The effect of morphological changes from pulp fiber towards nano-scale fibrillated cellulose on the mechanical properties of high-strength plant fiber based composites
Open accessThe DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
Fibrillated kraft pulp impregnated with phenolic resin was compressed under an extremely high pressure of 100 MPa to produce high strength cellulose nanocomposites. To evaluate how the degree of fibrillation of pulp fiber affects the mechanical properties of the final composites, kraft pulp subjected to various levels of refining and high pressure homogenization treatments was used as raw material with different phenolic resin contents. It was found that fibrillation solely of the surface of the fibers is not effective in improving composite strength, though there is a distinct point in the fibrillation stage at which an abrupt increase in the mechanical properties of composites occurs. In the range between 16 and 30 passes through refiner treatments, pulp fibers underwent a degree of fibrillation that resulted in a stepwise increment of mechanical properties, most strikingly in bending strength. This increase was attributed to the complete fibrillation of the bulk of the fibers. For additional high pressure homogenization-treated pulps, composite strength increased linearly against water retention values, which characterize the cellulose’s exposed surface area, and reached maximum value at 14 passes through the homogenizer.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“They observed that the disintegration could be improved by increasing the number of passes to 30 times.”
From Cellulosic Bionanocomposites: A Review of Preparation, Properties and Applications (2010) · cites this paper as [83]
Citations
Cites
Some microrheological aspects of wood-pulp fibres subjected to fatigue loading
Hamad, W. Y. (1997) · Cellulose · doi:10.1023/a:1018463117874 · Cited by 29
Modeling of the particle breakage kinetics in the wet mills for the paper industry
Roux, J., & Mayade, T. L. (1999) · Powder Technology · doi:10.1016/s0032-5910(99)00143-6 · Cited by 22
Cited by
Items 101–200 of 702
Environment Friendly Composite Materials: Biocomposites and Green Composites
Mitra, B. (2014) · Defence Science Journal · doi:10.14429/dsj.64.7323 · Cited by 205
Huang, X., & Netravali, A. N. (2009) · Composites Science and Technology · doi:10.1016/j.compscitech.2009.01.014 · Cited by 205
Preparation and characterization of starch-based composite films reinforced by cellulose nanofibers
Fazeli, M., Keley, M., & Biazar, E. (2018) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2018.04.186 · Cited by 201
Nanocellulose-Based Composites and Bioactive Agents for Food Packaging
Khan, A., Huq, T., Khan, R. A., Riedl, B., & Lacroix, M. (2014) · Critical Reviews in Food Science and Nutrition · doi:10.1080/10408398.2011.578765 · Cited by 196
“The fiber diameters are in the range 10–100 nm (Nakagaito & Yano, 2004, 2005).”
BackgroundCellulose nanocrystal (CNC)–inorganic hybrid systems: synthesis, properties and applications
Islam, M. S., Chen, L., Sisler, J., & Tam, K. C. (2018) · Journal of Materials Chemistry B · doi:10.1039/c7tb03016a · Cited by 196
Pracella, M., Haque, M. M.-U., & Puglia, D. (2014) · Polymer · doi:10.1016/j.polymer.2014.06.071 · Cited by 193
Qiu, K., & Netravali, A. N. (2012) · Composites Science and Technology · doi:10.1016/j.compscitech.2012.06.010 · Cited by 193
A new quality index for benchmarking of different cellulose nanofibrils
Desmaisons, J., Boutonnet, E., Rueff, M., Dufresne, A., & Bras, J. (2017) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2017.06.032 · Cited by 192
Nanocellulose for Industrial Use
Blanco, A., Monte, M. C., Campano, C., Balea, A., Merayo, N., & Negro, C. (2018) · Handbook of Nanomaterials for Industrial Applications · doi:10.1016/b978-0-12-813351-4.00005-5 · Cited by 190
Frone, A. N., Panaitescu, D. M., Donescu, D., Spataru, C. I., Radovici, C., Trusca, R., & Somoghi, R. (2010) · BioResources · doi:10.15376/biores.6.1.487-512 · Cited by 190
Banana fibers and microfibrils as lignocellulosic reinforcements in polymer composites
Ibrahim, M. M., Dufresne, A., El-Zawawy, W. K., & Agblevor, F. A. (2010) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2010.03.057 · Cited by 188
Wood cellulose biocomposites with fibrous structures at micro- and nanoscale
Sehaqui, H., Allais, M., Zhou, Q., & Berglund, L. A. (2011) · Composites Science and Technology · doi:10.1016/j.compscitech.2010.12.007 · Cited by 185
George, J., & Ishida, H. (2018) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2018.07.006 · Cited by 185
Liimatainen, H., Visanko, M., Sirviö, J., Hormi, O., & Niinimäki, J. (2013) · Cellulose · doi:10.1007/s10570-013-9865-y · Cited by 184
“2007) and refining (Nakagaito and Yano 2004).”
BackgroundSynthesis and mechanical properties of cotton fabric reinforced geopolymer composites
Alomayri, T. S., Shaikh, F. U. A., & Low, I. M. (2014) · Composites Part B Engineering · doi:10.1016/j.compositesb.2013.12.036 · Cited by 184
“7G), resulting in the formation of micro fibrils which increase the fibre specific surface area [29, 30].”
BackgroundMascheroni, E., Rampazzo, R., Ortenzi, M. A., Piva, G., Bonetti, S., & Piergiovanni, L. (2016) · Cellulose · doi:10.1007/s10570-015-0853-2 · Cited by 183
Agricultural Waste Fibers Towards Sustainability and Advanced Utilization: A Review
Dungani, R., Karina, M., ., S., Sulaeman, A., Hermawan, D., & Hadiyane, A. (2015) · Asian Journal of Plant Sciences · doi:10.3923/ajps.2016.42.55 · Cited by 182
“Chakraborty et al. (2005), Abe et al. (2009) and Nakagaito and Yano (2004) have isolated fibers using mechanical treatments, whereas chemical treatments have been used to isolate fibers by Araki et al. (2001) and Liu et al. (2010).”
MethodAnsari, F., Galland, S., Johansson, M., Plummer, C. J. G., & Berglund, L. A. (2014) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2014.03.017 · Cited by 182
Solala, I., Iglesias, M. C., & Peresin, M. S. (2020) · Cellulose · doi:10.1007/s10570-019-02899-8 · Cited by 178
Ravindran, L., M.S., S., & Thomas, S. (2019) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2019.03.134 · Cited by 177
Waste paper: An underutilized but promising source for nanocellulose mining
Kumar, V., Pathak, P., & Bhardwaj, N. K. (2020) · Waste Management · doi:10.1016/j.wasman.2019.10.041 · Cited by 175
Bhat, A. H., Khan, I., Usmani, M. A., Umapathi, R., & Al-Kindy, S. M. Z. (2019) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2018.12.190 · Cited by 169
A critical review on food waste management for the production of materials and biofuel
Lahiri, A., Santhanaraj, D., Rajakumar, K., Ramkumar, V., Adinaveen, T., & Peter, L. S. (2023) · Journal of Hazardous Materials Advances · doi:10.1016/j.hazadv.2023.100266 · Cited by 169
A Review on Micro- to Nanocellulose Biopolymer Scaffold Forming for Tissue Engineering Applications
Khalil, H. P. S. A., Jummaat, F. B., Yahya, E. B., Olaiya, N. G., Adnan, A. S., Abdat, M., Nasir, N. A. M., Halim, A. S., Kumar, U. S. U., Bairwan, R. D., et al. (2020) · Polymers · doi:10.3390/polym12092043 · Cited by 166
“Nakagaito & Yano (2004) Applying of cellulose microfibril for semi-structural applications [67]”
BackgroundBiocomposites from abaca strands and polypropylene. Part I: Evaluation of the tensile properties
Vilaseca, F., Valadez-González, A., Herrera-Franco, P. J., Pèlach, M. À., López, J. P., & Mutjé, P. (2009) · Bioresource Technology · doi:10.1016/j.biortech.2009.07.066 · Cited by 165
Bacterial cellulose films with controlled microstructure–mechanical property relationships
Retegi, A., Gabilondo, N., Peña, C., Zuluaga, R., Castro, C., Gañan, P., de la Caba, K., & Mondragon, I. (2010) · Cellulose · doi:10.1007/s10570-009-9389-7 · Cited by 160
“This conclusion is also supported by other studies where elastic modulus of BC is attributed to the planar and straight orientation of the continuous and dimensionally uniform three-dimensional cellulose structure (Eichhorn and Young 2001; Nakagaito and Yano 2004 ).”
ResultMujtaba, M., Salaberria, A. M., Andres, M. A., Kaya, M., Gunyakti, A., & Labidi, J. (2017) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2017.06.127 · Cited by 160
Nechyporchuk, O., Pignon, F., & Belgacem, M. N. (2015) · Journal of Materials Science · doi:10.1007/s10853-014-8609-1 · Cited by 159
“In this context, two types of equipment are employed: homogenizers [4, 5, 10–12] and microfluidizers [11, 13–15].”
MethodStarch/PVA-based nanocomposites reinforced with bamboo nanofibrils
Guimarães, M., Botaro, V. R., Novack, K. M., Teixeira, F. G., & Tonoli, G. H. D. (2015) · Industrial Crops and Products · doi:10.1016/j.indcrop.2015.03.014 · Cited by 159
“The gap between the silicon carbide stones in the defibrillator was adjusted to 100 m (Nakagaito and Yano, 2004) and suspensions from refined/bleached fibers were fed several times until form a gel, which began to happen after 15 passages through the defibrillator (Bufalino et al., 2014; Guimarães…”
BackgroundMethodInfluentialDíez, I., Eronen, P., Österberg, M., Linder, M. B., Ikkala, O. T., & Ras, R. H. A. (2011) · Macromolecular Bioscience · doi:10.1002/mabi.201100099 · Cited by 159
Malho, J., Laaksonen, P. H., Walther, A., Ikkala, O. T., & Linder, M. B. (2012) · Biomacromolecules · doi:10.1021/bm2018189 · Cited by 151
Preparation of nanocellulose and its potential in reinforced composites: A review
Wang, J., Liu, X., Jin, T., He, H., & Liu, L. (2019) · Journal of Biomaterials Science Polymer Edition · doi:10.1080/09205063.2019.1612726 · Cited by 149
“[52] found that the slurry was treated by a refiner for 16-30 times to completely defibrillate the fibrils, and the mechanical properties gradually increased, especially the bending strength.”
BackgroundRecent advances of nanocellulose in drug delivery systems
Hasan, N., Rahman, L., Kim, S.-H., Cao, J., Arjuna, A., Lallo, S., Jhun, B. H., & Yoo, J. (2020) · Journal of Pharmaceutical Investigation · doi:10.1007/s40005-020-00499-4 · Cited by 142
Reduction of water wettability of nanofibrillated cellulose by adsorption of cationic surfactants
Xhanari, K., Syverud, K., Chinga‐Carrasco, G., Paso, K. G., & Stenius, P. J. (2010) · Cellulose · doi:10.1007/s10570-010-9482-y · Cited by 140
“Nakagaito and Yano (2004, 2005) produced high-strength nanocomposites with a phenol‐formaldehyde resin.”
BackgroundLife cycle assessment of nanocellulose-reinforced advanced fibre composites
Hervy, M., Evangelisti, S., Lettieri, P., & Lee, K. (2015) · Composites Science and Technology · doi:10.1016/j.compscitech.2015.08.024 · Cited by 137
“thermoplastics between nanopapers [60] and dipping of nanopapers into organic solvents containing dissolved monomer/ polymer, followed by solvent evaporation and crosslinking [62].”
Enhanced film forming and film properties of amylopectin using micro-fibrillated cellulose
López‐Rubio, A., Lagaron, J. M., Ankerfors, M., Lindström, T., Nordqvist, D., Mattozzi, A., & Hedenqvist, M. S. (2006) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2006.08.008 · Cited by 137
Characterization of cellulose nanofibrillation by micro grinding
Nair, S. S., Zhu, J. Y., Deng, Y., & Ragauskas, A. J. (2014) · Journal of Nanoparticle Research · doi:10.1007/s11051-014-2349-7 · Cited by 135
“…or other methods of mechanical fibrillation process such as homogenizer or micro fluidizers have shown that significant improvements in the mechanical properties occur after the internal fibrillation of the cellulose fibers into nanosized fibrils (Nakagaito and Yano 2004; Stelte and Sanadi 2009).”
BackgroundInfluentialVallejos, M. E., Felissia, F. E., Área, M. C., Ehman, N. V., Tarrés, Q., & Mutjé, P. (2015) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2015.12.004 · Cited by 132
“The use of CNF as reinforcement improves the permeability 110 and tensile index of papers (Eriksen, 2008; González, Boufi, Pèlach, Alcalà, Vilaseca & 111 Mutjé, 2012; Mörseburg & Chinga-Carrasco, 2009; Nakagaito & Yano, 2004; Taipale, 112 Österberg, Nykänen, Ruokolainen & Laine, 2010).”
MethodYadav, C., Saini, A., Zhang, W., You, X., Chauhan, I., Mohanty, P., & Li, X. (2020) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2020.11.038 · Cited by 130
Orasugh, J. T., Saha, N. R., Rana, D. K., Sarkar, G., Mollick, M. M. R., Chattopadhyay, A. K., Mitra, B. C., Mondal, D., Ghosh, S. K., & Chattopadhyay, D. (2018) · Industrial Crops and Products · doi:10.1016/j.indcrop.2017.12.069 · Cited by 128
Preparation of spherical nanocellulose from waste paper by aqueous NaOH/thiourea
Zhang, S., Zhang, F., Jin, L., Liu, B., Mao, Y. H., Liu, Y., & Huang, J. (2019) · Cellulose · doi:10.1007/s10570-019-02434-9 · Cited by 127
Nakagaito, A. N., & Yano, H. (2007) · Cellulose · doi:10.1007/s10570-007-9168-2 · Cited by 126
“A few years ago, the present authors developed a new kind of fiber-rich cellulose-based nanocomposite making the best use of the high strength of cellulose microfibrils utilizing a cellulose morphology known as microfibrillated cellulose (MFC) and phenolic resin (Nakagaito and Yano 2005; Nakagaito and Yano 2004) as we…”
BackgroundSelf-citationStructure–property relationship of all-cellulose composites
Duchemin, B., Newman, R. H., & Staiger, M. P. (2009) · Composites Science and Technology · doi:10.1016/j.compscitech.2009.02.027 · Cited by 123
“These cellulose sources include bacterial cellulose [12,13], microfibrillated cellulose [14–16] and cellulose whiskers [17–19].”
BackgroundLi, W. H., Wu, Q., Zhao, X., Huang, Z., Cao, J., Li, J., & Liu, S. (2014) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2014.07.031 · Cited by 121
Zhai, T., Zheng, Q., Cai, Z., Turng, L., Xia, H., & Gong, S. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b01679 · Cited by 121
Salgado‐Cruz, M. D. L. P., Calderón‐Domínguez, G., Chanona‐Pérez, J. J., Farrera‐Rebollo, R. R., Méndez‐Méndez, J. V., & Díaz‐Ramírez, M. (2013) · Industrial Crops and Products · doi:10.1016/j.indcrop.2013.09.036 · Cited by 119
Iwamoto, S., Yamamoto, S., Lee, S. H., & Endo, T. (2013) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2013.12.011 · Cited by 116
Hydrogels Prepared from Cross-Linked Nanofibrillated Cellulose
Nair, S. S., Zhu, J. Y., Deng, Y., & Ragauskas, A. J. (2014) · ACS Sustainable Chemistry & Engineering · doi:10.1021/sc400445t · Cited by 115
Zhu, J. Y., Agarwal, U. P., Ciesielski, P. N., Himmel, M. E., Gao, R., Deng, Y., Morits, M., & Österberg, M. (2021) · Biotechnology for Biofuels · doi:10.1186/s13068-021-01963-5 · Cited by 114
dos Santos, F. A., Iulianelli, G. C. V., & Tavares, M. I. B. (2016) · Materials Sciences and Applications · doi:10.4236/msa.2016.75026 · Cited by 113
“All of the mechanical methods listed involve high consumption of energy, which can cause a dramatic decrease in both the yield and fibril length [223].”
BackgroundKim, S. M., Dien, B. S., Tumbleson, M. E., Rausch, K. D., & Singh, V. (2016) · Bioresource Technology · doi:10.1016/j.biortech.2016.06.003 · Cited by 111
Wang, H., Zhang, X., Jiang, Z., Li, W., & Yu, Y. (2015) · Industrial Crops and Products · doi:10.1016/j.indcrop.2015.03.086 · Cited by 108
Wu, T., Farnood, R., O’Kelly, K., & Chen, B. (2014) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2014.01.014 · Cited by 108
“Chitosan nanocomposites filled by NFC are full-polysaccharide nanocomposites, which are a relatively new class of materials (Hassan et al., 2011, 2012; Li et al., 2009; Nakagaito and Yano, 2004, 2005; Tsourounaki et al., 2008).”
Preparation of cross-linked cellulose nanofibril aerogel with water absorbency and shape recovery
Kim, C. H., Youn, H. J., & Lee, H. L. (2015) · Cellulose · doi:10.1007/s10570-015-0745-5 · Cited by 107
“…several pretreatment techniques including oxidation (Saito et al. 2006, 2007; Isogai et al. 2011), carboxymethylaion (Aulin et al. 2010; Taipale et al. 2010), and enzymatic hydrolysis (Pääkkö et al. 2007; Henriksson et al. 2007; Siqueira et al. 2010) of cellulose fiber have been suggested.”
Thermal and mechanical properties of cotton fabric-reinforced geopolymer composites
Alomayri, T. S., Shaikh, F. U. A., & Low, I. M. (2013) · Journal of Materials Science · doi:10.1007/s10853-013-7479-2 · Cited by 108
Holocellulose Nanofibers of High Molar Mass and Small Diameter for High-Strength Nanopaper
Galland, S., Berthold, F., Prakobna, K., & Berglund, L. A. (2015) · Biomacromolecules · doi:10.1021/acs.biomac.5b00678 · Cited by 106
Correia, V. D. C., dos Santos, S. F., Teixeira, R. S., & Savastano, H. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.11.066 · Cited by 105
Stimuli-Responsive Polysaccharide Hydrogels for Biomedical Applications: a Review
Gholamali, I. (2019) · Regenerative Engineering and Translational Medicine · doi:10.1007/s40883-019-00134-1 · Cited by 105
Wang, Q., Zhu, J. Y., & Considine, J. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am302967m · Cited by 105
Nanofibrillation of deep eutectic solvent-treated paper and board cellulose pulps
Suopajärvi, T., Sirviö, J. A., & Liimatainen, H. (2017) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2017.04.009 · Cited by 103
Fabrication and study of lignocellulosic Hibiscus sabdariffa fiber reinforced polymer composites
Singha, A. S., & Thakur, V. K. (2008) · BioResources · doi:10.15376/biores.3.4.1173-1186 · Cited by 102
“1174 Currently a variety of studies are ongoing to find ways to use lignocellulosic natural fibers in place of synthetic fibers in various applications (Singha and Shama 2007; Panthapulakkal et al. 2006; Chauhan et al. 1999, 2000).”
BackgroundWoehl, M. A., Canestraro, C. D., Mikowski, A., Sierakowski, M. R., Ramos, L. P., & Wypych, F. (2010) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2009.12.045 · Cited by 102
Tanaka, R., Saito, T., Hondo, H., & Isogai, A. (2015) · Biomacromolecules · doi:10.1021/acs.biomac.5b00539 · Cited by 102
Zhong, L. X., Fu, S. Y., Zhou, X. S., & Zhan, H. Y. (2010) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2010.11.010 · Cited by 100
Bakkari, M. E., Bindiganavile, V., Goncalves, J., & Boluk, Y. (2018) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2018.09.036 · Cited by 100
Arantes, V., Dias, I. K. R., Berto, G. L., Pereira, B., Marotti, B. D. S., & Nogueira, C. F. O. (2020) · Cellulose · doi:10.1007/s10570-020-03332-1 · Cited by 99
Natural fibres-based polymers: Part I—Mechanical analysis of Pine needles reinforced biocomposites
Thakur, V. K., & Singha, A. S. (2010) · Bulletin of Materials Science · doi:10.1007/s12034-010-0040-x · Cited by 98
“Among these, polymer matrices are currently being used to a larger extent because of their enormous advantages (Ray et al 2001; Nakagaito and Yano 2004, 2005; Majumdar and Adhikari 2005; Panthapulakkal et al 2006).”
BackgroundMechanochemical Transformations of Biomass into Functional Materials
Hajiali, F., Jin, T., Yang, G., Santos, M., Lam, E., & Moores, A. (2022) · ChemSusChem · doi:10.1002/cssc.202102535 · Cited by 99
Nanocellulosen: eine neue Familie naturbasierter Materialien
Klemm, D., Kramer, F., Moritz, S., Lindström, T., Ankerfors, M., Gray, D. G., & Dorris, A. (2011) · Angewandte Chemie · doi:10.1002/ange.201001273 · Cited by 98
Wang, M., Olszewska, A., Walther, A., Malho, J., Schacher, F. H., Ruokolainen, J., Ankerfors, M., Laine, J., Berglund, L. A., Österberg, M., et al. (2011) · Biomacromolecules · doi:10.1021/bm101561m · Cited by 97
Mechanical properties of cellulose‐based multiscale composites: A review
Ganapathy, V., Gunasegeran, M., Sudhagar, P. E., Rashedi, A., Norrrahim, M. N. F., Ilyas, R. A., Goh, K. L., Jawaid, M., & Naveen, J. (2022) · Polymer Composites · doi:10.1002/pc.27175 · Cited by 96
Crystallization behavior of poly(lactic acid)/microfibrillated cellulose composite
Song, Y., Tashiro, K., Xu, D., Liu, J., & Bin, Y. (2013) · Polymer · doi:10.1016/j.polymer.2013.04.054 · Cited by 96
Nanocellulose Polymer Composites as Innovative Pool for (Bio)Material Development
Kramer, F., Klemm, D., Schumann, D., Heßler, N., Wesarg, F., Fried, W., & Stadermann, D. (2006) · Macromolecular Symposia · doi:10.1002/masy.200651213 · Cited by 95
Rallini, M., & Kenny, J. M. (2016) · Elsevier eBooks · doi:10.1016/b978-0-323-44353-1.00003-8 · Cited by 94
Cellulose derivatives as environmentally-friendly additives in water-based drilling fluids: A review
Khan, M. A., Li, M., Lv, K., Sun, J., Liu, C., Liu, X., Shen, H., Dai, L., & Lalji, S. M. (2024) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2024.122355 · Cited by 94
Nanocrystalline cellulose extracted from bast fibers: Preparation, characterization, and application
Shen, P., Tang, Q., Chen, X., & Li, Z. (2022) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2022.119462 · Cited by 95
Barari, B., Ellingham, T., Qamhia, I. I. A., Pillai, K. M., Elhajjar, R. F., Turng, L., & Sabo, R. C. (2015) · Composites Part B Engineering · doi:10.1016/j.compositesb.2015.08.040 · Cited by 92
Liu, K., Lin, X., Chen, L., Huang, L., Cao, S., & Wang, H. (2013) · Journal of Agricultural and Food Chemistry · doi:10.1021/jf4010065 · Cited by 92
Study of mechanical properties of urea-formaldehyde thermosets reinforced by pine needle powder
Singha, A. S., & Thakur, V. K. (2009) · BioResources · doi:10.15376/biores.4.1.292-308 · Cited by 90
“At present various studies are ongoing to find ways to use ecofriendly lignocellulosic bio-fibers in place of toxic synthetic fibers in various applications (Singha and Thakur 2007; Panthapulakkal et al. 2006; Chauhan et al. 1999, 2000; Saheb et al. 1999; Bhatnagar et al. 2005).”
BackgroundAbou‐Yousef, H., Dacrory, S., Hasanin, M. S., El‐Sayed, E. S. A., & Kamel, S. M. (2021) · Sustainable Chemistry and Pharmacy · doi:10.1016/j.scp.2021.100419 · Cited by 88
Development of continuous process enabling nanofibrillation of pulp and melt compounding
Suzuki, K., Okumura, H., Kitagawa, K., Sato, S., Nakagaito, A. N., & Yano, H. (2012) · Cellulose · doi:10.1007/s10570-012-9843-9 · Cited by 88
“As a result, cellulose microfibrils, 10–20 nm wide bundles of cellulose microfibrils, and MFC, a mechanically fibrillated pulp consisting of fibrils and fiber fragments with various dimensions in which fibrils in nanoscale is a major fraction (Chinga-Carrasco 2011), have been extracted from plant fibers and their rein…”
BackgroundSelf-citationPreparation of ultrastrength nanopapers using cellulose nanofibrils
Chun, S., Lee, S.-Y., Doh, G.-H., Lee, S. I., & Kim, J. H. (2011) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2010.10.022 · Cited by 88
Cellulose nanomaterials in oil and gas industry: Current status and future perspectives
Li, M., Liu, X., Lv, K., Sun, J., Dai, C., Liao, B., Liu, C., Mei, C., Wu, Q., & Hubbe, M. A. (2023) · Progress in Materials Science · doi:10.1016/j.pmatsci.2023.101187 · Cited by 89
Microfibrillated cellulose from bamboo pulp and its properties
Zhang, J., Song, H., Lin, L., Zhuang, J., Pang, C., & Liu, S. (2010) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2010.06.013 · Cited by 87
Nanocellulose-Based Materials for Water Pollutant Removal: A Review
Abdelhamid, H. N. (2024) · International Journal of Molecular Sciences · doi:10.3390/ijms25158529 · Cited by 88
“A study reported that the disintegration was improved as the number of passes through the homogenizer increased, eventually reaching a total of 30 passes at a high pressure of 100 MPa [44].”
BackgroundNanocellulose-Based Composites
Spence, K. L., Habibi, Y., & Dufresne, A. (2011) · Springer eBooks · doi:10.1007/978-3-642-17370-7_7 · Cited by 86
Fabrication and characterization of S. cilliare fibre reinforced polymer composites
Singha, A. S., & Thakur, V. K. (2009) · Bulletin of Materials Science · doi:10.1007/s12034-009-0008-x · Cited by 86
Srithep, Y., Turng, L., Sabo, R. C., & Clemons, C. C. (2012) · Cellulose · doi:10.1007/s10570-012-9726-0 · Cited by 86
“suspensions of cellulose has been used to break many of the bonds, often after chemical or enzymatic pretreatment, resulting in microfibrillated and even nanofibrillated cellulose (NFC) if sufficient energy is applied (Nakagaito and Yano 2004; Andresen et al. 2006; Iwamoto et al. 2007; Alemdar and Sain 2008).”
BackgroundPrakobna, K., Galland, S., & Berglund, L. A. (2015) · Biomacromolecules · doi:10.1021/bm5018194 · Cited by 87
Shrestha, S., A., J. A. D., Ghanbari, S., & Youngblood, J. P. (2017) · Biomacromolecules · doi:10.1021/acs.biomac.7b00026 · Cited by 86
Jonasson, S., Bünder, A., Niittylä, T., & Oksman, K. (2019) · Cellulose · doi:10.1007/s10570-019-02754-w · Cited by 85
Siqueira, G. D. F., Oksman, K., Tadokoro, S. K., & Mathew, A. P. (2015) · Composites Science and Technology · doi:10.1016/j.compscitech.2015.12.001 · Cited by 85
Mechanical, Thermal and Morphological Properties of Grewia Optiva Fiber/Polymer Matrix Composites
Singha, A. S., & Thakur, V. K. (2009) · Polymer-Plastics Technology and Engineering · doi:10.1080/03602550802634550 · Cited by 84
Mishra, S., Thirree, J., Manent, A.-S., Chabot, B., & Daneault, C. (2010) · BioResources · doi:10.15376/biores.6.1.121-143 · Cited by 84
““Ultrasound, TEMPO, nanocellulose,” BioResources 6(1), 121-143 122 Henriksson and Berglund 2007; Iwamoto et al. 2005, 2007; Janardhnan and Sain 2006; Nakagaito and Yano 2004; Paakko et al. 2007; Saito et al. 2005, 2006a,b; Taniguchi and Okamura 1998; Wang and Sain 2007).”
A systematic review of cellulosic material for green electronics devices
Khurd, A. S., & Kandasubramanian, B. (2022) · Carbohydrate Polymer Technologies and Applications · doi:10.1016/j.carpta.2022.100234 · Cited by 83
Suzuki, K., Sato, A., Okumura, H., Hashimoto, T., Nakagaito, A. N., & Yano, H. (2013) · Cellulose · doi:10.1007/s10570-013-0143-9 · Cited by 83
“…cellulose have generated great interest as reinforcements for plastics (Samir et al. 2005; Hubbe et al. 2008), and have stimulated much research (Nakagaito and Yano 2004; Chakraborty et al. 2006; Eichhorn et al. 2010; Samir et al. 2004; Abe et al. 2007; Siró and Plackett 2010; Klemm et al.…”
BackgroundSelf-citationDimić‐Mišić, K., Puisto, A., Gane, P. A. C., Nieminen, K., Alava, M. J., Paltakari, J., & Maloney, T. C. (2013) · Cellulose · doi:10.1007/s10570-013-0076-3 · Cited by 83
“water (Iotti et al. 2011; Nakagaito and Yano 2004).”
Vishnu, R., Revathiswaran, R., Subramanian, K. S., Parthiban, K. T., Chandrakumar, K., Anoop, E. V., & Chirayil, C. J. (2023) · Scientific Reports · doi:10.1038/s41598-022-26600-5 · Cited by 83
Mathew, A. P., Oksman, K., Pierron, D., & Harmad, M.-F. (2011) · Cellulose · doi:10.1007/s10570-011-9624-x · Cited by 81
Berto, G. L., & Arantes, V. (2019) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2019.01.169 · Cited by 79
Metadata
- Authors
- Nakagaito, A. N., & Yano, H.
- Affiliations
- Kyoto University (JP)
- Corresponding author
- Yano, H.
- Venue
- Applied Physics A: Materials Science & Processing
- Published
- 2004-03-01
- Volume
- 78
- Issue
- 4
- Pages
- 547-552
- ISSN
- 0947-8396 (ISSN-L)
- 1432-0630
- OpenAlex
- W2035264658
- Cited by
- 608
- References
- 2
- Citations by year
- 2026: 9 · 2025: 14 · 2024: 22 · 2023: 23 · 2022: 37 · 2021: 43 · 2020: 42 · 2019: 35 · 2018: 37 · 2017: 40 · 2016: 33 · 2015: 43 · 2014: 35 · 2013: 37 · 2012: 29
- FWCI
- 8.59
- Type
- journal article
- Language
- en
- Open access
- Licence
- cc-by-nc-nd
- www.springer.com/tdm (tdm)
- Locations
- Applied Physics A (publishedVersion)
- Institutional Repositories DataBase (IRDB) (submittedVersion, cc-by-nc-nd)
- Topics
- Physical Sciences › Materials Science › Polymers and Plastics › Natural Fiber Reinforced Composites
- Physical Sciences › Materials Science › Biomaterials › Advanced Cellulose Research Studies
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Material Properties and Processing
- Keywords
- kraft pulp, natural fiber composites, phenolic resin, high-pressure homogenization, pulp refining, mechanical properties, flexural strength, water retention, surface area, cellulose nanocomposites
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.