The effect of morphological changes from pulp fiber towards nano-scale fibrillated cellulose on the mechanical properties of high-strength plant fiber based composites
Open accessThe DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
Fibrillated kraft pulp impregnated with phenolic resin was compressed under an extremely high pressure of 100 MPa to produce high strength cellulose nanocomposites. To evaluate how the degree of fibrillation of pulp fiber affects the mechanical properties of the final composites, kraft pulp subjected to various levels of refining and high pressure homogenization treatments was used as raw material with different phenolic resin contents. It was found that fibrillation solely of the surface of the fibers is not effective in improving composite strength, though there is a distinct point in the fibrillation stage at which an abrupt increase in the mechanical properties of composites occurs. In the range between 16 and 30 passes through refiner treatments, pulp fibers underwent a degree of fibrillation that resulted in a stepwise increment of mechanical properties, most strikingly in bending strength. This increase was attributed to the complete fibrillation of the bulk of the fibers. For additional high pressure homogenization-treated pulps, composite strength increased linearly against water retention values, which characterize the cellulose’s exposed surface area, and reached maximum value at 14 passes through the homogenizer.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“They observed that the disintegration could be improved by increasing the number of passes to 30 times.”
From Cellulosic Bionanocomposites: A Review of Preparation, Properties and Applications (2010) · cites this paper as [83]
Citations
Cites
Some microrheological aspects of wood-pulp fibres subjected to fatigue loading
Hamad, W. Y. (1997) · Cellulose · doi:10.1023/a:1018463117874 · Cited by 29
Modeling of the particle breakage kinetics in the wet mills for the paper industry
Roux, J., & Mayade, T. L. (1999) · Powder Technology · doi:10.1016/s0032-5910(99)00143-6 · Cited by 22
Cited by
Items 301–400 of 702
Potential for using multiscale Posidonia oceanica waste
Khiari, R., & Belgacem, M. N. (2017) · Elsevier eBooks · doi:10.1016/b978-0-08-100959-8.00021-4 · Cited by 34
Nanocellulose in pigment coatings : Aspects of barrier properties and printability in offset
Nygårds, S. (2011) · KTH Publication Database DiVA (KTH Royal Institute of Technology) · Cited by 34
Nadeem, H., Nimmegeers, P., Batchelor, W. J., & Billen, P. (2024) · Food and Bioproducts Processing · doi:10.1016/j.fbp.2024.03.005 · Cited by 34
Medina, L., Ansari, F., Carosio, F., Salajková, M., & Berglund, L. A. (2019) · ACS Applied Nano Materials · doi:10.1021/acsanm.9b00459 · Cited by 33
Banvillet, G., Grange, C., Curtil, D., Putaux, J., Déprès, G., Belgacem, M. N., & Bras, J. (2023) · Cellulose · doi:10.1007/s10570-022-05016-4 · Cited by 33
“For instance, homogenization and microfluidization have been used after an ultra-fine grinding process (Nakagaito and Yano 2004; Qing et al. 2013).”
MethodProduction of Cellulose Nanofibrils and Their Application to Food: A Review
Lee, H., Sundaram, J., & Mani, S. (2017) · Springer eBooks · doi:10.1007/978-981-10-4678-0_1 · Cited by 34
Tazwar, H. T., Antora, M. F., & Rahman, M. Z. (2025) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2025.07.237 · Cited by 32
Cellulose and its Derivatives: Properties and Applications
Delucis, R. D. Á., de Cademartori, P. H. G., Fajardo, A. R., & Amico, S. C. (2021) · Wiley eBooks · doi:10.1002/9781119711414.ch11 · Cited by 32
Nadeem, H., Dehghani, M., Garnier, G., & Batchelor, W. J. (2022) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2022.130890 · Cited by 32
Hamimed, S., Abdeljelil, N., Landoulsi, A., Chatti, A., Aljabali, A. A. A., & Barhoum, A. (2022) · Springer eBooks · doi:10.1007/978-3-030-62976-2_15-1 · Cited by 31
Nanocellulose as a carrier for improved drug delivery: Progresses and innovation
Das, M., Lalsangi, S. B., Santra, S., & Banerjee, R. (2024) · Journal of Drug Delivery Science and Technology · doi:10.1016/j.jddst.2024.105743 · Cited by 31
Joseleau, J. P., Chevalier-Billosta, V., & Ruel, K. (2012) · Cellulose · doi:10.1007/s10570-012-9693-5 · Cited by 31
“More generally, MFCs prepared from mechanical disintegration of fibers have found important industrial applications such as reinforcement in biodegradable nanocomposites with high commercial potential (Nakagaito and Yano 2004; Hubbe et al. 2008; Siró and Plackett 2010).”
BackgroundBio‐based Nanomaterials and Their Bionanocomposites
Bagal-Kestwal, D., Kestwal, R. M., & Chiang, B. (2016) · Wiley eBooks · doi:10.1002/9783527683772.ch8 · Cited by 30
Asrofi, M., Abral, H., Kasim, A., & Pratoto, A. (2017) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/204/1/012018 · Cited by 30
Cellulose Based Biomaterials: Benefits and Challenges
Sharif, F., Muhammad, N., & Zafar, T. (2020) · Springer eBooks · doi:10.1007/978-3-030-40301-0_11 · Cited by 30
Huang, X., & Netravali, A. N. (2008) · Journal of Macromolecular Science Part A · doi:10.1080/10601320802378426 · Cited by 29
Prevention of Aggregation of Pectin‐Containing Cellulose Nanofibers Prepared from Mandarin Peel
Hiasa, S., Kumagai, A., Endo, T., & Edashige, Y. (2016) · Journal of Fiber Science and Technology · doi:10.2115/fiberst.2016-0006 · Cited by 29
Fabrication of composites reinforced with lignocellulosic materials from agricultural biomass
Haque, A., Mondal, D., Khan, I., Usmani, M. A., Bhat, A. H., & Gazal, U. (2017) · Elsevier eBooks · doi:10.1016/b978-0-08-100959-8.00010-x · Cited by 29
Winter, A., Gindl‐Altmutter, W., Mandlez, D., Bauer, W., Eckhart, R., Leitner, J. J., & Veigel, S. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.125258 · Cited by 29
Enhancement of nanofibrillation of softwood cellulosic fibers by oxidation and sulfonation
Pan, S., & Ragauskas, A. J. (2014) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2014.04.096 · Cited by 29
“One of the most prevalent mechanic methods 60 to acquire MFC is a homogenizing process in which a low consistency wood pulp fiber 61 suspension is processed through a high pressure mechanical homogenizer that facilitates the 62 microfibrillation of pulp fibers (Nakagaito & Yano, 2004).”
MethodZhang, L., Guo, L., & Wei, G. (2021) · Materials · doi:10.3390/ma14185390 · Cited by 28
“In addition, mechanical methods, such as high-pressure homogenization and refining, were typical techniques for creating nanoscale and microscale CNFs, by which CNFs with adjusting size and morphology, as well as enhanced bonding potential, could be produced [54,55].”
MethodNanocellulose Coating on Kraft Paper
Lengowski, E. C., Júnior, E. A. B., Simon, L. C., de Muñiz, G. I. B., de Andrade, A. S., Leite, A. N., & Leite, E. L. S. D. M. (2023) · Coatings · doi:10.3390/coatings13101705 · Cited by 28
Liu, Y., Xu, X., Gao, M., Guo, Y., Xu, T., Jiang, H., Zhang, Z., Ji, X., & Si, C. (2024) · Industrial Crops and Products · doi:10.1016/j.indcrop.2024.118326 · Cited by 28
Chun, S., Lee, S.-Y., Jeong, G.-Y., & Kim, J. H. (2012) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2012.01.001 · Cited by 28
Ultrasound-assisted conversion of cellulose into hydrogel and functional carbon material
Ching, T. W., Haritos, V. S., & Tanksale, A. (2018) · Cellulose · doi:10.1007/s10570-018-1746-y · Cited by 28
“While high pressure homogenisation is one of the most commonly used methods to obtain nanocellulose, (Chakraborty et al. 2005; Nakagaito and Yano 2004) it requires high pressures in the range of 20,000 psi (* 1400 bars) and multiple passes (20–50) to produce homogenised nanocellulose (Lee et al.…”
MethodKarlsson, R.-M. P., Larsson, P. T., Yu, S., Pendergraph, S. A., Pettersson, T., Hellwig, J., & Wågberg, L. (2018) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2018.02.052 · Cited by 27
Villada, Y., Iglesias, M. C., Casís, N., Erdmann, E., Peresin, M. S., & Estenoz, D. A. (2018) · Cellulose · doi:10.1007/s10570-018-2081-z · Cited by 27
Functional Polymer Nanocomposite Materials from Microfibrillated Cellulose
Tingaut, P., Eyholzer, C., & Zimmerm, T. (2011) · InTech eBooks · doi:10.5772/20817 · Cited by 27
“…increase in mechanical properties such as bending and tensile strength,(Iwatake, Nogi & Yano, 2008; Nakagaito, Fujimura, Sakai, Hama & Yano, 2009; Nakagaito & Yano, 2004; Suryanegara, Nakagaito & Yano, 2009; Zimmermann, Pöhler & Geiger, 2004) Young’s modulus,(Iwatake, Nogi & Yano, 2008;…”
MethodHrabalova, M., Schwanninger, M., Wimmer, R., Gregorová, A., Zimmermann, T., & Mundigler, N. (2011) · BioResources · doi:10.15376/biores.6.2.1631-1647 · Cited by 26
Nanocellulose Alignment and Electrical Properties Improvement
Kadimi, A., Hamou, K. B., Habibi, Y., Ounaies, Z., & Kaddami, H. (2016) · Elsevier eBooks · doi:10.1016/b978-0-323-44248-0.00011-0 · Cited by 26
Development of hydrophobic thermoplastic starch composites
Fazeli, M. (2018) · Americanae (AECID Library) · Cited by 26
Li, Y., Wang, J., Li, H., Huang, L., Chen, L., Ni, Y., & Zheng, Q. (2021) · Applied Surface Science · doi:10.1016/j.apsusc.2021.151502 · Cited by 25
Measuring elasticity of wet cellulose beads with an AFM colloidal probe using a linearized DMT model
Hellwig, J., Karlsson, R.-M. P., Wågberg, L., & Pettersson, T. (2017) · Analytical Methods · doi:10.1039/c7ay01219e · Cited by 25
Zhao, Y., Lei, H., Liu, Y., Ruan, R. R., Qian, M., Huo, E., Zhang, Q., Huang, Z., Lin, X., Wang, C., et al. (2020) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2020.138751 · Cited by 25
Cellulose Nanocomposites for High-Performance Applications
Cherian, B. M., Leão, A. L., de Souza, S. F., Thomas, S., Pothan, L. A., & Kottaisamy, M. (2011) · Springer eBooks · doi:10.1007/978-3-642-17370-7_21 · Cited by 25
Natural rubber (NR) composites using cellulosic fiber reinforcements
Nunes, R. C. R. (2014) · Elsevier eBooks · doi:10.1533/9780857096913.2.284 · Cited by 24
Nanofibrillated cellulose reinforcement in thermoset polymer composites
Khalil, H. P. S. A., Saurabh, C. K., Asniza, M., Tye, Y. Y., Fazita, M. R. N., Syakir, M., Fizree, H. M., Yusra, A. F. I., Kassim, M. H. M., Kassim, M. A., et al. (2017) · Elsevier eBooks · doi:10.1016/b978-0-08-100957-4.00001-2 · Cited by 28
Tanaka, R., Kashiwagi, Y., Okada, Y., & Inoue, T. (2019) · Biomacromolecules · doi:10.1021/acs.biomac.9b00943 · Cited by 24
Nanocellulose and nanoclay as reinforcement materials in polymer composites: A review
Hussin, F. N. N. M., Wahab, R. A., & Attan, N. (2020) · Malaysian Journal of Fundamental and Applied Sciences · doi:10.11113/mjfas.v16n2.1430 · Cited by 24
“[28] Yano, H. Production of cellulose nanofibers and their applications.”
MethodInfluentialEnzymes as nanoadditives: a promising alternative for biofuel production
Punia, H., Tokas, J., Malik, A., & Kumar, N. (2021) · Elsevier eBooks · doi:10.1016/b978-0-12-822401-4.00019-2 · Cited by 24
Dimić‐Mišić, K., Rantanen, J., Maloney, T. C., & Gane, P. A. C. (2016) · Journal of Applied Polymer Science · doi:10.1002/app.43486 · Cited by 23
Nanocellulose: a promising nanomaterial for fabricating fluorescent composites
Zhai, S., Chen, H., Zhang, Y., Li, P., & Wu, W. (2022) · Cellulose · doi:10.1007/s10570-022-04700-9 · Cited by 23
“2010), highpressure homogenizer (Nakagaito and Yano 2004; Naderi et al. 2015), cryo-crushing (Chakraborty et al.”
BackgroundTowards standardization of laboratory preparation procedure for uniform cellulose nanopapers
Parit, M., Aksoy, B., & Jiang, Z. (2018) · Cellulose · doi:10.1007/s10570-018-1759-6 · Cited by 23
“properties such as low coefficient of thermal expansion (CTE) and moisture adsorption; higher thermal stability, surface smoothness, barrier properties, and optical transparency (Baez et al. 2014; Berglund and Peijs 2010; Kumar et al. 2014; Nakagaito and Yano 2004; Nogi et al. 2009, 2013; Sehaqui et al. 2010; Zhang et…”
BackgroundMethodHigh-Modulus Oriented Cellulose Nanopaper
Gindl‐Altmutter, W., Veigel, S., Obersriebnig, M., Tippelreither, C., & Kečkéš, J. (2012) · ACS symposium series · doi:10.1021/bk-2012-1107.ch001 · Cited by 23
Iglesias, M. C., Gomez‐Maldonado, D., Davis, V. A., & Peresin, M. S. (2022) · Journal of Materials Science · doi:10.1007/s10853-022-07992-1 · Cited by 22
“J Appl Polym Sci Appl Polym Symp 37:797–813 [91] Nakagaito AN, Yano H (2004) The effect of morphological”
BackgroundTensile Properties of Wood Cellulose Nanopaper and Nanocomposite Films
Ansari, F., & Berglund, L. A. (2016) · Elsevier eBooks · doi:10.1016/b978-0-323-44248-0.00004-3 · Cited by 22
Khattab, M. M., Hady, N. A. A., & Dahman, Y. (2017) · Elsevier eBooks · doi:10.1016/b978-0-08-100957-4.00021-8 · Cited by 24
Lignocellulosic nanomaterials for construction and building applications
Lum, W. C., Lee, S. H., Ahmad, Z., Halip, J. A., & Chin, K. L. (2019) · Elsevier eBooks · doi:10.1016/b978-0-12-815749-7.00015-3 · Cited by 22
Enhanced Barrier Performance of Engineered Paper by Atomic Layer Deposited Al2O3 Thin Films
Mirvakili, M. N., Bui, H. V., van Ommen, J. R., Hatzikiriakos, S. G., & Englezos, P. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b02292 · Cited by 22
Nanocelluloses from phormium (Phormium tenax) fibers
Giorgio, L. D., Salgado, P. R., Dufresne, A., & Mauri, A. N. (2020) · Cellulose · doi:10.1007/s10570-020-03120-x · Cited by 22
Transparent composite films prepared from chemically modified cellulose fibers
Sim, G., Liu, Y., & van de Ven, T. G. M. (2016) · Cellulose · doi:10.1007/s10570-016-0923-0 · Cited by 21
“also known that fibers with higher water retention value (WRV) make stronger and tougher films as WRV is related to the exposed surface area (Klemm et al. 2011; Nakagaito and Yano 2004).”
BackgroundBacterial NanoCellulose as Reinforcement for Polymer Matrices
Lee, K., & Bismarck, A. (2016) · Elsevier eBooks · doi:10.1016/b978-0-444-63458-0.00006-8 · Cited by 21
Song, J., Kim, H., Lee, S. H., Lee, O., Kim, H. J., Jeong, Y., Chae, H. G., Koo, J., Yu, S., & Eom, Y. (2023) · Chemical Engineering Journal · doi:10.1016/j.cej.2023.146394 · Cited by 20
Characterization of vegetable fibers and their application in cementitious composites
Correia, V. D. C., dos Santos, S. F., Tonoli, G. H. D., & Savastano, H. (2020) · Elsevier eBooks · doi:10.1016/b978-0-08-102704-2.00007-x · Cited by 20
Cellulose‐Nanofiber‐Based Materials
Nakagaito, A. N., & Yano, H. (2014) · Wiley eBooks · doi:10.1002/9783527649440.ch1 · Cited by 20
Self-citationFluting medium strengthened by periodate–chlorite oxidized nanofibrillated celluloses
Hietala, M., Ämmälä, A. Ä., Silvennoinen, J., & Liimatainen, H. (2015) · Cellulose · doi:10.1007/s10570-015-0801-1 · Cited by 20
Chinga‐Carrasco, G., Lenes, M., Johnsen, P. O., & Hult, E.-L. (2009) · Micron · doi:10.1016/j.micron.2009.04.010 · Cited by 20
Properties and interfacial behaviour of cellulose nanofibrils
Ahola, S. (2008) · Aaltodoc (Aalto University) · Cited by 20
Efficient preparation of holocellulose nanofibers and their reinforcement potential
Ding, Q., Rao, J., Lv, Z., Gong, X., Lü, B., Guan, Y., Ren, J., & Peng, F. (2022) · Cellulose · doi:10.1007/s10570-022-04765-6 · Cited by 19
“To overcome these drawbacks and realize efficient preparation of nanocellulose in high yield, mechanical treatments, including high pressure homogenization (Nakagaito and Yano 2004), micro-fluidization (Ferrer et al.”
BackgroundCellulose fibrillation and interaction with psyllium seed husk heteroxylan
Ren, Y., Linter, B. R., & Foster, T. J. (2020) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2020.105725 · Cited by 19
Oxidative enzyme activation of cellulose substrates for surface modification
Solhi, L., Li, J., Li, J., Heyns, N. M. I., & Brumer, H. (2022) · Green Chemistry · doi:10.1039/d2gc00393g · Cited by 19
Isa, A., Toyoda, T., Suzuki, S., Kojima, Y., Ito, H., Makise, R., & Okamoto, M. (2013) · Journal of Wood Chemistry and Technology · doi:10.1080/02773813.2013.817431 · Cited by 19
Ernest-Saunders, R., Pawlak, J. J., & Lee, J. M. (2014) · Cellulose · doi:10.1007/s10570-014-0177-7 · Cited by 19
“In the past decade, studies are now revealing that MFC can be used as the reinforcing agent or the matrix for advanced composite materials (Nakagaito and Yano 2004, 2005; Fukuzumi et al. 2008; Henriksson et al. 2008; Iwamoto et al. 2005, 2008; Andresen et al. 2006, 2007, Stenstad et al. 2008).”
BackgroundLengowski, E. C., Magalhães, W. L. E., Nisgoski, S., de Muñiz, G. I. B., Satyanarayana, K. G., & Lazzarotto, M. (2016) · Thermochimica Acta · doi:10.1016/j.tca.2016.06.010 · Cited by 19
Rudie, A. W. (2017) · Wiley eBooks · doi:10.1002/9783527689972.ch23 · Cited by 19
Li, J., Song, T., Xiu, H., Zhang, M., Cheng, R., Liu, Q., Zhang, X., Kozliak, E. I., & Ji, Y. (2018) · Industrial Crops and Products · doi:10.1016/j.indcrop.2018.09.016 · Cited by 19
Cellulose nanoparticles as reinforcement in polymer nanocomposites
Ramires, E. C., & Dufresne, A. (2012) · Elsevier eBooks · doi:10.1533/9780857096241.1.131 · Cited by 19
Efficient preparation of carbon papers by pyrolysis of iodine-treated Japanese paper
Kyotani, M., Matsushita, S., Kimura, S., & Akagi, K. (2011) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2011.12.017 · Cited by 19
Produção, caracterização e aplicação de nanofibras de celulose
Nunes, T. F. G. (2014) · Portuguese National Funding Agency for Science, Research and Technology (RCAAP Project by FCT) · Cited by 19
Jiao, T., Liang, F., Fang, G., Jiao, J., Huang, C., Tian, Q., Zhu, B., Deng, Y., Han, S., & Zhou, X. (2024) · Industrial Crops and Products · doi:10.1016/j.indcrop.2024.118169 · Cited by 18
Bulota, M., Jääskeläinen, A., Paltakari, J., & Hughes, M. (2011) · Journal of Materials Science · doi:10.1007/s10853-010-5227-4 · Cited by 18
Singha, A. S., & Rana, A. K. (2012) · Journal of Reinforced Plastics and Composites · doi:10.1177/0731684412442989 · Cited by 18
Reinforcing abilities of microfibers and nanofibrillated cellulose in poly(lactic acid) composites
Tanpichai, S., & Wootthikanokkhan, J. (2016) · Science and Engineering of Composite Materials · doi:10.1515/secm-2016-0113 · Cited by 18
Structure and Properties of Cellulose Nanofibrils
Huang, P., Wang, C., Huang, Y., & Wu, M. (2019) · Wiley eBooks · doi:10.1002/9783527807437.ch3 · Cited by 18
Mahsuli, T., Suryanto, H., Larasati, A., & Muhajir, M. (2019) · AIP conference proceedings · doi:10.1063/1.5115695 · Cited by 18
Employing photoluminescence to rapidly follow aggregation and dispersion of cellulose nanofibrils
Johns, M. A., Lewandowska, A. E., Green, E., & Eichhorn, S. J. (2020) · The Analyst · doi:10.1039/d0an00868k · Cited by 18
Zhang, S., Zhou, Y., Zhu, G., Jiang, Y., Xie, J., Qi, J., Yang, H., Hui, W., & Huang, J. (2021) · Cellulose · doi:10.1007/s10570-021-03802-0 · Cited by 18
“One of the main applications of nanocellulose is the preparation of transparent films, which are widely used as matrix for electronic equipment (Nyholm et al. 2011).”
BackgroundAnimal fiber–based green composites
Gogoi, G., Mandal, M., & Maji, T. K. (2023) · Elsevier eBooks · doi:10.1016/b978-0-323-95183-8.00015-9 · Cited by 17
Mavlan, M., Chang, T., Feng, R., Wilkinson, J. R., Nicholas, R. J., Idahagbon, N. B., Youngblood, J. P., & Wei, A. (2023) · Cellulose · doi:10.1007/s10570-023-05435-x · Cited by 17
“Microfibrillated cellulose derived from woody sources are generally polydisperse with diameters ranging from 15 nm to several microns, whose distributions that depend strongly on the refinement methods used (Nakagaito and Yano 2004; Abe et al. 2007; Pääkkö et al. 2007).”
MethodNadeem, H., Naseri, M., Shanmugam, K., Browne, C., Garnier, G., & Batchelor, W. J. (2020) · Cellulose · doi:10.1007/s10570-020-03473-3 · Cited by 17
Jacquet, N., Vanderghem, C., Danthine, S., Blecker, C. S., & Paquot, M. (2013) · Applied Biochemistry and Biotechnology · doi:10.1007/s12010-012-0057-2 · Cited by 17
Mechanical performance of cellulose nanofibril film-wood flake laminate
Liu, J.-C., Moon, R. J., Rudie, A. W., & Youngblood, J. P. (2013) · Holzforschung · doi:10.1515/hf-2013-0071 · Cited by 17
“Several authors stacked cellulose microfibrils (CMF), (Nakagaito and Yano 2004, 2008), bacterial cellulose (Nakagaito et al.”
BackgroundMeasuring elasticity of wet cellulose fibres with AFM using indentation and a linearized Hertz model
Hellwig, J., Durán, V. L., & Pettersson, T. (2018) · Analytical Methods · doi:10.1039/c8ay00816g · Cited by 17
Johns, M. A., Lewandowska, A. E., & Eichhorn, S. J. (2019) · Microscopy and Microanalysis · doi:10.1017/s1431927619000527 · Cited by 17
“…interest in the use of cellulosic nanomaterials (CNMs) across a wide range of application areas including, but not exclusive to, composites (Nakagaito & Yano, 2004; Malainine et al., 2005), biosensors (Bi et al., 2016), drug delivery (Jackson et al., 2011), food additives (Hu et al.,…”
BackgroundNanofibrillated Cellulose Based Bio-phenolic Composites
Fareez, I. M., Jasni, A. H., & Norrrahim, M. N. F. (2020) · Springer eBooks · doi:10.1007/978-981-15-8932-4_9 · Cited by 17
Nanofibrillar cellulose in drug delivery
Kolakovic, R. (2013) · Helda - University of Helsinki Institutional Repository · Cited by 17
Zheng, H. (2014) · Aaltodoc (Aalto University) · Cited by 17
Pinto, D. G., Rodrigues, J., & Bernardo, L. F. A. (2020) · Applied Sciences · doi:10.3390/app10093023 · Cited by 16
Li, Y., Zhang, H., Xiao, Z., & Wang, R. (2019) · Frontiers in Chemistry · doi:10.3389/fchem.2019.00555 · Cited by 16
“In the LLOs/CNTs/NFCs electrode, NFCs with extraordinary mechanical properties is beneficial to bind active electrode particles and form a flexible freestanding electrode (Nakagaito and Yano, 2004; Aulin et al., 2012).”
BackgroundSaleh, R. I., Kim, M., & Cha, C. (2021) · Coatings · doi:10.3390/coatings11111384 · Cited by 16
“Wood pulp mostly contains lignocellulosic fibers that naturally possess high mechanical strength [17].”
BackgroundYang, F., Li, J., Zhang, W., He, J., Yang, R., Huang, J., Zhang, X., & Zhang, W. (2023) · Polymers for Advanced Technologies · doi:10.1002/pat.6039 · Cited by 16
Effect of nanofibers on the structure and properties of biocomposites
Abdulkhani, A., Zadeh, Z. E., & Allahdadi, M. (2020) · Elsevier eBooks · doi:10.1016/b978-0-12-819904-6.00015-3 · Cited by 16
Progress in Nanocellulose Preparation and Application
Mao, H., Gong, Y., Liu, Y., Wang, S., Du, L., & Wei, C. Y. (2017) · Paper and Biomaterials · doi:10.26599/pbm.2017.9260028 · Cited by 16
Cellulose Nanofiber for Eco-friendly Polymer Nanocomposites
Muhamad, I. I., Salehudin, M. H., & Salleh, E. (2015) · Advanced structured materials · doi:10.1007/978-81-322-2470-9_11 · Cited by 16
A Novel Nano Cellulose Preparation Method and Size Fraction by Cross Flow Ultra- Filtration
Zhu, H., Helander, M., Moser, C., Ståhlkranz, A., Söderberg, D., Henriksson, G., & Lindström, M. E. (2012) · Current Organic Chemistry · doi:10.2174/138527212802651197 · Cited by 16
“By refining kraft pulp to different degrees before homogenization, Nakagaito and Yano [12] showed that MFC with different properties are created.”
BackgroundInjection Molded of Bio-Micro-Composites from Natural Fibers and Polylactic Acid
Subyakto, S., Hermiati, E., Masruchin, N., Ismadi, I., Prasetiyo, K. W., Kusumaningrum, W. B., & Subiyanto, B. (2017) · Wood Research Journal · doi:10.51850/wrj.2011.2.1.21-26 · Cited by 16
Cellulose nanofibers for the production of bionanocomposites
Nechyporchuk, O. (2015) · theses.fr (ABES) · doi:10.70675/231cbf04z21a4z4e71z9e67z630faacd27da · Cited by 16
Plant Derived Polymers, Properties, Modification & Applications
Bhatia, S. (2016) · Springer eBooks · doi:10.1007/978-3-319-41129-3_4 · Cited by 15
Sheykhnazari, S., Tabarsa, T., Mashkour, M., Khazaeian, A., & Ghanbari, A. (2018) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2018.09.047 · Cited by 15
Nanocelluloses: Emerging Building Blocks for Renewable Materials
Habibi, Y., & Lucia, L. A. (2012) · Wiley eBooks · doi:10.1002/9781118229484.ch3 · Cited by 15
Metadata
- Authors
- Nakagaito, A. N., & Yano, H.
- Affiliations
- Kyoto University (JP)
- Corresponding author
- Yano, H.
- Venue
- Applied Physics A: Materials Science & Processing
- Published
- 2004-03-01
- Volume
- 78
- Issue
- 4
- Pages
- 547-552
- ISSN
- 0947-8396 (ISSN-L)
- 1432-0630
- OpenAlex
- W2035264658
- Cited by
- 608
- References
- 2
- Citations by year
- 2026: 9 · 2025: 14 · 2024: 22 · 2023: 23 · 2022: 37 · 2021: 43 · 2020: 42 · 2019: 35 · 2018: 37 · 2017: 40 · 2016: 33 · 2015: 43 · 2014: 35 · 2013: 37 · 2012: 29
- FWCI
- 8.59
- Type
- journal article
- Language
- en
- Open access
- Licence
- cc-by-nc-nd
- www.springer.com/tdm (tdm)
- Locations
- Applied Physics A (publishedVersion)
- Institutional Repositories DataBase (IRDB) (submittedVersion, cc-by-nc-nd)
- Topics
- Physical Sciences › Materials Science › Polymers and Plastics › Natural Fiber Reinforced Composites
- Physical Sciences › Materials Science › Biomaterials › Advanced Cellulose Research Studies
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Material Properties and Processing
- Keywords
- kraft pulp, natural fiber composites, phenolic resin, high-pressure homogenization, pulp refining, mechanical properties, flexural strength, water retention, surface area, cellulose nanocomposites
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.