The DOI matches its Crossref record; 10 of the 10 references it cites were found in a registry or an index.
Fine-structured aluminium products with controllable texture by selective laser melting of pre-alloyed AlSi10Mg powder
Open accessAbstract
This study shows that AlSi10Mg parts with an extremely fine microstructure and a controllable texture can be obtained through selective laser melting (SLM). Selective laser melting creates complex functional products by selectively melting powder particles of a powder bed layer after layer using a high-energy laser beam. The high-energy density applied to the material and the additive character of the process result in a unique material structure. To investigate this material structure, cube-shaped SLM parts were made using different scanning strategies and investigated by microscopy, X-ray diffraction and electron backscattered diffraction. The experimental results show that the high thermal gradients occurring during SLM lead to a very fine microstructure with submicron-sized cells. Consequently, the AlSi10Mg SLM products have a high hardness of 127 ± 3 Hv0.5 even without the application of a precipitation hardening treatment. Furthermore, due to the unique solidification conditions and the additive character of the process, a morphological and crystallographic texture is present in the SLM parts. Thanks to the knowledge gathered in this paper on how this texture is formed and how it depends on the process parameters, this texture can be controlled. A strong fibrous 〈1 0 0〉 texture can be altered into a weak cube texture along the building and scanning directions when a rotation of 90° of the scanning vectors within or between the layers is applied.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Texture Analysis with MTEX – Free and Open Source Software Toolbox
Bachmann, F., Hielscher, R., & Schaeben, H. (2010) · Solid State Phenomena · doi:10.4028/www.scientific.net/ssp.160.63 · Cited by 2,741
Consolidation phenomena in laser and powder-bed based layered manufacturing
Kruth, J.-P., Levy, G., Klocke, F., & Childs, T. H. C. (2007) · CIRP Annals · doi:10.1016/j.cirp.2007.10.004 · Cited by 1,444
Self-citationBrandl, E., Heckenberger, U., Holzinger, V., & Buchbinder, D. (2012) · Materials & Design · doi:10.1016/j.matdes.2011.07.067 · Cited by 1,151
Selective laser melting of aluminium components
Louvis, E., Fox, P., & Sutcliffe, C. J. (2011) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2010.09.019 · Cited by 933
Wenk, H.-R. (2002) · Reviews in Mineralogy and Geochemistry · doi:10.2138/gsrmg.51.1.291 · Cited by 931
High Power Selective Laser Melting (HP SLM) of Aluminum Parts
Buchbinder, D., Schleifenbaum, H., Heidrich, S., Meiners, W., & Bültmann, J. (2011) · Physics Procedia · doi:10.1016/j.phpro.2011.03.035 · Cited by 666
Wenk, H. R., & Houtte, P. V. (2004) · Reports on Progress in Physics · doi:10.1088/0034-4885/67/8/r02 · Cited by 508
A pragmatic model for selective laser melting with evaporation
Verhaeghe, F., Craeghs, T., Heulens, J., & Pandelaers, L. (2009) · Acta Materialia · doi:10.1016/j.actamat.2009.08.027 · Cited by 308
Evolution of microstructure in laser deposited Al–11.28%Si alloy
Dinda, G. P., Dasgupta, A. K., & Mazumder, J. (2011) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2011.09.051 · Cited by 190
Selective laser melting of heat transfer devices
Wong, M., Tsopanos, S., Sutcliffe, C. J., & Owen, I. (2007) · Rapid Prototyping Journal · doi:10.1108/13552540710824797 · Cited by 171
Cited by
Additive manufacturing of metallic components – Process, structure and properties
DebRoy, T., Wei, H. L., Zuback, J. S., Mukherjee, T., Elmer, J. W., Milewski, J. O., Beese, A. M., Wilson-Heid, A., De, A., & Zhang, W. (2018) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.10.001 · Cited by 8,805
Additive manufacturing of metals
Herzog, D., Seyda, V., Wycisk, E., & Emmelmann, C. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.07.019 · Cited by 4,759
Khairallah, S. A., Anderson, A. T., Rubenchik, A., & King, W. E. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.02.014 · Cited by 2,766
The metallurgy and processing science of metal additive manufacturing
Sames, W. J., List, F. A., Pannala, S., Dehoff, R. R., & Babu, S. S. (2016) · International Materials Reviews · doi:10.1080/09506608.2015.1116649 · Cited by 2,529
Material-structure-performance integrated laser-metal additive manufacturing
Gu, D., Shi, X., Poprawe, R., Bourell, D. L., Setchi, R., & Zhu, J. (2021) · Science · doi:10.1126/science.abg1487 · Cited by 1,703
Aboulkhair, N. T., Simonelli, M., Parry, L., Ashcroft, I., Tuck, C., & Hague, R. (2019) · Progress in Materials Science · doi:10.1016/j.pmatsci.2019.100578 · Cited by 1,552
Kok, Y., Tan, X. P., Wang, P., Nai, M. L. S., Loh, N. H., Liu, E., & Tor, S. B. (2018) · Materials & Design · doi:10.1016/j.matdes.2017.11.021 · Cited by 1,447
Reducing porosity in AlSi10Mg parts processed by selective laser melting
Aboulkhair, N. T., Everitt, N. M., Ashcroft, I., & Tuck, C. (2014) · Additive Manufacturing · doi:10.1016/j.addma.2014.08.001 · Cited by 1,281
Read, N., Wang, W., Essa, K., & Attallah, M. M. (2015) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2014.09.044 · Cited by 1,218
Zhang, J., Song, B., Wei, Q., Bourell, D., & Shi, Y. (2019) · Journal of Materials Science & Technology · doi:10.1016/j.jmst.2018.09.004 · Cited by 1,205
Materials for additive manufacturing
Bourell, D., Kruth, J. P., Leu, M., Levy, G., Rosen, D., Beese, A. M., & Clare, A. (2017) · CIRP Annals · doi:10.1016/j.cirp.2017.05.009 · Cited by 1,034
Self-citationSanaei, N., & Fatemi, A. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100724 · Cited by 1,029
Defect formation mechanisms in selective laser melting: a review
Zhang, B., Li, Y., & Bai, Q. (2017) · Chinese Journal of Mechanical Engineering · doi:10.1007/s10033-017-0121-5 · Cited by 924
Li, W., Li, S., Liu, J., Zhang, A., Zhou, Y., Wei, Q., Yan, C., & Shi, Y. (2016) · Materials Science and Engineering: A · doi:10.1016/j.msea.2016.03.088 · Cited by 850
Mechanical Properties of AlSi10Mg Produced by Selective Laser Melting
Kempen, K., Thijs, L., Van Humbeeck, J., & Kruth, J.-P. (2012) · Physics Procedia · doi:10.1016/j.phpro.2012.10.059 · Cited by 849
Self-citationGokuldoss, P. K., Kolla, S., & Eckert, J. (2017) · Materials · doi:10.3390/ma10060672 · Cited by 804
Prashanth, K. G., Scudino, S., Klauss, H. J., Surreddi, K. B., Löber, L., Wang, Z., Chaubey, A. K., Kühn, U., & Eckert, J. (2014) · Materials Science and Engineering: A · doi:10.1016/j.msea.2013.10.023 · Cited by 803
Chowdhury, S., Yadaiah, N., Prakash, C., Ramakrishna, S., Dixit, S., Gupta, L. R., & Buddhi, D. (2022) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2022.07.121 · Cited by 784
Selective laser melting of stainless steel 316L with low porosity and high build rates
Sun, Z., Tan, X., Tor, S. B., & Yeong, W. Y. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.05.035 · Cited by 714
Aboulkhair, N. T., Maskery, I., Tuck, C., Ashcroft, I., & Everitt, N. M. (2016) · Materials Science and Engineering: A · doi:10.1016/j.msea.2016.04.092 · Cited by 675
On the fatigue crack growth behavior in 316L stainless steel manufactured by selective laser melting
Riemer, A., Leuders, S., Thöne, M., Richard, H. A., Tröster, T., & Niendorf, T. (2014) · Engineering Fracture Mechanics · doi:10.1016/j.engfracmech.2014.03.008 · Cited by 669
Fayazfar, H., Salarian, M., Rogalsky, A., Sarker, D., Russo, P., Paserin, V., & Toyserkani, E. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.02.018 · Cited by 665
Li, X. P., Wang, X. J., Saunders, M., Suvorova, A., Zhang, L. C., Liu, Y. J., Fang, M. H., Huang, Z. H., & Sercombe, T. B. (2015) · Acta Materialia · doi:10.1016/j.actamat.2015.05.017 · Cited by 654
Prediction of lack-of-fusion porosity for powder bed fusion
Tang, M., Pistorius, P. C., & Beuth, J. L. (2017) · Additive Manufacturing · doi:10.1016/j.addma.2016.12.001 · Cited by 620
Li, Y., Feng, Z., Hao, L., Huang, L., Xin, C., Wang, Y., Bilotti, E., Essa, K., Zhang, H., Li, Z., et al. (2020) · Advanced Materials Technologies · doi:10.1002/admt.201900981 · Cited by 614
Additive manufacturing of functionally graded materials: A review
Zhang, C., Chen, F., Huang, Z., Jia, M., Chen, G., Ye, Y., Lin, Y., Liu, W., Chen, B., Shen, Q., et al. (2019) · Materials Science and Engineering: A · doi:10.1016/j.msea.2019.138209 · Cited by 612
Yu, W. H., Sing, S. L., Chua, C. K., Kuo, C. N., & Tian, X. L. (2019) · Progress in Materials Science · doi:10.1016/j.pmatsci.2019.04.006 · Cited by 586
Formation and reduction of hydrogen porosity during selective laser melting of AlSi10Mg
Weingarten, C., Buchbinder, D., Pirch, N., Meiners, W., Wissenbach, K., & Poprawe, R. (2015) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2015.02.013 · Cited by 585
Attar, H., Bönisch, M., Calin, M., Zhang, L.-C., Scudino, S., & Eckert, J. (2014) · Acta Materialia · doi:10.1016/j.actamat.2014.05.022 · Cited by 585
Change in microstructure of selectively laser melted AlSi10Mg alloy with heat treatments
Takata, N., Kodaira, H., Sekizawa, K., Suzuki, A., & Kobashi, M. (2017) · Materials Science and Engineering: A · doi:10.1016/j.msea.2017.08.029 · Cited by 574
Dehoff, R. R., Kirka, M. M., Sames, W. J., Bilheux, H., Tremsin, A. S., Lowe, L. E., & Babu, S. S. (2015) · Materials Science and Technology · doi:10.1179/1743284714y.0000000734 · Cited by 555
Suryawanshi, J., Prashanth, K. G., Scudino, S., Eckert, J., Prakash, O., & Ramamurty, U. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.06.009 · Cited by 549
Casati, R., Lemke, J., & Vedani, M. (2016) · Journal of Materials Science & Technology · doi:10.1016/j.jmst.2016.06.016 · Cited by 542
Heat treatment for metal additive manufacturing
Laleh, M., Sadeghi, E., Revilla, R. I., Chao, Q., Haghdadi, N., Hughes, A. E., Xu, W., De Graeve, I., Qian, M., Gibson, I., et al. (2023) · Progress in Materials Science · doi:10.1016/j.pmatsci.2022.101051 · Cited by 538
Mechanistic models for additive manufacturing of metallic components
Wei, H. L., Mukherjee, T., Zhang, W., Zuback, J. S., Knapp, G. L., De, A., & DebRoy, T. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100703 · Cited by 530
Selective laser melting (SLM) of AlSi12Mg lattice structures
Leary, M., Mazur, M., Elambasseril, J., McMillan, M., Chirent, T., Sun, Y., Qian, M., Easton, M., & Brandt, M. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.02.127 · Cited by 525
Romano, S., Brückner-Foit, A., Brandão, A., Gumpinger, J., Ghidini, T., & Beretta, S. (2018) · Engineering Fracture Mechanics · doi:10.1016/j.engfracmech.2017.11.002 · Cited by 521
Highly Anisotropic Steel Processed by Selective Laser Melting
Niendorf, T., Leuders, S., Riemer, A., Richard, H. A., Tröster, T., & Schwarze, D. (2013) · Metallurgical and Materials Transactions B · doi:10.1007/s11663-013-9875-z · Cited by 506
Trevisan, F., Calignano, F., Lorusso, M., Pakkanen, J., Aversa, A., Ambrosio, E., Lombardi, M., Fino, P., & Manfredi, D. (2017) · Materials · doi:10.3390/ma10010076 · Cited by 502
Metallurgy, mechanistic models and machine learning in metal printing
DebRoy, T., Mukherjee, T., Wei, H. L., Elmer, J. W., & Milewski, J. O. (2020) · Nature Reviews Materials · doi:10.1038/s41578-020-00236-1 · Cited by 497
Defects and anomalies in powder bed fusion metal additive manufacturing
Mostafaei, A., Zhao, C., He, Y., Reza Ghiaasiaan, S., Shi, B., Shao, S., Shamsaei, N., Wu, Z., Kouraytem, N., Sun, T., et al. (2022) · Current Opinion in Solid State and Materials Science · doi:10.1016/j.cossms.2021.100974 · Cited by 491
Wang, J., Zhu, R., Liu, Y., & Zhang, L. (2023) · Advanced Powder Materials · doi:10.1016/j.apmate.2023.100137 · Cited by 484
Fatigue life of additively manufactured Ti–6Al–4V in the very high cycle fatigue regime
Günther, J., Krewerth, D., Lippmann, T., Leuders, S., Tröster, T., Weidner, A., Biermann, H., & Niendorf, T. (2017) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2016.05.018 · Cited by 475
Wauthle, R., Vrancken, B., Beynaerts, B., Jorissen, K., Schrooten, J., Kruth, J.-P., & Van Humbeeck, J. (2015) · Additive Manufacturing · doi:10.1016/j.addma.2014.12.008 · Cited by 463
Self-citationIs the energy density a reliable parameter for materials synthesis by selective laser melting?
Prashanth, K. G., Scudino, S., Maity, T., Das, J., & Eckert, J. (2017) · Materials Research Letters · doi:10.1080/21663831.2017.1299808 · Cited by 418
Processing AlSi10Mg by selective laser melting: Parameter optimisation and material characterisation
Kempen, K., Thijs, L., Van Humbeeck, J., & Kruth, J.-P. (2015) · Materials Science and Technology · doi:10.1179/1743284714y.0000000702 · Cited by 410
Self-citationKimura, T., & Nakamoto, T. (2016) · Materials & Design · doi:10.1016/j.matdes.2015.10.065 · Cited by 404
Multi-scale defects in powder-based additively manufactured metals and alloys
Fu, J., Li, H., Song, X., & Fu, M. W. (2022) · Journal of Materials Science & Technology · doi:10.1016/j.jmst.2022.02.015 · Cited by 391
Buchbinder, D., Meiners, W., Pirch, N., Wissenbach, K., & Schrage, J. (2014) · Journal of Laser Applications · doi:10.2351/1.4828755 · Cited by 390
Qiu, C., Yue, S., Adkins, N. J. E., Ward, M., Hassanin, H., Lee, P. D., Withers, P. J., & Attallah, M. M. (2015) · Materials Science and Engineering: A · doi:10.1016/j.msea.2015.01.031 · Cited by 385
Defining the tensile properties of Al-12Si parts produced by selective laser melting
Prashanth, K. G., Scudino, S., & Eckert, J. (2017) · Acta Materialia · doi:10.1016/j.actamat.2016.12.044 · Cited by 382
Sola, A., & Nouri, A. (2019) · Journal of Advanced Manufacturing and Processing · doi:10.1002/amp2.10021 · Cited by 378
Fracture and fatigue in additively manufactured metals
Becker, T. H., Kumar, P., & Ramamurty, U. (2021) · Acta Materialia · doi:10.1016/j.actamat.2021.117240 · Cited by 377
Simonelli, M., Tuck, C., Aboulkhair, N. T., Maskery, I., Ashcroft, I., Wildman, R. D., & Hague, R. (2015) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-015-2882-8 · Cited by 342
Choo, H., Sham, K.-L., Bohling, J., Ngo, A., Xiao, X., Ren, Y., Depond, P. J., Matthews, M. J., & Garlea, E. (2019) · Materials & Design · doi:10.1016/j.matdes.2018.12.006 · Cited by 333
Tradowsky, U., White, J., Ward, R. M., Read, N., Reimers, W., & Attallah, M. M. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.05.066 · Cited by 332
Design and advanced manufacturing of electromagnetic interference shielding materials
Liu, J., Yu, M.-Y., Yu, Z.-Z., & Nicolosi, V. (2023) · Materials Today · doi:10.1016/j.mattod.2023.03.022 · Cited by 332
Rao, H., Giet, S., Yang, K., Wu, X., & Davies, C. H. J. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.07.009 · Cited by 331
Yan, C., Hao, L., Hussein, A., Young, P., Huang, J., & Zhu, W. (2015) · Materials Science and Engineering: A · doi:10.1016/j.msea.2015.01.063 · Cited by 329
Aboulkhair, N. T., Maskery, I., Tuck, C., Ashcroft, I., & Everitt, N. M. (2016) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2015.11.016 · Cited by 329
Sing, S. L., Huang, S., Goh, G. D., Goh, G. L., Tey, C. F., Tan, J. H. K., & Yeong, W. Y. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2021.100795 · Cited by 328
Liu, Q., Wu, H., Paul, M. J., He, P., Peng, Z., Gludovatz, B., Kruzic, J. J., Wang, C. H., & Li, X. (2020) · Acta Materialia · doi:10.1016/j.actamat.2020.10.010 · Cited by 321
Kanagarajah, P., Brenne, F., Niendorf, T., & Maier, H. J. (2013) · Materials Science and Engineering: A · doi:10.1016/j.msea.2013.09.025 · Cited by 318
Main defects observed in aluminum alloy parts produced by SLM: From causes to consequences
Galy, C., Le Guen, E., Lacoste, E., & Arvieu, C. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2018.05.005 · Cited by 318
Maskery, I., Aboulkhair, N. T., Corfield, M. R., Tuck, C., Clare, A. T., Leach, R. K., Wildman, R. D., Ashcroft, I. A., & Hague, R. J. M. (2016) · Materials Characterization · doi:10.1016/j.matchar.2015.12.001 · Cited by 317
Maamoun, A. H., Xue, Y. F., Elbestawi, M. A., & Veldhuis, S. C. (2018) · Materials · doi:10.3390/ma11122343 · Cited by 311
Lou, X., Andresen, P. L., & Rebak, R. B. (2018) · Journal of Nuclear Materials · doi:10.1016/j.jnucmat.2017.11.036 · Cited by 310
Recent advances in grain refinement of light metals and alloys
Easton, M. A., Qian, M., Prasad, A., & StJohn, D. H. (2016) · Current Opinion in Solid State and Materials Science · doi:10.1016/j.cossms.2015.10.001 · Cited by 308
Wei, P., Wei, Z., Chen, Z., Du, J., He, Y., Li, J., & Zhou, Y. (2017) · Applied Surface Science · doi:10.1016/j.apsusc.2017.02.215 · Cited by 307
Fatigue of AlSi10Mg specimens fabricated by additive manufacturing selective laser melting (AM-SLM)
Uzan, N. E., Shneck, R., Yeheskel, O., & Frage, N. (2017) · Materials Science and Engineering: A · doi:10.1016/j.msea.2017.08.027 · Cited by 302
Zhao, L., Song, L., Santos Macías, J. G., Zhu, Y., Huang, M., Simar, A., & Li, Z. (2022) · Additive Manufacturing · doi:10.1016/j.addma.2022.102914 · Cited by 292
Textures formed in a CoCrMo alloy by selective laser melting
Zhou, X., Li, K., Zhang, D., Liu, X., Ma, J., Liu, W., & Shen, Z. (2015) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2015.01.096 · Cited by 291
Jafari, D., & Wits, W. W. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2018.03.109 · Cited by 289
On the Precipitation Hardening of Selective Laser Melted AlSi10Mg
Aboulkhair, N. T., Tuck, C., Ashcroft, I., Maskery, I., & Everitt, N. M. (2015) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-015-2980-7 · Cited by 286
Tapia, G., Khairallah, S., Matthews, M., King, W. E., & Elwany, A. (2018) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-017-1045-z · Cited by 284
Fousová, M., Dvorský, D., Michalcová, A., & Vojtěch, D. (2018) · Materials Characterization · doi:10.1016/j.matchar.2018.01.028 · Cited by 283
Additive manufacturing of magnetic materials
Chaudhary, V., Mantri, S. A., Ramanujan, R. V., & Banerjee, R. (2020) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100688 · Cited by 275
Uzan, N. E., Ramati, S., Shneck, R., Frage, N., & Yeheskel, O. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2018.03.030 · Cited by 274
Thermal post-processing of AlSi10Mg parts produced by Selective Laser Melting using recycled powder
Maamoun, A. H., Elbestawi, M., Dosbaeva, G. K., & Veldhuis, S. C. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2018.03.014 · Cited by 270
Rapid Solidification: Selective Laser Melting of AlSi10Mg
Tang, M., Pistorius, P. C., Narra, S., & Beuth, J. L. (2016) · JOM · doi:10.1007/s11837-015-1763-3 · Cited by 260
AlMangour, B., Grzesiak, D., & Yang, J.-M. (2017) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2017.08.022 · Cited by 259
Abd-Elaziem, W., Elkatatny, S., Abd-Elaziem, A.-E., Khedr, M., Abd El-baky, M. A., Hassan, M. A., Abu-Okail, M., Mohammed, M., Järvenpää, A., Allam, T., et al. (2022) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2022.07.085 · Cited by 257
Girelli, L., Tocci, M., Gelfi, M., & Pola, A. (2019) · Materials Science and Engineering: A · doi:10.1016/j.msea.2018.10.026 · Cited by 255
Muhammad, W., Brahme, A. P., Ibragimova, O., Kang, J., & Inal, K. (2021) · International Journal of Plasticity · doi:10.1016/j.ijplas.2020.102867 · Cited by 149
Mahmood, M. A., Chioibasu, D., Ur Rehman, A., Mihai, S., & Popescu, A. C. (2022) · Metals · doi:10.3390/met12010077 · Cited by 119
Narra, S. P. (2022) · Encyclopedia of Materials: Metals and Alloys · doi:10.1016/b978-0-12-819726-4.00107-1 · Cited by 9
Pratap Singh, S., Kumar Gupta, R., Agarwal, A., & Govind (2022) · Materials Today: Proceedings · doi:10.1016/j.matpr.2022.08.004 · Cited by 4
Metadata
- Authors
- Thijs, L., Kempen, K., Kruth, J.-P., & Van Humbeeck, J.
- Venue
- Acta Materialia
- Publisher
- Elsevier BV
- Published
- 2013-03
- Volume
- 61
- Issue
- 5
- Pages
- 1809-1819
- ISSN
- 1359-6454 (ISSN-L)
- OpenAlex
- W1965238929
- Cited by
- 1,917
- References
- 10
- FWCI
- 49.00
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.