engineering Journal · doi:10.1016/j.cej.2007.12.009 · Cited by 75
Jain, S., Yap, W. T., & Irvine, D. J. (2005) · Biomacromolecules · doi:10.1021/bm0503221 · Cited by 72
Novel pH‐ and Temperature‐Responsive Block Copolymers with Tunable pH‐Responsive Range
He, C., Zhao, C., Chen, X., Guo, Z., Zhuang, X., & Jing, X. (2008) · Macromolecular Rapid Communications · doi:10.1002/marc.200700721 · Cited by 71
Ho, E., Lowman, A. M., & Marcolongo, M. S. (2006) · Biomacromolecules · doi:10.1021/bm0602536 · Cited by 66
Işıklan, N., İnal, M., & Yiğitoğlu, M. (2008) · Journal of Applied Polymer Science · doi:10.1002/app.28577 · Cited by 66
Lee, W., Choi, D., Lee, Y., Kim, D. N., Park, J., & Koh, W. (2007) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2007.09.085 · Cited by 64
Xu, C., & Kopec̆ek, J. (2007) · Pharmaceutical Research · doi:10.1007/s11095-007-9343-z · Cited by 64
Development of a microfluidic device for the maintenance and interrogation of viable tissue biopsies
Hattersley, S. M., Dyer, C. E., Greenman, J., & Haswell, S. J. (2008) · Lab on a Chip · doi:10.1039/b809345h · Cited by 62
Wu, X., Huang, S., Zhang, J., & Zhuo, R. (2004) · Macromolecular Bioscience · doi:10.1002/mabi.200300041 · Cited by 60
Sun, G., Zhang, X., & Chu, C. (2008) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-008-3410-9 · Cited by 60
Huang, X. D., Nayak, B. R., & Lowe, T. L. (2004) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/pola.20327 · Cited by 60
Spatial inhomogeneity in poly(acrylic acid) hydrogels
Yazıcı, İ., & Okay, O. (2005) · Polymer · doi:10.1016/j.polymer.2005.01.079 · Cited by 55
Owino, J. H. O., Arotiba, O. A., Baker, P., et al. (2008) · Reactive and Functional Polymers · doi:10.1016/j.reactfunctpolym.2008.05.005 · Cited by 50
Methyl methacrylate-co-itaconic acid (MMA-co-IA) hydrogels for controlled drug delivery
Ranjha, N. M., Mudassir, J., & Akhtar, N. (2008) · Journal of Sol-Gel Science and Technology · doi:10.1007/s10971-008-1750-z · Cited by 47
Zhang, J., Huang, S., & Zhuo, R. (2004) · Macromolecular Chemistry and Physics · doi:10.1002/macp.200350080 · Cited by 47
Divalent metal ion-sensitive holographic sensors
Madrigal-González, B., Christie, G., Davidson, C. A. B., Blyth, J., & Lowe, C. R. (2004) · Analytica Chimica Acta · doi:10.1016/j.aca.2004.03.029 · Cited by 47
Cheng, V., Lee, B. H., Pauken, C. M., & Vernon, B. L. (2007) · Journal of Applied Polymer Science · doi:10.1002/app.26760 · Cited by 44
Rakovsky, A., Marbach, D., Lotan, N., & Lanir, Y. (2008) · Journal of Applied Polymer Science · doi:10.1002/app.29420 · Cited by 42
Self-compatibilization of polymer blends via novel solid-state shear extrusion pulverization
Nesarikar, A. R., Carr, S. H., Khait, K., & Mirabella, F. M. (1997) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(19970228)63:9<1173::aid-app9>3.0.co;2-e · Cited by 40
Kim, S. J., Kim, H. I., Park, S. J., & Kim, S. I. (2004) · Sensors and Actuators A Physical · doi:10.1016/j.sna.2004.04.020 · Cited by 37
Geever, L. M., Nugent, M., & Higginbotham, C. L. (2007) · Journal of Materials Science · doi:10.1007/s10853-007-1814-4 · Cited by 34
Novel Physically Crosslinked Polyurethane‐block‐Poly(vinyl pyrrolidone) Hydrogel Biomaterials
Patel, A. C., & Mequanint, K. (2007) · Macromolecular Bioscience · doi:10.1002/mabi.200600272 · Cited by 34
Synthesis and characterization of partially biodegradable and thermosensitive hydrogel
Zhang, X., Sun, G., Wu, D., & Chu, C. (2004) · Journal of Materials Science Materials in Medicine · doi:10.1023/b:jmsm.0000036274.83104.fe · Cited by 32
Preparation and swelling characterization of poly (n‐isopropylacrylamide)‐based porous hydrogels
Chern, J., Lee, W., & Hsieh, M. (2004) · Journal of Applied Polymer Science · doi:10.1002/app.20301 · Cited by 32
Jiang, Z., Hao, J., You, Y., Liu, Y., Wang, Z., & Deng, X. (2007) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.31699 · Cited by 31
Bajpai, S. K., & Saxena, S. (2004) · Journal of Applied Polymer Science · doi:10.1002/app.20283 · Cited by 27
Patel, A. C., & Mequanint, K. (2008) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/pola.22937 · Cited by 21
Mawad, D., Foster, J. L. J. R., & Lauto, A. (2008) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2008.04.032 · Cited by 21
Yu, S.-H., Wu, Y., Mi, F., & Shyu, S. (2008) · Journal of Applied Polymer Science · doi:10.1002/app.28494 · Cited by 19
Bayramgil, N. P. (2008) · Journal of Applied Polymer Science · doi:10.1002/app.28221 · Cited by 16
Wang, B., Liu, M., Liang, R., et al. (2007) · Macromolecular Bioscience · doi:10.1002/mabi.200700176 · Cited by 11
Mitsumata, T., Hasegawa, C., Kawada, H., Kaneko, T., & Takimoto, J. (2007) · Reactive and Functional Polymers · doi:10.1016/j.reactfunctpolym.2007.10.003 · Cited by 10
Synthesis and properties of chitosan‐modified poly(acrylic acid)
Chuang, C., Don, T., & Chiu, W. (2008) · Journal of Applied Polymer Science · doi:10.1002/app.28420 · Cited by 8
Cited by
Aderibigbe, B., & Buyana, B. (2018) · Pharmaceutics · doi:10.3390/pharmaceutics10020042 · Cited by 850
Polysaccharide-based aerogels—Promising biodegradable carriers for drug delivery systems
García-González, C. A., Alnaief, M., & Smirnova, I. (2011) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2011.06.066 · Cited by 725
Karimi, M., Sahandi Zangabad, P., Ghasemi, A., Amiri, M., Bahrami, M., Malekzad, H., Ghahramanzadeh Asl, H., Mahdieh, Z., Bozorgomid, M., Ghasemi, A., et al. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b00371 · Cited by 500
Gated Materials for On-Command Release of Guest Molecules
Aznar, E., Oroval, M., Pascual, L., Murguía, J. R., Martínez-Máñez, R., & Sancenón, F. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00456 · Cited by 488
Ionic liquid gel materials: applications in green and sustainable chemistry
Marr, P. C., & Marr, A. C. (2016) · Green Chemistry · doi:10.1039/c5gc02277k · Cited by 472
Metadata
- Authors
- Jagur‐Grodzinski, J.
- Venue
- Polymers for Advanced Technologies
- Publisher
- Wiley
- Published
- 2009-09
- Volume
- 21
- Issue
- 1
- Pages
- 27-47
- ISSN
- 1042-7147 (ISSN-L)
- 1099-1581
- OpenAlex
- W2005861557
- Cited by
- 383
- References
- 139
- FWCI
- 12.56
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.