The effect of morphological changes from pulp fiber towards nano-scale fibrillated cellulose on the mechanical properties of high-strength plant fiber based composites
Open accessThe DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
Fibrillated kraft pulp impregnated with phenolic resin was compressed under an extremely high pressure of 100 MPa to produce high strength cellulose nanocomposites. To evaluate how the degree of fibrillation of pulp fiber affects the mechanical properties of the final composites, kraft pulp subjected to various levels of refining and high pressure homogenization treatments was used as raw material with different phenolic resin contents. It was found that fibrillation solely of the surface of the fibers is not effective in improving composite strength, though there is a distinct point in the fibrillation stage at which an abrupt increase in the mechanical properties of composites occurs. In the range between 16 and 30 passes through refiner treatments, pulp fibers underwent a degree of fibrillation that resulted in a stepwise increment of mechanical properties, most strikingly in bending strength. This increase was attributed to the complete fibrillation of the bulk of the fibers. For additional high pressure homogenization-treated pulps, composite strength increased linearly against water retention values, which characterize the cellulose’s exposed surface area, and reached maximum value at 14 passes through the homogenizer.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“They observed that the disintegration could be improved by increasing the number of passes to 30 times.”
From Cellulosic Bionanocomposites: A Review of Preparation, Properties and Applications (2010) · cites this paper as [83]
Citations
Cites
Some microrheological aspects of wood-pulp fibres subjected to fatigue loading
Hamad, W. Y. (1997) · Cellulose · doi:10.1023/a:1018463117874 · Cited by 29
Modeling of the particle breakage kinetics in the wet mills for the paper industry
Roux, J., & Mayade, T. L. (1999) · Powder Technology · doi:10.1016/s0032-5910(99)00143-6 · Cited by 22
Cited by
Items 201–300 of 702
Ifuku, S., & Yano, H. (2015) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2014.12.029 · Cited by 78
Self-citationCorreia, V. D. C., dos Santos, V. A., Sain, M. M., dos Santos, S. F., Leão, A. L., & Savastano, H. (2016) · Cellulose · doi:10.1007/s10570-016-0996-9 · Cited by 79
Kawee, N., Lam, N. T., & Sukyai, P. (2017) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2017.09.101 · Cited by 78
Kinetic aspects of the adsorption of xyloglucan onto cellulose nanocrystals
Villares, A., Moreau, C., Dammak, A., Capron, I., & Cathala, B. (2015) · Soft Matter · doi:10.1039/c5sm01413a · Cited by 77
Preparation and characterization of cellulose gels from corn cobs
Shogren, R. L., Peterson, S. C., Evans, K. O., & Kenar, J. A. (2011) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2011.06.035 · Cited by 77
Cellulose-Based Nanocomposites
Berglund, L. A. (2005) · doi:10.1201/9780203508206-34 · Cited by 72
In situ processing of cellulose nanocomposites
Ray, D., & Sain, S. (2015) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2015.09.007 · Cited by 77
Novel anisotropic materials from functionalised colloidal cellulose and cellulose derivatives
Holt, B. L., Stoyanov, S. D., Pelan, E. G., & Paunov, V. N. (2010) · Journal of Materials Chemistry · doi:10.1039/c0jm01022g · Cited by 76
The use of biobased nanofibres in composites
Bandyopadhyay‐Ghosh, S., Ghosh, S. B., & Sain, M. M. (2014) · Elsevier eBooks · doi:10.1533/9781782421276.5.571 · Cited by 76
Phenol formaldehyde resin modified by cellulose and lignin nanomaterials: Review and recent progress
Dorieh, A., Ayrılmış, N., Pour, M. F., Movahed, S. G., Kiamahalleh, M. V., Shahavi, M. H., Hatefnia, H., & Meysam, M. (2022) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2022.09.279 · Cited by 76
Nanofibrillar cellulose from Posidonia oceanica: Properties and morphological features
Bettaieb, F., Khiari, R., Dufresne, A., Mhenni, M. F., Putaux, J., & Boufi, S. (2015) · Industrial Crops and Products · doi:10.1016/j.indcrop.2014.12.060 · Cited by 75
Effect of cationic polymethacrylates on the rheology and flocculation of microfibrillated cellulose
Karppinen, A., Vesterinen, A., Saarinen, T., Pietikäinen, P., & Seppälä, J. V. (2011) · Cellulose · doi:10.1007/s10570-011-9597-9 · Cited by 75
“1983), reinforcing material in nanocomposites (Nakagaito and Yano 2004; Nakagaito and Yano 2005), or for strengthening paper products (Taipale et al.”
Background3 nm Thick Lignocellulose Nanofibers Obtained from Esterified Wood with Maleic Anhydride
Iwamoto, S., & Endo, T. (2014) · ACS Macro Letters · doi:10.1021/mz500787p · Cited by 75
Novel bionanocomposites: processing, properties and potential applications
Oksman, K., Mathew, A. P., & Sain, M. M. (2009) · Plastics Rubber and Composites Macromolecular Engineering · doi:10.1179/146580109x12540995045723 · Cited by 76
Iwamoto, S., Yamamoto, S., Lee, S. H., & Endo, T. (2014) · Cellulose · doi:10.1007/s10570-014-0195-5 · Cited by 74
“strains at break of phenolic resin (Nakagaito and Yano 2004) and polyvinyl alcohol composites (Wang and Sain 2007).”
BackgroundOffice waste paper as cellulose nanocrystal source
Orue, A., Santamaria‐Echart, A., Eceiza, A., Peña-Rodríguez, C., & Arbelaiz, A. (2017) · Journal of Applied Polymer Science · doi:10.1002/app.45257 · Cited by 74
DMA analysis and wood bonding of PVAc latex reinforced with cellulose nanofibrils
López-Suevos, F., Eyholzer, C., Bordeanu, N., & Richter, K. (2010) · Cellulose · doi:10.1007/s10570-010-9396-8 · Cited by 75
“…Roohani et al. 2008; Lu et al. 2008), hydroxypropyl cellulose (Zimmermann et al. 2005), acrylic and phenol–formaldehyde resins (Iwamoto et al. 2007; Nakagaito and Yano 2004, 2005, 2008), or poly(styrene-co-butyl acrylate) (Samir et al. 2004; Dalmas et al. 2007) and PVAc (De Rodriguez et al.…”
BackgroundCellulose nanofiber-reinforced polycaprolactone/polypropylene hybrid nanocomposite
Lee, S. H., Teramoto, Y., & Endo, T. (2010) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2010.10.014 · Cited by 73
Tanpichai, S., Sampson, W. W., & Eichhorn, S. J. (2012) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2012.02.006 · Cited by 73
Optimizing cellulose fibrillation for the production of cellulose nanofibrils by a disk grinder
Hu, C., Zhao, Y., Li, K., Zhu, J. Y., & Gleisner, R. (2015) · Holzforschung · doi:10.1515/hf-2014-0219 · Cited by 73
“1983; Nakagaito and Yano 2004; Stelte and Sanadi 2009), a microfluidizer (Spence et al.”
BackgroundHees, T., Zhong, F., Rudolph, T., Walther, A., & Mülhaupt, R. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201605586 · Cited by 73
Rapid preparation of cellulose nanofibre sheet
Varanasi, S., & Batchelor, W. J. (2012) · Cellulose · doi:10.1007/s10570-012-9794-1 · Cited by 72
“Drying methods have included oven drying (Henriksson et al. 2008), hot pressing (Nakagaito and Yano 2004), air drying (Taniguchi and Okamura 1998), and drying under vacuum followed by use of a sheet dryer (Sehaqui et al. 2010).”
MethodCheng, M., Dien, B. S., Lee, D. K., & Singh, V. (2019) · Bioresource Technology · doi:10.1016/j.biortech.2019.121663 · Cited by 71
Bamboo nanofiber preparation by HCW and grinding treatment and its application for nanocomposite
Chang, F., Lee, S. H., Toba, K., Nagatani, A., & Endo, T. (2011) · Wood Science and Technology · doi:10.1007/s00226-011-0416-0 · Cited by 70
“For example, Yano and colleagues produced various degrees of fibrillation from kraft pulp by several passes solely through a refiner and by passes through a refiner and subsequently through a highpressure homogenizer (Iwamoto et al. 2005; Nakagaito and Yano 2004; Nakagaito et al. 2005).”
BackgroundFABRICATION OF HIBISCUS SABDARIFFA FIBRE REINFORCED POLYMER COMPOSITES
Singha, A. S., & Thakur, V. K. (2008) · Cited by 70
Highly improved mechanical strength of aramid paper composite via a bridge of cellulose nanofiber
Lu, Z., Hu, W., Xie, F., & Yang, H. (2017) · Cellulose · doi:10.1007/s10570-017-1315-9 · Cited by 70
“Moreover, compared to ordinary cellulose fiber, CNF possessed rich free hydroxyl groups and large specific surface area, the hydrogen bond between them facilitated the adhesion (Veigel et al. 2011; Nakagaito and Yano 2004).”
BackgroundRaj, P., Mayahi, A., Lahtinen, P., Varanasi, S., Garnier, G., Martin, D. J., & Batchelor, W. J. (2016) · Cellulose · doi:10.1007/s10570-016-1039-2 · Cited by 68
“…from different plant sources, and using different fibrillation equipment; these include: homogenisers (Iwamoto et al. 2005; Leitner et al. 2007; Nakagaito and Yano 2004; Herrick et al. 1983; Turbak et al. 1983), microfluidizers (Taipale et al. 2010; Pääkkö et al. 2007; Henriksson et al.…”
BackgroundAsem, M., Jimat, D. N., Jafri, N. H. S., Nawawi, W. M. F. W., Azmin, N. F. M., & Wahab, M. F. A. (2021) · Journal of King Saud University - Engineering Sciences · doi:10.1016/j.jksues.2021.03.003 · Cited by 67
“A previous study reported that high-pressure homogenization and refining produced irreversible changes and enhanced microfibrillated cellulose bonding potential by altering their size and morphology as well as consuming relatively higher energy (Nakagaito and Yano, 2004).”
Sofiah, A. G. N., Pasupuleti, J., Samykano, M., Kadirgama, K., Koh, S. P., Kiong, T. S., Pandey, A. K., Yaw, C. T., & Natarajan, S. K. (2023) · Polymers · doi:10.3390/polym15143044 · Cited by 66
“There are some devices utilized during the preli inary phases of CNF production to refine cellulose, namely, disk refiners [71,72], PFI mills [73–75], and Valley beaters [76,77].”
MethodPolymer composites with cellulose microfibrils
Panaitescu, D. M., Donescu, D., Bercu, C., Vuluga, D. M., Iorga, M. D., & Ghiurea, M. (2007) · Polymer Engineering and Science · doi:10.1002/pen.20803 · Cited by 66
Sonia, A., Dasan, K. P., & Alex, R. (2013) · Chemical Engineering Journal · doi:10.1016/j.cej.2013.04.091 · Cited by 66
Guimarães, M., Teixeira, F. G., & Tonoli, G. H. D. (2018) · Cellulose · doi:10.1007/s10570-018-1691-9 · Cited by 65
Wu, Y., Tang, Q., Yang, F. L., Xu, L., Wang, X., & Zhang, J. (2019) · Cellulose · doi:10.1007/s10570-019-02310-6 · Cited by 64
Li, Z., Zhang, Y., Anankanbil, S., & Guo, Z. (2021) · Trends in Food Science & Technology · doi:10.1016/j.tifs.2021.03.027 · Cited by 63
Nordqvist, D., Idermark, J., Hedenqvist, M. S., Gällstedt, M., Ankerfors, M., & Lindström, T. (2007) · Biomacromolecules · doi:10.1021/bm070246x · Cited by 62
Somseemee, O., Sae‐Oui, P., & Siriwong, C. (2021) · Industrial Crops and Products · doi:10.1016/j.indcrop.2021.113881 · Cited by 61
Sun, J., Dai, L., Lv, K., Wen, Z., Li, Y., Yang, D., Yan, H., Liu, X., Liu, C., & Li, M. (2024) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2024.103177 · Cited by 60
Li, S., Li, C., Li, C., Yan, M., Wu, Y., Cao, J., & He, S. (2013) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2013.06.017 · Cited by 58
Hietala, M., Rollo, P., Kekäläinen, K., & Oksman, K. (2013) · Journal of Applied Polymer Science · doi:10.1002/app.39981 · Cited by 58
Han, G., Huan, S., Han, J., Zhang, Z., & Wu, Q. (2013) · Materials · doi:10.3390/ma7010016 · Cited by 57
“To further reduce the size of the CNPs, the suspension of CNPs was processed through a high-pressure homogenizer (Microfluidizer M-110P, Microfluidics Corp., Newton, MA, USA) with a pair of Z-shaped interaction chambers (one 200 μm ceramics, and one 87 μm diamond) under an operating pressure of 207 MPa.”
BackgroundInfluentialXu, J., Deng, X., Dong, Y., Zhou, Z., Zhang, Y., Yu, J., Cai, J., & Zhang, Y. (2020) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2020.116694 · Cited by 56
Bettaieb, F., Nechyporchuk, O., Khiari, R., Mhenni, M. F., Dufresne, A., & Belgacem, M. N. (2015) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2015.07.091 · Cited by 57
Hemp Strands: PP Composites by Injection Molding: Effect of Low Cost Physico-chemical Treatments
Mutjé, P., Gironès, J., López, A. F., Llop, M. F., & Vilaseca, F. (2006) · Journal of Reinforced Plastics and Composites · doi:10.1177/0731684406059784 · Cited by 56
“Recently, Nakagaito and Yano [20] have demonstrated that a high degree of fibrillation of the bulk fibers resulted in a stepwise increment of mechanical properties of composites.”
BackgroundIsolation and characterization of cellulose nanowhiskers from Acacia caesia plant
Thomas, S. K., Begum, P. M. S., D., M. D. C., Salim, N. V., Hameed, N., Rangappa, S. M., Siengchin, S., & Parameswaranpillai, J. (2020) · Journal of Applied Polymer Science · doi:10.1002/app.50213 · Cited by 55
Hunt, J. F., Leng, W., & Tajvidi, M. (2017) · Wood and Fiber Science · Cited by 54
Ninomiya, K., Abe, M., Tsukegi, T., Kuroda, K., Tsuge, Y., Ogino, C., Taki, K., Taima, T., Saito, J., Kimizu, M., et al. (2017) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2017.11.003 · Cited by 54
Nanofiber-reinforced biocomposites
Orasugh, J. T., Ghosh, S. K., & Chattopadhyay, D. (2020) · Elsevier eBooks · doi:10.1016/b978-0-12-819904-6.00010-4 · Cited by 54
Highly redispersible sugar beet nanofibers as reinforcement in bionanocomposites
Hietala, M., Sain, S., & Oksman, K. (2017) · Cellulose · doi:10.1007/s10570-017-1245-6 · Cited by 53
“For the past 10 years, there has been increasing interest in the use of CNFs as a biocomposite reinforcement (Nakagaito and Yano 2004; Oksman et al. 2006; Lee et al. 2014; Oksman et al. 2016).”
BackgroundCellulosic Nanocomposites from Natural Fibers for Medical Applications: A Review
Khalil, H. P. S. A., Bhat, A. H., Bakar, A. A., Tahir, P. M., Zaidul, I. S. M., & Jawaid, M. (2014) · Springer eBooks · doi:10.1007/978-3-642-45232-1_72 · Cited by 53
Medina, L., Nishiyama, Y., Daicho, K., Saito, T., Yan, M., & Berglund, L. A. (2019) · Macromolecules · doi:10.1021/acs.macromol.9b00333 · Cited by 52
Öztürk, B. (2010) · Fibers and Polymers · doi:10.1007/s12221-010-0464-3 · Cited by 52
Liu, Y., Wang, P., Tian, J., Seidi, F., Guo, J., Zhu, W., Xiao, H., & Song, J. (2022) · Polymers · doi:10.3390/polym14091806 · Cited by 51
“industry, the fibers are usually subjected to beating [16] or refining [17] to enhance their bonding capacity to meet the requirements of paper strength.”
BackgroundStress transfer in microfibrillated cellulose reinforced poly(vinyl alcohol) composites
Tanpichai, S., Sampson, W. W., & Eichhorn, S. J. (2014) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2014.06.014 · Cited by 51
“The strength of MFC reinforced phenol formaldehyde resin composites was found to increase by ~50 % compared to the pure resin [23].”
BackgroundProperties of Polymer Composites with Cellulose Microfibrils
Panaitescu, D. M., Nicoleta, A., Ghiurea, M., Ilie, C., Radovici, C., & Iorga, M. D. (2011) · InTech eBooks · doi:10.5772/14682 · Cited by 50
Production and modification of nanofibrillated cellulose composites and potential applications
Islam, N., & Rahman, F. (2018) · Elsevier eBooks · doi:10.1016/b978-0-08-102177-4.00006-9 · Cited by 49
Rol, F., Banvillet, G., Meyer, V., Petit‐Conil, M., & Bras, J. (2018) · Journal of Materials Science · doi:10.1007/s10853-018-2414-1 · Cited by 49
Fayaz, G., Soleimanian, Y., Mhamadi, M., Turgeon, S. L., & Khalloufi, S. (2022) · Comprehensive Reviews in Food Science and Food Safety · doi:10.1111/1541-4337.12934 · Cited by 48
Li, W., Zhao, X., & Liu, S. (2013) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2013.01.052 · Cited by 48
Renewable hybrid nanocatalyst from magnetite and cellulose for treatment of textile effluents
Arantes, A. C. C., Almeida, C. D. G., Dauzakier, L. C. L., Bianchi, M. L., Wood, D. F., Williams, T., Orts, W. J., & Tonoli, G. H. D. (2017) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2017.01.007 · Cited by 47
Alle, M., Bandi, R., Lee, S. H., & Kim, J. (2020) · Elsevier eBooks · doi:10.1016/b978-0-12-817852-2.00003-2 · Cited by 47
Rantanen, J., Dimić‐Mišić, K., Kuusisto, J., & Maloney, T. C. (2015) · Cellulose · doi:10.1007/s10570-015-0777-x · Cited by 46
“Since then, various other methods have been adapted for the production of MNFC, including high-pressure homogenizers (Dufresne et al. 2000; Liimatainen et al. 2013; Nakagaito and Yano 2004; Qua et al. 2011), microfluidizers (Li et al.”
MethodEffect of tethered and free microfibrillated cellulose (MFC) on the properties of paper composites
Su, J., Mosse, W. K. J., Sharman, S., Batchelor, W. J., & Garnier, G. (2013) · Cellulose · doi:10.1007/s10570-013-9955-x · Cited by 46
“Microfibrillated cellulose (MFC), made by a mechanical (Nakagaito and Yano 2004; Iwamoto et al. 2007; Saito et al. 2007), acid hydrolysis (Saı̈d Azizi Samir et al.”
MethodJanardhnan, S., & Sain, M. M. (2011) · BioResources · doi:10.15376/biores.6.2.1242-1250 · Cited by 45
Ren, S., Sun, X., Lei, T., & Wu, Q. (2014) · Journal of Nanomaterials · doi:10.1155/2014/582913 · Cited by 44
Xu, Y. B., Yang, S., Zhao, P., Wu, M., Song, X., & Ragauskas, A. J. (2020) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2020.117253 · Cited by 44
Deep eutectic solvent pretreatment for green preparation of nanocellulose
Tong, J., Hu, W., Qin, Y., & Liu, Y. (2023) · Cellulose · doi:10.1007/s10570-023-05154-3 · Cited by 45
“External tremors are accompanied by internal tremors to prepare the pulp for subsequent homogenization treatment (Nakagaito and Yano 2004).”
BackgroundKwon, J. H., Lee, S. H., Ayrılmış, N., & Han, T. H. (2015) · International Journal of Adhesion and Adhesives · doi:10.1016/j.ijadhadh.2015.04.002 · Cited by 44
Starch replacement in gluten free bread by cellulose and fibrillated cellulose
Ren, Y., Linter, B. R., & Foster, T. J. (2020) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2020.105957 · Cited by 43
Hop, T. T. T., Mai, D. T., Cong, T. D., Nhi, T. T. Y., Loi, V. D., Hương, N. T. M., & Tung, N. T. (2022) · Results in Chemistry · doi:10.1016/j.rechem.2022.100540 · Cited by 43
Thermo-mechanical pulping as a pretreatment for agricultural biomass as biochemical conversion
González, R., Jameel, H., Chang, H., Treasure, T. H., Pirraglia, A., & Saloni, D. E. (2011) · BioResources · doi:10.15376/biores.6.2.1599-1614 · Cited by 43
“The refining of pulp has been shown to produce fibers with a higher degree of fibrillation (Smook 2003; Nakagaito and Yano 2004), resulting in higher exposed surface area for enzymatic attack (Mosier et al. 2005; Hendriks and Zeeman 2009).”
BackgroundIkkala, O. T., Ras, R. H. A., Houbenov, N., Ruokolainen, J., Pääkkö, M., Laine, J., Leskelä, M. A., Berglund, L. A., Lindström, T., ten Brinke, G., et al. (2009) · Faraday Discussions · doi:10.1039/b905204f · Cited by 42
Winter, A., Andorfer, L., Herzele, S., Zimmermann, T., Saake, B., Edler, M., Grießer, T., Konnerth, J., & Gindl‐Altmutter, W. (2016) · Journal of Materials Science · doi:10.1007/s10853-016-0439-x · Cited by 42
Interactions between microfibrillar cellulose and carboxymethyl cellulose in an aqueous suspension
Agarwal, D., MacNaughtan, W., & Foster, T. J. (2018) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2017.12.086 · Cited by 42
Wood‐Derived Systems for Sustainable Oil/Water Separation
Fang, Y. Z., Jing, C., Li, G. L., Ling, S., Wang, Z., Lü, P., Li, Q., Dai, C., Gao, S., Chen, B., et al. (2021) · Advanced Sustainable Systems · doi:10.1002/adsu.202100039 · Cited by 42
de Carvalho, A. P. A., Santos, R. É. P. D. D., & Conte‐Júnior, C. A. (2024) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2024.123851 · Cited by 42
Takagi, H., Nakagaito, A. N., & Bistamam, M. S. A. (2013) · Journal of Reinforced Plastics and Composites · doi:10.1177/0731684413494109 · Cited by 42
“Similar web-like microstructure has been reported elsewhere.(8,14) The morphological analysis indicated the short crystalline presence in these specimens, as samples were treated with strong acid that preferentially degraded the amorphous parts of the cellulose nanofiber, due to easy penetration of hydronium ions in c…”
BackgroundSelf-citationBound water restrained by nanocellulose fibres
Hatakeyama, T., Inui, Y., Iijima, M., & Hatakeyama, H. (2012) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-012-2823-3 · Cited by 41
Reinforcement Effects from Nanodiamond in Cellulose Nanofibril Films
Morimune‐Moriya, S., Salajková, M., Zhou, Q., Nishino, T., & Berglund, L. A. (2018) · Biomacromolecules · doi:10.1021/acs.biomac.8b00010 · Cited by 40
Biomedical engineering aspects of nanocellulose: a review
Rai, R., & Dhar, P. (2022) · Nanotechnology · doi:10.1088/1361-6528/ac6fef · Cited by 40
The Cellulose Nanofibers for Optoelectronic Conversion and Energy Storage
Luo, Y., Zhang, J., Li, X., Liao, C., & Li, X. (2014) · Journal of Nanomaterials · doi:10.1155/2014/654512 · Cited by 40
Cheng, L., Zhang, D., Gu, Z., Li, Z., Hong, Y., & Li, C. (2018) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2018.01.056 · Cited by 40
Chemical Composition and Properties of Wood
Stevanović, T. (2016) · Wiley eBooks · doi:10.1002/9781118773727.ch3 · Cited by 39
Effects of reinforcing fibers on airborne particle emissions from brake pads
Song, W., Park, J.-S., Choi, J., Lee, J. J., & Jang, H. (2021) · Wear · doi:10.1016/j.wear.2021.203996 · Cited by 39
Ferraro, G., Fratini, E., Sacco, P., Asaro, F., Cuomo, F., Donati, I., & Lopez, F. (2022) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2022.107614 · Cited by 40
Efficiency of Cellulose Carbonates to Produce Cellulose Nanofibers
Khiari, R., Rol, F., Brochier-Salon, M.-C., Bras, J., & Belgacem, M. N. (2019) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.8b06039 · Cited by 38
Cheng, D., Wei, P., Zhang, L., & Cai, J. (2019) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.9b02424 · Cited by 38
Fabrication of transparent paper devices from nanocellulose fiber
Dinesh, G., & Kandasubramanian, B. (2022) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2022.125707 · Cited by 38
Yoo, S., & Hsieh, J. S. (2010) · Industrial & Engineering Chemistry Research · doi:10.1021/ie901621n · Cited by 38
Rubber Nanocomposites: Latest Trends and Concepts
Ponnamma, D., Maria, H. J., Chandra, A. K., & Thomas, S. (2013) · Advanced structured materials · doi:10.1007/978-3-642-20928-4_3 · Cited by 38
Chitin and Chitosan Based Blends, Composites and Nanocomposites
Zuber, M., Zia, K. M., & Barikani, M. (2012) · Advanced structured materials · doi:10.1007/978-3-642-20940-6_3 · Cited by 39
Extraction and Production of Cellulose Nanofibers
Vázquez, A., Foresti, M. L., Morán, J., & Cyras, V. P. (2014) · Springer eBooks · doi:10.1007/978-3-642-45232-1_57 · Cited by 37
The Effect of Cellulose Nanofibers on the Properties of Starch Biopolymer
Fazeli, M., & Simão, R. A. (2018) · Macromolecular Symposia · doi:10.1002/masy.201800110 · Cited by 37
Nadeem, H., Naseri, M., Shanmugam, K., Dehghani, M., Browne, C., Miri, S., Garnier, G., & Batchelor, W. J. (2020) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2020.116911 · Cited by 36
In Situ Produced Bacterial Cellulose Nanofiber-Based Hybrids for Nanocomposites
Qiu, K., & Netravali, A. N. (2017) · Fibers · doi:10.3390/fib5030031 · Cited by 36
Cellulose-Based Nanocomposites
Berglund, L. A. (2005) · CRC Press eBooks · doi:10.1201/9780203508206.ch26 · Cited by 36
Tian, X., Lü, P., Song, X., Nie, S., Liu, Y., Liu, M., & Wang, Z. (2017) · Cellulose · doi:10.1007/s10570-017-1382-y · Cited by 35
“To produce MFC, the patterns need to be chemically or mechanically broken down by fiber delamination and fibrillation using technical methods that are conducted or in combination (Nakagaito and Yano 2004; Isogai et al. 2011; Espinosa et al. 2017).”
MethodHuang, W. (2017) · Elsevier eBooks · doi:10.1016/b978-0-323-48019-2.00005-0 · Cited by 35
Bai, H., Li, Y., Wang, W., Chen, G., Rojas, O. J., Dong, W., & Liu, X. (2015) · Cellulose · doi:10.1007/s10570-015-0748-2 · Cited by 35
“Since the width of the fibrils in (M/NFC) are in the submicron range, they may be loosely considered as high-aspect nanofibers (Nakagaito and Yano 2008; Nakagaito et al. 2009; Stenstad et al. 2008; Nakagaito and Yano 2004, 2005).”
BackgroundFreire, C. S. R., Fernandes, S. C. M., Silvestre, A. J. D., & Neto, C. P. (2012) · Holzforschung · doi:10.1515/hf-2012-0127 · Cited by 34
“The nanocomposites of this category, in which the micro- and nanofibrillated cellulose (MFC and NFC, respectively), cellulose whiskers, and bacterial cellulose (BC) play an essential role, have a wide range of application domain (Nakagaito and Yano 2004, 2005 ; Nakagaito et al.”
BackgroundBenkaddour, A., Jradi, K., Robert, S., & Daneault, C. (2013) · Nanomaterials · doi:10.3390/nano3040638 · Cited by 34
“In the case of microfibrillated celluloses (MFCs), they continue to exist as interconnected nanofibrillar structures even after intense attrition from multiple passes through high intensity homogenizers [22].”
Background
Metadata
- Authors
- Nakagaito, A. N., & Yano, H.
- Affiliations
- Kyoto University (JP)
- Corresponding author
- Yano, H.
- Venue
- Applied Physics A: Materials Science & Processing
- Published
- 2004-03-01
- Volume
- 78
- Issue
- 4
- Pages
- 547-552
- ISSN
- 0947-8396 (ISSN-L)
- 1432-0630
- OpenAlex
- W2035264658
- Cited by
- 608
- References
- 2
- Citations by year
- 2026: 9 · 2025: 14 · 2024: 22 · 2023: 23 · 2022: 37 · 2021: 43 · 2020: 42 · 2019: 35 · 2018: 37 · 2017: 40 · 2016: 33 · 2015: 43 · 2014: 35 · 2013: 37 · 2012: 29
- FWCI
- 8.59
- Type
- journal article
- Language
- en
- Open access
- Licence
- cc-by-nc-nd
- www.springer.com/tdm (tdm)
- Locations
- Applied Physics A (publishedVersion)
- Institutional Repositories DataBase (IRDB) (submittedVersion, cc-by-nc-nd)
- Topics
- Physical Sciences › Materials Science › Polymers and Plastics › Natural Fiber Reinforced Composites
- Physical Sciences › Materials Science › Biomaterials › Advanced Cellulose Research Studies
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Material Properties and Processing
- Keywords
- kraft pulp, natural fiber composites, phenolic resin, high-pressure homogenization, pulp refining, mechanical properties, flexural strength, water retention, surface area, cellulose nanocomposites
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.