The effect of morphological changes from pulp fiber towards nano-scale fibrillated cellulose on the mechanical properties of high-strength plant fiber based composites
Open accessThe DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
Fibrillated kraft pulp impregnated with phenolic resin was compressed under an extremely high pressure of 100 MPa to produce high strength cellulose nanocomposites. To evaluate how the degree of fibrillation of pulp fiber affects the mechanical properties of the final composites, kraft pulp subjected to various levels of refining and high pressure homogenization treatments was used as raw material with different phenolic resin contents. It was found that fibrillation solely of the surface of the fibers is not effective in improving composite strength, though there is a distinct point in the fibrillation stage at which an abrupt increase in the mechanical properties of composites occurs. In the range between 16 and 30 passes through refiner treatments, pulp fibers underwent a degree of fibrillation that resulted in a stepwise increment of mechanical properties, most strikingly in bending strength. This increase was attributed to the complete fibrillation of the bulk of the fibers. For additional high pressure homogenization-treated pulps, composite strength increased linearly against water retention values, which characterize the cellulose’s exposed surface area, and reached maximum value at 14 passes through the homogenizer.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“They observed that the disintegration could be improved by increasing the number of passes to 30 times.”
From Cellulosic Bionanocomposites: A Review of Preparation, Properties and Applications (2010) · cites this paper as [83]
Citations
Cites
Some microrheological aspects of wood-pulp fibres subjected to fatigue loading
Hamad, W. Y. (1997) · Cellulose · doi:10.1023/a:1018463117874 · Cited by 29
Modeling of the particle breakage kinetics in the wet mills for the paper industry
Roux, J., & Mayade, T. L. (1999) · Powder Technology · doi:10.1016/s0032-5910(99)00143-6 · Cited by 22
Cited by
Cellulose nanomaterials review: structure, properties and nanocomposites
Moon, R. J., Martini, A., Nairn, J., Simonsen, J., & Youngblood, J. (2011) · Chemical Society Reviews · doi:10.1039/c0cs00108b · Cited by 6,756
Nanocelluloses: A New Family of Nature‐Based Materials
Klemm, D., Kramer, F., Moritz, S., Lindström, T., Ankerfors, M., Gray, D., & Dorris, A. (2011) · Angewandte Chemie International Edition · doi:10.1002/anie.201001273 · Cited by 4,465
Microfibrillated cellulose and new nanocomposite materials: a review
Siró, I., & Plackett, D. (2010) · Cellulose · doi:10.1007/s10570-010-9405-y · Cited by 2,883
“This mechanical treatment brings about irreversible changes in the fibers, increasing their bonding potential by modification of their morphology and size (Nakagaito and Yano 2004).”
BackgroundReview: current international research into cellulose nanofibres and nanocomposites
Eichhorn, S. J., Dufresne, A., Aranguren, M., Marcovich, N. E., Capadona, J. R., Rowan, S. J., Weder, C., Thielemans, W., Roman, M., Renneckar, S., et al. (2010) · Journal of Materials Science · doi:10.1007/s10853-009-3874-0 · Cited by 2,418
Self-citationLavoine, N., Desloges, I., Dufresne, A., & Bras, J. (2012) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2012.05.026 · Cited by 1,791
Nanocellulose, a Versatile Green Platform: From Biosources to Materials and Their Applications
Thomas, B., Raj, M. C., B, A. K., H, R. M., Joy, J., Moores, A., Drisko, G. L., & Sanchez, C. (2018) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00627 · Cited by 1,714
Production of cellulose nanofibrils: A review of recent advances
Nechyporchuk, O., Belgacem, M. N., & Bras, J. (2016) · Industrial Crops and Products · doi:10.1016/j.indcrop.2016.02.016 · Cited by 1,687
Nanocellulose: a new ageless bionanomaterial
Dufresne, A. (2013) · Materials Today · doi:10.1016/j.mattod.2013.06.004 · Cited by 1,685
Green composites from sustainable cellulose nanofibrils: A review
Abdul Khalil, H. P. S., Bhat, A. H., & Ireana Yusra, A. F. (2012) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2011.08.078 · Cited by 1,573
Abdul Khalil, H. P. S., Davoudpour, Y., Islam, M. N., Mustapha, A., Sudesh, K., Dungani, R., & Jawaid, M. (2014) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2013.08.069 · Cited by 1,333
“This mechanical process can ause irreversible alterations in cellulosic fibers and also increases heir bonding potentials (Nakagaito & Yano, 2004).”
BackgroundMethodCellulosic Bionanocomposites: A Review of Preparation, Properties and Applications
Siqueira, G., Bras, J., & Dufresne, A. (2010) · Polymers · doi:10.3390/polym2040728 · Cited by 1,328
“[83] indirectly evaluated the degree of fibrillation of kraft pulp by water retention, measured as moisture content after centrifuging a 2 wt% fiber suspension of treated pulp slurry at 1,000 G for 15 min.”
BackgroundMethodHenriksson, M., Henriksson, G., Berglund, L. A., & Lindström, T. (2007) · European Polymer Journal · doi:10.1016/j.eurpolymj.2007.05.038 · Cited by 1,183
“When a cellulosic pulp fiber suspension is homogenized, the procedure is often repeated several passes in order to increase the degree of fibrillation [1,4].”
BackgroundMethodChen, W., Yu, H., Liu, Y., Chen, P., Zhang, M., & Hai, Y. (2011) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2010.10.040 · Cited by 971
Cellulosic nanocomposites: a review
(2008) · BioResources · doi:10.15376/biores.3.3.929-980 · Cited by 901
“Such homogenization has been used by many researchers, often in combination with other treatments (Nakagaito and Yano 2004; Bruce et al. 2005; Iwamoto et al. 2005; Ioelovich et al. 2006; Cheng et al. 2007; Leitner et al. 2007; Paakko et al. 2007; Wang et al. 2007a; Zuluguaga et al. 2007; Alemdar…”
MethodObtaining Cellulose Nanofibers with a Uniform Width of 15 nm from Wood
Abe, K., Iwamoto, S., & Yano, H. (2007) · Biomacromolecules · doi:10.1021/bm700624p · Cited by 885
Self-citationJonoobi, M., Harun, J., Mathew, A. P., & Oksman, K. (2010) · Composites Science and Technology · doi:10.1016/j.compscitech.2010.07.005 · Cited by 863
“Cellulose nanofibers (CNFs) and nanowhiskers (CNWs) derived from renewable biomass have attracted much interest as an alternative to micro-sized reinforcements in composite materials [4-26].”
BackgroundMethodJonoobi, M., Oladi, R., Davoudpour, Y., Oksman, K., Dufresne, A., Hamzeh, Y., & Davoodi, R. (2015) · Cellulose · doi:10.1007/s10570-015-0551-0 · Cited by 847
“Nakagaito and Yano (2004) investigated the effect of the degree of fibrillation of pulp fibers on the mechanical properties of cellulose composites with high strength.”
BackgroundOn the use of nanocellulose as reinforcement in polymer matrix composites
Lee, K.-Y., Aitomäki, Y., Berglund, L. A., Oksman, K., & Bismarck, A. (2014) · Composites Science and Technology · doi:10.1016/j.compscitech.2014.08.032 · Cited by 819
Review of the recent developments in cellulose nanocomposite processing
Oksman, K., Aitomäki, Y., Mathew, A. P., Siqueira, G., Zhou, Q., Butylina, S., Tanpichai, S., Zhou, X., & Hooshmand, S. (2016) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2015.10.041 · Cited by 712
Recent advances in surface-modified cellulose nanofibrils
Rol, F., Belgacem, M. N., Gandini, A., & Bras, J. (2019) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2018.09.002 · Cited by 698
Moisture and Oxygen Barrier Properties of Cellulose Nanomaterial-Based Films
Wang, J., Gardner, D. J., Stark, N. M., Bousfield, D. W., Tajvidi, M., & Cai, Z. (2018) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.7b03523 · Cited by 675
Nano-fibrillation of pulp fibers for the processing of transparent nanocomposites
Iwamoto, S., Nakagaito, A. N., & Yano, H. (2007) · Applied Physics A · doi:10.1007/s00339-007-4175-6 · Cited by 669
Self-citationBiocomposites from wheat straw nanofibers: morphology, thermal and mechanical properties
Alemdar, A., & Sain, M. (2008) · Composites Science and Technology · doi:10.1016/j.compscitech.2007.05.044 · Cited by 661
Pääkkö, M., Vapaavuori, J., Silvennoinen, R., Kosonen, H., Ankerfors, M., Lindström, T., Berglund, L. A., & Ikkala, O. (2008) · Soft Matter · doi:10.1039/b810371b · Cited by 660
Bacterial cellulose in biomedical applications: A review
Picheth, G. F., Pirich, C. L., Sierakowski, M. R., Woehl, M. A., Sakakibara, C. N., de Souza, C. F., Martin, A. A., da Silva, R., & de Freitas, R. A. (2017) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2017.05.171 · Cited by 624
Cellulose fibrils for polymer reinforcement
Zimmermann, T., Pöhler, E., & Geiger, T. (2004) · Advanced Engineering Materials · doi:10.1002/adem.200400097 · Cited by 598
Spence, K. L., Venditti, R. A., Rojas, O. J., Habibi, Y., & Pawlak, J. J. (2011) · Cellulose · doi:10.1007/s10570-011-9533-z · Cited by 562
“Alternatives for mechanical reduction of fiber size include disk refiners, PFI mills, manual cutting, and Valley beaters, which can be used prior to the production of MFC (Andresen et al. 2006; Henriksson et al. 2008; Herrick et al. 1983; Iwamoto et al. 2005; Nakagaito and Yano 2004; Turbak et al. 1983).”
BackgroundMethodInfluentialChen, W., Yu, H., Liu, Y., Hai, Y., Zhang, M., & Chen, P. (2011) · Cellulose · doi:10.1007/s10570-011-9497-z · Cited by 541
“The extraction methods include mechanical treatments, such as cryocrushing (Chakraborty et al. 2005), grinding (see Abe et al. 2007; Iwamoto et al. 2007; Iwamoto et al. 2008 and references therein), and high-pressure homogenization (see Herrick et al. 1983; Nakagaito and Yano 2004, 2005; Turbak et al. 1983 and referen…”
MethodBiocomposites: technology, environmental credentials and market forces
Fowler, P., Hughes, J. M., & Elias, R. (2006) · Journal of the Science of Food and Agriculture · doi:10.1002/jsfa.2558 · Cited by 532
Adhesion and Surface Issues in Cellulose and Nanocellulose
Gardner, D. J., Oporto, G. S., Mills, R., & Samir, M. A. S. A. (2008) · Journal of Adhesion Science and Technology · doi:10.1163/156856108x295509 · Cited by 525
Properties of nanofibrillated cellulose from different raw materials and its reinforcement potential
Zimmermann, T., Bordeanu, N., & Strub, E. (2010) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2009.10.045 · Cited by 519
Junior de Menezes, A., Siqueira, G., Curvelo, A. A. S., & Dufresne, A. (2009) · Polymer · doi:10.1016/j.polymer.2009.07.038 · Cited by 516
Cellulose nanofiber-reinforced polylactic acid
Iwatake, A., Nogi, M., & Yano, H. (2008) · Composites Science and Technology · doi:10.1016/j.compscitech.2008.03.006 · Cited by 513
Self-citationNanocellulose in Thin Films, Coatings, and Plies for Packaging Applications: A Review
Hubbe, M. A., Ferrer, A., Tyagi, P., Yin, Y., Salas, C., Pal, L., & Rojas, O. J. (2017) · BioResources · doi:10.15376/biores.12.1.2143-2233 · Cited by 508
Rajinipriya, M., Nagalakshmaiah, M., Robert, M., & Elkoun, S. (2018) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.7b03437 · Cited by 505
Nanocelluloses as Innovative Polymers in Research and Application
Klemm, D., Schumann, D., Kramer, F., Heßler, N., Hornung, M., Schmauder, H.-P., & Marsch, S. (2006) · Advances in Polymer Science · doi:10.1007/12_097 · Cited by 491
Novel Nanostructured Paper with Ultrahigh Transparency and Ultrahigh Haze for Solar Cells
Fang, Z., Zhu, H., Yuan, Y., Ha, D., Zhu, S., Preston, C., Chen, Q., Li, Y., Han, X., Lee, S., et al. (2014) · Nano Letters · doi:10.1021/nl404101p · Cited by 489
Biopolymer nanofibrils: Structure, modeling, preparation, and applications
Ling, S., Chen, W., Fan, Y., Zheng, K., Jin, K., Yu, H., Buehler, M. J., & Kaplan, D. L. (2018) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2018.06.004 · Cited by 463
Sehaqui, H., Salajková, M., Zhou, Q., & Berglund, L. A. (2010) · Soft Matter · doi:10.1039/b927505c · Cited by 462
Optically transparent composites reinforced with plant fiber-based nanofibers
Iwamoto, S., Nakagaito, A. N., Yano, H., & Nogi, M. (2005) · Applied Physics A · doi:10.1007/s00339-005-3316-z · Cited by 461
Self-citationWood nanocelluloses: fundamentals and applications as new bio-based nanomaterials
Isogai, A. (2013) · Journal of Wood Science · doi:10.1007/s10086-013-1365-z · Cited by 443
Plant-derived nanostructures: types and applications
Mohammadinejad, R., Karimi, S., Iravani, S., & Varma, R. S. (2016) · Green Chemistry · doi:10.1039/c5gc01403d · Cited by 437
Nanofibrillated cellulose from TEMPO-oxidized eucalyptus fibres: Effect of the carboxyl content
Besbes, I., Alila, S., & Boufi, S. (2011) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2010.12.052 · Cited by 421
Deepa, B., Abraham, E., Cordeiro, N., Mozetic, M., Mathew, A. P., Oksman, K., Faria, M., Thomas, S., & Pothan, L. A. (2015) · Cellulose · doi:10.1007/s10570-015-0554-x · Cited by 420
“Similar result for cellulose nanofibrils obtained by different extraction methods were reported by Sacui et al. (2014), Xu et al.”
BackgroundResultA review of nanocellulose as a new material towards environmental sustainability
Dhali, K., Ghasemlou, M., Daver, F., Cass, P., & Adhikari, B. (2021) · Science of The Total Environment · doi:10.1016/j.scitotenv.2021.145871 · Cited by 417
Nakagaito, A. N., Iwamoto, S., & Yano, H. (2005) · Applied Physics A · doi:10.1007/s00339-004-2932-3 · Cited by 388
Self-citationAbe, K., & Yano, H. (2009) · Cellulose · doi:10.1007/s10570-009-9334-9 · Cited by 380
“In particular, nanofibers, consisting of either single cellulose microfibrils or microfibril aggregates, exhibit high reinforcing efficiency because of their high aspect ratios ( Nakagaito and Yano 2004; Zimmerman et al. 2005; Iwamoto et al. 2005).”
BackgroundSelf-citationChemical surface modifications of microfibrillated cellulose
Stenstad, P., Andresen, M., Tanem, B. S., & Stenius, P. (2008) · Cellulose · doi:10.1007/s10570-007-9143-y · Cited by 374
“Furthermore, much work has been done preparing nanocomposites reinforced with MFC ( Nakagaito and Yano 2004, 2005 ) or with fibrillated cellulosic materials from other sources than wood, including parenchymal microfibrils (Azizi Samir et al. 2004; Malainine et al. 2005; Bruce et al. 2005) and bacterial cellulose (Naka…”
BackgroundStudy of Structural Morphology of Hemp Fiber from the Micro to the Nanoscale
Wang, B., Sain, M., & Oksman, K. (2007) · Applied Composite Materials · doi:10.1007/s10443-006-9032-9 · Cited by 370
“A purely mechanical process can produce refined, fine fibrils several micrometers long and between 20 to 90 nm in diameter [25]; however, this nano-scalar web-like structure of fibrils causes a reduction of strength [5].”
BackgroundInfluentialKaushik, A., & Singh, M. (2011) · Carbohydrate Research · doi:10.1016/j.carres.2010.10.020 · Cited by 367
Basic effects of pulp refining on fiber properties—A review
Gharehkhani, S., Sadeghinezhad, E., Kazi, S. N., Yarmand, H., Badarudin, A., Safaei, M. R., & Zubir, M. N. M. (2015) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2014.08.047 · Cited by 367
Ultra porous nanocellulose aerogels as separation medium for mixtures of oil/water liquids
Cervin, N. T., Aulin, C., Larsson, P. T., & Wågberg, L. (2012) · Cellulose · doi:10.1007/s10570-011-9629-5 · Cited by 363
Cellulose Nanofiber Orientation in Nanopaper and Nanocomposites by Cold Drawing
Sehaqui, H., Ezekiel Mushi, N., Morimune, S., Salajkova, M., Nishino, T., & Berglund, L. A. (2012) · ACS Applied Materials & Interfaces · doi:10.1021/am2016766 · Cited by 351
Preparation of cellulose nanofibers with hydrophobic surface characteristics
Jonoobi, M., Harun, J., Mathew, A. P., Hussein, M. Z. B., & Oksman, K. (2010) · Cellulose · doi:10.1007/s10570-009-9387-9 · Cited by 348
“The isolation of nanocelluloses as well as their use as reinforcement in polymers has been one of the main activities in this research field (Taniguchi and Okamura 1998; Nakagaito and Yano 2004; Zimmermann et al. 2005, Oksman and Sain 2005; Seydibeyog ˘lu and Oksman 2008; Hubbe et al. 2008; Alemdar and Sain 2007; Alem…”
MethodIsolation of nanofibers from soybean source and their reinforcing capability on synthetic polymers
Wang, B., & Sain, M. (2007) · Composites Science and Technology · doi:10.1016/j.compscitech.2006.12.015 · Cited by 344
Stelte, W., & Sanadi, A. R. (2009) · Industrial & Engineering Chemistry Research · doi:10.1021/ie9011672 · Cited by 331
Xie, H., Du, H., Yang, X., & Si, C. (2018) · International Journal of Polymer Science · doi:10.1155/2018/7923068 · Cited by 328
Tingaut, P., Zimmermann, T., & Lopez-Suevos, F. (2010) · Biomacromolecules · doi:10.1021/bm901186u · Cited by 323
Li, W., Yue, J., & Liu, S. (2012) · Ultrasonics Sonochemistry · doi:10.1016/j.ultsonch.2011.11.007 · Cited by 313
“These methods include treatments, such as pulping beating [18,19], high pressure homogenizing [20–22] and cryocrushing [23,24].”
A comparative study of cellulose nanofibrils disintegrated via multiple processing approaches
Qing, Y., Sabo, R., Zhu, J. Y., Agarwal, U., Cai, Z., & Wu, Y. (2013) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2013.04.086 · Cited by 311
Aerogels from nanofibrillated cellulose with tunable oleophobicity
Aulin, C., Netrval, J., Wågberg, L., & Lindström, T. (2010) · Soft Matter · doi:10.1039/c001939a · Cited by 306
Wang, Q. Q., Zhu, J. Y., Gleisner, R., Kuster, T. A., Baxa, U., & McNeil, S. E. (2012) · Cellulose · doi:10.1007/s10570-012-9745-x · Cited by 302
“…but they can also be affected by the degree of fibrillation, feedstock species, etc. Softwood pulps have been extensively used for CNF production (Henriksson et al. 2008; Iwamoto et al. 2007; Nakagaito and Yano 2004; Tejado et al. 2012; Uetani and Yano 2011; Zimmermann et al. 2004).”
BackgroundChakrabarty, A., & Teramoto, Y. (2018) · Polymers · doi:10.3390/polym10050517 · Cited by 302
“A refiner is used for mechanical pretreatment [60].”
MethodRecent advances in nanocellulose processing, functionalization and applications: a review
Thakur, V., Guleria, A., Kumar, S., Sharma, S., & Singh, K. (2021) · Materials Advances · doi:10.1039/d1ma00049g · Cited by 302
Electrospinning Cellulose and Cellulose Derivatives
Frey, M. W. (2008) · Polymer Reviews · doi:10.1080/15583720802022281 · Cited by 296
Rheological Studies of Microfibrillar Cellulose Water Dispersions
Iotti, M., Gregersen, Ø. W., Moe, S., & Lenes, M. (2011) · Journal of Polymers and the Environment · doi:10.1007/s10924-010-0248-2 · Cited by 293
The strength and stiffness of oriented wood and cellulose-fibre materials: A review
Jakob, M., Mahendran, A. R., Gindl-Altmutter, W., Bliem, P., Konnerth, J., Müller, U., & Veigel, S. (2022) · Progress in Materials Science · doi:10.1016/j.pmatsci.2021.100916 · Cited by 292
Novel nanocomposites based on polyurethane and micro fibrillated cellulose
Özgür Seydibeyoğlu, M., & Oksman, K. (2008) · Composites Science and Technology · doi:10.1016/j.compscitech.2007.08.008 · Cited by 290
“Also Nakagaito and Yano [23] used microfibrillated cellulose to increase the mechanical properties of the phenol formaldehyde but they did not perform DMTA analysis to study the thermal stability of the composites.”
BackgroundYi, T., Zhao, H., Mo, Q., Pan, D., Liu, Y., Huang, L., Xu, H., Hu, B., & Song, H. (2020) · Materials · doi:10.3390/ma13225062 · Cited by 287
“The contact angle was as high Materials 2020, 13, 5062 20 of 32 as 120◦, the tensile strength was as high as 120 MPa, the water vapor transmission rate reduced to 101 g/(m2·day) and the light transmittance reached 80%.”
BackgroundInfluentialProcessing of Polymer Nanocomposites Reinforced with Polysaccharide Nanocrystals
Dufresne, A. (2010) · Molecules · doi:10.3390/molecules15064111 · Cited by 283
Nakagaito, A. N., Fujimura, A., Sakai, T., Hama, Y., & Yano, H. (2009) · Composites Science and Technology · doi:10.1016/j.compscitech.2009.03.004 · Cited by 280
Self-citationEnvironmental science and engineering applications of nanocellulose-based nanocomposites
Wei, H., Rodriguez, K., Renneckar, S., & Vikesland, P. J. (2014) · Environ. Sci.: Nano · doi:10.1039/c4en00059e · Cited by 277
Rheological properties of microfibrillar suspension of TEMPO-oxidized pulp
Lasseuguette, E., Roux, D., & Nishiyama, Y. (2008) · Cellulose · doi:10.1007/s10570-007-9184-2 · Cited by 273
“Nakagaito and Yano 2004, 2005 ), due to their morphology and large surface area (Herrick et al. 1983), and high mechanical performances.”
BackgroundNanotechnology and its applications in lignocellulosic composites, a mini review
Kamel, S. (2007) · Express Polymer Letters · doi:10.3144/expresspolymlett.2007.78 · Cited by 271
“[81] studied how the degree of fibrillation of pulp fibers affects the mechanical properties of high strength cellulose composites.”
BackgroundNanofibrillation of Wood Pulp Using a High-Speed Blender
Uetani, K., & Yano, H. (2011) · Biomacromolecules · doi:10.1021/bm101103p · Cited by 258
Self-citationHietala, M., Mathew, A. P., & Oksman, K. (2013) · European Polymer Journal · doi:10.1016/j.eurpolymj.2012.10.016 · Cited by 257
Processing of nanostructured polymers and advanced polymeric based nanocomposites
Peponi, L., Puglia, D., Torre, L., Valentini, L., & Kenny, J. M. (2014) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2014.08.002 · Cited by 257
Brodin, F. W., Gregersen, Ø. W., & Syverud, K. (2014) · Nordic Pulp & Paper Research Journal · doi:10.3183/npprj-2014-29-01-p156-166 · Cited by 256
Cheng, Q., Wang, S., & Rials, T. G. (2009) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2008.11.009 · Cited by 254
Transparent chitosan films reinforced with a high content of nanofibrillated cellulose
Fernandes, S. C. M., Freire, C. S. R., Silvestre, A. J. D., Pascoal Neto, C., Gandini, A., Berglund, L. A., & Salmén, L. (2010) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2010.02.037 · Cited by 252
Prakash Menon, M., Selvakumar, R., Suresh kumar, P., & Ramakrishna, S. (2017) · RSC Advances · doi:10.1039/c7ra06713e · Cited by 252
The Potential of NanoCellulose in the Packaging Field: A Review
Li, F., Mascheroni, E., & Piergiovanni, L. (2015) · Packaging Technology and Science · doi:10.1002/pts.2121 · Cited by 243
“To overcome such problems, cellulose materials are generally run in multiples passes through the mechanical treatment and several variants and technological supports have been proposed in the last 30 years.(27,67,97,98) An attempt of summarizing the main routes available in mechanical treatments of cellulose materials…”
BackgroundZhu, J. Y., Sabo, R., & Luo, X. (2011) · Green Chemistry · doi:10.1039/c1gc15103g · Cited by 243
Cellulose as a nanostructured polymer: A short review
Ioelovich, M. (2008) · BioResources · doi:10.15376/biores.3.4.1403-1418 · Cited by 242
Water‐in‐oil Emulsions Stabilized by Hydrophobized Microfibrillated Cellulose
Andresen, M., & Stenius, P. (2007) · Journal of Dispersion Science and Technology · doi:10.1080/01932690701341827 · Cited by 238
“Furthermore, much work has been done preparing nanocomposites reinforced with MFC([4,5]) and other fibrillated cellulosicmaterials, including parenchymalmicrofibrils, bacterial cellulose,([9]) and in particular, cellulose nanocrystals.”
BackgroundLee, S.-Y., Chun, S.-J., Kang, I.-A., & Park, J.-Y. (2009) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2008.07.008 · Cited by 235
Preparation of cellulose nanofiber from softwood pulp by ball milling
Zhang, L., Tsuzuki, T., & Wang, X. (2015) · Cellulose · doi:10.1007/s10570-015-0582-6 · Cited by 234
“Among the mechanical methods, high pressure homogenization has been widely applied to isolate cellulose nanofiber from plants (Nakagaito and Yano 2004).”
Nanocellulose in Emulsions and Heterogeneous Water‐Based Polymer Systems: A Review
Kedzior, S. A., Gabriel, V. A., Dubé, M. A., & Cranston, E. D. (2021) · Advanced Materials · doi:10.1002/adma.202002404 · Cited by 230
Ferrer, A., Quintana, E., Filpponen, I., Solala, I., Vidal, T., Rodríguez, A., Laine, J., & Rojas, O. J. (2012) · Cellulose · doi:10.1007/s10570-012-9788-z · Cited by 225
“It is also believed that defects in NFC are better distributed and utilize a crack-stopping mechanism that results in better mechanical properties (Nakagaito and Yano 2004).”
BackgroundNanocellulose Materials – Different Cellulose, Different Functionality
Klemm, D., Schumann, D., Kramer, F., Heßler, N., Koth, D., & Sultanova, B. (2009) · Macromolecular Symposia · doi:10.1002/masy.200950608 · Cited by 222
Effects of cellulose nanofibrils on the structure and properties on PVA nanocomposites
Liu, D., Sun, X., Tian, H., Maiti, S., & Ma, Z. (2013) · Cellulose · doi:10.1007/s10570-013-0073-6 · Cited by 222
Effective Young’s Modulus of Bacterial and Microfibrillated Cellulose Fibrils in Fibrous Networks
Tanpichai, S., Quero, F., Nogi, M., Yano, H., Young, R. J., Lindström, T., Sampson, W. W., & Eichhorn, S. J. (2012) · Biomacromolecules · doi:10.1021/bm300042t · Cited by 221
Self-citationPelissari, F. M., Andrade-Mahecha, M. M., Sobral, P. J. D. A., & Menegalli, F. C. (2017) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2017.05.106 · Cited by 218
Zhou, Y. M., Fu, S. Y., Zheng, L. M., & Zhan, H. Y. (2012) · Express Polymer Letters · doi:10.3144/expresspolymlett.2012.85 · Cited by 216
“It involves high consumption of energy for processes as mechanical treatments [16], which can cause dramatic decrease in both the yield and fibril length down to 100–150 nm and also introduces damage to the environment, as in the case of chemical treatments [17].”
BackgroundNakagaito, A. N., & Yano, H. (2008) · Cellulose · doi:10.1007/s10570-008-9212-x · Cited by 215
“resulted in fibrous composites with fiber contents above 70 wt% ( Nakagaito and Yano 2004, 2005 ).”
BackgroundMethodResultSelf-citationBesbes, I., Vilar, M. R., & Boufi, S. (2011) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2011.06.015 · Cited by 215
Siqueira, G., Tapin-Lingua, S., Bras, J., da Silva Perez, D., & Dufresne, A. (2010) · Cellulose · doi:10.1007/s10570-010-9449-z · Cited by 212
“Sulfuric (Bondeson et al. 2006; Morandi et al. 2009; Beck-Candanedo et al. 2005) and hydrochloric (Araki et al. 2001; van den Berg et al. 2007) acids are commonly used to produce individualized rod-like cellulose nanocrystals since the discovery of this process by Ra ˚nby and Ribi (1949, 1950) Suspensions of cellulose…”
BackgroundPeng, X.-W., Ren, J.-L., Zhong, L.-X., & Sun, R.-C. (2011) · Biomacromolecules · doi:10.1021/bm2008795 · Cited by 212
Mechanical properties of natural fibre reinforced polymer composites
Singha, A. S., & Thakur, V. K. (2008) · Bulletin of Materials Science · doi:10.1007/s12034-008-0126-x · Cited by 211
Rebouillat, S., & Pla, F. (2013) · Journal of Biomaterials and Nanobiotechnology · doi:10.4236/jbnb.2013.42022 · Cited by 207
Metadata
- Authors
- Nakagaito, A. N., & Yano, H.
- Affiliations
- Kyoto University (JP)
- Corresponding author
- Yano, H.
- Venue
- Applied Physics A: Materials Science & Processing
- Published
- 2004-03-01
- Volume
- 78
- Issue
- 4
- Pages
- 547-552
- ISSN
- 0947-8396 (ISSN-L)
- 1432-0630
- OpenAlex
- W2035264658
- Cited by
- 608
- References
- 2
- Citations by year
- 2026: 9 · 2025: 14 · 2024: 22 · 2023: 23 · 2022: 37 · 2021: 43 · 2020: 42 · 2019: 35 · 2018: 37 · 2017: 40 · 2016: 33 · 2015: 43 · 2014: 35 · 2013: 37 · 2012: 29
- FWCI
- 8.59
- Type
- journal article
- Language
- en
- Open access
- Licence
- cc-by-nc-nd
- www.springer.com/tdm (tdm)
- Locations
- Applied Physics A (publishedVersion)
- Institutional Repositories DataBase (IRDB) (submittedVersion, cc-by-nc-nd)
- Topics
- Physical Sciences › Materials Science › Polymers and Plastics › Natural Fiber Reinforced Composites
- Physical Sciences › Materials Science › Biomaterials › Advanced Cellulose Research Studies
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Material Properties and Processing
- Keywords
- kraft pulp, natural fiber composites, phenolic resin, high-pressure homogenization, pulp refining, mechanical properties, flexural strength, water retention, surface area, cellulose nanocomposites
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.