The effect of morphological changes from pulp fiber towards nano-scale fibrillated cellulose on the mechanical properties of high-strength plant fiber based composites
Open accessThe DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
Fibrillated kraft pulp impregnated with phenolic resin was compressed under an extremely high pressure of 100 MPa to produce high strength cellulose nanocomposites. To evaluate how the degree of fibrillation of pulp fiber affects the mechanical properties of the final composites, kraft pulp subjected to various levels of refining and high pressure homogenization treatments was used as raw material with different phenolic resin contents. It was found that fibrillation solely of the surface of the fibers is not effective in improving composite strength, though there is a distinct point in the fibrillation stage at which an abrupt increase in the mechanical properties of composites occurs. In the range between 16 and 30 passes through refiner treatments, pulp fibers underwent a degree of fibrillation that resulted in a stepwise increment of mechanical properties, most strikingly in bending strength. This increase was attributed to the complete fibrillation of the bulk of the fibers. For additional high pressure homogenization-treated pulps, composite strength increased linearly against water retention values, which characterize the cellulose’s exposed surface area, and reached maximum value at 14 passes through the homogenizer.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“They observed that the disintegration could be improved by increasing the number of passes to 30 times.”
From Cellulosic Bionanocomposites: A Review of Preparation, Properties and Applications (2010) · cites this paper as [83]
Citations
Cites
Some microrheological aspects of wood-pulp fibres subjected to fatigue loading
Hamad, W. Y. (1997) · Cellulose · doi:10.1023/a:1018463117874 · Cited by 29
Modeling of the particle breakage kinetics in the wet mills for the paper industry
Roux, J., & Mayade, T. L. (1999) · Powder Technology · doi:10.1016/s0032-5910(99)00143-6 · Cited by 22
Cited by
Items 401–500 of 702
Properties of cellulose reinforced composites: A review
Ofem, M. I., Ene, E. B., Ubi, P. A., Odey, S., & Fakorede, D. O. (2020) · Nigerian Journal of Technology · doi:10.4314/njt.v39i2.9 · Cited by 14
“Compared to the pure resin MFC reinforced phenol formaldehyde composites were found to increase by ~50 % [109].”
BackgroundEnvironmental Properties and Applications of Cellulose and Chitin-Based Bionanocomposites
Zhang, R., & Xu, H. (2022) · Advanced structured materials · doi:10.1007/978-3-031-13343-5_4 · Cited by 14
Production of food bioactive-loaded nanostructures by high-pressure homogenization
Fernandez-Avila, C., Hebishy, E., Donsì, F., Arranz, E., & Trujillo, A. J. (2019) · Elsevier eBooks · doi:10.1016/b978-0-12-815671-1.00006-8 · Cited by 14
Barabanshchikov, Y., Pham, H., & Usanova, K. I. (2021) · Materials · doi:10.3390/ma14226933 · Cited by 14
Characterization and Processing of Nanocellulose Thermosetting Composites
Sabo, R. C., Elhajjar, R. F., Clemons, C. M., & Pillai, K. M. (2014) · Springer eBooks · doi:10.1007/978-3-642-45232-1_64 · Cited by 14
Structural characteristics of nanofibrillated cellulose mats: Effect of preparation conditions
Sim, K., Ryu, J.-H., & Youn, H. J. (2015) · Fibers and Polymers · doi:10.1007/s12221-015-0294-4 · Cited by 14
Développement de nouveaux matériaux d'emballage à partir de micro- et nano-fibrilles de cellulose
Guezennec, C. (2012) · theses.fr (ABES) · doi:10.70675/286430e9z7fccz4957z844bz617cae91146a · Cited by 14
Nanocelluloses: Sources, Types, Unique Properties, Market, and Regulations
Jeevanandam, J., Ling, J. K. U., Tiong, M., Barhoum, A., Chan, Y. S., Acquah, C., & Danquah, M. K. (2022) · Springer eBooks · doi:10.1007/978-3-030-89621-8_4 · Cited by 13
Mechanical behaviors of composites made of natural fibers through environmentally friendly treatment
Sun, S., Pillay, S. B., & Ning, H. (2024) · Journal of Thermoplastic Composite Materials · doi:10.1177/08927057241239954 · Cited by 13
Multifunctional Ternary Polymeric Nanocomposites Based on Cellulosic Nanoreinforcements
Puglia, D., Fortunati, E., Santulli, C., & Kenny, J. M. (2014) · Wiley eBooks · doi:10.1002/9781118872246.ch6 · Cited by 13
Overview of the Preparation Methods of Nano-scale Cellulose
Park, C.-W., Han, S.-Y., 남궁현우, Seo, P.-N., & Lee, S. H. (2017) · Journal of Korea Technical Association of The Pulp and Paper Industry · doi:10.7584/jktappi.2017.02.49.1.9 · Cited by 13
Preparation and Properties of Chitosan/Nanocrystalline Cellulose Composite Films for Food Packaging
Dong, F., Li, S., Yan, M., & Li, C. (2014) · Asian Journal of Chemistry · doi:10.14233/ajchem.2014.18312 · Cited by 13
Bio-based Wood Polymer Nanocomposites: A Sustainable High-Performance Material for Future
Hazarika, A., Baishya, P., & Maji, T. K. (2015) · Advanced structured materials · doi:10.1007/978-81-322-2470-9_8 · Cited by 13
Preparation of cellulose nanocomposites
Dufresne, A. (2011) · Elsevier eBooks · doi:10.1533/9780857092281.1.82 · Cited by 13
Nanocellulose and Nanocomposites
Singla, R., Guliani, A., Kumari, A., & Yadav, S. K. (2016) · Springer eBooks · doi:10.1007/978-981-10-0818-4_5 · Cited by 13
Key issues in reinforcement involving nanocellulose
Robles, E., Labidi, J., Halász, K., & Csóka, L. (2017) · Elsevier eBooks · doi:10.1016/b978-0-08-100957-4.00018-8 · Cited by 13
Fabrication of Cellulose Nanofiber Reinforced Thermoplastic Composites
Lee, J., Lee, J., Lim, D., & Kim, K.-Y. (2018) · Fibers and Polymers · doi:10.1007/s12221-018-8279-8 · Cited by 13
Johnson, R. K. (2010) · VTechWorks (Virginia Tech) · Cited by 13
Zha, L., Yan, M., Berglund, L. A., & Zhou, Q. (2024) · Biomacromolecules · doi:10.1021/acs.biomac.4c00295 · Cited by 12
Purkayastha, S., Prakash, M., Ghosh, A. K., & Saha, S. (2022) · Polymer Composites · doi:10.1002/pc.26734 · Cited by 12
Lovely, B., Kim, Y., Huang, H., Zink-Sharp, A., & Roman, M. (2025) · Carbohydrate Polymer Technologies and Applications · doi:10.1016/j.carpta.2025.100739 · Cited by 12
“Multiple passes or cycles are often required in homogenization (Nakagaito & Yano, 2004), where the number of cycles determines the final homogenates ’ degree of fibrillation and subsequent properties (Davoudpour et al., 2015; Kalia et al., 2014).”
Sukhtesaraie, A., & Hosseini, S. B. (2016) · Journal of Asian Ceramic Societies · doi:10.1016/j.jascer.2016.01.002 · Cited by 12
Yildirim, N., & Shaler, S. M. (2016) · Materials Research Express · doi:10.1088/2053-1591/3/10/105017 · Cited by 12
Structure-property relationships of thermoset nanocomposites
Puglia, D., & Kenny, J. M. (2018) · Elsevier eBooks · doi:10.1016/b978-0-08-101021-1.00007-1 · Cited by 12
NMR Relaxometry Studies on the Drying Kinetics of Cellulose Nanofibers
Suekuni, M. T., D’Souza, N., & Allgeier, A. M. (2022) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.1c04878 · Cited by 12
Characterization of vegetable fibers and their application in cementitious composites
Correia, V. D. C., dos Santos, S. F., Tonoli, G. H. D., & Savastano, H. (2016) · Elsevier eBooks · doi:10.1016/b978-0-08-100038-0.00004-4 · Cited by 14
New Products and Product Categories in the Global Forest Sector
Cai, Z., Rudie, A. W., Stark, N. M., Sabo, R. C., & Ralph, S. A. (2013) · CRC Press eBooks · doi:10.1201/b16186-11 · Cited by 12
Cellulose Nanofibrils as a Functional Material
Kettunen, M. (2013) · Aaltodoc (Aalto University) · Cited by 12
Cellulose nanofiber in the food industry: a review of its applications, challenges, and prospects
Liang, J., Xu, B., Liu, P., Bai, C., Lu, S., Ma, T., & Song, Y. (2025) · Food Innovation and Advances · doi:10.48130/fia-0025-0033 · Cited by 11
Mandal, M., Gogoi, G., Dutta, N., & Maji, T. K. (2021) · Elsevier eBooks · doi:10.1016/b978-0-12-821497-8.00022-8 · Cited by 11
A Review on Barrier Properties of Nanocellulose and Polylactic acid Composites
Parvathy, S. U., Hema, S., Sajith, M., Sulthan, R., Sreelekshmi, C., Sambhudevan, S., & Shankar, B. (2022) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/1258/1/012017 · Cited by 11
Preparation of gelatin-based films modified with nanocrystalline cellulose
Yang, S., Li, H., & Sun, H. (2018) · Iranian Polymer Journal · doi:10.1007/s13726-018-0641-6 · Cited by 11
Drug-Delivery Applications of Cellulose Nanofibrils
Singh, I., Sharma, A. K., & Park, B.-D. (2016) · Elsevier eBooks · doi:10.1016/b978-0-323-47347-7.00004-5 · Cited by 11
Biobased and biodegradable polymer nanocomposites
Qiu, K. (2012) · eCommons (Cornell University) · Cited by 11
Rheology and flocculation of polymer-modified microfibrillated cellulose suspensions
Karppinen, A. (2014) · Aaltodoc (Aalto University) · Cited by 11
Nanoselüloz üretim teknolojisi
Tozluoğlu, A., Çöpür, Y., Özyürek, Ö., & Çıtlak, S. (2015) · Turkish Journal of Forestry | Türkiye Ormancılık Dergisi · doi:10.18182/tjf.09718 · Cited by 10
Hybrid nanocomposites based on cellulose nanocrystals/nanofibrils: From preparation to applications
Mohit, H., Kumar, G. H., Sanjay, M., Siengchin, S., & Ramesh, P. (2021) · Elsevier eBooks · doi:10.1016/b978-0-12-822906-4.00009-8 · Cited by 10
Fragment analysis of different size-reduced lignocellulosic pulps by hydrodynamic fractionation
Suopajärvi, T., Liimatainen, H., & Niinimäki, J. (2011) · Cellulose · doi:10.1007/s10570-011-9615-y · Cited by 10
“In many cases, the refining used to loosen and fibrillate the fiber cell wall is followed by a high-pressure homogenization process to liberate individual nano- and microcellulose fragments (Nagaito and Yano 2004).”
MethodPei, Y., Wu, X., Xu, G., Chen, M., Zhang, Z., Zheng, X., Liu, J., & Tang, K. (2017) · Journal of Wood Chemistry and Technology · doi:10.1080/02773813.2017.1316742 · Cited by 10
Environmental Science and Engineering Applications of Polymer and Nanocellulose‐Based Nanocomposites
Thondavada, N., Thondavada, N., Chokkareddy, R., Chokkareddy, R., Nuthalapati, V. N., Nuthalapati, V. N., Redhi, G. G., & Redhi, G. G. (2019) · Wiley eBooks · doi:10.1002/9781119555346.ch6 · Cited by 10
Nanocellulose-based composites for EMI shielding applications
Anju, V. P. (2020) · Elsevier eBooks · doi:10.1016/b978-0-12-822350-5.00006-0 · Cited by 10
Cellulose Nanofibrils as Reinforcement in the Process Manufacture of Paper Handsheets
Costa, L. R., Silva, L. E., Matos, L. C., Tonoli, G. H. D., & Hein, P. R. G. (2021) · Journal of Natural Fibers · doi:10.1080/15440478.2021.1958415 · Cited by 10
“This mechanical process can cause irreversible changes in cellulosic fibers and also increase their binding potentials (Nakagaito and Yano 2004).”
BackgroundA METHOD FOR ISOLATING CELLULOSE NANOFIBRILS FROM WOOD AND THEIR MORPHOLOGICAL CHARACTERISTICS
Chen, W., Yu, H., Li, P., JIANG, N., & Chen, P. (2010) · Acta Polymerica Sinica · doi:10.3724/sp.j.1105.2010.09438 · Cited by 10
Characterization of Cellulose Nanocrystals Grafted with Organic Acid Chloride of Different Sizes
de Menezes, A. J., Longo, E., Leite, F. L., & Dufresne, A. (2014) · JOURNAL OF RENEWABLE MATERIALS · doi:10.7569/jrm.2014.634121 · Cited by 10
Preparation and Properties of Nanopolysaccharides
Lavoine, N., Durmaz, E., & Trovagunta, R. (2019) · Springer series in biomaterials science and engineering · doi:10.1007/978-981-15-0913-1_1 · Cited by 10
Atari, M., Mohammadalizadeh, Z., Kharazi, A. Z., & Javanmard, S. H. (2022) · Polymer-Plastics Technology and Materials · doi:10.1080/25740881.2021.2022161 · Cited by 10
“Morphology of fibers is one of the most important factors in the mechanical properties of electrospun fibers.([69]) According to the literature, it is proved that fibers without uniformity may not have satisfying mechanical properties, and upon exposure to tensile”
BackgroundXu, Y., & Rowell, R. M. (2011) · ACS symposium series · doi:10.1021/bk-2011-1067.ch013 · Cited by 10
NANOCELLULOSE: PREPARATION, CHARACTERIZATION, SUPRAMOLECULAR MODELING, AND ITS LIFE CYCLE ASSESSMENT
Li, Q. Q. (2012) · VTechWorks (Virginia Tech) · Cited by 10
Interfacial forces in nanocellulose based composite materials
Olszewska, A. (2013) · Aaltodoc (Aalto University) · Cited by 10
Modification chimique de surface de NanoFibrilles de Cellulose (NFC)
Missoum, K. (2012) · theses.fr (ABES) · doi:10.70675/67037659z43e2z4708z8815zf3832ec31b6d · Cited by 10
“…either by casting (Andresen et al. 2007; Andresen et al. 2006; Dufresne et al. 1997; Saito et al. 2006b) or using a handsheet former / vacuum filtered (Henriksson et al. 2008; Iwamoto et al. 2007; Iwamoto et al. 2005; Nakagaito and Yano 2008; Nakagaito and Yano 2004; Seydibeyoğlu and Oksman 2008).”
MethodSun, S., Yan, Y., Zhou, C., Pillay, S. B., & Ning, H. (2024) · Polymer Composites · doi:10.1002/pc.28824 · Cited by 9
Valorisation of waste pulp from materials recovery facility rejects for composite applications
Herrera, N., Ordóñez, D. F., Gaduan, A. N., Singkronart, K., Hayes, D. J. M., Puri, D. J., & Lee, K. (2024) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2024.108108 · Cited by 9
Unbleached Nanofibrillated Cellulose as Additive and Coating for Kraft Paper
Lengowski, E. C., Júnior, E. A. B., Simon, L. C., Izidio, V. M. C., de Andrade, A. S., Nisgoski, S., & de Muñiz, G. I. B. (2024) · Coatings · doi:10.3390/coatings14080962 · Cited by 9
Wood Microfibres - Effective Reinforcing Agents for Composites
Chakraborty, A., Sain, M. M., & Kortschot, M. T. (2006) · SAE technical papers on CD-ROM/SAE technical paper series · doi:10.4271/2006-01-0106 · Cited by 9
Improving futuristic nanomaterial researches in forestry sector: an overview
Porwal, P., Porwal, S., Singh, S. P., Husen, A., & Singh, A. K. (2020) · Elsevier eBooks · doi:10.1016/b978-0-12-817852-2.00021-4 · Cited by 9
Hamimed, S., Abdeljelil, N., Landoulsi, A., Chatti, A., Aljabali, A. A. A., & Barhoum, A. (2022) · Springer eBooks · doi:10.1007/978-3-030-89621-8_15 · Cited by 9
Processing and Properties of Microfibrillated Cellulose.
Spence, K. L. (2011) · NCSU Libraries Repository (North Carolina State University Libraries) · Cited by 9
Date Palm Nanofibres and Composites
Khiari, R., & Belgacem, M. N. (2020) · Springer eBooks · doi:10.1007/978-981-15-9339-0_6 · Cited by 9
A finger-jointing model for describing ultrastructures of cellulose microfibrils
Fugetsu, B., Vipin, A. K., Takiguchi, S., Sakata, I., & Endo, M. (2021) · Scientific Reports · doi:10.1038/s41598-021-89435-6 · Cited by 9
“(2) and (3), Cam denotes the crystal/amorphous ratios, I002 and I200 denote the maximum intensities of diffractions of 002 (in case of Iα), and 200 (in case of Iβ), respectively, and Iam is the maximum intensities of the diffraction of amorphous (2θ = 18.”
BackgroundOrelma, H., Kunnari, V., Yamamoto, A., Valkonen, M., Rautkari, L., & Korpela, A. (2023) · Cellulose · doi:10.1007/s10570-023-05059-1 · Cited by 9
Preparation of Nanofibrillated Cellulose and Cellulose Whiskers
Plackett, D., & Iotti, M. (2013) · Wiley eBooks · doi:10.1002/9781118609958.ch14 · Cited by 9
Extraction and Characterization of Cellulose Nanofibers from Banana Plant
Deepa, B., Abraham, E., Koshy, R. R., Pothan, L. A., & Thomas, S. (2014) · Springer eBooks · doi:10.1007/978-3-642-45232-1_54 · Cited by 9
“These methods include treatments, such as pulp beating [22], high-pressure homogenizing [23], ultrasonic technique [24], and cryocrushing [25].”
Life cycle energy assessment of wood-based Nano Fibrillated Cellulose
Nguyen, T. D. (2014) · Chalmers Publication Library (Chalmers University of Technology) · Cited by 9
Correia, V. D. C. (2015) · Digital Library of Theses and Dissertations (Universidade de São Paulo) · doi:10.11606/t.74.2015.tde-04092015-104346 · Cited by 9
Joshi, G., & Chauhan, S. (2025) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2025.131333 · Cited by 8
Nanocellulose for Sustainable Future Applications
AI-Jawhari, I. F. H. (2020) · Springer eBooks · doi:10.1007/978-3-030-11155-7_16-1 · Cited by 8
Production and characterization of nanofibrillated cellulose powder
Lopes, M. S., Carneiro, M. E., Bento, A. V., Potulski, D. C., & de Muñiz, G. I. B. (2021) · Scientia Forestalis · doi:10.18671/scifor.v49n129.04 · Cited by 8
“Therefore, nanofibrillated cellulose (NFC) is a type of nanocellulose obtained from the mechanical defibrillation of cellulosic pulp or wood fibers with or without the application of pre-treatments (Nakagaito & Yano, 2004).”
BackgroundJiang, X., Mietner, J. B., & Navarro, J. R. G. (2023) · Cellulose · doi:10.1007/s10570-022-04983-y · Cited by 8
Freire, C. S. R., Silvestre, A. J. D., Gandini, A., & Neto, C. P. (2011) · O Papel: revista mensal de tecnologia em celulose e papel · Cited by 8
Caracterización de propiedades mecánicas de las fibras de banano de la corteza y el cuerpo del tallo
Ruiz-Galarza, S., Hernández‐Simón, L. M., Piovan, M. T., Carrión, L., & Narváez‐Muñoz, C. (2016) · Científica · doi:10.46842/ipn.cien.v20n1a03 · Cited by 8
Natural Polymer‐Based Nanocomposites: A Greener Approach for the Future
Baishya, P., Mandal, M., Gogoi, P., & Maji, T. K. (2017) · Wiley eBooks · doi:10.1002/9781119441632.ch139 · Cited by 8
Jiang, F. (2020) · Wiley eBooks · doi:10.1002/9783527342587.ch4 · Cited by 8
Nanocellulose composites in the pulp and paper industry
Padzil, F. N. M., Lee, C. H., Lee, S. H., Asa’ari, A. Z. M., Chin, K. L., Yasim‐Anuar, T. A. T., & Ariffin, H. (2022) · Elsevier eBooks · doi:10.1016/b978-0-323-89909-3.00022-5 · Cited by 8
Nanocomposites Based on Starch and Fibers of Natural Origin
Satyanarayana, K. G., Wypych, F., Woehl, M. A., Ramos, L. P., & Marangoni, R. (2011) · Wiley eBooks · doi:10.1002/9781118203699.ch17 · Cited by 8
Cheng, Q., Tong, Z., Dempere, L. A., Ingram, L. O., Wang, L., & Zhu, J. Y. (2012) · Journal of Polymers and the Environment · doi:10.1007/s10924-012-0562-y · Cited by 8
Choi, S. R., & Lee, J. M. (2020) · Journal of Korea Technical Association of The Pulp and Paper Industry · doi:10.7584/jktappi.2020.06.52.3.50 · Cited by 7
Obtención de nanocelulosa a partir de residuos postcosecha
Pérez, R. H., Castillo, A. Á., Paredes, A. O., & Delgado, A. M. S. (2021) · Mundo Nano Revista Interdisciplinaria en Nanociencia y Nanotecnología · doi:10.22201/ceiich.24485691e.2023.30.69662 · Cited by 7
Kowalska-Baron, A., Choudhary, P., & Montes, D. (2018) · TU repository (Lodz University of Technology) · doi:10.34658/bfs.2011.75.2.3-14 · Cited by 7
Surface Interactions between Bacterial Nanocellulose and B-Complex Vitamins
Sánchez-Osorno, D. M., Gomez‐Maldonado, D., Castro, C. I., & Peresin, M. S. (2020) · Molecules · doi:10.3390/molecules25184041 · Cited by 7
“Furthermore, bacterial nanocellulose (BNC) fibers possess a small thermal expansion coefficient, similar to that of glass, with a high Young’s modulus (134 GPa), and a high tensile strength (2 GPa) [7,8].”
BackgroundZhong, A., Luo, J., Wang, Y., Xu, G., & Hu, J. Q. (2020) · Polymer Composites · doi:10.1002/pc.25800 · Cited by 7
A Comparative Study of Cellulose Nanocomposite Derived from Algae and Bacteria and Its Applications
Hamouda, R. A., & Abdel‐Hamid, M. S. (2022) · Engineering materials · doi:10.1007/978-3-030-94319-6_7 · Cited by 7
Chapter 6: New Products and Product Categories in the Global Forest Sector
Cai, Z., Rudie, A. W., Stark, N. M., Sabo, R. C., & Ralph, S. A. (2013) · Cited by 7
Alimohammadzadeh, R., Medina, L., Deiana, L., Berglund, L. A., & Córdova, A. (2020) · ACS Omega · doi:10.1021/acsomega.0c00978 · Cited by 7
Nanocellulose from the Appalachian Hardwood Forest and Its Potential Applications
Hassanzadeh, M. (2018) · The Research Repository @ WVU (West Virginia University) · doi:10.33915/etd.5780 · Cited by 7
Hamou, K. B. (2015) · theses.fr (ABES) · doi:10.70675/d589f483z345dz422az98ccz71b8a223de3d · Cited by 7
Développement de matériaux super-isolants thermiques à partir de nano-fibres de cellulose
Jiménez-Saelices, C. (2016) · theses.fr (ABES) · doi:10.70675/25ac96b5z665bz411dz834cz820d1a48ccc1 · Cited by 7
Fan, W., Tu, Z., Huang, C.-M., Huang, K., & Yeh, J. (2016) · Polymers for Advanced Technologies · doi:10.1002/pat.3971 · Cited by 6
Uetani, K., Kasuya, K., Koga, H., & Nogi, M. (2020) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2020.117460 · Cited by 6
Preparation, Properties, and Advanced Functional Applications of Nanocellulose
Xu, K., Chen, Y., Du, G., & Wang, S. (2022) · IntechOpen eBooks · doi:10.5772/intechopen.105807 · Cited by 6
Nanotecnologia: ciência e engenharia
Graeff, C. F. O., Leão, A. L., Rosa, A. H., Tusset, Â. M., Bueno, Á. M., de Pontes, B. R., Cherian, B. M., Gonçalves, D. F. C., Botelho, E. C., Edwards, E. R., et al. (2012) · LA Referencia (Red Federada de Repositorios Institucionales de Publicaciones Científicas) · Cited by 6
Hänninen, T., Hughes, M., Baur, E., Otremba, F., Huber, T., Graupner, N., Müssig, J., Prömper, E., van den Oever, M., Bos, H. L., et al. (2010) · Wiley eBooks · doi:10.1002/9780470660324.ch19 · Cited by 6
Pérez, R. H., Paredes, A. O., Salgado-Delgado, R., & Delgado, A. M. S. (2021) · International Journal of Environmental & Analytical Chemistry · doi:10.1080/03067319.2021.1972991 · Cited by 6
The Concept of a 3D-Printed Microfluidic Device on Oxyfluorinated PDMS Substrates
Doronin, F., Rytikov, G. O., Evdokimov, A. G., Savel’ev, M., Rudakova, A., Rudyak, Y. V., & Nazarov, V. G. (2025) · Polymers · doi:10.3390/polym17223044 · Cited by 6
Preparation of Absorbent Foam Based on Softwood Kraft Pulp: Advancing from Gram to Kilogram Scale
Brodin, F. W., Sonavane, Y., & Theliander, H. (2013) · BioResources · doi:10.15376/biores.8.2.2099-2117 · Cited by 6
“…or to reduce the energy demand of the preparation of MFC such as mechanical cutting (Herrick et al. 1983; Turbak et al. 1983), acid hydrolysis (Pääkkö et al. 2007; Henriksson et al. 2007), enzymatic treatment (Pääkkö et al. 2007; Henriksson et al. 2007), TEMPO oxidation (Saito et al. 2006),…”
BackgroundMethodTHE USE OF MEMBRANE FILTRATION TO IMPROVE THE PROPERTIES OF EXTRACTED WOOD COMPONENTS
Helander, M. (2014) · DiVA (Digitala Vetenskapliga Arkivet) · Cited by 6
Kundu, S., Mitra, D., & Das, M. (2024) · Polymer · doi:10.1016/j.polymer.2024.127696 · Cited by 5
Krishnan, A., Paul, S., Phiri, R., Srisuk, R., Singh, M. K., Palaniappan, S. K., Rangappa, S. M., D., M. D. C., Ajithkumar, T. G., & Siengchin, S. (2026) · ACS Omega · doi:10.1021/acsomega.5c09694 · Cited by 5
Nanocelluloses: Sources, Types, Unique Properties, Market, and Regulations
Jeevanandam, J., Ling, J. K. U., Tiong, M., Barhoum, A., Chan, Y. S., Acquah, C., & Danquah, M. K. (2021) · Springer eBooks · doi:10.1007/978-3-030-62976-2_4-1 · Cited by 5
Jagtiani, E. (2022) · Advances in Biochips · doi:10.25082/ab.2022.01.002 · Cited by 5
Duanmu, J., Gamstedt, E. K., & Rosling, A. (2012) · Journal of Composite Materials · doi:10.1177/0021998312437000 · Cited by 5
Metadata
- Authors
- Nakagaito, A. N., & Yano, H.
- Affiliations
- Kyoto University (JP)
- Corresponding author
- Yano, H.
- Venue
- Applied Physics A: Materials Science & Processing
- Published
- 2004-03-01
- Volume
- 78
- Issue
- 4
- Pages
- 547-552
- ISSN
- 0947-8396 (ISSN-L)
- 1432-0630
- OpenAlex
- W2035264658
- Cited by
- 608
- References
- 2
- Citations by year
- 2026: 9 · 2025: 14 · 2024: 22 · 2023: 23 · 2022: 37 · 2021: 43 · 2020: 42 · 2019: 35 · 2018: 37 · 2017: 40 · 2016: 33 · 2015: 43 · 2014: 35 · 2013: 37 · 2012: 29
- FWCI
- 8.59
- Type
- journal article
- Language
- en
- Open access
- Licence
- cc-by-nc-nd
- www.springer.com/tdm (tdm)
- Locations
- Applied Physics A (publishedVersion)
- Institutional Repositories DataBase (IRDB) (submittedVersion, cc-by-nc-nd)
- Topics
- Physical Sciences › Materials Science › Polymers and Plastics › Natural Fiber Reinforced Composites
- Physical Sciences › Materials Science › Biomaterials › Advanced Cellulose Research Studies
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Material Properties and Processing
- Keywords
- kraft pulp, natural fiber composites, phenolic resin, high-pressure homogenization, pulp refining, mechanical properties, flexural strength, water retention, surface area, cellulose nanocomposites
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.