The DOI matches its Crossref record; 46 of the 46 references it cites were found in a registry or an index.
Construction of 3D Skeleton for Polymer Composites Achieving a High Thermal Conductivity
Abstract
Owing to the growing heat removal issue in modern electronic devices, electrically insulating polymer composites with high thermal conductivity have drawn much attention during the past decade. However, the conventional method to improve through‐plane thermal conductivity of these polymer composites usually yields an undesired value (below 3.0 Wm−1 K−1). Here, construction of a 3D phonon skeleton is reported composed of stacked boron nitride (BN) platelets reinforced with reduced graphene oxide (rGO) for epoxy composites by the combination of ice‐templated and infiltrating methods. At a low filler loading of 13.16 vol%, the resulting 3D BN‐rGO/epoxy composites exhibit an ultrahigh through‐plane thermal conductivity of 5.05 Wm−1 K−1 as the best thermal‐conduction performance reported so far for BN sheet‐based composites. Theoretical models qualitatively demonstrate that this enhancement results from the formation of phonon‐matching 3D BN‐rGO networks, leading to high rates of phonon transport. The strong potential application for thermal management has been demonstrated by the surface temperature variations of the composites with time during heating and cooling.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The chemistry of graphene oxide
Dreyer, D. R., Park, S., Bielawski, C. W., & Ruoff, R. S. (2010) · Chem. Soc. Rev. · doi:10.1039/b917103g · Cited by 11,653
Graphene and Graphene Oxide: Synthesis, Properties, and Applications
Zhu, Y., Murali, S., Cai, W., Li, X., Suk, J. W., Potts, J. R., & Ruoff, R. S. (2010) · Advanced Materials · doi:10.1002/adma.201001068 · Cited by 10,522
Yang, D., Velamakanni, A., Bozoklu, G., Park, S., Stoller, M., Piner, R. D., Stankovich, S., Jung, I., Field, D. A., Ventrice, C. A., et al. (2009) · Carbon · doi:10.1016/j.carbon.2008.09.045 · Cited by 3,260
Cahill, D. G., Ford, W. K., Goodson, K. E., Mahan, G. D., Majumdar, A., Maris, H. J., Merlin, R., & Phillpot, S. R. (2003) · Journal of Applied Physics · doi:10.1063/1.1524305 · Cited by 2,825
Atomic layers of hybridized boron nitride and graphene domains
Ci, L., Song, L., Jin, C., Jariwala, D., Wu, D., Li, Y., Srivastava, A., Wang, Z. F., Storr, K., Balicas, L., et al. (2010) · Nature Materials · doi:10.1038/nmat2711 · Cited by 2,166
Emerging challenges and materials for thermal management of electronics
Moore, A. L., & Shi, L. (2014) · Materials Today · doi:10.1016/j.mattod.2014.04.003 · Cited by 2,106
Freezing as a Path to Build Complex Composites
Deville, S., Saiz, E., Nalla, R. K., & Tomsia, A. P. (2006) · Science · doi:10.1126/science.1120937 · Cited by 1,900
Zhi, C., Bando, Y., Tang, C., Kuwahara, H., & Golberg, D. (2009) · Advanced Materials · doi:10.1002/adma.200900323 · Cited by 1,756
Lei, W., Mochalin, V. N., Liu, D., Qin, S., Gogotsi, Y., & Chen, Y. (2015) · Nature Communications · doi:10.1038/ncomms9849 · Cited by 861
Ice-templated porous alumina structures
Deville, S., Saiz, E., & Tomsia, A. P. (2007) · Acta Materialia · doi:10.1016/j.actamat.2006.11.003 · Cited by 769
Foygel, M., Morris, R. D., Anez, D., French, S., & Sobolev, V. L. (2005) · Physical Review B · doi:10.1103/physrevb.71.104201 · Cited by 655
Huang, X., Zhi, C., Jiang, P., Golberg, D., Bando, Y., & Tanaka, T. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201201824 · Cited by 647
Li, Q., Zhang, G., Liu, F., Han, K., Gadinski, M. R., Xiong, C., & Wang, Q. (2014) · Energy & Environmental Science · doi:10.1039/c4ee02962c · Cited by 645
Lee, D., Lee, B., Park, K. H., Ryu, H. J., Jeon, S., & Hong, S. H. (2015) · Nano Letters · doi:10.1021/nl504397h · Cited by 645
Zeng, X., Yao, Y., Gong, Z., Wang, F., Sun, R., Xu, J., & Wong, C. (2015) · Small · doi:10.1002/smll.201502173 · Cited by 618
Self-citationThermal conductance of interfaces between highly dissimilar materials
Lyeo, H.-K., & Cahill, D. G. (2006) · Physical Review B · doi:10.1103/physrevb.73.144301 · Cited by 576
Lin, Z., Liu, Y., Raghavan, S., Moon, K.-S., Sitaraman, S. K., & Wong, C.-P. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am401939z · Cited by 469
Self-citationRole of Interface on the Thermal Conductivity of Highly Filled Dielectric Epoxy/AlN Composites
Huang, X., Iizuka, T., Jiang, P., Ohki, Y., & Tanaka, T. (2012) · The Journal of Physical Chemistry C · doi:10.1021/jp3026545 · Cited by 455
Highly Water-Soluble, Porous, and Biocompatible Boron Nitrides for Anticancer Drug Delivery
Weng, Q., Wang, B., Wang, X., Hanagata, N., Li, X., Liu, D., Wang, X., Jiang, X., Bando, Y., & Golberg, D. (2014) · ACS Nano · doi:10.1021/nn5014808 · Cited by 455
Gutiérrez, M. C., Ferrer, M. L., & del Monte, F. (2008) · Chemistry of Materials · doi:10.1021/cm702028z · Cited by 450
Yuan, C., Duan, B., Li, L., Xie, B., Huang, M., & Luo, X. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b03007 · Cited by 446
Polymer/Boron Nitride Nanocomposite Materials for Superior Thermal Transport Performance
Song, W., Wang, P., Cao, L., Anderson, A., Meziani, M. J., Farr, A. J., & Sun, Y. (2012) · Angewandte Chemie International Edition · doi:10.1002/anie.201201689 · Cited by 411
Lian, G., Tuan, C.-C., Li, L., Jiao, S., Wang, Q., Moon, K.-S., Cui, D., & Wong, C.-P. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b01595 · Cited by 382
Self-citationChen, J., Huang, X., Sun, B., Wang, Y., Zhu, Y., & Jiang, P. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b08061 · Cited by 375
Ultrahigh Thermal Conductivity of Assembled Aligned Multilayer Graphene/Epoxy Composite
Li, Q., Guo, Y., Li, W., Qiu, S., Zhu, C., Wei, X., Chen, M., Liu, C., Liao, S., Gong, Y., et al. (2014) · Chemistry of Materials · doi:10.1021/cm501473t · Cited by 351
Kuang, Z., Chen, Y., Lu, Y., Liu, L., Hu, S., Wen, S., Mao, Y., & Zhang, L. (2015) · Small · doi:10.1002/smll.201402569 · Cited by 345
Yao, Y., Zeng, X., Wang, F., Sun, R., Xu, J.-B., & Wong, C.-P. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b04187 · Cited by 279
Self-citationSchelling, P. K., Shi, L., & Goodson, K. E. (2005) · Materials Today · doi:10.1016/s1369-7021(05)70935-4 · Cited by 276
Wang, F., Zeng, X., Yao, Y., Sun, R., Xu, J., & Wong, C.-P. (2016) · Scientific Reports · doi:10.1038/srep19394 · Cited by 259
Self-citationYang, J., Tang, L.-S., Bao, R.-Y., Bai, L., Liu, Z.-Y., Yang, W., Xie, B.-H., & Yang, M.-B. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta08454k · Cited by 255
Artificially Stacked Atomic Layers: Toward New van der Waals Solids
Gao, G., Gao, W., Cannuccia, E., Taha-Tijerina, J., Balicas, L., Mathkar, A., Narayanan, T. N., Liu, Z., Gupta, B. K., Peng, J., et al. (2012) · Nano Letters · doi:10.1021/nl301061b · Cited by 229
Wu, H., & Kessler, M. R. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b00147 · Cited by 212
Dai, W., Yu, J., Wang, Y., Song, Y., Alam, F. E., Nishimura, K., Lin, C.-T., & Jiang, N. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta06417h · Cited by 203
An ultrathin high-performance heat spreader fabricated with hydroxylated boron nitride nanosheets
Fu, L., Wang, T., Yu, J., Dai, W., Sun, H., Liu, Z., Sun, R., Jiang, N., Yu, A., & Lin, C.-T. (2017) · 2D Materials · doi:10.1088/2053-1583/aa636e · Cited by 185
Self-citationYao, Y., Zeng, X., Pan, G., Sun, J., Hu, J., Huang, Y., Sun, R., Xu, J.-B., & Wong, C.-P. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b10935 · Cited by 169
Self-citationZhao, H., Yue, Y., Guo, L., Wu, J., Zhang, Y., Li, X., Mao, S., & Han, X. (2016) · Advanced Materials · doi:10.1002/adma.201600839 · Cited by 155
Boron Nitride Nanomaterials for Thermal Management Applications
Meziani, M. J., Song, W., Wang, P., Lu, F., Hou, Z., Anderson, A., Maimaiti, H., & Sun, Y.-P. (2015) · ChemPhysChem · doi:10.1002/cphc.201402814 · Cited by 153
Thermal transport across graphene and single layer hexagonal boron nitride
Zhang, J., Hong, Y., & Yue, Y. (2015) · Journal of Applied Physics · doi:10.1063/1.4916985 · Cited by 150
Heat flow at nanoparticle interfaces
Warzoha, R. J., & Fleischer, A. S. (2014) · Nano Energy · doi:10.1016/j.nanoen.2014.03.014 · Cited by 144
Zhang, D.-L., Zha, J., Li, C., Li, W., Wang, S., Wen, Y., & Dang, Z. (2017) · Composites Science and Technology · doi:10.1016/j.compscitech.2017.02.022 · Cited by 135
HEXAGONAL BORON NITRIDE: A PROMISING SUBSTRATE FOR GRAPHENE WITH HIGH HEAT DISSIPATION
Zhang, Z., Hu, S., Chen, J., & Li, B. (2017) · International Heat Transfer Conference (IHTC) · doi:10.1088/1361-6528/aa6e49 · Cited by 125
Fabrication of oriented hBN scaffolds for thermal interface materials
Shen, H., Cai, C., Guo, J. K., Qian, Z., Zhao, N., & Xu, J. Z. (2016) · RSC Advances · doi:10.1039/c6ra00980h · Cited by 121
Self-citationHong, H., Kim, J. R., & Kim, T. (2017) · Polymers · doi:10.3390/polym9090413 · Cited by 116
Low-density three-dimensional foam using self-reinforced hybrid two-dimensional atomic layers
Vinod, S., Tiwary, C. S., Autreto, P. A. D. S., Taha‐Tijerina, J., Özden, Ş., Chipara, A. C., Vajtai, R., Galvao, D. S., Narayanan, T. N., & Ajayan, P. M. (2014) · Nature Communications · doi:10.1038/ncomms5541 · Cited by 106
Patil, I. M., Lokanathan, M., & Kakade, B. A. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta00525j · Cited by 65
Yan, Z., Chen, L., Yoon, M., & Kumar, S. (2016) · Nanoscale · doi:10.1039/c5nr06818e · Cited by 45
Cited by
Shao, G., Hanaor, D. A. H., Shen, X., & Gurlo, A. (2020) · Advanced Materials · doi:10.1002/adma.201907176 · Cited by 871
Han, J., Du, G., Gao, W., & Bai, H. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201900412 · Cited by 620
Zhang, F., Feng, Y., & Feng, W. (2020) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2020.100580 · Cited by 566
Recent Progress in Graphene/Polymer Nanocomposites
Sun, X., Huang, C., Wang, L., Liang, L., Cheng, Y., Fei, W., & Li, Y. (2021) · Advanced Materials · doi:10.1002/adma.202001105 · Cited by 490
Wang, Z., Wu, Z., Weng, L., Ge, S., Jiang, D., Huang, M., Mulvihill, D. M., Chen, Q., Guo, Z., Jazzar, A., et al. (2023) · Advanced Functional Materials · doi:10.1002/adfm.202301549 · Cited by 419
Metadata
- Authors
- Yao, Y., Sun, J., Zeng, X., Sun, R., Xu, J., & Wong, C.
- Venue
- Small
- Publisher
- Wiley
- Published
- 2018-02-02
- Volume
- 14
- Issue
- 13
- Pages
- e1704044-e1704044
- ISSN
- 1613-6810 (ISSN-L)
- 1613-6829
- OpenAlex
- W2793717938
- Cited by
- 389
- References
- 46
- FWCI
- 16.63
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.