The effect of morphological changes from pulp fiber towards nano-scale fibrillated cellulose on the mechanical properties of high-strength plant fiber based composites
Open accessThe DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
Fibrillated kraft pulp impregnated with phenolic resin was compressed under an extremely high pressure of 100 MPa to produce high strength cellulose nanocomposites. To evaluate how the degree of fibrillation of pulp fiber affects the mechanical properties of the final composites, kraft pulp subjected to various levels of refining and high pressure homogenization treatments was used as raw material with different phenolic resin contents. It was found that fibrillation solely of the surface of the fibers is not effective in improving composite strength, though there is a distinct point in the fibrillation stage at which an abrupt increase in the mechanical properties of composites occurs. In the range between 16 and 30 passes through refiner treatments, pulp fibers underwent a degree of fibrillation that resulted in a stepwise increment of mechanical properties, most strikingly in bending strength. This increase was attributed to the complete fibrillation of the bulk of the fibers. For additional high pressure homogenization-treated pulps, composite strength increased linearly against water retention values, which characterize the cellulose’s exposed surface area, and reached maximum value at 14 passes through the homogenizer.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“They observed that the disintegration could be improved by increasing the number of passes to 30 times.”
From Cellulosic Bionanocomposites: A Review of Preparation, Properties and Applications (2010) · cites this paper as [83]
Citations
Cites
Some microrheological aspects of wood-pulp fibres subjected to fatigue loading
Hamad, W. Y. (1997) · Cellulose · doi:10.1023/a:1018463117874 · Cited by 29
Modeling of the particle breakage kinetics in the wet mills for the paper industry
Roux, J., & Mayade, T. L. (1999) · Powder Technology · doi:10.1016/s0032-5910(99)00143-6 · Cited by 22
Cited by
Items 601–700 of 702
The 21st Century Paper Using Cellulose Nanofibers
Nogi, M., & Yano, H. (2009) · Journal of the Japan Society of Colour Material · doi:10.4011/shikizai.82.351 · Cited by 1
Self-citationImpact of polymeric additives on the functionality of microfibrillar cellulose
Agarwal, D. (2016) · Nottingham ePrints (University of Nottingham) · Cited by 1
Vatansever, A. (2015) · Istanbul Technical University Academic Open Archive (Istanbul Technical University) · Cited by 1
Development and characterization of cotton and cotton fabric reinforced geopolymer composites
Alomayri, T. S. (2015) · eSpace (Curtin University) · Cited by 1
Falcoz-Vigne, L. (2016) · theses.fr (ABES) · doi:10.70675/3e879676za504z4ab6z9c9azaa5a92c3cce2 · Cited by 1
Ciftci, D. (2017) · ERA: Education and Research Archive (University of Alberta) · doi:10.7939/r39g5gs0g · Cited by 1
“Homogenizers were widely used by other researchers as well to obtain nanofibers (Besbes et al., 2011; Dufresne et al., 2000; Hassan et al., 2011; Henriksson et al., 2007; Iwamoto et al., 2005; Liimatainen et al., 2014; Nakagaito and Yano, 2004).”
BackgroundAlvareli, L. G. (2018) · Digital Library of Theses and Dissertations (Universidade de São Paulo) · doi:10.11606/d.97.2018.tde-08062018-184152 · Cited by 1
Villada, V., & Andrea, Y. (2019) · Americanae (AECID Library) · Cited by 1
Teixeira, L. T. (2019) · doi:10.17771/pucrio.acad.51392 · Cited by 1
Molina, F. M. P. (2013) · doi:10.47749/t/unicamp.2013.905822 · Cited by 1
Dufresne, A. (2015) · Taylor & Francis eBooks · doi:10.1081/e-enn3-120053539 · Cited by 1
The development of an advanced biorefinery to produce cellulosic sugars and bionanomaterials
Nogueira, C. F. D. O. (2023) · Digital Library of Theses and Dissertations (Universidade de São Paulo) · doi:10.11606/t.97.2023.tde-12012024-124547 · Cited by 1
Balquinta, M. L. (2025) · El Servicio de Difusión de la Creación Intelectual (National University of La Plata) · doi:10.35537/10915/187240 · Cited by 1
Li, Y. (2015) · Griffith Research Online · doi:10.25904/1912/3458 · Cited by 1
Optimizacija pridobivanja nanofibrilirane celuloze iz lesne biomase
Bertoncelj, J. (2024) · Repository of the University of Ljubljana (University of Ljubljana) · Cited by 1
NanoSteamEx : production de cellulose microfibrillée par explosion à la vapeur
Nader, S. (2021) · theses.fr (ABES) · doi:10.70675/5e7d756cz5fdbz4d45z8a16z86cbe4402c7f · Cited by 1
Guivier, M. (2023) · theses.fr (ABES) · doi:10.70675/3f625d5az21b5z4162zb931z8ab82f4f8d05 · Cited by 1
Tanpichai, S. (2012) · Research Explorer (The University of Manchester) · Cited by 1
Nakagaito, A. N. (2005) · Sustainable humanosphere : bulletin of Research Institute for Sustainable Humanosphere Kyoto University
Self-citationHarm reduction initiatives for drug users and the general population: what value to society?
O’Shea, J., & Keenan, E. (2004) · HRB National Drugs Library (Health Research Board)
Control of Filler Phase Dispersion in Bio‐Based Nanocomposites by In‐situ Reactive Polymerization
Pranger, L. A., Nunnery, G. A., & Tannenbaum, R. (2011) · Wiley eBooks · doi:10.1002/9783527640102.ch6
Biocomposites Based on Core-Shell Cellulose Nanofibers : Preparation, Structure, and Properties
Prakobna, K. (2015) · DiVA (Digitala Vetenskapliga Arkivet)
Oxydation au TEMPO d'une pâte kraft dans la fabrication de papiers hautement chargés
Guimond, R. (2010) · Le dépôt institutionnel (Université du Québec à Trois-Rivières)
Investigations Concerning the Ion Exchange in Functionalized Cellulose Depth Filter Sheets
Lösch, S., & Peuker, U. A. (2013) · Chemie Ingenieur Technik · doi:10.1002/cite.201300019
Yao, J. B. (2011) · University of Minnesota Digital Conservancy (University of Minnesota)
Preparation and Properties of Nanocellulose Films
Bajpai, P. (2016) · Elsevier eBooks · doi:10.1016/b978-0-12-811101-7.00005-8
Isolation of Cellulose Nanofibres: Elucidation of a Novel Approach Utilizing Fungal Pretreatment
Janardhnan, S. (2012) · TSpace (University of Toronto)
The Mechanical Properties of the Scaffolds Reinforced by Fibres or Tubes for Tissue Repair
Pentlavalli, S., McCarthy, H. O., & Dunne, N. (2017) · Springer eBooks · doi:10.1007/978-981-10-3554-8_3
MARCHI, M. D., Penasa, M., & Cassandro, M. (2015) · Padua Research Archive (University of Padova)
Les propriétés de papiers structurés en direction Z à base de nanocellulose fibrillée
Charfeddine, M. A. (2017) · Le dépôt institutionnel (Université du Québec à Trois-Rivières)
Polypropylene (PP)/Cellulose‐Based Biocomposites and Bionanocomposites
Haque, M. M. (2017) · Wiley eBooks · doi:10.1002/9781119283621.ch2
김채훈 (2015) · Seoul National University Open Repository (Seoul National University)
Développement d'un composite polypyrrole-nanocellulose
Bibeau, B. (2017) · Le dépôt institutionnel (Université du Québec à Trois-Rivières)
Composite Hydrogels of Alginate and Cellulose Nanofibrils - A study of mechanical properties
Pedersen, I. S. (2018) · NORA - Norwegian Open Research Archives
Electrospinning Technology: Cellulose and Cellulose Derivatives
Frey, M. W. (2015) · Taylor & Francis eBooks · doi:10.1081/e-ebpp-120052052
Use of nanocellulose for security paper
Desmaisons, J. (2018) · theses.fr (ABES) · doi:10.70675/2b18b890z9946z454dz8387z4920dc840ec4
Produção de nanocelulose para aplicação em papel de impressão e escrita
Godinho, D. A. (2017) · Portuguese National Funding Agency for Science, Research and Technology (RCAAP Project by FCT)
Jatorri berriztagarria duten zuntz zelulosikoz indarturiko polimero konpositeak
Orue, A. (2017) · Communities in ADDI (Universidad del Pais Vasco)
植物由来の高強度ナノファイバー「セルロースナノファイバー」の製造
阿部, 賢. (2017) · Kyoto University Research Information Repository (Kyoto University)
Giorgio, L. D. (2019) · El Servicio de Difusión de la Creación Intelectual (National University of La Plata) · doi:10.35537/10915/74750
Features of process of preliminary grind of cellulose-containing materials
Onoiko, T. (2019) · E3S Web of Conferences · doi:10.1051/e3sconf/201910401012
Development of Cellulose Nanofiber Reinforced Poly(Methyl Methacrylate)
Bennett, T. H. (2019) · Scholarship@Western (Western University)
Diversifier l'industrie papetière vers la nanocellulose : l'approche enzymo-mécanique
Bombeck, P.-L. (2019) · ORBi (University of Liège)
High Performance Reinforced Hemp-Lime Nanocomposite Construction Materials
Khalaf, F. J. (2019) · Sheffield Hallam University · doi:10.7190/shu-thesis-00266
“A bacterial cellulose ribbon was saturated with phenolic resin and it showed a higher strength than micro-fibrillated cellulose; Young's Modulus increased from 19 to 28 GPa and the bending strength increased from 370 to 425 MPa (A. N. Nakagaito, Iwamoto, & Yano, 2004; A.N. Nakagaito & Yano, 2004).”
BackgroundThe Mechanical response of Protein Films under Low-Level Plasticization.
Eni, E. U. (2020) · NCSU Libraries Repository (North Carolina State University Libraries)
Oliver, R., Morehead, S., Hunt, J., Perry, J. J. B., Downs, R., & Kangas, H. (2020) · Northumbria Research Link (Northumbria University)
Gluten replacement and starch reduction in producing gluten free bread
Ren, Y. (2020) · Nottingham ePrints (University of Nottingham)
Cellulose Nano-fiber and Plastic
Semba, T. (2018) · Seikei-Kakou · doi:10.4325/seikeikakou.30.361
Sustainable Lignocellulosic Nanomaterials for Future Green Applications
Ngo, T.-D., Chandra, R. P., & Ahvazi, B. C. (2020) · Springer eBooks · doi:10.1007/978-3-030-11155-7_19-1
Chiroptical Polymer Functionalized by Chiral Nanofibrillar Network
Ihara, H., Takafuji, M., & Kuwahara, Y. (2021) · IntechOpen eBooks · doi:10.5772/intechopen.96853
Pré-tratamentos bioquímicos para isolamento de celulose nanofibrilada
Berto, G. L. (2020) · Digital Library of Theses and Dissertations (Universidade de São Paulo) · doi:10.11606/t.97.2020.tde-05082021-173225
Low, I. M., Alomayri, T. S., & Assaedi, H. S. (2021) · Composites science and technology · doi:10.1007/978-981-16-2281-6_4
Nanocellulose for Sustainable Future Applications
AI-Jawhari, I. F. H. (2021) · Springer eBooks · doi:10.1007/978-3-030-36268-3_16
Kitagawa, K. (2007) · Seikei-Kakou · doi:10.4325/seikeikakou.19.208
A finger-jointing model for describing nanostructures of cellulose microfibrilsPreprint
Fugetsu, B., Vipin, A. K., Takiguchi, S., Sakata, I., & Endo, M. (2021) · Research Square · doi:10.21203/rs.3.rs-145491/v1
Thapliyal, B. P., Tyagi, S., Gupta, M. K., & Salwan, K. (2022) · Encyclopedia of Green Materials · doi:10.1007/978-981-16-4921-9_181-1
Yang, K. Y., Li, J., Wloch, D., & Lee, K. (2023) · SSRN Electronic Journal · doi:10.2139/ssrn.4641367
Graft Copolymerization of Acrylonitrile onto Banana Cellulose Fiber
Kusumadevi, S., Nanjundaswamy, N., Shivakumara, L. R., Seshan, T. N., & Demappa, T. (2024) · Asian Journal of Chemistry · doi:10.14233/ajchem.2024.31072
Co-reinforcement of paper wet strength by refiner-treated pulp and NaOH treatment
Liu, H., Abe, K., Hiroshi, T. A. N. I., & Yano, H. (2024) · Journal of Materials Science · doi:10.1007/s10853-024-09920-x
“Therefore, refiners are sometimes used to pretreat pulp when producing CNFs using other devices such as homogenizers [14, 15] or grinders [16].”
Self-citationThapliyal, B. P., Tyagi, S., Gupta, M. K., & Salwan, K. (2024) · Encyclopedia of Green Materials · doi:10.1007/978-981-97-4618-7_181
Water-Jet Technology for Cellulose Nano-fiber Manufacturing
Ogura, K., & Sawamura, N. (2025) · Elsevier eBooks · doi:10.1016/b978-0-323-95486-0.00040-5
Lipa, A. D. C. (2024) · Digital Library of Theses and Dissertations (Universidade de São Paulo) · doi:10.11606/d.18.2024.tde-10022025-160621
Large-area TEM imaging for characterization of fibrillated cellulose across microscale to nanoscale
Koizumi, H., Kitagawa, T., Okubo, K., Kozono, T., & Kose, R. (2025) · Cellulose · doi:10.1007/s10570-025-06863-7
Assessment of environmental sustainability
Ifte, M. R. I., Ahmed, M., Chowdhury, F. I., Rahman, M. R., & Bakri, M. K. B. (2025) · Elsevier eBooks · doi:10.1016/b978-0-443-33643-0.00003-x
Green and sustainable nanocellulose production
Abdelhamid, H. N. (2025) · Elsevier eBooks · doi:10.1016/b978-0-443-29131-9.00004-9
Gulipalli, P., Mallineni, C. B., Adusumalli, R. B., & Pal, R. K. (2025) · ACS Omega · doi:10.1021/acsomega.5c09299
Synthesis and characterization of new polymeric materials for advanced applications
Sanna, R. (2014) · UnissResearch (Università degli Studi di Sassari)
Characterization of non-processed and processed dietary fibers
Mhamadi, M. (2022) · Corpus Université Laval (Université Laval)
Fibrilloitujen nanoselluloosarakenteiden valmistusmenetelmät ja lujuusominaisuudet
Kemppainen, M. (2018) · Aaltodoc (Aalto University)
Biopolymeric particles and their potential industrial applications
SafariMohsenabad, S. (2016) · doi:10.82308/743
矢野, 浩., & Abe, K. (2012) · Institutional Repositories DataBase (IRDB)
Desenvolvimento e caracterização de uma palmilha pediátrica
Pires, J. I. C. (2017) · Portuguese National Funding Agency for Science, Research and Technology (RCAAP Project by FCT)
Woehl, M. A. (2014) · LA Referencia (Red Federada de Repositorios Institucionales de Publicaciones Científicas)
植物由来を異にするセルロースナノファイバーを利用した環境調和型ナノ複合材料の創製
延田, 紘., & ノブタ, コ. (2015) · Institutional Repositories DataBase (IRDB)
George, J. (2019) · OhioLink ETD Center (Ohio Library and Information Network)
Weather resistance nanocellulose paper for structural applications
Kuru, H. (2023) · LUTPub (LUT University)
Funcionalização de nanocelulose de celulose bacteriana com colágeno hidrolisado
Giraldo, G. A. G. (2016) · Americanae (AECID Library)
Analyse physique des sauces de couchage à base de micronanocellulose fibrillée
Tibouda, A. (2020) · e-Theses (Université du Québec à Trois-Rivières)
Eficiência energética do processo top-down na produção de nanofibrilas de celulose.
Ribes, D. D., MARQUES, V. D., ZANATTA, P., MAGALHAES, W. L. E., BELTRAME, R., & GATTO, D. A. (2017) · Portuguese National Funding Agency for Science, Research and Technology (RCAAP Project by FCT)
Peces, R. A. (2016) · Queen Mary Research Online (Queen Mary University of London)
Production Evaluation and Characterization of Cellulose Nanofibrils.
Ribes, D. D. (2017) · LA Referencia (Red Federada de Repositorios Institucionales de Publicaciones Científicas)
Lignin-Rich Microfibrillated Cellulose Films : From Production to Application
Li, H. (2024) · KTH Publication Database DiVA (KTH Royal Institute of Technology)
Nanocellulose for Sustainable Future Applications
AI-Jawhari, I. F. H. (2026) · Springer eBooks · doi:10.1007/978-3-030-11155-7_16-2
Nanotechnology for Sustainable Paper and Forest Management
Singh, D., Singh, A. K., & Hasan, Z. (2026) · Smart nanomaterials technology · doi:10.1007/978-981-95-3473-9_16
Sustainable Lignocellulosic Nanomaterials for Future Green Applications
Ngo, T.-D., Chandra, R. P., & Ahvazi, B. C. (2026) · Springer eBooks · doi:10.1007/978-3-030-11155-7_19-2
The effect of flax fiber additives on the strength of gypsum-based construction composites
Razgovorov, P., Dobrokhotov, V., Kozhukhov, V., Bakanov, M. O., & Davydov, I. (2026) · Smart composite in construction · doi:10.52957/2782-1919-2026-7-1-30-42
Modifying the surface of nanocellulose to impart active properties
Saini, S. (2015) · theses.fr (ABES) · doi:10.70675/56926c94zfa0cz43d7z8a54z61c8670d4bed
Posidonia waste valorisation for the production of high added-value bio-based materials
Khadraoui, M. (2022) · theses.fr (ABES) · doi:10.70675/f7f7a10az4d02z45f1z936fz46cc45306d09
Mikro- ja nanofibrillikomposiittipapereiden valmistuspotentiaali
Rantanen, J. (2016) · Aaltodoc (Aalto University)
Native cellulose nanosheets from Japanese Cedar via mild delignification and mild homogenizationPreprint
Imai, M., Suzuki, S., Nakamura, Y., Isozaki, K., Kishimoto, M., Ueyama, Y., Matsumura, H., & Nakamura, M. (2026) · Research Square · doi:10.21203/rs.3.rs-9423095/v1
Treatment of wood-based residues for the use in biocomposites
Hofbauer, C. (2026) · reposiTUm (TU Wien) · doi:10.34726/hss.2026.133285
Alternatives d'amélioration de la ductilité et la ténacité des composites bois-polypropylène
Abdelmoula, K. (2019) · Depositum (Université du Québec en Abitibi-Témiscamingue)
Adachi, M., Okahisa, Y., & Sugahara, T. (2026) · Heat and Mass Transfer · doi:10.1007/s00231-026-03708-2
“The nanocellulose-polymer composites using microfibrillated cellulose (MFC) derived from kraft pulp showed high-strength mechanical properties [2] and light weight high strength featured applications were suggested [3 ].”
박테리아 셀룰로오스 기반 기능성 나노복합체의 제조와 특성 및 응용 연구
박민성 (2016) · Seoul National University Open Repository (Seoul National University)
Valorizing algal cellulose from brown seaweed Sargassum johnstonii for sustainable papermaking
Goyal, M., Prabhjot, K. A. U. R., Kumar, P., Bhardwaj, S., Singh, N., & Sharma, J. (2026) · Biomass Conversion and Biorefinery · doi:10.1007/s13399-026-07251-2 · Cited by 1
“Addition - ally, fibrillation improves stress transfer throughout the paper structure and contributes to higher tensile strength, burst strength, TEA index,and breaking length by increas - ing the contact area between adjacent fibers and improving fiber conformability [34, 36, 37].”
Metadata
- Authors
- Nakagaito, A. N., & Yano, H.
- Affiliations
- Kyoto University (JP)
- Corresponding author
- Yano, H.
- Venue
- Applied Physics A: Materials Science & Processing
- Published
- 2004-03-01
- Volume
- 78
- Issue
- 4
- Pages
- 547-552
- ISSN
- 0947-8396 (ISSN-L)
- 1432-0630
- OpenAlex
- W2035264658
- Cited by
- 608
- References
- 2
- Citations by year
- 2026: 9 · 2025: 14 · 2024: 22 · 2023: 23 · 2022: 37 · 2021: 43 · 2020: 42 · 2019: 35 · 2018: 37 · 2017: 40 · 2016: 33 · 2015: 43 · 2014: 35 · 2013: 37 · 2012: 29
- FWCI
- 8.59
- Type
- journal article
- Language
- en
- Open access
- Licence
- cc-by-nc-nd
- www.springer.com/tdm (tdm)
- Locations
- Applied Physics A (publishedVersion)
- Institutional Repositories DataBase (IRDB) (submittedVersion, cc-by-nc-nd)
- Topics
- Physical Sciences › Materials Science › Polymers and Plastics › Natural Fiber Reinforced Composites
- Physical Sciences › Materials Science › Biomaterials › Advanced Cellulose Research Studies
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Material Properties and Processing
- Keywords
- kraft pulp, natural fiber composites, phenolic resin, high-pressure homogenization, pulp refining, mechanical properties, flexural strength, water retention, surface area, cellulose nanocomposites
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.