The effect of morphological changes from pulp fiber towards nano-scale fibrillated cellulose on the mechanical properties of high-strength plant fiber based composites
Open accessThe DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
Fibrillated kraft pulp impregnated with phenolic resin was compressed under an extremely high pressure of 100 MPa to produce high strength cellulose nanocomposites. To evaluate how the degree of fibrillation of pulp fiber affects the mechanical properties of the final composites, kraft pulp subjected to various levels of refining and high pressure homogenization treatments was used as raw material with different phenolic resin contents. It was found that fibrillation solely of the surface of the fibers is not effective in improving composite strength, though there is a distinct point in the fibrillation stage at which an abrupt increase in the mechanical properties of composites occurs. In the range between 16 and 30 passes through refiner treatments, pulp fibers underwent a degree of fibrillation that resulted in a stepwise increment of mechanical properties, most strikingly in bending strength. This increase was attributed to the complete fibrillation of the bulk of the fibers. For additional high pressure homogenization-treated pulps, composite strength increased linearly against water retention values, which characterize the cellulose’s exposed surface area, and reached maximum value at 14 passes through the homogenizer.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“They observed that the disintegration could be improved by increasing the number of passes to 30 times.”
From Cellulosic Bionanocomposites: A Review of Preparation, Properties and Applications (2010) · cites this paper as [83]
Citations
Cites
Some microrheological aspects of wood-pulp fibres subjected to fatigue loading
Hamad, W. Y. (1997) · Cellulose · doi:10.1023/a:1018463117874 · Cited by 29
Modeling of the particle breakage kinetics in the wet mills for the paper industry
Roux, J., & Mayade, T. L. (1999) · Powder Technology · doi:10.1016/s0032-5910(99)00143-6 · Cited by 22
Cited by
Items 501–600 of 702
Role of Cellulose Nanofibrils in Polymer Nanocomposites
Maia, T. H. S., Calazans, M. O., de Lima, V. H., Moreira, F. K. V., & Lucas, A. D. A. (2019) · Wiley eBooks · doi:10.1002/9783527807437.ch8 · Cited by 5
Manejo de la cascarilla de arroz como residuo postcosecha y su conversión en nanocelulosa
Pérez, R. H., Paredes, A. O., Salgado-Delgado, R., Delgado, A. M. S., Medrano, A. S., & Candia, F. R. M. (2022) · Mundo Nano Revista Interdisciplinaria en Nanociencia y Nanotecnología · doi:10.22201/ceiich.24485691e.2023.30.69697 · Cited by 5
The Processing and Mechanical Performance of Cellulose Nanofiber-based Composites
Nakagaito, A. N., Takagi, H., & Pandey, J. K. (2011) · International journal of ocean system engineering · doi:10.5574/ijose.2011.1.4.180 · Cited by 5
“The bending strength of composites made with varying cellulose morphologies, from the original kraft pulp all the way through the intermediate degrees of fibrillation, up to the nanofibers was analyzed [11].”
BackgroundSelf-citation심, 규., 윤, 혜., & 류, 재. (2013) · Journal of Korea Technical Association of The Pulp and Paper Industry · doi:10.7584/ktappi.2013.45.1.035 · Cited by 5
Zhang, S., Chai, X., & He, L. (2016) · Journal of Chromatography A · doi:10.1016/j.chroma.2016.08.038 · Cited by 5
Studies on Mechanical Properties and Morphology of Sisal Pulp Reinforced Phenolic Composites
WANG, S., Wei, C. Y., Liu, H., Gong, Y., Yang, D., Yang, P., & Liu, T. X. (2015) · Advances in Polymer Technology · doi:10.1002/adv.21557 · Cited by 5
Ishikura, Y., & Yano, H. (2019) · Journal of Applied Polymer Science · doi:10.1002/app.48192 · Cited by 5
Self-citationNano-Cellulosic Fibers from Agricultural Wastes
Khairuddin, N., Siddique, B. M., Merais, M. S., Hamzah, N. H. C., & Wahab, D. N. A. (2021) · IntechOpen eBooks · doi:10.5772/intechopen.98637 · Cited by 5
Kurtuluş, O. Ç., Ondaral, S., Emin, N., & AŞIKUZUN, E. (2023) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2023.124824 · Cited by 5
Kenaf Nanofiber/Polylactic Acid (PLA) Nanocomposite
Lasat, A. S., Abdan, K., & Ibrahim, N. A. (2011) · Key engineering materials · doi:10.4028/www.scientific.net/kem.471-472.1095 · Cited by 5
Effect of Variation Aluminum Oxide Concentration on the Modified Novolac Stalk Composite
El‐Meligy, M. G., Nagieb, Z. A., & Isis, K. (2012) · ISRN Chemical Engineering · doi:10.5402/2012/263975 · Cited by 5
Nanocellulose and Its Application for Shape-Memory Materials
Fu, S., & Tian, C. (2015) · Advanced structured materials · doi:10.1007/978-81-322-2473-0_4 · Cited by 5
Polysaccharide–Water Interaction
Hatakeyama, T., & Hatakeyama, H. (2015) · Taylor & Francis eBooks · doi:10.1081/e-ebpp-120050700 · Cited by 5
Obtenção de nanofibras de curauá e aplicação como reforço em compósitos baseados em PVA
de Souza, S. F. (2010) · Americanae (AECID Library) · Cited by 5
Tanaka, S., Kojiro, K., Horiyama, H., & Imai, T. (2025) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2025.124000 · Cited by 4
A COMPARATIVE STUDY OF CELLULOSE NANOWHISKERS (CNWs) AND CELLULOSE NANOFIBERS (CNFs)
Hu, Z., Cao, X., Guo, D., Xu, Y., WU, P., Christie, P., & Li, J. (2021) · Cellulose Chemistry and Technology · doi:10.35812/cellulosechemtechnol.2021.55.45 · Cited by 4
Kamada, Y., & Yan, J. (2021) · International Journal of Automation Technology · doi:10.20965/ijat.2021.p0475 · Cited by 4
Wang, R.-Y., Mo, W., Shen, X.-N., Li, B., & Chai, X. (2019) · Nordic Pulp & Paper Research Journal · doi:10.1515/npprj-2019-0007 · Cited by 4
“Since the water retention of pulp fibers affects the degree of fiber fibrillation (Wang and Cheng 2009, Nakagaito and Yano 2004), water removal efficiency (Taipale et al. 2010, Hubbe and Heitmann 2007), product quality (Smook 2002), and energy consumption during the papermaking process, it is an…”
BackgroundNANOCELLULOSE OBTAINED MECHANICALLY BY DIFFERENT COLLOID GRINDING INTENSITIES
Lopes, M. S., Potulski, D. C., Viana, L. M. M., Carneiro, M. E., de Muñiz, G. I. B., & de Andrade, A. S. (2019) · FLORESTA · doi:10.5380/rf.v50i1.58690 · Cited by 4
de Lima, G. G., Aggio, B. B., Matos, M., de Lima, T. A. M., Pereira, B. L., Pedro, A. C., & Magalhães, W. L. E. (2023) · Nordic Pulp & Paper Research Journal · doi:10.1515/npprj-2022-0091 · Cited by 4
Biomass nanofibrillar cellulose in nanocomposites
Usmani, M. A., Khan, I., Nayeem, S. M., Mondal, D., Bhat, A. H., Ahmed, I., & Haque, A. (2017) · Elsevier eBooks · doi:10.1016/b978-0-08-100957-4.00013-9 · Cited by 4
Moezzipour, B., Hedjazi, S., Yousefi, H., & Ahmadi, M. (2021) · Drvna industrija · doi:10.5552/drvind.2021.2025 · Cited by 4
“Thereby, the S2 layer is better exposed to mechanical actions and causes internal fibrillation during homogenization and micro-fluidization (Andresen et al., 2006; Henriksson et al., 2008; Iwamoto et al., 2005; Nakagaito and Yano, 2004; Spence et al., 2011; Turbak et al., 1983).”
BackgroundSubyakto, S., Masruchin, N., Prasetiyo, K. W., & Ismadi, I. (2013) · Indonesian Journal of Forestry Research · doi:10.20886/ijfr.2013.10.1.11-20 · Cited by 4
Nanocellulose based materials for Cell Culture
Smyth, M. (2017) · theses.fr (ABES) · doi:10.70675/7f9368f5zece3z448bzae8dz8cd541137802 · Cited by 4
Carboxylated cellulose pulp fibers: from fundamentals to applications
Sim, G. (2016) · doi:10.82308/13422 · Cited by 4
Prétraitements de la cellulose pour une nanofibrillation par extrusion
Rol, F. (2019) · theses.fr (ABES) · doi:10.70675/f49f6e09z87acz432az8e86z4028cf7a2c4c · Cited by 4
Durães, A. F. S., Moulin, J. C., dos Santos, A. D. A., Silva, M. J. F. E., Damásio, R. A. P., & Tonoli, G. H. D. (2021) · Fibers and Polymers · doi:10.1007/s12221-021-0810-7 · Cited by 3
Cotton-based Cellulose Nanomaterials for Applications in Composites and Electronics
Farahbakhsh, N. (2015) · NCSU Libraries Repository (North Carolina State University Libraries) · Cited by 3
Jing, Y. Q. (2009) · OhioLink ETD Center (Ohio Library and Information Network) · Cited by 3
Bajpai, P. (2016) · Elsevier eBooks · doi:10.1016/b978-0-12-811101-7.00004-6 · Cited by 3
Santos, E. C., Kaldéus, T., Senoro, D. B., Malmström, E., & Hult, A. (2020) · Journal of Environmental Science and Management · doi:10.47125/jesam/2020_sp1/06 · Cited by 3
“prepared by mechanical disintegration commonly using high pressure homogenizers (with range between 1630 passes through refiner treatments) (Nakagaito and Yano 2004).”
MethodFabrication and Evaluation of Cellulose‐Nanofiber‐Reinforced Green Composites
Takagi, H. (2014) · Wiley eBooks · doi:10.1002/9783527649440.ch2 · Cited by 3
Poly(vinyl Alcohol)-Cellulose and Nanocellulose Composites
Ibrahim, M. M., & El‐Zawawy, W. K. (2014) · Springer eBooks · doi:10.1007/978-3-642-45232-1_77 · Cited by 3
Mechanical Performance of Paper Pulp and Wood Glue Composite
Madyira, D. M., Mabirimisa, T., & Jen, T. (2017) · ASME International Mechanical Engineering Congress and Exposition (IMECE) · doi:10.1115/imece2017-71880 · Cited by 3
Satomitsu, I. M. A. I. (2019) · Sensors and Actuators A Physical · doi:10.1016/j.sna.2019.01.007 · Cited by 3
Eun-Ah, L. E. E., Han, S.-Y., Kwon, G., Jeong-Ki, K. I. M., Bandi, R., Dadigala, R., Ji-Soo, P. A. R. K., Chan-Woo, P. A. R. K., & Lee, S. H. (2022) · Journal of the Korean Wood Science and Technology · doi:10.5658/wood.2022.50.6.436 · Cited by 3
“- 437 - lent mechanical properties (Abe and Yano, 2012; Ji et al., 2017; Nakagaito and Yano, 2004, 2005; Okahisa et al., 2009), and have accordingly been applied in diverse fields as nanocomposite materials, in food packaging, and as components of drug delivery systems (Chen et al., 2019;…”
BackgroundSonia, A., & Dasan, K. P. (2013) · Fibers and Polymers · doi:10.1007/s12221-013-1886-5 · Cited by 3
III : Cellulosic Nanocomposites
Yano, H. (2008) · Journal of the Society of Materials Science Japan · doi:10.2472/jsms.57.310 · Cited by 3
Self-citationBombeck, P.-L., Hébert, J., & Richel, A. (2016) · BASE · doi:10.25518/1780-4507.12689 · Cited by 3
A New Type of Nanocomposite Based on Bamboo Parenchymal Cells
Shuangyan, Z., & ChuanGui, W. (2016) · Forest Products Journal · doi:10.13073/fpj-d-16-00043 · Cited by 3
Utilization of Sawmill By-Product for Making Cellulose and Its Valuable Derivatives
Choudhury, M. J., & Khan, G. M. A. (2014) · Springer eBooks · doi:10.1007/978-3-319-07578-5_9 · Cited by 3
Emulsion Graft Polymerization of Methyl Methacrylate onto Cellulose Nanofibers
Okada, H., Zhao, C., Mizuta, Y., Yoshino, K., & Sugimoto, R. (2021) · Green and Sustainable Chemistry · doi:10.4236/gsc.2021.111002 · Cited by 3
Elasticity of Cellulose Nanofibril Materials
Josefsson, G. (2015) · DiVA (Digitala Vetenskapliga Arkivet) · Cited by 3
Guimarães, M. (2015) · Americanae (AECID Library) · Cited by 3
Cellulose – Polycarbonate Nanocomposites: A novel automotive window alternative
Finkle, A. C. (2011) · UWSpace (University of Waterloo) · Cited by 3
Preparation and properties of dried nanofibrillated cellulose and its nanocomposites
Eyholzer, C. (2010) · Cited by 3
Nanocelluloses: Science and Technology
Habibi, Y. (2017) · Wiley eBooks · doi:10.1002/0471440264.pst657 · Cited by 3
Manufacturing Cellulose Nanofibers Using the Water Jet Method and Their ApplicationsPreprint
Ogura, K. (2021) · Research Square · doi:10.21203/rs.3.rs-546068/v1 · Cited by 3
A study of wood microfibre reinforced biocomposite films
Chakraborty, A. (2006) · TSpace (University of Toronto) · Cited by 3
Polymer Nanocomposite Matrix-Based Nanoproducts
AI-Jawhari, I. F. H. (2022) · Springer eBooks · doi:10.1007/978-981-16-8698-6_21 · Cited by 2
Ananthakrishnan, K., Volk, T. A., Jin, Y., Juneja, A., Therasme, O., & Kumar, D. (2025) · Bioresource Technology Reports · doi:10.1016/j.biteb.2025.102394 · Cited by 2
Prasetiyo, K. W., Fakhruzy, & Kusumaningrum, W. B. (2020) · IOP Conference Series Earth and Environmental Science · doi:10.1088/1755-1315/572/1/012042 · Cited by 2
Brito, F. J. G., Pereira-da-Silva, M. A., & Tarpani, J. R. (2023) · Composite Interfaces · doi:10.1080/09276440.2023.2248771 · Cited by 2
“Micro/nanofibrils of cellulose (MFC) have been found to expand the options for fibers in composites and improve their mechanical properties [11].”
BackgroundXue, Y. (2011) · NCSU Libraries Repository (North Carolina State University Libraries) · Cited by 2
Nanocellulose Composite Films for Packaging Applications
Jasmani, L., Adnan, S., Ainun, Z. M. A., Sapuan, S. M., & Ilyas, R. A. (2021) · Wiley eBooks · doi:10.1002/9781119381228.ch11 · Cited by 2
Nanofibers for the paper industry
Chmielarz, P., & Zaborniak, I. (2022) · Elsevier eBooks · doi:10.1016/b978-0-323-85835-9.00002-7 · Cited by 2
Spectroscopic Characterization of Renewable Nanoparticles and Their Composites
Aranguren, M. I., Mosiewicki, M. A., & Marcovich, N. E. (2013) · Wiley eBooks · doi:10.1002/9781118609958.ch21 · Cited by 2
Nanocellulose‐Based Green Nanocomposite Materials
Zhou, Q., & Butchosa, N. (2016) · Wiley eBooks · doi:10.1002/9781118911068.ch5 · Cited by 2
Jimat, D. N., & Aviceena (2018) · Springer eBooks · doi:10.1007/978-981-13-2257-0_10 · Cited by 2
Kamogawa, M., Tsujita, Y., & Kondo, T. (2024) · Journal of Fiber Science and Technology · doi:10.2115/fiberst.2024-0010 · Cited by 2
The Mechanical and it Combined with Enzymatic Preparation Methods of Microfibrillated Cellulose
Chen, W. S., Yu, H. P., Liu, Y. X., & Li, Q. (2009) · Advanced materials research · doi:10.4028/www.scientific.net/amr.87-88.393 · Cited by 2
Cellulose nanofibrils in bio-nanocomposite films and their applications
Orasugh, J. T., Ghosh, S. K., & Chattopadhyay, D. (2021) · Elsevier eBooks · doi:10.1016/b978-0-12-823381-8.00019-3 · Cited by 2
Nanocellulose-Based Materials for Heavy Metal Removal from Wastewater
Awang, N. A., Salleh, W. N. W., Yusof, N. B., Karim, Z. A., & Ismail, A. F. (2021) · Environmental chemistry for a sustainable world · doi:10.1007/978-3-030-73010-9_1 · Cited by 2
Polymer Nanocomposite Matrix-Based Nanoproducts
AI-Jawhari, I. F. H. (2021) · Springer eBooks · doi:10.1007/978-981-15-6453-6_21-1 · Cited by 2
Sustainable Lignocellulosic Nanomaterials for Future Green Applications
Ngo, T.-D., Chandra, R. P., & Ahvazi, B. C. (2021) · Springer eBooks · doi:10.1007/978-3-030-36268-3_19 · Cited by 2
Advances in the Production of Cellulose Nanomaterials and Their Use in Engineering (Bio)Plastics
Banvillet, G., Bugaut, M., Doineau, E., Taguet, A., Moigne, N. L., & Rojas, O. J. (2023) · Composites science and technology · doi:10.1007/978-981-99-2473-8_12 · Cited by 2
Nanocomposites with Cellulose Nanocrystals Extracted from Annual Plants
Ablouh, E., Bahloul, A., Kassab, Z., Faissal, A., Bouhfid, R., Qaiss, A. E. K., Sehaqui, H., Achaby, M. E., & Hassani, F. S. A. (2023) · Composites science and technology · doi:10.1007/978-981-99-2473-8_11 · Cited by 2
Valorisation des déchets cellulosiques tunisiens
Bettaieb, F. (2015) · theses.fr (ABES) · doi:10.70675/2dfec630z7c5ez4df4zb887z41a5d34053cd · Cited by 2
Gironès, J. (2006) · LA Referencia (Red Federada de Repositorios Institucionales de Publicaciones Científicas) · Cited by 2
Use of lignocellulosic materials and 3D printing for the elaboration of conductive carbon strutures
Ying, S. (2017) · theses.fr (ABES) · doi:10.70675/b29ebcfcz258fz43c8zbc14z942565d0493b · Cited by 2
Hu, Z., Cao, X., Huang, G., & Guo, D. (2021) · Research Square · doi:10.21203/rs.3.rs-277886/v1 · Cited by 2
Viscoelastic and thermal properties of natural fibre-reinforced composites
Hrabalova, M. (2011) · BOK:ePub (Universitätsbibliothek der Universität f Bodenkultur Wien) · Cited by 2
Síntesis de nanopartículas derivadas de biopolímeros extraídos de biomasa por métodos térmicos
Sánchez Ortiz, A. (2015) · El Repositorio Academico Digital de la UANL (Universidad Autónoma de Nuevo León) · Cited by 2
Preparation And Characterization Of Polyurethane Micro And Nanocomposites
Seydibeyoğlu, M. Ö. (2007) · Istanbul Technical University Academic Open Archive (Istanbul Technical University) · Cited by 2
Microfibrillated cellulose based nanomaterials
Blell, R. (2012) · theses.fr (ABES) · doi:10.70675/b642306bz62bcz49a9za603zb730a06e05f9 · Cited by 2
Tailoring Cellulose Nanocrystal, Polymer and Surfactant Interactions for Gels, Emulsions, and Foams
Hu, Z. (2015) · MacSphere (McMaster University) · Cited by 2
Conception, mise en oeuvre et caractérisation de nouveaux bio-nano-matériaux fonctionnels.
Lavoine, N. (2013) · theses.fr (ABES) · doi:10.70675/1dadcdaczebb3z4726z8788z4301b353c404 · Cited by 2
Recent Progress on Photonic Cellulose Nanocrystal Films for Sensing Applications
Deng, Z., Tao, T., Yuan, J., & Wan, C. (2024) · Current Organic Synthesis · doi:10.2174/0115701794279003240124113635 · Cited by 1
Li, H., Shaohui, Y., Xu, H., Li, X., Runan, W., Yan, Y., Li, P., Zhang, L., Wang, Y., Zu, M., et al. (2025) · Scientific Reports · doi:10.1038/s41598-025-85562-6 · Cited by 1
Advanced nanocomposites based on natural reinforcements
Nakagaito, A. N., Takagi, H., & Mohamed, N. H. N. (2015) · Elsevier eBooks · doi:10.1016/b978-0-08-100079-3.00003-x · Cited by 1
Self-citationOBTENÇÃO DE NANOFIBRAS DE CURAUÁ E APLICAÇÃO COMO REFORÇO EM COMPÓSITOS BASEADOS EM PVA
de Souza, S. F. (2010) · Aleph UCLA Undergraduate Research Journal for the Humanities and Social Sciences · Cited by 1
Otrzymywanie włókien nanocelulozy
Wąchała, R., Ramięga, T., Pyć, R., & Antczak, T. (2018) · TU repository (Lodz University of Technology) · doi:10.34658/bfs.2011.75.2.87-100 · Cited by 1
Wet Atomizing Technology of Carbon Nanotube and Cellulose Nanofiber
Ogura, K. (2015) · NIPPON GOMU KYOKAISHI · doi:10.2324/gomu.88.433 · Cited by 1
Ernest-Saunders, R. (2011) · NCSU Libraries Repository (North Carolina State University Libraries) · Cited by 1
Wet Atomizing Technology of Carbon Nanotube & Cellulose Nanofiber
Ogura, K. (2016) · International Polymer Science and Technology · doi:10.1177/0307174x1604300702 · Cited by 1
Effect of mechanical treatment of sugar cane bagasse on properties of poly(ethylene oxide)
Motaung, T. E., Mokhena, T. C., MOTLOUNG, S. V., Linganiso, E. C., & Linganiso, L. Z. (2019) · International Journal of Plastics Technology · doi:10.1007/s12588-019-09234-7 · Cited by 1
Priprava i karakterizacija poli(metil-metakrilatnih) kompozita s nanocelulozom
Mrkalj, K., Faraguna, F., Vidović, E., & Jukić, A. (2021) · Kemija u industriji · doi:10.15255/kui.2021.051 · Cited by 1
Potential of Nanocellulose Prepared from Agricultural By-products for Food Use
Kumagai, A., Saito, Y., & Endo, T. (2021) · Oleoscience · doi:10.5650/oleoscience.21.455 · Cited by 1
Indrianingsih, A. W., Rosyida, V. T., Suryani, R., Suntini, Asari, S. M., & Pratiwi, S. I. (2023) · AIP conference proceedings · doi:10.1063/5.0118358 · Cited by 1
Experimental and numerical characterization of scalable cellulose nano-fiber composite
Barari, B. (2016) · UWM Digital Commons (University of Wisconsin–Milwaukee) · Cited by 1
Kim, J.-D., Lee, T.-J., Lee, J.-H., Ryu, J.-Y., & Won, J. M. (2018) · Nordic Pulp & Paper Research Journal · doi:10.1515/npprj-2018-3049 · Cited by 1
“The major effects of beating on fibers are changes to fiber structure such as internal or external fibrillation, fiber shortening, fiber straightening and fines generation (Kang and Paulapuro 2006, Nakagaito and Yano 2004, Li et al. 2011).”
BackgroundReview on the Preparation of Cellulose Nanofibers
Abe, K. (2019) · Journal of The Adhesion Society of Japan · doi:10.11618/adhesion.55.296 · Cited by 1
DESEMPENHO TECNOLÓGICO DE PAPÉIS PRODUZIDOS COM ADIÇÃO DE NANOFIBRILAS DE CELULOSE DE Eucalyptus
da Silva, F. S., Schulz, H. R., Acosta, A. P., & Cardoso, G. V. (2020) · BIOFIX Scientific Journal · doi:10.5380/biofix.v5i2.69489 · Cited by 1
STRUCTURE OF CELLULOSE AND ITS USE; A REVIEW
Nisa’, L. L. A., Aritonang, S., Manawan, M. T. E., & Sudiro, T. (2022) · International Journal of Education and Social Science Research · doi:10.37500/ijessr.2022.5205 · Cited by 1
Proizvodnja nanoceluloze iz lignoceluloznih sirovina
Rezić, T., Drdić, M., Radić, I., & Presečki, A. V. (2022) · Hrvatski časopis za prehrambenu tehnologiju biotehnologiju i nutricionizam · doi:10.31895/hcptbn.17.1-2.8 · Cited by 1
Production of Nanomaterials from Forest Resources
Rahman, M. M. (2023) · Materials research foundations · doi:10.21741/9781644902554-7 · Cited by 1
Cellulose and Its Derivatives as Bio-Based Additives for Sustainable Thermoplastic Applications
Girişken, Ç., Ariturk, G. S., & Menceloǵlu, Y. Z. (2024) · Elsevier eBooks · doi:10.1016/b978-0-323-95486-0.00062-4 · Cited by 1
Sustainable Approaches for Food Waste
Uzun, H. İ. (2025) · Environmental science and engineering · doi:10.1007/978-3-031-89230-1_9 · Cited by 1
DEVELOPMENT OF SOY-BASED BIODEGRADABLE FIBERS AND RESINS FOR SOIL STABILIZATION AND CROP PROTECTION
Lingamoorthy, S. K. (2010) · eCommons (Cornell University) · Cited by 1
Metadata
- Authors
- Nakagaito, A. N., & Yano, H.
- Affiliations
- Kyoto University (JP)
- Corresponding author
- Yano, H.
- Venue
- Applied Physics A: Materials Science & Processing
- Published
- 2004-03-01
- Volume
- 78
- Issue
- 4
- Pages
- 547-552
- ISSN
- 0947-8396 (ISSN-L)
- 1432-0630
- OpenAlex
- W2035264658
- Cited by
- 608
- References
- 2
- Citations by year
- 2026: 9 · 2025: 14 · 2024: 22 · 2023: 23 · 2022: 37 · 2021: 43 · 2020: 42 · 2019: 35 · 2018: 37 · 2017: 40 · 2016: 33 · 2015: 43 · 2014: 35 · 2013: 37 · 2012: 29
- FWCI
- 8.59
- Type
- journal article
- Language
- en
- Open access
- Licence
- cc-by-nc-nd
- www.springer.com/tdm (tdm)
- Locations
- Applied Physics A (publishedVersion)
- Institutional Repositories DataBase (IRDB) (submittedVersion, cc-by-nc-nd)
- Topics
- Physical Sciences › Materials Science › Polymers and Plastics › Natural Fiber Reinforced Composites
- Physical Sciences › Materials Science › Biomaterials › Advanced Cellulose Research Studies
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Material Properties and Processing
- Keywords
- kraft pulp, natural fiber composites, phenolic resin, high-pressure homogenization, pulp refining, mechanical properties, flexural strength, water retention, surface area, cellulose nanocomposites
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.